How do I make a Pre-Roll ad

I am trying to create web ad commercials. I am putting this
commercial before a video. The two videos are connected together in
one video. The trick is, I need to make it so the first videos seek
bar is disabled so the viewer can't skip past the commercial. Any
help on this subject would be greatly appreciated! Thank you!
Here's the actionscript code I am using so far, if this
helps:
import fl.video.VideoEvent;
function onPlayerComplete(event:VideoEvent) {
// remove listener so it doesn't happen again
myPlayer.removeEventListener(VideoEvent.COMPLETE,
onPlayerComplete);
// set source to new video
myPlayer.source = "
http://www.codyenterprise.com/multimedia/clansmovie.flv";
myPlayer.addEventListener(VideoEvent.COMPLETE,
onPlayerComplete);

pick a skin that doesn't have a seek bar or create your own
skin that doesn't have a seekbar.

Similar Messages

How can I make a pre made vector outline thiner?

I downloaded a free vector shape, but the outline is to thick, how can i make it thinner so it matche's up with my other vector shape's?

Wade_Zimmerman wrote:
what on earth are you talking about -0p2 equals 2 pts because there is no such thing as -0 picas so what you are left with is 2.
You’re usually right about a lot of things, especially Illustrator, but you’re wrong about this one, Wade.
Why does -0p3 work in InDesign? Why does -1p0 or -1p6 (ie -18 pt) work in Illustrator? When I use the cursor keys to increment values I can press up to increase the increment by 0p3, but I cannot go below 0p. Press down and the value goes to 0p3.0
to write -0p2 is a bit crazy when you should be writing -2pt. The whole thing you want fixed is a bit strange i can't imagine why you would even need this.
Look at this screen shot of the control panel from Illustrator 15:
If I enter -3pt when the default units are picas, the dialogue changes it to this:
“-0p3’ means -3 points, using the long established convention that PageMaker, InDesign, Photoshop, QuarkXPress, FreeHand, and (except for this bug) Illustrator have supported for years.
Bug.

How do you get rid of 'empty' pre-roll time in logic pro 9?

how do you get rid of the pre-roll time in logic pro 9?
My project's start time is 8-bars before any material, or tempos, or anything...
Can't move the start time back to ")" (zero)    STUCK!! at -8
The song now has 20 seconds of dead air time in a pre-roll.
None of these worked or revealed anything...
-tried making a new copy of song
-looked into every track's file information looking for a spurious entry
-tried deleting the time/space

Hi
Check for any Track Automation nodes in the "preroll'.
CCT
Edit
You should note that generally negative (or zero) project start numbers should be avoided at all cost: there are many peculiar behaviour problems associated with them.

HT204022 how do i make sure my pictures are saved to camer roll or aperture

how do i make sure my pictures are saved to camer roll or aperture

Is there anyway of checking they are in itunes before I restore?
I've never used the contacts part of sync process as I wasn't sure if it would store the contacts I have on my phone on my computer or vice versa (which would be crap as I don't really use outlook etc for contact storage)
Any suggestions?

My camera roll in my 5c has over 2000 pics my photo stream only has 900, how can i make the photo stream have the same amount of pics so i can delete some from my roll to free up space

my camera roll in my 5c has over 2000 pics my photo stream only has 900, how can i make the photo stream have the same amount of pics so i can delete some from my roll to free up space

Photostream is not a substitute for importing your photos to your computer.
How long are My Photo Stream photos stored in iCloud?
The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them."
ow many photos are stored in My Photo Stream on my devices and computers?
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album.

Can't batch capture, no pre-roll

I am trying to re-capture some footage. The problem is, I needed the beginning of the tape, so I originally captured from the start of the tape. Now, I can't batch capture because there is "not enough pre-roll" (not a direct quote, but that is the error it is giving me).
How can I fix this? Is there a way to change how long the pre-roll will take? Or is there a way to edit the in point on the clip?
Thanks, like always!
Matthew

Well.... NEXT TIME you'll know to always have adequate pre-roll on your footage.
THIS TIME, first, change the inpoint on the batch capture that contains the offending portion to a place where you can reliable capture the clip you need. Then do a capture now of the head of the tape up until the new in point of that clip. Be sure to give yourself adequate overlap so you don't lose any frames.
Does that make sense?

How do I make iPhone passive in iPhoto - not once but always

I use Aperture and iPhoto. I import all my photostreams and photos to Aperture. It is my main photo application.
But I also use iPhoto for special fotos and events.
I never syncronize my iPhone with iPhoto or iTunes, but I often connect it to my MacBook just to charge the phone.
Every time I work in iPhoto and connect my iPhone, iPhoto will open my photo roll and make my photo roll ready for import.
Then I can right-click on the iPhone in the iPhoto device list and make the phone "passive". But I have to do that EVERY TIME I connect the phone.
How do I make the iPhone passive??
I don't want the phone to be "married" to iPhoto. It should be "married" to Aperture ONLY.
Frank

You can't. If iPhoto is open when you connect the phone then it will offer itself from importing.
Regards
TD

How do I make sure that my second-hand iPod is not a stolen product?

My husband recently recieved an iPod shuffle from a friend of his. His friend told him he could have it since the friend didn't have a computer to download songs from or charge the iPod with. He states that he thought the iPod already had songs pre-recorded on it, and even if he used someone else's computer to get the songs, it's too much trouble. My husband had lent him some money to pay a utility bill and he was using this iPod that he just happened to have laying around to pay my husband back. I don't trust my husband's friend. How can I make sure that he isn't trying to push a stolen iPod off onto my husband? We haven't used it yet. My husband doesn't have much use for the shuffle, but I would love it, if only I could find out whether it was stolen or not. I don't want to take it to the police and start a big fight or get his friend in trouble, but if it is stolen I want to know so I can send it back to Apple or who ever owns it.

Hi pyrausagi,
You sound like a very honest and sensible person, who is taking very reasonable precautions against becoming a second victim of theft. Others on these forums have been less cautious and have lost their recent purchases.
My suggestion would be to make sure the person offering the iPod shuffle is easily identifyable. Make sure he/she has a real address and you know what it is. Get a picture of the person and make sure they know you have it. If they are not above board I'm fairly sure they won't allow this.
There are a number of online databases of stolen merchandise. Look them up and check the serial number of the iPod against these databases.
Apple will not tell you if the item is stolen. Their phone agents that work with the public do not have that kind of information.
Note that doing all this will not guarantee you don't get a stolen iPod. Only purchasing one new (or refurbished) from Apple or an authorized reseller can do that. It does, however, give you a better chance.
Best of luck. Enjoy whatever iPod you get.

I updated to iOS7 and my deleted photos came back. How do I make sure this doesn't happen again?

I updated to iOS7 and my deleted photos came back. How do I make sure this doesn't happen again? I want to get rid of the ones I already got rid of, but if they just keep coming back that will be a waste of time.
Can anyone help?
When I sync with itunes, the photos sections says I am syncing with my iphone, so I assume that anything I physically delete from my iphone should not be showing up again. Right?
Thanks in advance.
CM
PS- I don't use iphoto.

Is that really how sync works?
If you read this, http://support.apple.com/kb/ht4236 and this http://support.apple.com/kb/TS1314 they don't actually make how sync works very clear. I had thought that syncing my device to itunes would allow I tunes to copy what was currently on my phone so that I could restore that information when needed ie if your phone dies and you need to do a clean install of the iOS system, you always have what is currently on your phone saved in Itunes.
Specifically reading this:
To delete Camera Roll photos and videos from your device
There are two methods to delete items from the Camera Roll:
Import the Camera Roll to your computer and choose to delete items after import.
Delete photos and videos from your device manually:
Open the Photos application and open the Camera Roll.
Tap the Action button.
Tap each photo to select it.
Tap the Delete button.
Note: For photos and videos you want to save, import them to your computer before deleting them from the Camera Roll.
What you seem to be saying is that iTunes saves every contact, message, photo etc and when you click sync, it reuploads things that you deleted? This seems like it should work the opposite. Make a mirror image of my iPhone on my computer, not make a mirror image of my computer onto my iPhone. You delete things for a reason.
Help- anyone else? Is razmee209 right?

How can I make a .gif file work in Keynote on my iPad Mini?

How can I make a .gif file work in Keynote on my iPad Mini?
Have saved a .gif file to my Camera Roll, and it works fine as I have checked it through mail. When I import it into Keynote however it won't animate. Even when I play slide. Any suggestions?

The can use apps such as Apple's Pages app for Word documents and Numbers for Excel spreadsheets, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

How to set a default pre-select for radio buttons?

Hi
I have some text form fields that I've set up to display some paired variables stored in a .txt file. When the swf loads, the form fields are populated with the text.
I've also set it up so that if you change the text and hit a submit button, the .txt file gets updated.
I'm now tryng to set it up so that I can store radio button selections in the .txt file too.
I've started doing it a certain way, but am wondering if there is a more straightforward way of doing ?
Here's what I've done...
I've set up the butttons to spit out "on" or "off" depending on the selection, and apply that to the variable that gets stored.
Now, in the same way I loaded the variables into the text form fields when the swf is refreshed, I want to load the on/off variable, and then somehow apply it to the radio buttons so that one of them is pre-selected.
So my questions are a) how do I take that loaded variable, and use an if statement to make it pre-select the button, and b) is there a simpler way to pre-select a button based on an external variable?
Thanks
Shaun

Nevermind guys - I did it using the 'rb_on.selected' command on the "on" radio button if the .txt file variable was "on", else the "off" radio button is selected.
Thanks for taking a look though!
Shaun

How can i make shorten systemlog files and joblog files on OS

Hello
How can i make shorten systemlog files and joblog files on OS

Hello Jan,
You can limit the size of system log.
The size of the application server's System Log is determined by the
following SAP profile parameters. Once the current System Log reaches
the maximum file size, it gets moved to the old_file and and a new
System Log file gets created. The number of past days messages in the
System Log depends on the amount/activity of System Log messages and the
max file size. Once messages get rolled off the current and old files,
they are no longer retrievable.
rslg/local/file /usr/sap/<SID>/D*/log/SLOG<SYSNO>
rslg/local/old_file /usr/sap/<SID>/D*/log/SLOGO<SYSNO>
rslg/max_diskspace/local 1000000
rslg/central/file /usr/sap/<SID>/SYS/global/SLOGJ
rslg/central/old_file /usr/sap/<SID>/SYS/global/SLOGJO
rslg/max_diskspace/central
Refer to http://help.sap.com/saphelp_nw70/helpdata/EN/c7/69bcbaf36611d3a6510000e835363f/content.htm
for explanation of profile parameters.you can reduce the size of system log using rslg/max_diskspace_local and rslg/max_diskspace_central
But you can't reduce the size of job log files on OS
Rohit

How do you make an array of image icons and then call them?

How do you make an array of image icons and then call them, i have searched all over the internet for making an array of icons, but i have
found nothing. Below is my attempt at making an array of icons, but i cant seem to make it work. Basically, i want the image to match the value of the roll of the dice (rollVal)
Any help would be greatly appreciated, some code or link to tuturial, ect.
/** DiceRoller.java
* Roll, print, Gui
import javax.swing.*;
public class DiceRoller extends JFrame
     private ImageIcon[] image ;
     public String[] images = { "empty", "dice1.jpg",
               "dice2.jpg", "dice3.jpg", "dice4.jpg",
               "dice5.jpg", "dice6.jpg" };
     public Dice die;
     private int rollVal;
     public int rollNum;
     private JLabel j1;
     public DiceRoller(){
          j1= new JLabel("");
       die =new Dice();
       int rollVal;
       rollVal = die.roll();
       image = new ImageIcon[images.length];
     for(int i = 0; i < images.length; i++){
      image[i] = new ImageIcon(images);
     if (image!=null){
          j1.setIcon(image[rollVal]);
     System.out.println("Roll = "+die.roll());

Demo:
import java.awt.*;
import java.net.*;
import javax.swing.*;
public class IconExample {
    public static void main(String[] args) {
        EventQueue.invokeLater(new Runnable(){
            public void run() {
                launch();
    static void launch() {
        try {
            Icon[] icons = new Icon[6];
            for(int i=0; i<icons.length; ++i) {
                String url = "http://www.eureka-puzzle.be/cast/images/dice" + (i + 1) + ".jpg";
                icons[i] = new ImageIcon(new URL(url));
            display(icons);
        } catch (MalformedURLException e) {
            throw new RuntimeException(e);
    static void display(Icon[] icons) {
        JPanel cp = new JPanel();
        for(Icon icon : icons) {
            cp.add(new JLabel(icon));
        JFrame f = new JFrame();
        f.setContentPane(cp);
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.pack();
        f.setLocationRelativeTo(null);
        f.setVisible(true);
}

How do I make a boot CD for Lion?

I just bought my kids MacBook Pros with Lion pre-installed. It came with no resotre disk- what if they crash? How do I make a bootable 'recovery disk' without having to buy another copy of Lion from the App store?
I found this link on Google-
http://www.ehow.com/video_4978308_create-mac-startup-disk.html
but soemthing doesn't make sense about this method- wouldn't the diosk image you were trying to burn end being way bigger than a DVD?

Macs with pre-installed OS X Lion don't come with physical media. You have a recovery partition on your internal hard disk on your mac. If you want to reinstall OS X, hold down CMD + R when you hear the startup sound.
If you want to, you can buy an OS X Lion USB Thumb drive here: http://store.apple.com/us/product/MD256Z/A ($69.00)
You can also copy the recovery hd on an USB drive with this tool: http://support.apple.com/kb/DL1433

Adobe pro - print settings: How do i make a custom page size list, which i can copy to my other comp

Adobe pro - print settings: How do i make a custom page size list, which i can copy to my other computers who have adobe pro installed?

your right.. i ment acrobat pro :-)
my problem is that i use the PDF printer to export CAD drawings as PDF´s.
As it is now, there are some pre-defined page sizes in the print settings, and i know i can add custom pages manually one at a time.
What i want is to copy the list of my danish standard page sizes, and use them on my other versions of acrobat.
Its like 70 different sizes, and i have them made manually on my current computer, but i hope its possible to copy the list to other computers.
Maby its some script where i can define the sizes, and then copy to another computer. Im just not that much of a computer genius :-)
Hope i got through this without to many spelling mistakes...
Thanks for helping.

How do I make a Pre-Roll ad

Similar Messages

Maybe you are looking for