How do i make a lottery checker using numbers 09?

Hey guys, i need a little help... i really need to make a lottery checker, i'm tired of checking ticket by ticket, but i don't know how to make it using numbers 09... Anyone know how to do it? please help me, thanks

H3=SUM(I3:N3)
H3=IF(G3=6, "YOU WIN", "NO MATCH")
I3=IFERROR(MATCH(A3,Table 2 :: $A$2:$F$2, 0), 0)>0, 1, 0)
And did this after:
I3=IF(IFERROR(MATCH(A3, Lottery Drawing :: $A$2:$F$2, 0), 0)>0, 1, 0)
select I2 and fill to the right by grabbing the little circle at the bottom right of the selected cell, then drag to the right through N3.... grab mean click and hold)
now select cells G3 through N3, and fill down (again , by grabbing the little circle at the bottom right of the selection and draggin down as needed)

Similar Messages

  • Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

    Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • How can i make a signature by using lightroom? , is it possible?

    how can i make a signature by using lightroom? , is it possible?

    To can create a text identity plate in LR but to create a graphical version
    requires Photoshop

  • How i can make web application by using oracle form6i

    how i can make web application by using oracle form 6i , indetail .
    A.R

    indetail .As Andy Millman might observe, you're having a laugh. This is a big topic, far exceeding what it is reasonable to expect people to help out with in a Forum. Do you not have the 6i documentation?
    OTN has a site for upgarding to web forms. Although it is mainly focussed on moving to 9i/10g a lot of the issues and solutions apply to moving a 6i client/server app to web deployment. For further help there is a Forms.
    Cheers, APC

  • How do I make a media placeholder in numbers for iPad/iCloud

    How do I make a media placeholder in numbers for the iPad/iCloud
    also can I format the placeholder reduce the pixels of the imported
    image.

    I've only seen this particular function in the Mac / desktop version of iWork.  As far as I know, images / media are not resized by placeholders, only masked. Once placed, the images can be double-clicked / double-tapped and then scaled to the appropriate size within the mask.

  • HT4642 how do i make columns wider on ipad numbers app

    how do you make the columns wider in numbers for the ipad

    I found the answer here.  http://www.dummies.com/how-to/content/how-to-adjust-columns-and-rows-in-the-numb ers-app-.html

  • How can i make a slideshow to use in muse where each slide has its own hyperlink

    I want to make a slideshow to use in muse where each slide has its own hyperlink to another page in the site.
    example here: Genesis Bicycles - Easton PA
    I see how slideshows can be made in muse, but haven't seen where you can assign a hyperlink to each image. 
    I would like it to be html5 compatible.
    Thanks ,
    mark

    Hey Mac, thanks for the feedback. I did some research on composition widget, still not finding how I can use that to make a slide show like the one on www.Genesisbicycles.com home page , could you elaborate on how to or maybe link a tutorial for me.  It would be a big help.
    mark

  • How do I make a data disk using Disk Utility (Panther 10.3.9)

    I am trying to back up some of my data to disks, so I can upgrade my OS to Leopard. I have done this in the past but either forgot how or it isn't working right (some things are not working right on my computer at present..?? my Final Cut Pro won't open, that's why I decided to upgrade) Could you please tell me how it is supposed to work. I think I have made a disk image okay but when I highlight it in disk utility and hit burn it says invalid argument?? If I install Leopard will I loose all my files?

    Not necessarily, but you should never do a major upgrade without having a bootable backup of your system. In fact you should never be without backups:
    Basic Backup
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    8. Intego Personal Backup (Commercial)
    9. Data Backup (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
    Although you can buy a complete FireWire drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets (911, 921, 922, for example.) You can find enclosures at places such as;
    Cool Drives
    OWC
    WiebeTech
    Firewire Direct
    California Drives
    NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
    Upgrading does not have to be difficult unless you choose to make it so. You have three installation options. I would recommend an Archive and Install option when feasible:
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • How can I make SP2010 site responsive using IE8?

    Hi everyone,
    My company use a range of laptops and screen resolutions and I need my SP site to fit to whichever screen it is being viewed on.  I have followed lots of threads saying to use media tags and CSS3 but I have IE8 which isn't compatible.  Upgrading
    to IE9 isn't an option.
    Has anyone got any solutions?  Is the answer a fixed width centre and the outer white space altering? (and if so how can I make that happen?!)
    Many thanks
    Natalie

    Hi Pinky,
    Thanks for posting your query, Kindly refer below mentioned URLs for this issue.
    http://www.graphicalwonder.com/?p=903
    http://kyleschaeffer.com/mobile/v5-responsive-html5-master-page/
    I hope this is helpful to you. If this works, Please mark it as Answered. 
    Regards, 
    Dharmendra Singh (MCPD-EA | MCTS) 
    Blog :
    http://sharepoint-community.net/profile/DharmendraSingh

  • How do I make Visual Studio 2013 use my dedicated graphics card instead of integrated graphics on my laptop?

    I am using Alienware 13 as a portable workstation. I do game development on Unreal Engine 4 using Visual Studio 2013. The issue I am having is that when I want to debug codes in Visual Studio 2013, it launches Unreal Engine 4 through the debugger and uses
    the integrated graphics card rather than my dedicated graphics card, which is an nVida Geforce 860M.
    When I wanted to change the settings in the NVidia Control Panel, I see this:
    The drop-down menu is grayed out, so I cannot select to change the graphics card to my dedicated card.
    What should I do? How do I make it so that Visual Studio uses my dedicated card? Thanks in advance.

    Hi tom_mai78101,
    Thank you for posting in the MSDN forum.
    It seems that it is not the correct forum for this issue, since this forum is to discuss Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
    As you said that you want to change the setting so that Visual Studio uses your dedicated card in NVidia Control Panel, since this NVidia Control Panel is third-party tool, we are not support it. So please post this issue this issue directly
    to this NVidia Control Panel Official website:
    http://www.nvidia.com/object/nvidia-communities.html , you will get better support.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can/how do i make an iTunes library using data (songs, apps, e.t.c.) to my computer.

    Not all my music is on my old computer, and no apps are. This is as I exported the library to my D: drive, added more stuff, while syncing to it, then re-imported it. My iPod is on iOS 4 and want to upgrade to 5, but if I do, then I will lose all my apps, and most of my music. I recently got a new computer with a new iTunes library (empty). Is there any way I can 'make' a new library using my iPod touch data, so I can get iOS 5?

    - Transfer iTunes purchases to the new computer:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer other music using a third-party program like one of those discussed here:
    Copy music
    - Connect the iPod to the new computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up.
    - Restore the iOd from that backup. This will also update the iPod's iOS.

  • How to create a list from checkboxes using Numbers on iPad?

    I am creating a guest list using Numbers foriPad. First sheet is a list of invited people with checkboxes (Yes/No/still to reply) in next column. In the next sheet i want create a list of everyone that has replied yes.
    I have tried using the if statement, but I dont want any blank cells.
    -IF(A2;TRUE;A1) gives name in A1 if box is checked, but gives 0 or something else if i specify. But i want to automatically start on next row to avoid blank or 0-
    Example:
    David   V
    Lisa.     V
    Derek 
    Brad.   V
    Paul.
    John
    The separate list in another sheet should then be:
    David
    Lisa
    Brad
    Any help will be appreciated.

    Can you use the the reorganize panel to sort the list?
    Idon't have Numbers on the iOS so I am not sure.  You are posting in the forum for Numbers on Mac OS X.
    you can also add a new column (let's say C)
    where
    C1=if(A1, A1, "")
    this will include the name from column A  when the checkbox in B is checked.  You can then copy column C and paste values using the menu item (Edit > Paste Values, or equivalent in iOS... not sure what it is)

  • How can I make Siri choose among phone numbers to send texts to

    How can I make Siri choose the correct phone number to text when I ask it to send a text message to a contact who has a phone number and an email address?

    Johnathan,
    Can Siri record a voice memo?
    Do you know if it can read older text messages by just asking?
    Thanks
    S

  • HOW CAN I MAKE THE GRIDLINES IN A NUMBERS SPREADSHEET PRINT

    I have created a numbers spreadsheet, but when I print it, there are no gridlines.  Because the spreadsheet is a page and a half wide it is hard to follow across to get to the right data.  How can I make the gridline print?

    Question asked and answered several times.
    Enter the Inspector of Tables and define the borders to fit your needs.
    Yvan KOENIG (VALLAURIS, France) jeudi 7 juillet 2011 20:34:59
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own
    before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How do I make Firefox ignore the "Use High Contrast" option in Windows?

    I am taking care of a Windows XP machine which is running in "High Contrast Mode" for accessibility reasons. This display mode is enabled via the Control Panel of Windows (Accessibility Options, Display, Use High Contrast) and it has major impact on how Firefox display web pages. What I want to do is make Firefox ''ignore'' this operating system option, so web pages will be rendered "normally", but keep Windows in High Contrast Mode.
    Is there any way I can make Firefox ignore this setting? I.e. run Windows in High Contrast Mode, but not Firefox?
    A similar questions has been discussed here:
    http://support.mozilla.com/en-US/kb/Website%20colors%20are%20wrong
    However, I don't want to disable High Contrast for Windows and the whole machine, just for Firefox.
    Thanks in advance
    Bounder of Adventure

    John,
    thanks for your comments. The computer is mainly used by a visually impaired person. She doesn't do much web surfing though and doesn't really need a high contrast web browser. If however a colleague wants to help her maintain the machine or quickly wants to look up something on the web for her, then it would be great if it was possible to access web pages "unfiltered", in their regular look and feel, as designed by the web author. In fact, the High Contrast Mode significantly changes the way web pages look, and sometimes screen elements needed for navigation etc. are suppressed or rendered invisible. (This, of course, is often related to poor web design, like graphical buttons or links with the actual label as a background image or without an ALT attribute, but unfortunately, vast parts of the web are not really "accessible", so accessibility will remain an issue for the browser as well.)
    Creating a separate user account certainly is an option, especially for shared machines, but it makes it more complicated to quickly jump in and give her a hand. That's why separate user accounts are not really popular here; instead, Opera was installed which does not adhere to the OS setting and therefore grants a neutral view to all web pages.
    Actually, when I started investigating on that issue, I was quite surprised that there was no option for this in Firefox, not even in "about:config". After all, Firefox obviously queries the OS for the Contrast setting and then chooses to render the page this or that way, so I thought they certainly implemented a flag or something to change the behavior. It seems however there is no such flag, is there? This distinction seems to be entirely hard-wired.
    I am not sure if this is the place for change requests, but if somebody stumbles upon this question, is there any chance to make this setting open to the public? Something like an option "accessibility.useoscontrastsetting" or so? This might also facilitate it to develop an add-on for on-demand switching between the two modes, and web designers could check more easily how their work looks for those with poor eyesight.
    Greetings,
    Bounder of Adventure

Maybe you are looking for