How Do I Know If Schedule Shutdown Occurs?
Dear Forum
ive scheduled a shutdown of my machine each night at midnight and for it to restart at 6am. its not a sleep but a full shutdown. daft question possibly but how do i know if its done what i ask if i'm not up at these times? is there anything to monitor the activity or somethign i can see where it tells me the machine shut down and woke as commanded?
i'm using the built in scheduler in Power Options... does this work well? i see lots of people do teminal commands via a script. Would that be a better way to go?
a late addition to this problem...
I've initiated this because my machine ,which sits on a static IP, seems to lose connectivity after a few days of being on. I work away and access it remotely. once it loses connectivity, i cant access it. i cant remote reboot it anything so have to wait until the weekend to reset it. My wife at home cant access any of the films that stream to devices on it either.
the daily reboot works most of the time, but now i find that if it doesn't shut down properly, receives an error on shutting down, or something else very minor, i'm still left without the ability to access it, as I am at this moment. Wife wants to watch a film with the children and Mini is nowhere to be seen. i try and logon and its not responding. I know that in its shutdown last night it must have come up with an error and is probably waiting for me to log on within the same network to view. Oddly, ive just Teamviewered into the my wives machine which is on the same network and the Mini isnt viewable on her machine either?!?!?!
any ideas on a process to adopt to get around this?
Similar Messages
-
Help with : How Can I know the schedule for a JOB, and How Can I Change?
Hi
I have a job and I know the name...I review in table TBTCO and I saw that this jobs is schedule at 11:00 AM and at 4:00 PM, but I need to change the schedule for this job..and that this job will execute al least four times during the day...I don´t know how can I change the schedule??
I was thinking that if I run the transaction directly I can run, Im not sure, because I try to do in QAS environment... I when I try to run the program..the system doesn´t do anything..this mean I cant execute with F8, such as if I should be complete a parameter, but all the fields are completed.
Thank you for your help, I promese that I will gice you points for your help.
AliceThank you at all.
I was reviewing the options that you send me, but Im confused about... if its possible edit the schedule that this job has in this moment, because if I enter the transaction SM36 or try to see SM37..in production environment I can´t see this schedule...
And Im not sure to do the correct steps to create something new... in QAS environment..I can´´t see this job.
All of yours help are really important
Thank you again!
Alice -
Am trying to update software through "Software Update" on my iMac (latest Lion operating system).
I keep getting message "An error has occurred. The request timed out"
How do I know if there are software dates available to down load.
ErnieTwo things, bushmanernie (love the name)
First what version of Lion are you running and have you downloaded any Combo updates since you installed it.
Second; I see you only have 10.6.2 in your profile. You might like to update it.
I don't have Lion myself but I'm guessing you don't have the very latest version. You can check what should be available through the opening Apple support page > downloads. -
Hi how can i know the memory allocation of occurs 10 or 100
hii
experts,
how can i know how much memory is being allocated for for occurs n(10 ,100)
for an internal table declaration.is there any tcode to know that??
plz help.
thank youHi,
welcome to sdn,
Occurs 10 means the internal table allocates space for 10 rows initially....after filling these rows it allocates for the next 10 lines...similarly occurs 100.
But if you give occurs 0 ,the internal table allocates 8kb space initially...
these are the major difference....i think you can check the memory allocation of the internal table in the debugging mode instead of using a separate transaction...
<b>Reward points if helpful,</b>
regards,
Jinesh -
Scheduled shutdown no longer works in Keynote 4.0 iLife 08
Those of us using Keynote, a large LED monitor and a Mac Mini as a Digital signage system have found that the new Keynote 4.0 in iLife 08 will not allow a scheduled shutdown. This worked well under the old version.
We had been on iLife 06 and 10.4.9. We found that Keynote crashes every few days when you try and run a show 24/7 so we had used the energy saver settings to have it shut down at 1AM and restart at 2AM. This was working well, the only trick was to always name the current slide show the same thing and have Keynote auto launch at startup and run the slideshow.
Last week we reimaged a Mini with 10.4.10 and iLife 08 and put in place of the 10.4.9 ilife 06 mini, the first time it was suppose to shutdown it hung, there was an error on the screen that said "Keynote had canceled shutdown".
Testing proved the following:
Schedule shutdown does not work at all when a Keynote presentation is running. You get this error.
"The application Keynote canceled shutdown. To try again quit Keynote and choose shut down from the Apple menu"
It will auto shutdown and startup IF a Keynote slide show is NOT running.
It will do a scheduled shutdown if just the Keynote App is running.
If the Keynote app is running a normal shutdown command will work.
Does anyone know a work around or a fix?The thread "Keynote Cancelled Shutdown: how do I troubleshoot?" has recently posted a possible solution but is there an explanation or a fix planned?
-
How do we know that some of the jobs have been held up in the BW system.And
How do we know that some of the jobs have been held up in the BW system.And after we know that some of the jobs have been held up, how do we restart it?Please provide me an answer.It is very important.I will assign points
Regards,
PoonamHi,
Tcode sm37 is the place where you can see the background job status.
Jobs have been help up
as per my understanding
1) job has been triggered and kept it in hold
Now when a job has been triggered, and is kept in hold for its associated process, then you have to wait, becuse the target on which the job has been run is currently used by other and because of this the present job is kept in hold.
Also see the st22 for any shortdumps.
2) Job itself has not yet triggered
The jobs will be in released state and will not trigger, normally this occurs when that particular job is waiting for the event to trigger it, and probably the even has not yet triggered or even if triggered the communication mightnot have been made to the job to trigger. These situations can be attributed to many things lyk system performance, or some internal comm failure, some DB dead locks etc.,.
Now for the first one, start the job immediately with high priority ( if required ) and once completed reschedule it again as normally it is running
for the second , you can trigger the particular event in sm64 and c has the job came to active state or not.
or else you can copy the job and schedule is immediately.
Hope this helps
Janardhan Kumar -
HT1749 How do I know if have viruses in my Imac? Or maintain it in shape?
Or maintain it in shape?
There are no extant viruses affecting OS X.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.
Kappy's Personal Suggestions About Mac Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion, Apple has included built-in malware protection that is automatically updated as necessary. To assure proper protection, update your system software when Apple releases new OS X updates for your computer.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, Mountain Lion Cache Cleaner 7.0.9, Maintenance 1.6.8, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
If you are using Snow Leopard or earlier, then for emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
Repair the hard drive and permissions beforehand.
Update your backups in case an update goes bad.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. You can never have too many backups. Don't rely on just one. Make several using different backup utilities. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Final Suggestions
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional reading may be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.
Most if not all maintenance is for troubleshooting problems. If your computer is running OK, then there isn't really a thing you need to do except repair the hard drive and permissions before installing any new system updates. -
I have my MBP and iMac set up to shutdown every weekday (my GF likes to leave them on!!) but if they are already shutdown they start up just before their scheduled shutdown time and then shut themselves down, is this a common problem with Leopard? I don't see the point in starting up to shut down if it's already shutdown.
Does anyone know if there's a fix to this (apart from removing the scheduled shutdown)? Does anyone else have the same problem?Try trashing the Power Management preferences, restart and reset them to how you like.
You can find the file here:
Hard drive/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist -
Every time I login I get the message "aosnotifyd wants to use your confidential information stored in "my name" in your keychain." How do I know if it is safe to allow this? Can anyone advise please?
My immediate reaction is to deny.
Have you downloaded or installed any application that may relate to the abbreviation AOS? It may not necessarily be the application's name, could be the developer or distributor.
As it's occuring at log-in, go to System Preferences > Accounts > your account > Login Items and look for a related item. If there's one there, right-click (or ctrl click) on it and select Reveal in Finder. That will show you where the originator of the item is on your system and should give you more of a clue as to what it is.
I'd remove the item from login items anyway (highlight and click the minus sign at the bottom of the window). There shouldn't be anything trying to use your keychain info to notify anyone. -
How do I know external hard drive is working?
Sorry for the simplistic nature of the questions but here goes:
Purchased a Toshiba external hard drive - plugged it in and Time Machine asked a few questions and soon it asked if I wanted to back up my internal hard drive.
After 40 plus minutes the task was completed - it stopped doing whatever it was doing - that much I'm certain.
How do I know the Toshiba is continuing to back up material? The light on the Toshiba is 'on' at times and 'off' on other times - so it's backing material up when the light is on??? Automatically, on its own?
Time Machine and/or the Toshiba do not appear to have any schedule for routine back-up (such as one would find on an anti-virus application), is there a way to schedule a backup?
Under Time Machine preferences it shows the Toshiba as the external disk. Plus I just noticed that it states the next back up will be 8:34 am today - 22 minutes from right now. What an odd time and it isn't a time I selected, at least I don't think so!
How do I access the Toshiba to see what, if anything, it has backed up?
Finally, assuming the external has backed up all the important data and should my (brand new - but that's another story) hard drive crash, how do I get the computer to ignore the damaged internal hard drive and start using the Toshiba?
As you can tell these question would be easily answered by most anyone with a modicum of computer knowledge but for me, thank goodness for Apple Discussion!
Thanks in advance.
BobSee > Setting up Time Machine backups using an external drive
From Here > http://support.apple.com/kb/HT1427
More Info > Time Machine Tutorial
Bob13018 wrote:
... how do I get the computer to ignore the damaged internal hard drive and start using the Toshiba
This is Not how TM works... It is not a Bootable Clone... Read Here...
Time Machine vs. Clones and Archives -
McAfee program searches for programs that are susceptible to malware and automatically searched for updates and installs them. For some Reason, when it comes to Adobe products it requires myself to have to perform a manual update.
When I followed the link McAfee provides to the Adobe website and follow the steps to install the update....at one point it give you and option of an update that as the word "Full" in the middle of the Update Choice, and the 2nd option is exactly the same except instead of the word "Full", it has the word "Slim".
Nowhere (FAQs, etc) can I find the difference between the two, so how do I know which I need?
I have a Dell Laptop with Windows 8.1 operating system.
8GB Ram and I think its one of those Quad Drive things
1 TB Memory
I use Firefox as my internet operating system.
I started with Internet Explorer, but a problem existed that had something to do with that program not being loaded properly initially,
I tried to Get Microsoft Help but they wanted $149 to fix it, So I abandoned use of Internet Explorer and loaded Fire Fox.
I will note, I don't know if its germane or note, Since switching to Fire Fox, my system stalls quite frequently and I get a popup that says something about a Flash Program (maybe shockwave flash) and it states it is not responding. It gives me the option to continue or cancel and a check box to not ask me again. Though I select that check box I do get asked often.
When this Popup occurs, I can't use any of the internet windows I have open or any of the internet window Tabs I have open. It also seems to affect the one game I play (Spider) and it stalls that game also. I sense it has something to do with anything that has pictures on it possibly. After several minutes 3 to 5 plus it seems to recover
I'm sorry I am not real computer literate
Thank you for any help you can provide
Keith
PS All I am trying to do is get hold of Adobe to ask about their program, why I have to do all this registering and go into a Forum or Community (whatever those are) is confusing to me.The Full version includes all xtras and the Slim version just the bare essentials. I would recommend using the full version as your experience of using the plugin will be more seamless (no pausing while required xtras are downloaded on demand)
-
How can we know AR invoice is opended or closed?
Hi All,
I have a invoices(Receivables) data in 11.5.5. Now i would like to migrate open invoice or partially paid invoice to R12. How can we know that invoices(Receivables) is opened or closed.
Suggestions will be highly appreciated.
Thanks.
Edited by: user627525 on Feb 24, 2009 11:13 PMCan't an invoice have more than 1 payment schedule id?
Yes, an invoice can have more than 1 Payment schedule ID
If so, would they all have to be zero or closed?
We have to check by Payment schedule ID
Regards,
Sridhar -
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
Have Ipod Touch 2nd Gen. 64 gig. I noticed that my music will not play alphabetically anymore. Don't know exactly when this occured. I checked all my settings so doesn't seem to be that.Apple no longer is upgrading this unit..I use windows XP but don't believe this is an issue since i have read posts saying this is not the problem..right now am converting my higher bit rate music to see if that changes anything. I also turned off my unit and the next thing am going to do is a restore if this doesn't work. Anyone find a fix for this yet? I also see that this is not a unique problem to Gen 2 units and is occuring on newer units as well..thank you all for any advise...
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
How do I know if my device is data roaming?
I turned on the device in a remote area on the Canadian side of US-Canada border near MI. Seemed that it was picking up 3G signal as it displayed "3G Verizon connected". Does this mean it was not roaming. How do I know when it is roaming or not without waiting for billing to occur. Will it display an indicator when roaming? Please advise. Thanks.
Thanks for the tip. The device is the mobile hotspot, not a phone. Not sure if the display would differ but I didn't pay attention. Where I was there was no Canadian cell tower so I'm sure it was picking up US cell tower in MI. I was expecting an indicator or some sort of an alert if I was roaming. The usage on Verizon website does not indicate roaming or not. Is that normal? I will be sure to check for any triangle indicator if it works like a cell phone. Thanks.
Maybe you are looking for
-
'Your computer restarted because of a problem' ever since installing Yosemite
Hey guys, Ever since I installed OS X Yosemite my Macbook Pro late 2012 has crashed and restarted randomly about 10 times so far over the past few weeks. Theres no pattern with what seems to be causing this, one time I was watching something on Youtu
-
How to import/export in a MAC ???
Hello, I have a sony Cyber-shot camera and it is recognized and has no problems importing directly to Iphoto... Just now starting to play with IMovie so my ??? is thus; How do I export them to I movie I tried dragging to desktop and then launching im
-
How to enable versions feature in Details- Settingsof Km iview?
Hi Can any body pls help me on Vesrion history display in KM iview. How to make use of the feature Details->setting->versions of KM iview.When we click on this option it says that "Each time an item is saved or uploaded to the repository, a new versi
-
Not well formed XML data in XI
HELLO !! Can XI handle a non welll formed XMl messages as an input ? THANKS ~Peeru
-
Cannot change print settings, print on foto size
When I want to print a webpages the printer (HP6380) prints in the format 10 x 15 instaed of A4. I tried changing the settings in printermenu but it did not help...