How do I lower or compress audio for ALL clips?

I'm early in this so bear with me...How do I lower the volume for all the clips at once or at least compress it and set a limit of how loud the volume can get to? Thanks much!

To adjust the gain for a group of clips, select (highlight) all the clips to be adjusted then go to Modify->Levels. The adjustment window will open where you can make either an "absolute" or "relative" adjustment (+ or -)
To add a Compressor/Limiter or Dynamic Processor filter, drag it to one clip then load that clip into the Viewer to make adjustments to the filter. Once you have the settings where you want them, copy that clip in the Timeline (Command c). Now select (highlight) all remaining clips to which you want the filter applied. Right-click on one and select Paste Attributes. When the attributes window opens, click the Filters button on the audio side.
-DH

Similar Messages

Normalise audio for all clips in the timeline ?

Is it possible ? At the moment, I am doing it clip by clip. I want to do it for all and then probably modify separate clips of high noise down or dialogues a bit up.
Selecting all the clips and then going to audio properties disables the Normalise Audio option.

Thanks,
I selected the first image and everything to the left them deleted (event though I could not see anything in the timeline). I then had to replace the first image and could move the timeline to where it needed to be.
Could not see anything in the way but there must have been something somewhere.
Thanks

How do I lower the write speed for burning a DVD? It gives me no option!

How do I lower the write speed for burning a DVD? It gives me no option!

Export the dvd as an image from Encore, then use Imgburn to make the discs. I usually export a dvd folder from Encore and then use Imgburn to create the iso and do the burning
The Official ImgBurn Website
Be careful if you download it, it will try and install allsorts of other programs. This thread might be of some help.
Imgburn and Bloatware Add-ons

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

How to show a single error message for all fields

Hi
I have a JSF from containing around 10 controls(input, select etc.) .
Now I need to display an error message in case any of the mandatory control has validation error.
Message format would be like
"*Please,Complete the fields marked with yellow!"* The message I need to show in a div tag with Yelow background.
Currently, I am getting individual default error message in case validation fails and related field is bordered with Yellow.
My code is below.
*<h:panelGrid columns="3">*
*<h:outputText value="#{msgProv.bi_firstname}" />*
*<h:outputText>*
*<rich:spacer width="100px"></rich:spacer>*
*</h:outputText>*
*<h:panelGroup>*
*<h:inputText*
*value="#{brokerInformationFields.firstName}"*
*label="#{msgProv.bi_firstname}" id="firstName" required="true">*
*<f:validateLength maximum="10" minimum="2" />*
*<rich:ajaxValidator event="onblur" />*
*</h:inputText>*
*</h:panelGroup>*
*<h:outputText value="#{msgProv.bi_lastname}" />*
*<h:outputText>*
*<rich:spacer width="100px"></rich:spacer>*
*</h:outputText>*
*<h:panelGroup>*
*<h:inputText label="#{msgProv.bi_lastname}" id="lastName"*
*value="#{brokerInformationFields.lastName}" required="true">*
*<f:validateLength maximum="20" minimum="1"/>*
*<rich:ajaxValidator event="onblur" />*
*</h:inputText>*
*</h:panelGroup>*
*<h:commandLink action="#{brokerInformationActions.submit}">*
*<h:graphicImage value="/images/axa/btn_submit_from.png" style="border:0px;"/>*
*</h:commandLink>*
I am using (JSF1.2,Rich Faces 3.3.0,Facelets.)
And a Phase Listener from
http://balusc.blogspot.com/2007/12/set-focus-in-jsf.html
This Phase listener is to border the control with Yellow in case validation fail.
Now my Query
*1) How can I show a single message for all fields as I marked above in case of validation failure?*
*2) Now, the control is becoming yellow borderd when user clicks the submit button and validation fails.*
*User can move from one control to other using tab. That time proper validation message is appearing.*
*but the border of the control is not changing to yellow.*
*What's the correcion can be made to meet that requirement too.*
regards
Roy

Hi Nabheet,
Thanks for your response.
The FM returns the error messages if they are standard ones. For example, if the posting period is closed - the FM will not allow the Workflow to proceed further.
But in this case, I have a custom error - for a particular Profit center, Cost center and I/O fields are mandatory(not at time of parking, but should be filled before posting).
Since this is not a standard error, this FM will not stop workflow from proceeding further. How can I have the custom error captured in this FM?
Thanks.

How to allow pop-ups in Safari for all users

How do you allow Safari pop-ups for all users? After rolling out 50 Mac OSX with Safari comes default with Safari pop-ups disabled, now I must allow pop-ups for all users logging in.
Good day!

Do you have an Exchange (e.g. a work) email account set up on the iPad ? If you do then it's possible that the account profile is preventing you turning popups 'on', in which case you would need to contact the email account administrator

How to diable delete button in PO for all users excepting one

Dear All
Please guide how to disable delete button in PO for all users excepting only one.
Thanks

Hi,
check following link
[Disable fields at item level in ME22N;
[Disable Delete Button;
Regards
Kailas Ugale

How do you change/adjust border width for all the cells in a table created in Pages?

How do you change/adjust border width for all the cells in a table created in Pages?
Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
Btw- I'm assuming it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me know if this is not actually possible in Pages

They know perfectly well what they took out of Pages '09.
Well over 90 features.
Do you think you posting feedback is going to remind them of what they did?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?

Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

How to remove cover page from hp3530 for all?

how to remove cover page from hp3530 for all?

Hi there Vari,
Can you give us a little more information to help out? Is this a 3530 Deskjet printer or the 3530c scanner? Is this cover page for a fax?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

i don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

''how do i save my zoom setting for all sites? not for each site I visit''
That would be be impossible unless you did away entirely with page formatting entirely. Each author may have their own idea of what you should be seeing and how you are to see it. By site which is the default is about the best that you can do.
If you have a serious problem you could change the resolution of your display, but it had better be a very large monitor.
'''NoSquint''', adjust the text-only and full-page (both text and images) zoom levels as well as color settings both globally (for all sites) and per site. Toolbar buttons, percent displays on status bar.
* https://addons.mozilla.org/firefox/addon/2592
'''Zoom text of web pages'''
* http://kb.mozillazine.org/Zoom_text_of_web_pages
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

How can I change the duration for all clips in iMovie 10.2

How can I change the duration for all clips in iMovie 10.2? I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

How to change the UWL refresh rate for all portal users.

Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.

1.      Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
      From the Universal Worklist Systems, choose the system for which you want to edit the properties.
    Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju

How can I install and activate extensions for all users

Hi, within the version 7.0.1 I am able to install noscript extension for example for all users.
With version 8.0 the extensions are disabled by default, so I do not install it on company computers.
How can I manage extensions and settings for all users in 9.0?
Best regards
Jens

Hi John,
I appreciate your prompt response.
We have an Australian client here in the Philippines and would want to purchase an adobe software under Creative Cloud Licensing.
Since this type of licensing is not yet available here in the Philippines, they are suggesting that they can purchase it in their country.
My main concern is, will there be any conflict upon installing/activating an adobe software under Creative Cloud which will be purchased from their country?
And what are the steps for installing and activating a software under this type of license.

How do I lower or compress audio for ALL clips?

Similar Messages

Maybe you are looking for