How to handle the current row with radio button selection???

Hi Everyone,
I have one ADF page with one table and one "Find" button.
I have created one new attribute with VARCHAR2(1) in the VO and dragged that attribute as first column in the table. And changed that first column to Radio Button to select only one row at a time.
Upon clicking on the "Find" button i need to get the values of current selected row.
How can i get the values of selected row?
What code should i write to get the values of selected row in Method Binding of "Find" button?
Any suggestions will be really useful.
Thanks.

Hello Kumar,
I have some comments on your case.
>
I have created one new attribute with VARCHAR2(1) in the VO
>
1- You should create this attribute in the Entity object and then add it to the view object.
2- Do you need that only one radio button is set at a time for all rows ? If yes then you need to handle the case when the user set more than one row and clear the value of the attribute for all other rows.
>
How can i get all the values of current row in backing bean method(method binding of Find method)?
can u plz provide me the code for that?
>
If you mean by the current row is that the row with its value of the selected attribute is set (the radio button is set for that row), then you can write a method in the viewObjectImpl class and expose it to client interface and call it from your bean.
here is an example based in Department table in HR schema.
//This method is written in DepartmentsViewImpl   
public Row getSelectedRadioRow(){
            //create a second row set to not impact the row set used in ADF
            RowSet duplicateRowSet = this.createRowSet("duplicateRowSet");
            //get the current row of the table to set it back after re-executing the VO
            DepartmentsViewRowImpl currentRow = (DepartmentsViewRowImpl)this.getCurrentRow();
            Row[] filteredRows = duplicateRowSet.getFilteredRows("IsSelected", "1");
            DepartmentsViewRowImpl row=null;
            if(filteredRows.length>0){
                row = (DepartmentsViewRowImpl)filteredRows[0];
                System.out.println("Department Name " + row.getDepartmentName());              
            this.setCurrentRow(currentRow);
            duplicateRowSet.closeRowSet();
            return row;           
        }

Similar Messages

  • Can any one tell me how to change the current row header in FB1LN tcode

    Hi,
    can any one tell me how to change the current row header in FB1LN tcode.
    I want to show input date also in the layout.
    Regards
    Mave

    Hi
    I know two ways:
    - transaction obvu: here you can insert new fields, but only if these fields are included in certain table (like BKPF, BSEG, BSIS.....
    - if your field isn't included in those table, you have to modify the structure RFPOS and manage it in the BTE 1650. After updating RFPOS you have to run the program RFPOSXEXTEND to update the structure RFPOSXEXT.
    Max

  • How to add the BexAnalyser as standard radio button to the add-ins?

    HI All,
    how to add the BexAnalyser as standard radio button to the add-ins.
    Thanks
    Vasu

    What do you want to do? Pls give some more details.

  • How to set the a  graphic ( 3 radio buttons ) in the report ?

    Hi  Exports,
    1.  How to set the a  graphic ( 3 radio buttons ) in the report ?
    Acutely  I  want to  fetch the record from MCHB-CLABS and MCHB-CSPEM , if the data read from MCHB-CLABS will show the green light otherwise if read from MCHB-CSPEM, it will show red light.
    (e.g :  if syntax error in report  it is showing red light signal , like that how to set in report program)
    Thanking you.
    Subash

    Hi,
    In your internal table declaration, include yet another field for lights..
    DATA: begin of itab,
               lights type light,
              end of itab.
    DATA: GV_LAYOUT TYPE SLIS_LAYOUT_ALV.
    GV_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
    Use the GV_LAYOUT in your FM to display the ALV.
    IS_LAYOUT                         = GV_LAYOUT
    If itab-lights = 1 => Error
      itab-lights = 3 => Success
      itab-lights =2 => Warning

  • Q: How to retrieve the current URL with PL/SQL

    I've got a pair of dynamic page portlets on a page. The first is simply an input text box and a submit button, the second is an inventory 'report' based on what is entered in the text box. When a value is entered and the button pressed, there is javascript behind the button that takes the current URL, adds '&ITEM=XXXXXXXX' (removing it first if this is not the first invocation of the page), and redirects to the new page.
    The second portlet uses the &ITEM parm to list a bill of materials for the item. If one of the items possesses a sub-assembly, I want to display the item# in an <a href= manner to make it so the user can simply click on the link to see the BOM of the subassembly.
    To do this, I believe I need to capture the current url and modify it as required to pass the new &ITEM value. I'm having a lot of trouble trying to figure out how to get the current page url. Any help would be greatly appreciated!
    Geoff

    Hello
    I have a similar problem I have developed a pl/sql portlet and put it into a page, this portlets display a dynamic page. This dynamic page have a search functionality, what I am trying to do is that when I click the search button on the dynamic page it recall the whole page and pass the paremeter that the user wrote on the search box, then the portlet that contains the dynamic page recieve the parameter and recall the dynamic page with the parameter that was received. The problem that I have is that the portlet receive the parameter but when I pass the parameter to the dynamic page it doesn't get it. This is the way the I am calling the dynamic page inside my portlet into the show procedure:
    EXECUTE IMMEDIATE
    'begin
    APP_NAME.PG_DYN_DIR_ALFABETICO.show (
    p_arg_names => PORTAL30.wwv_standard_util.string_to_table2(''url_page'',''search_param''),
    p_arg_values => PORTAL30.wwv_standard_util.string_to_table2(:1,:2));
    end;'
    using url_pg,p_text1;
    The dynamic page receive the first parameter(url_page) but not the second one(p_text1), I have checked that the p_text1 has a value on my portlet before I send it to the dynamic page so I really don't understand why my dynamic page doesn't work.
    Please HELP ME. I am desperate
    Ana Lasprilla

  • How to Handle the chaned rows and new added rows into ALV in OPPS alv .

    Hi All,
    I have developed a [program in which i am able to append a row or change and existing row.
    when i press save button and handle the user command in PAI of Screen, in the internal table of ALV some records are missing which are inserted in the last.
    Could You please guide me how can i handle the change rows and appended rows
    Regards,
    Deepak

    Hi ,
    as avinash said , u need to use check_changed_data Method in order to get all records ,
    code will be like this
    PAI
    user-command.
    case sy-ucomm.
    when 'ENTER'.
    call method G_grid->check_changed_data.
    call method g_grid->refresh_table_display.
    when 'SAVE'.
    call method G_grid->check_changed_data.
    call method g_grid->refresh_table_display.

  • How to hide/show reports region with radio group selections

    Hi, I have an HTML region with a radio group of two choices (Rpt1 and Rpt2). Also got two other report regions which depend on the radio group selections and by pressing a button it will display records.
    Everything does work perfect BUT say I select Rpt1 and press the report button it will show the records and after that if I select the Rpt2 radio button I still see the result of Rpt1 records. How can I clear or hide the reports regions when I change my radio button selection?
    Thank you
    -iahmadi

    Hi,
    You can create HTML regions that do not need to contain anything at all (use the "No Template" region template to ensure that you don't see a region Title on the page).
    However, in order to get this region to be displayed until the Report button is clicked, you would need to have a hidden page item (called, say, P1_SHOW_REPORT) that has, as a default, 0 as a value. The branch that is triggered by the Report button would then set this item to 1 - so, 0 = hide and 1 = show
    On your page you should have a branch that is conditional on the Report button being clicked. On this branch, set the first "Set these items" to P1_SHOW_REPORT and "With these values" to *1*. You should also have a branch on the page that is unconditional - meaning that it can be triggered by anything that submits the page. Firstly, this branch should have a high Sequence Number (say, 99) and secondly, should should set the value of P1_SHOW_REPORT to *0*. So the Report button sets it to 1 and anything else (which will include the radio button selections) will reset it to 0.
    Now, on your regions you have to change the conditions slightly as we now have two conditions to check - which report has been selected and whether or not the Report button has been clicked.
    This can be done by using a SQL Exists condition of something like:
    SELECT 1 FROM DUAL WHERE :P1_SHOW_REPORT = 1 AND :P1_RADIO = 'ABC'(where ABC is the value for the radio button for the report
    The "blank" region would also have a condition - that would be a simple Item = Expression 1 condition of P1_SHOW_REPORT = 0
    Andy

  • How do I move a table with radio buttons to another page?

    I created a document in Word, converted to PDF, added a page (which was created in Adobe Forms Central, only way to get a table with radio buttons - see below for example).
    The issue I have is whilst using the Trial of Adobe XI Pro I was able to move this table up a page and place it under the header.  Now that the trial has run out I cannot complete this task with other documents.
    I started to edit using LiveCycle but it won't let me move the table.
    We have Acrobat X Pro but when I go to edit, it directs me to edit in LiveCycle.  I have tried moving the table using all of these programs.  Can anyone help/guide please? 

    Thank you for your reply.  I am new to editing a pdf and using these programs. I have subscribed to Acrobat XI Pro.  When I try to edit the document it directs me to LiveCycle.  I cannot move the table in LiveCycle.  It won't let me, and I cannot make changes in XI Pro as I did in the trial as it directs me to edit in LiveCycle.  Am going in circles.

  • How to change the "Address is Residential" radio button to default "off"

    Hello, I am attempting to set the "Address is Residential" radio button under UPS shipping option to default "off". Our company sells mainly to business locations, and the button is causing confusion and incorrect shipping rates with our customers. Sorry if this has been covered before, I have seen a few discussions when googling the topic, however their links are not working.
    Thanks!

    Hi,
    The option cannot be changed but a possible workaround to avoid client confusion is to hide this div, using some custom JavaScript script that will hide it after is rendered by the shipping option tag.
    Unfortunately I do not have the exact script but will leave this topic open for the community to assist if possible.
    Kind regards,
    -Sidney

  • How to set the value of an radio button using set_radio_button_property

    I'd like to set the value of an radio button dynamically, depending of the situation.
    (=> the value which the object returns to the radio group)
    Means: the 'radio button value' of my object 'rb_1' shall be 1, in other circumstances 99 and so on.
    Is it possible to set this value at runtime ?

    the problem is as Gerd wrote:
    there are two or more radio buttons in an option group.
    Their value depends on the text objext t_field.
    If t_field is "car" the value of radio button 1 shall be 75, button 2: 90 and button 3 115.
    if t_field is "bus" the value of radio button 1 shall be 250, button 2: 275 and button 3 300 and so on.
    My problem is to set the value of the radio buttons at runtime after choosing/typing the value of the text field t_field.
    Message was edited by:
    PatrickM

  • How to get the items of a radio button under each other?

    I want to place the items of a radio button : selectOneRadio under each other, but it doesn't work..
    The code I am using is :
                                                 <h:panelGrid columns="1" cellspacing="0" cellpadding="2"
                                                      border="0" styleClass="subitems">
                                                      <h:selectOneRadio value="#{travelerDataBean.travelParty}" >
                                                                <f:selectItems value="#{travelerDataBean.travelParties}" />
                                                      </h:selectOneRadio>
                                                 </h:panelGrid>
    Can someone help me?
    Thanks

    Use-
    .............layout="pageDirection"....................-- raju

  • How to set the current row in table automatically when tabout from one row to next row

    Hi
    I'm using jdev 11.1.2.0.0
    How can we set the  row(in which row focus is)  as current row in the table?
    If we create a table with single row selection, then whichever row we select, that row becomes current row because of the selection listener(#{bindings.xxvo.collectionModel.makeCurrent}).
    Then if we do tabout from one component to another component in table and moved to next row, then the focus would be on another row .
    when focus is shifted from one row to another row, then how can we make the focused row as current row or selected row.
    Any suggestion would we appreciated
    Thanks.

    Add clientListener inside table component and set client listener type to dblClick with method as a JavaScript method name.
    <af:clientListener method="dblclk" type="dblClick"/>

  • How to handle the dynamic rows in pdf table

    Dear All,
    earlier i posted one thread reagarding getting pdf table data
    [facing problem while getting interactive form table data;
    this is working fine, i sued bind_table in wddoinit, but here i am fixing the rows count and bind_table.
    for example i have initially taken row count as 3 then i want to increase the rows in pdf table.
    i know we can use the formcalc to increase the rows by taking a button in pdf layout.
    this also working, but the data is not picking for newly added rows, i hope the problem is because the table node in the context is not binded for this new rows.
    even i tried using with webdynpro native button controlls still not working.
    any one help me what exactly this bind_table is doing and how to handle this code in form calc.
    since my table is pdf table.
    Thanks,
    Mahesh.Gattu

    Hi Thomas,
    Thanks for your confirmation,
    i have checked the paramets of submit button we have only wdevent parameters they are
    CL_WD_CUSTOM_EVENT
              PARAMETERS - Hashed table having 2 columns
              ID     ->IF_TDS (Interactive Form element Name)
             CONTEXT_ELEMENT     ->->
    these are same in case of submit button1 and submit button 2.
              NAME - Name of the Button Event i.e ON_SUBMIT (  this is also same in both the buttons).
    so i think it is not possible to work with multiple buttons by assinging to multiple tables on form.
    The other option is to place the buttons outside of the forum in the surrounding WDA area.
    This way you have no problem handling the events.
    in wddoinit if i use bind_table with 5 rows form table is populating with 5 rows, but when i take a button
    out side the form and use bind_table by incremeting the rows the pdf table rows are not adding, if i enter
    some thing on pdf table then click on add row button then the table rows are getting add. if i don't do any
    action on pdf table and click on add row button pdf is not getting update.
    is there any issue.. if i don't keep cursor on table and type some thing.. the add button is not updating
    the rows.
    if i take a  button on wd view i.e outside the form and use bind table i shall add the rows.. but in case of remove rows how to do.
    in case of normal table we can use Remove_Element( ) but how can i know the selected row from the pdf table, please help me in this concern also.
    Regards,
    Mahesh.Gattu
    Edited by: Maheshkumar gattu on Jan 7, 2009 3:57 PM
    Edited by: Maheshkumar gattu on Jan 7, 2009 4:03 PM
    Edited by: Maheshkumar gattu on Jan 7, 2009 5:21 PM

  • How to handle the Rowalreadydeleted,Row inconsistent exception in adf

    Hi all,
    In my application user can update,delete the database table.
    If one user deletes the row and other user tries to update the same row then i am getting the error and the user how got this error was not able to perform any operation on other rows.
    how can i overcome this scenario.
    Thanks in advance

    may be this will help you
    http://jobinesh.blogspot.com/2010/03/what-you-may-need-to-know-about-nested.html
    and from jobinesh comment's
    If you need locking and want to find the root cause for the RowInconsistentException, then probably the following points may help you
    1.Please check whether your EO has a attributes populated by DB trigger(update/insert).If yes, set the right 'Refresh After' property for this attribute.
    2. Please see this post http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/, thttp://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/
    This link contains some code snippet which can be used to identify the attribute which cause the RowInconsistentException

  • How to create the new row with existing values

    Hi all,
    first of all i create a row,
    i opened that in edit mode,
    suppose i want to edit any one of the value in that recordd,
    that time compulsory create a new row with those valuess.
    how can i create a new row with those valuess.

    Hi Anusha,
    This code correct for your requirement, only thing is you are not able to modify it as per your requirement.
    What you have to do is:
    1. Copy queried row into into new row, change primary key values(but don't commit your changes here).
    2. Now you have two rows in your VO(OLD as well as New)
    3. Make any changes if you want using User Interface.
    4. At the save button first compare OLD and NEW row, if any value is differing then commit the chnages(it will insert new row in corresponding database table), if no changes are there I mean to say OLD value and NEW rows are same then rollback(it will remove copied row from VO and no row will be inserted in database.)
    While comparing rows please note that Primary keys will not be same so don't compare Primary keys while comparing rows.
    I hope it will help you.
    Regards,
    Reetesh Sharma

Maybe you are looking for