How do I make a user to update to the current flash player

I was able to gather info on how to test and display users OS and FP version. However this info is "dormant" it is just being displayed on the screen.
Does anyone know how to make an alert message to upgrade to the current Flash Player if a user runs the lower version?
If the version is as intended then no message should come up.

Check out SWFObject - it can detect the version and, if need be, prompt the user with an express installer that lets them upgrade the player without even leaving your page.
http://code.google.com/p/swfobject/

Similar Messages

After updating to the new flash player 11.3.300.257

Hi,
After i updated to the new flash player, i am facing problems with my flash media, such as youtube videos and flash games, youtube loads very slow and sometimes it loads sound without video. flash games doesn't load at all.
some other video sites, the video area shows all black or all white.
i have followed some solutions that i have found in this site .. but nothing helped ..
what to do ?

Flash has recently updated to version 11.3. Some users are reporting issues with this version of Flash and Firefox. The video may appear black, white or grey and never play. This article has a few solutions that have been reported to work. " http://support.mozilla.org/en-US/kb/flash-113-doesnt-load-video-firefox "
tried all this solutions but nothing worked

How can I watch presentations that are devedores by the Adobe Flash Player program in the IPad?

How can I watch presentations that are devedores by the Adobe Flash Player program in the IPad?

Search any of the iPad, iPhone or iPod touch forums for "flash". You'll find a number of threads on the issue with suggestions for alternative app/service combinations that allow viewing of some Flash content.
Regards.

How do I get a user to update to the Flash Player Version to 10.1

I would like to find out if there is a way for a message to pop up on my website if the user has Flash Player version lower than 10.1. If the version 10.1 or higher (in the future) no message should come up. The message should prompt a user to update to the Flash Player version 10.1.
My entire site is in Flash and I am using AS3. So I am guessing I should implement an AS3 code on the first frame of the script layer. Does anyone know what would be this code?

O.K. I see,
HTML code is automatically generated by Flash program.
I am unable to give you a short answer on this and thus attaching the code I
see in DreamWeaver:
0) {
versionRevision = versionRevision.substring(0,
versionRevision.indexOf("d"));
var flashVer = versionMajor + "." + versionMinor + "." + versionRevision;
// MSN/WebTV 2.6 supports Flash 4
else if (navigator.userAgent.toLowerCase().indexOf("webtv/2.6") != -1)
flashVer = 4;
// WebTV 2.5 supports Flash 3
else if (navigator.userAgent.toLowerCase().indexOf("webtv/2.5") != -1)
flashVer = 3;
// older WebTV supports Flash 2
else if (navigator.userAgent.toLowerCase().indexOf("webtv") != -1) flashVer
= 2;
else if ( isIE && isWin && !isOpera ) {
flashVer = ControlVersion();
return flashVer;
// When called with reqMajorVer, reqMinorVer, reqRevision returns true if
that version or greater is available
function DetectFlashVer(reqMajorVer, reqMinorVer, reqRevision)
versionStr = GetSwfVer();
if (versionStr == -1 ) {
return false;
} else if (versionStr != 0) {
if(isIE && isWin && !isOpera) {
// Given "WIN 2,0,0,11"
tempArray         = versionStr.split(" "); // ["WIN", "2,0,0,11"]
tempString        = tempArray[1]; // "2,0,0,11"
versionArray      = tempString.split(","); //
} else {
versionArray      = versionStr.split(".");
var versionMajor      = versionArray[0];
var versionMinor      = versionArray[1];
var versionRevision   = versionArray[2];
         // is the major.revision >= requested major.revision AND the minor
version >= requested minor
if (versionMajor > parseFloat(reqMajorVer)) {
return true;
} else if (versionMajor == parseFloat(reqMajorVer)) {
if (versionMinor > parseFloat(reqMinorVer))
return true;
else if (versionMinor == parseFloat(reqMinorVer)) {
if (versionRevision >= parseFloat(reqRevision))
return true;
return false;
function AC_AddExtension(src, ext)
if (src.indexOf('?') != -1)
    return src.replace(/\?/, ext+'?');
else
    return src + ext;
function AC_Generateobj(objAttrs, params, embedAttrs)
var str = '';
if (isIE && isWin && !isOpera)
    str += '';
document.write(str);
function AC_FL_RunContent(){
var ret =
    AC_GetArgs
    ( arguments, ".swf", "movie",
"clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
     , "application/x-shockwave-flash"
AC_Generateobj(ret.objAttrs, ret.params, ret.embedAttrs);
function AC_SW_RunContent(){
var ret =
    AC_GetArgs
    ( arguments, ".dcr", "src",
"clsid:166B1BCA-3F9C-11CF-8075-444553540000"
     , null
AC_Generateobj(ret.objAttrs, ret.params, ret.embedAttrs);
function AC_GetArgs(args, ext, srcParamName, classid, mimeType){
var ret = new Object();
ret.embedAttrs = new Object();
ret.params = new Object();
ret.objAttrs = new Object();
for (var i=0; i < args.length; i=i+2){
    var currArg = args[i].toLowerCase();
    switch (currArg){
      case "classid":
        break;
      case "pluginspage":
        ret.embedAttrs[args[i]] = args[i+1];
        break;
      case "src":
      case "movie":
        args[i1] = AC_AddExtension(args[i1], ext);
        ret.embedAttrs["src"] = args[i+1];
        ret.params[srcParamName] = args[i+1];
        break;
      case "onafterupdate":
      case "onbeforeupdate":
      case "onblur":
      case "oncellchange":
      case "onclick":
      case "ondblclick":
      case "ondrag":
      case "ondragend":
      case "ondragenter":
      case "ondragleave":
      case "ondragover":
      case "ondrop":
      case "onfinish":
      case "onfocus":
      case "onhelp":
      case "onmousedown":
      case "onmouseup":
      case "onmouseover":
      case "onmousemove":
      case "onmouseout":
      case "onkeypress":
      case "onkeydown":
      case "onkeyup":
      case "onload":
      case "onlosecapture":
      case "onpropertychange":
      case "onreadystatechange":
      case "onrowsdelete":
      case "onrowenter":
      case "onrowexit":
      case "onrowsinserted":
      case "onstart":
      case "onscroll":
      case "onbeforeeditfocus":
      case "onactivate":
      case "onbeforedeactivate":
      case "ondeactivate":
      case "type":
      case "codebase":
      case "id":
        ret.objAttrs[args[i]] = args[i+1];
        break;
      case "width":
      case "height":
      case "align":
      case "vspace":
      case "hspace":
      case "class":
      case "title":
      case "accesskey":
      case "name":
      case "tabindex":
        ret.embedAttrs[args[i]] = ret.objAttrs[args[i]] = args[i+1];
        break;
      default:
        ret.embedAttrs[args[i]] = ret.params[args[i]] = args[i+1];
ret.objAttrs["classid"] = classid;
if (mimeType) ret.embedAttrs["type"] = mimeType;
return ret;
// -->
<!url's used in the movie>
<!text used in the movie>
</html

I have an iMac running OSX 10.6.8 and updated to the latest flash player but the audio on youtube music still won't respond. Any suggestions besides buying a new computer?

I have an eight year old iMac running OSX 10.6.8 and just installed the latest Flash Player but the audio won't play on the youtube music website. What else do I need to update or install to listen to the music?

just installed the latest Flash Player
Did you uninstall all the previous versions of Adobe Flash Player? Did you repair permissions and restarted your computer after the installation?
Which browser & version are you using? Have you tried other browsers?
Please advise.

Just reinstalled newest iTunes and still the program fails to open. Am using Windows 7 starter. It seems that the failure to open iTunes happened just after I updated to the latest flash player. Don't know if that has anything to do with it.

iTunes will not open. I am using Windows 7, and have had no trouble with iTunes until yesterday. The only think I did yesterday was install an upgrade to the latest Flash player. From then on, even after deleting and reinstalling iTunes, it still does NOTHING after the screen authorizing iTunes to make changes to the hard drive. I have tried going to the applications and ending process. I've also tried going to Control panel - and tried to repair the program.
If I don't get some help here... iTunes is toast to me.
Thanks,
GaryFromSeffner

From then on, even after deleting and reinstalling iTunes, it still does NOTHING after the screen authorizing iTunes to make changes to the hard drive.
... Could you please post a screen shot of that screen for us, Gary? (You can use the wee camera icon at the top of your Reply window to insert an image file into a post.)

How can I make iCal in Lion open to the current date?

I just updated from Snow Leopard to Lion and have had all of the frustrations with changes to iCal that are well-documented here and elsewhere. One issue I haven't seen addressed, however, is a new behavior after quitting and re-starting.
Previously, no matter what month/day/week I was viewing when I quit iCal, it would open the next time to the current (month/day/week). Now, it opens to whatever date(s) I was last viewing when I quit.
This is highly annoying - 99% of the time, if I quit iCal while looking at (some date 6 months into the future), that is NOT the date I'm looking for when I re-launch. It's much more consistent behavior to always re-open to the current date, in whatever view (month/day/week) I previously used. So if today I launch iCal and I'm thinking about adding an event a month in the future, I open iCal, change to month view if needed, and go forward one month. This is the way iCal always worked previously. Instead, the version in Lion might leave me on any random month, depending on what I was doing when I closed the program the last time, and so I have to figure out "what month/week am I looking at?" before I know how to navigate. Very irritating. (As is the move of the forward/back buttons away from the month/day/week buttons, necessitating that I move the cursor to two different areas of the screen in order to navigate. Whose idea was THAT?)
I haven't found a preference to resolve this bizarre behavior change. Can anyone help?

Hi,
I don't know of a preference, but have you used ⌘-T in iCal?
Best wishes
John M

How can I make new tabs open next to the current tab?

New tabs are advertised in Firefox 5.0 as being set to open next the the current tab by default. Mine, however, do not do this. They open to the right of the last tab, necessitating a lot of tab-scrolling, and a minor waste of time.
I have not installed the extension that forces the tab behaviour I'm currently witnessing.
Is there a kind soul out there with any suggestions for how I can get my new tabs to appear next to the tab I'm working on?

Tabs that are "related" to the current tab, like the same domain, open to the right of the current tab. Other links that are from other domains open at the right end of the tab strip.
The pref for that actions is '''browser.tabs.insertRelatedAfterCurrent'''.
To have them all open to the right of the current tab would need an add-on, if that action even exists in an add-on.

How can I update Downloding the adobe flash player last version in my ipad2 with IOS 5?

I would like to download the last version of Adobe flash player in my IPad2. I just updated it with IOS5 but I cannot open many web from safari because the animations need flash player...

Alimar89 wrote:
Oh, and also I want to tell you that I reward and/or thanks people who deserve it.... people too embittered does not need to participate in this kind of event... :-)
Reward or thank people (or don't), as you see fit. Roaminggnome, as you can tell by his level number has been "rewarded" by lots of people. His information is generally spot on. Whether it pleases you or not, you don't get to decide who participates here and who doesn't. As long as they obey the TOU, they can stay, even if you don't like them. Ingore people who annoy you. It's what I do with people who are unable to accept help freely offered them because they don't like the packaging.
Best of luck.

How do we make a newly created tree-node the currently selected one?

Hi,
We are using JHeadstart 10.1.3 - Tree Generation. We are running into several issues with the trees, especially upon creation of new tree nodes. The Form in our Tree-Form page is Saved. At that point, we would like the new node to be the selected node in the tree (and also in the tree bean).
How do you believe can we do this? Right now, after creating the new node, we have no node selected - although it seems that the new node is selected as the normally synchronized form on the right shows that node.
Thanks for any suggestions!
Lucas

Steven,
I had not upgraded to Service Update 1 - was using Build 91. After upgrading, I see some difference, but not entirely the result I was looking for.
In a Tree-Form page on Employees, when I added an employee at the same level it still did not seem to be automatically selected.
Was wondering whether perhaps this has to do with the following comment from the source code:
          // this happens when posting back to the same node level in the tree:
          // the root node binding has no children in that case, causing derivation
          // of focus row key to fail, have to find out why root node children
          // are lost. Work around for now: return the focus row key as set by
          // the user clikcing on the nodeIf not, can you explain what this comment refers to?
thanks for your help.
Lucas

HT2128 Is it ok to download an update of the adobe flash drive on to your mac?

Is it ok to download an update of the adobe flash player on to your mac, or is it a risk to the system ?

Two things you should know about Flash:
1. Fake Flash installers are circulating on the Internet. They install a trojan instead of Flash. Only use a Flash installer that you personally downloaded from the Adobe website -- not any other site.
2. Flash is inherently insecure and exploits are found from time to time. Always make sure you have the latest version. Minimize your use of Flash by installing the ClickToFlash or ClickToPlugin Safari extension. Most Flash content is garbage anyway.

I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account. How do I make itunes sync and update my phone without deleting all the current information on my phone?

I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account and will sync, but delete everything from my phone. How do I make itunes sync and update my phone without deleting all the current information on my phone?

Iphone will sync with one and only one cpomptuer at a time. Syncing to another will erase the current content and replace with content from the new computer. This is the design of the iphone.
It will erase the content when you sync.
Why not update from the comptuer with which you normally sync?

How do I make my apple id connected to the app store?

I got my sister's ipod touch. I have gone to settings and logged off her apple id account, and logged onto mine. Now, when I went to update my apps in the app store, they asked for the password to my sister's apple id. How do I make my apple id connected to the app store?

- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

How to Disable the Adobe Flash Player and Reader Updates

Ok, For the last two months or so, I have been plagued by the Adobe Flash Player and Reader updater that will not go away. That's not the worst thing though: Somehow, someway, the Adobe updater subverts my entire windows 7 machine and makes itself the most important program on my system, stopping all other necessary functions. After I just turn it on, the updater will suspend all Windows operations in favor of the updater getting its message out the Adobe "needs" updating. I have tried updating the stupid thing, only to find that after the update goes in, my whole computer locks up and I have to load a system restore point. This thing acts like a virus, and until someone comes up with a way to make it work properly, that's what I'm calling: Adobe creates and sells a computer killing virus. I want a sure fire way to disable the updater that will work, and that will never bug me again about updating the virus. After going through three different computer repair companies, many online forums and chat rooms and my own knowledge of how to disable programs, I have instructed my firewall to block all attempts by Adobe to update. This has to stop.

Flash Player:
Adobe Reader:

EDiscovery_SharePoint 2013_After a set of content is placed on hold in a location, how do I make sure that anything added to the same location

Hi everyone,
After a set of content is placed on hold in a location, how do I make sure that anything added to the same location,that meets the filter (e.g. keyword) gets added to the hold automatically ?
Right now the only way I can do this is to take off the hold ,re-apply the filter to the source and then enable the hold. That isn't sustainable.

@arcycapa,
If you have a Mac, you can download iDentify2 (http://identify2.arrmihardies.com/). It is free. You can use that change or set your contentRating. If you are on Windows, there is a commercial tool called MetaX. or download a free command line tool called AtomicParsley from (https://bitbucket.org/wez/atomicparsley). Unzip the file and run this command (AtomicParsley "C:/Users/Home Videos/name of the file.mp4" --contentRating R) from the DOS prompt without the parenthesis. Please keep in mind the forward slash in the path name listed above. This would generate a temp file. You can rename the temp file to the original file name. Just a word of caution, please make a copy of your original file somewhere. Just in case.
Shekhar.

How do I make a user to update to the current flash player

Similar Messages

Maybe you are looking for