How do I load data from R/3 into /BI0/TCUST_SALES

Hi,
There is a SAP supplied characteristic called 0CUST_SALES which has a text table called /BI0/TCUST_SALES. How do go about populating this table from the R/3 system? My version is BW 3.5
Thanks
Ram

Hi,
1.) Go into R/3 and run tcode RSA5.
2.) Expand all levels and search for 0customer_text and activate it.
3.) Go to RSA3, type in 0customer_text and execute it ... verify you get data.
4.) Go to BW and replicate your R/3 source system.
5.) Go to the Infosource tab, and look for 0customer.
6.) Right click on 0customer and assign a new datasource -- enter you R/3 source and select 0customer_text. Activate it.
7.) Add your infopackage and run it.
Brian

Similar Messages

Load data from XML files into BI

Hi All,
Can any one guide me through the steps which involve in loading data from XML files into BI?
Thanks
Santosh

Hi James,
I have followed upto step No: 12 .
Please could you let me know how to link the XML file on my local drive to BI,
I am not able to find figure out where to specify the path of the XML file to be loaded into BI.
Thanks In Advance
Regards,
San
1. Create a Infosource(ZIS), with transfer structure in accordance with the structure in the XML file. (You can open the XML file with MS Excel.This way you can get to know the structure).
2. Activate the transfer rules.
3. After activation ;from the Menu Bar , Select Extras>Create BW Datasource with SOAP connection.
4.Now Activate the Infosurce again, this creates an XML based Datasource(6AXXX...)
5.These steps would create two sub nodes under the Infosource(ZIS).
6.Select Myself system and create a data package and execute it run in Init mode(without Data Transfer).
7. This would create an entry in RSA7(BW delta Queue)
8. Again create another Delta Infopackage under it, and run it. Now the Datasource(6AXXXXXX..) would turn green in RSA7.
9.In Function builder(SE37) select your FM( do a search ,F4, on the datasource 6AXXX....) .
10.Inside this RFC based FM , from the Menu Bar select Utilities>more Utilities>Create Web services>From Function module.
11.A wizard will guide you through the next steps .
12.once this is done a Web serrvice would be enabled in WSADMIN. Select your FM and execute it.
13.From here you can upload the data from XML file into BW delta queue.
Edited by: Santosh on Nov 30, 2008 2:22 PM

Loading data from .csv file into existing table

Hi,
I have taken a look at several threads which talk about loading data from .csv file into existing /new table. Also checked out Vikas's application regarding the same. I am trying to explain my requirement with an example.
I have a .csv file and I want the data to be loaded into an existing table. The timesheet table columns are -
timesheet_entry_id,time_worked,timesheet_date,project_key .
The csv columns are :
project,utilization,project_key,timesheet_category,employee,timesheet_date , hours_worked etc.
What I needed to know is that before the csv data is loaded into the timesheet table is there any way of validating the project key ( which is the primary key of the projects table) with the projects table . I need to perform similar validations with other columns like customer_id from customers table. Basically the loading should be done after validating if the data exists in the parent table. Has anyone done this kind of loading through the APEX utility-data load.Or is there another method of accomplishing the same.
Does Vikas's application do what the utility does ( i am assuming that the code being from 2005 the utility was not incorporated in APEX at that time). Any helpful advise is greatly appreciated.
Thanks,
Anjali

Hi Anjali,
Take a look at these threads which might outline different ways to do it -
File Browse, File Upload
Loading CSV file using external table
Loading a CSV file into a table
you can create hidden items in the page to validate previous records before insert data.
Hope this helps,
M Tajuddin
http://tajuddin.whitepagesbd.com

How to I convert data from oracle database into excel sheet

how to I convert data from oracle database into excel sheet.
I need to import columns and there datas from oracle database to microsoft excel sheet.
Please let me know the different ways for doing this.
Thanks.

asktom.oracle.com has an excellent article on writing a PL/SQL procedure that dumps data to an Excel spreadsheet-- search for 'Excel' and it'll come up.
You can also use your favorite connection protocol (ODBC, OLE DB, etc) to connect from Excel to Oracle and pull the data out that way.
Justin

How to regularly load data from .csv file to database (using apex)

Hi,
i am using apex3 , I need to load data from a csv file to apex . I need to perform this automatically through code at regular time interval of 5-10 seconds.
Is it possible .If yes how ?. Please reply as early as possible. This will decide whether to use apex or not for this application.
this is question for Application Express. Dont know why in forum for BPEL
Edited by: TEJU on Oct 24, 2008 2:57 PM

Hello,
You really need to load the data every 5-10 seconds? Presumably it's read only?
I would look at using an Oracle external table instead, that way you just drop your CSV in a location the DB can read it and then you build a table that essentially references the underlying CSV (that way when you query the table you view the data in the CSV file).
Take a look at this link for a quick example on usage -
http://www.oracle-base.com/articles/9i/SQLNewFeatures9i.php#ExternalTables
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Loading data from flat file into 0EMPLOYEE

Dear,
I want to see the 'monthly change of numbers of employees' of my company in a BW report.
i want to do this by loading data from a dummy flat file into 0EMPLOYEE and afterwards into cube 0PAPA_C02.
i've searched the whole 'help and service sap' websites but nowhere, i could find a usefull user guide.
Could you explain me how this job needs to be done, are there certain steps that need to be taken?
here are a few of my questions:
1: what fields and data do i have to fill in my flat file?
2: how does the time-dependency of master data of employee work?
3: why do you only have to map 0calday and 0employee from infosource 0HR_PA_PA_1 to the corresponding fields of cube 0PAPA_C02?
4: how is the key figure 0HDCNT_VC filled automathically?
(the activation of cube 0PAPA_C02 and its flow is already done.)
or maybe you know a user guide which explains the whole picture and could you send me its link?
thanks a lot in advance,
Julie de Meyer

Hi,
Employee is master data : You need to extarct data every month.Once the extraction is done , you need rto activate to see the results. Otherwise it will display old result.
You can extract data for 0HR_PA_0 and 0HR_PA_1 cubes also. After that you can do the reporting based on this.
You can try some sap standard BI reports .
Headcount is calculated based on employement percentage which is maintained in infotype 0007 (Planned Working Time). If it is 100 then it is considerd as headcount 1.
you can check .
http://help.sap.com/saphelp_nw2004s/helpdata/en/63/351e3c6a2fc036e10000000a114084/frameset.htm
Regards
Nilesh

Load data from an infocube into other infocube

Hi guys....i try to load data from an infocube to other infocube.....i generated the infosource for export without problems i can visulize the datasource in my BW System assigned well...but how i can run the extraction from one infocube into the other?
I view that in ODSs there's an option to run load of data into datatargets but in the infocube i can´t find this option......
is there anything else to do?
Regards

The Infosurce and Datasource was linked automatically i can see this in Source System Myself but i can´t see it in Infosources Tab and i can´t create a Infopackage....that´s my problem

Loading data from .csv file into Oracle Table

Hi,
I have a requirement where I need to populate data from .csv file into oracle table.
Is there any mechanism so that i can follow the same?
Any help will be fruitful.
Thanks and regards

You can use Sql Loader or External tables for your requirement
Missed Karthick's post ...alredy there :)
Edited by: Rajneesh Kumar on Dec 4, 2008 10:54 AM

How to bind the data from user table into user report

Hi All,
Please assist me to bind the data from user table into user report. I did create an user table with data and create a user report template (using Query Print Layout). How can I display my data into report format which I created before? Any sample program or document I can refer?
Platform: SAPB1 2005A
Add On Language: VB.Net 2003
Thanks.
rgds
ERIC

Hi Ibai,
Thanks for your feed back. I give you an example.
Let say now i wanna print employee list, so i will go
1. Main Menu -> Reports -> HR -> Employee List
2. Choose the Selection Criteria -> OK
3. Matrix will display (Employee List)
4. I can print the report click on print button
5. Printing report
My target
1. Main Menu -> Eric_SubMenu -> Employee List
2. Matrix will display (Employee List)
3. Print button
4. Print report
My problem
Now I would like to use my own report format. My own report format means I wanna add on my logo or do some customization within the employee report. So how I am going to do? I only able to display the employee list in matrix. How do I create a new report format and display it.
Thanks.
rgds
ERIC

Error while loading data from R/3 into DSO

Hi,
While loading data from 2lis_02_s012 into a DSO the following error occured:
=============================================
Diagnosis
    Updating for the information structure is still activated in client 150
    (and possibly also in other clients).
System Response
    o   It is not possible to upload data in the initial mode.
    o   Generation of the delta update was terminated.
Procedure
    1. Switch off updating in all system clients.
    2. Repeat the relevant activity.
=============================================
Anyone plz help me in solving the issue.
Thanks & Regards,
VN.

Hi VN,
1. Incase you do full update , system will allow you to load without any error.
2. In case you want to do init then
      Lock users
      Stop the update in the system .
      Load init Package
      Start the update
      Unlock users.
      Load delta package.
Hope it helps.
Regards
Mr Kapadia

Loading Data from one Cube into another Cube

Hi Guys,
I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
Thanks in advance

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

How to load data from XML DOM into tables using Business Components


Hi,


I need to upload XML file (it's not a problem) an load data (DOM tree) from this file into relationan tables. This filelooks like this:


<Departments>
 <Department>
 <DepartmentName>OPERATIONS</DepartmentName>
 <Localization>BOSTON</Localization>
 <Employees>
 <Employee>
 <LastName>TURNER</LastName>
 <Job>SALESMAN</Job>
 <Manager>7698</Manager>
 <HireDate>1981-09-08</HireDate>
 <Salary>1500</Salary>
 <Commerce>0</Commerce>
 </Employee>
 </Employees>
 </Department>
</Departments>


Is there any Business Components support to obtain this ? What about primary and foreign keys values (there is no in XML file). How to place this XML data in appropriate tables ?


Kuba


Pl post details of exact OS and database versions, along with a sample of the XML file and description of the tables. What have you tried so far ?
http://docs.oracle.com/cd/E11882_01/server.112/e22490/ldr_control_file.htm#i1005614
HTH
Srini

How can i load data from access database to datagridview with custom columns all days of a month ?

Hi guys
I am newbie in vb net and I want your help to solve a problem.
I have this datagridview with two columns and all days of a month in custom columns.
[IMG]http://i59.tinypic.com/2qwpj15.png[/IMG]
I also have one combobox to change Year and a combobox to change Month.
Here is the code to load data
Private Sub fill_plan()
dgMonth.Rows.Clear()
Try
Dim i As Integer = 0
Dim query As String = "SELECT MonID,Unitname,Personel,Udate FROM tblMonth ORDER BY Unitname"
con.Open()
cmd = New OleDbCommand(query, con)
myDR = cmd.ExecuteReader
If myDR.HasRows Then
While myDR.Read
dgMonth.Rows.Add()
dgMonth.Rows(i).Cells(0).Value = myDR.GetInt32(myDR.GetOrdinal("MonID"))
dgMonth.Rows(i).Cells(1).Value = myDR.GetString(myDR.GetOrdinal("Unitname"))
dgMonth.Rows(i).Cells(2).Value = myDR.GetInt32(myDR.GetOrdinal("Personel"))
i = i + 1
End While
End If
myDR.Close() : con.Close()
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
End Sub
With
this code the
personel column
loads the first
day of the month.
I want to load
the column the date that is
in the database.

Hello,
This can be done with less code
Private Sub fill_plan()
dgMonth.DataSource = Nothing
Dim dt As New DataTable
Try
Dim query As String = "SELECT MonID,Unitname,Personel,Udate FROM tblMonth ORDER BY Unitname"
con.Open()
cmd = New OleDbCommand(query, con)
dt.Load(cmd.ExecuteReader)
dgMonth.DataSource = dt
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
End Sub
The above loads all rows, if you want to limit the rows placed in the DataGridView this is best done in the SQL via WHERE conditions and/or with SELECT TOP x.
Formatting of the data is best done via the property window for the DataGridView on whatever column you want too. Using the above you now need to set the data property for each column and set dgMonth.AutoGenerateColumns = False, in the end we end up with
less code
edit is there a reason for returning the primary key? If so then using my method we can hide that field but I see no reason for having it in this case
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

How to dynamically load data from DB in an HTML control present in jsp

Hi Friends,
Can anyone help me with this problem:
I am working on a portal application. My requirement is to dynamically load data in an HTML control present in my JSPs. The controls are combo-boxes, text-fields, list-boxes etc. . Also, the events to load the data are like On Form load, On selecting a value from the combo-box, on clicking on a text-field etc.
If any one can help me with a code snippet, than that would be highly appreciable. If not then the approach to achieve this will also be helpful.
Thanks and Regards,
Gaive.

Refer
http://www.developer.com/db/article.php/3384201
http://www.developer.com/db/article.php/10920_3399331_1

Loading Data from multiple tables into essbase using ODI

Hi,
We have a scenario where data comes from multiple tables. I would like to know how will ODI load this data for the right combination of the members

Hi,
I take it each data table has a field which maps to the other table. You can just drag the datastores on to the source interface and create a join between the tables.
Cheers
John
http://john-goodwin.blogspot.com/

How do I load data from R/3 into /BI0/TCUST_SALES

Similar Messages

Maybe you are looking for