How do I notify errors and inaccuracies in HERE ma...
HERE Maps doesn't seem to have any way of allowing useres to notify errors and inaccuracies. Parts of the Denmark road network have changed and one new junction, at least is, wrong, with cycle tracks approaching an Expressway roundabout/bridge marked as roads, making user believe they can drive where they can't and have to drive back many kilometres. This needs fixing.
Options please.
Now using a 520 for a lot of functions, I will not, however, refrain from expressing my annoyance at Symbian Belle maps being frozen on e.g. my E6 less than 2 years after I bought the phone. Nobody at Nokia care any more, but that doesn't justify a wrong decision!!
hughm_nyksj_dk
You can report an issue on the HERE website.
Find the area you have an issue with, right click and report the issue.
http://here.com/mapcreator/56.32711736117158,12.239503965004758,7,0,0,satellite.here
Similar Messages
-
How to display the error and success message in ALV
Hi expert,
i am doing recording through call transaction,from the output list of a ALV,now my requirement is after recordig how many record get success and how many get failed ,i need to display in Another ALV .please any one help me in this .
Regards
SwarajHI ,
Use this following Perform form statment to display error message.
FORM format_message .
g_row = g_row + 1.
LOOP AT t_bdcmsgcoll.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = t_bdcmsgcoll-msgid
lang = '-D'
no = t_bdcmsgcoll-msgnr
v1 = t_bdcmsgcoll-msgv1
v2 = t_bdcmsgcoll-msgv2
v3 = t_bdcmsgcoll-msgv3
v4 = t_bdcmsgcoll-msgv4
IMPORTING
msg = G_MSG
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
CASE T_BDCmsgCOLL-msgtyp.
WHEN 'E'.
FORMAT COLOR 6 ON.
WRITE:/ g_row,
/ T_BDCmsgCOLL-msgtyp, g_msg.
FORMAT COLOR OFF.
WHEN 'W'.
FORMAT COLOR 3 ON.
WRITE:/ g_row,
/ T_BDCmsgCOLL-msgtyp, g_msg.
FORMAT COLOR OFF.
WHEN 'I'.
FORMAT COLOR 4 ON.
WRITE:/ g_row,
/ T_BDCmsgCOLL-msgtyp, g_msg.
FORMAT COLOR OFF.
WHEN 'S'.
FORMAT COLOR 5 ON.
WRITE:/ g_row,
/ T_BDCmsgCOLL-msgtyp, g_msg.
FORMAT COLOR OFF.
ENDCASE.
ENDIF.
ENDLOOP.
ENDFORM. " FORMAT_MESSAGE
*& Form success
text
FORM success .
LOOP AT i_message.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = i_message-msgid
lang = sy-langu
no = i_message-msgnr
v1 = i_message-msgv1
v2 = i_message-msgv2
v3 = i_message-msgv3
v4 = i_message-msgv4
IMPORTING
msg = g_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
WRITE : /2 g_msg COLOR 1.
CLEAR G_MSG.
ENDLOOP.
ENDFORM. " success
*& Form error
FORM error .
DATA g_msg(255).
LOOP AT i_message.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = i_message-msgid
lang = sy-langu
no = i_message-msgnr
v1 = i_message-msgv1
v2 = i_message-msgv2
v3 = i_message-msgv3
v4 = i_message-msgv4
IMPORTING
msg = g_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
WRITE : /2 g_msg COLOR 6.
ENDLOOP.
ENDFORM. "error -
How to catch date errors and continue processing in a PL/SQL procedure
I'm updating a date field with dates constructed from day, month and year fields. The incoming data has many instances of day and month that are not valid dates, ex 11 31 2007. There is no 31st day in November.
I would like to write a pl/sql script to scan the table containing these values and log the rows that produce conversion errors.
I thought I could do this with exceptions but there are no exceptions that correspond to the ORA-01847 error for mismatched day and month.
Here is what I tried (the print procedure is a local wrapper for DBMS_OUTPUT.put_line):
PROCEDURE date_check IS
start1 DATE ;
BEGIN
select to_date(nvl(yearcollected,'9999') ||'/'|| nvl(monthcollected,'01') ||'/'|| nvl(daycollected,'01'),'YYYY/MM/DD'))) into start1 from incoming_data where id=1 ;
BEGIN
update temp_test set test_date = start1 where id=1 ;
EXCEPTION
WHEN OTHERS THEN
print('Date error message from exception block');
END;
print('Processing continues after handling date exception') ;
END date_check ;
Is there a way to catch this kind of error and continue processing after logging a message?
-=beekyHi, Beeky,
There are lots of different error messages associated with bad dates. Rather than try to catch them all, I use a BEGIN ... EXCEPTION block that contains nothing but a TO_DATE call. This is one of the rare occassions when I think "EXCEPTION WHEN OTHERS" is okay,
The following function comes from a package. If you want to make a stand-alone function, remember to say " *CREATE OR REPLACE* FUNCTION ...".
-- ** t o _ d t **
-- to_dt attempts to convert in_txt (assumed to
-- be in the format of in_fmt_txt) to a DATE.
-- If the conversion works, to_dt returns the DATE.
-- If the conversion fails for any reason, to_dt returns in_err_dt.
FUNCTION to_dt
( in_txt IN VARCHAR2 -- to be converted
, in_fmt_txt IN VARCHAR2 DEFAULT 'DD-MON-YYYY' -- optional format
, in_err_dt IN DATE DEFAULT NULL
RETURN DATE
DETERMINISTIC
AS
BEGIN
-- Try to convert in_txt to a DATE. If it works, fine.
RETURN TO_DATE (in_txt, in_fmt_txt);
EXCEPTION -- If TO_DATE caused an error, then this is not a valid DATE: return in_err_dt
WHEN OTHERS
THEN
RETURN in_err_dt;
END to_dt
; -
How to capture mapping error and able to send it..
Hi Friends,
We have a requirement, where in, if a mapping fails due to missing required element or improper formation of the source xml message, we need to capture this and need to create an error message, which contains the error description as one of the elemnets and send it to the concerned system back. Basically, it is to let the sending system know that, what went wrong.
Is there any api available which can capture the mapping error and which could be used under java mapping used for exception handling? Any pointers in this regard would be of utmost helpful.
Regards,
VijayVijay,
You can throw some exceptions like mentioned in the weblog:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
Once you see this message your support guys should check the message and let the sender system side know about this.
---Satish -
How to capture DB Errors and display as pop-up message
Hi All,
I am using Jdeveloper 11g Release 2 (11.1.2.3.0).
In my AppModuleImpl.java, I defined a class to call PL/SQL procedure and exposed the same as Client interface. Pulled this method from data control on to a page a Button. The functionality is working fine.
Can you suggest me, what is best way to achieve the below functionality.
1. If there is any DB errors during PL/SQL procedure, how to catch and display the Errors / Warning in Pop-up message.
2. How to display info message on successful completion in Pop-up.
regardsHi,
+1. If there is any DB errors during PL/SQL procedure, how to catch and display the Errors / Warning in Pop-up message.+
Throw a custom exception that extends the JboException class.
See:
http://www.oracle.com/technetwork/issue-archive/2013/13-mar/o23adf-1897193.html
http://jobinesh.blogspot.de/2011/03/customizing-business-components-error.html
+2. How to display info message on successful completion in Pop-up.+
Option 1.
you can either return "true" or "false" from the method so that you can call
OperationBinding plsqlOperationBinding = .... get access to themethod binding to invoke the PLSQL method call ....
String result = plsqlOperationBinding.execute();
if(result.equlasIgnoreCase("true"){
RichPopup popup = ... get reference to popup defined on the page
RichPopup.PopupHints hints = new RichPopup.PopupHints ();
popup.show(hints);
Option 2
OperationBinding plsqlOperationBinding = .... get access to themethod binding to invoke the PLSQL method call ....
plsqlOperationBinding.execute();
if(plsqlOperationBinding.getErrors().size == 0){
RichPopup popup = ... get reference to popup defined on the page
RichPopup.PopupHints hints = new RichPopup.PopupHints ();
popup.show(hints);
Frank -
How to display FRM Error and corresponding ORA error into alert
hello
I m able to catch FRM Error through ON-ERROR Trigger with help of ERROR_CODE
and ERROR_MESSAGE
Now i want to know how can i catch ORA error (If Exists )Corresponding to that FRM error .
Any help will be grately appricated.
Waiting for Reply......................................hello
i tried following code but it will not display alert..............
i write following code into .pll file and i called this function on ON_ERROR trigger
but it will not display alert
declare
errcode NUMBER := ERROR_CODE;
dbmserrcode NUMBER;
dbmserrtext VARCHAR2(200);
begin
IF errcode = 40508 THEN
/* ** Form Builder had a problem INSERTing, so
** look at the Database error which
** caused the problem.
dbmserrcode := DBMS_ERROR_CODE;
dbmserrtext := DBMS_ERROR_TEXT;
IF dbmserrcode = -1401 THEN
** ORA-01438 is "value too large for column"
g_fun.MSGBOX('Your number is too large. Try again.');
ELSIF dbmserrcode = -1400 THEN
** ORA-01400 is "Mandatory column is NULL"
g_fun.MSGBOX('You forgot to provide a value. Try again.');
ELSE
** Printout a generic message with the database
** error string in it.
g_fun.MSGBOX('Insert failed because of '||dbmserrtext);
END IF;
END IF; -
How to raise application error and preserve open cursor...
Hello,
I have to raise an application error under certain circumstances.
In some cases there's an open cursor that has to be read by the calling application anyway because there are data that have to be read.
In other cases the cursor does not have to be read.
sample code:
create or replace procedure get_address(
pv_street varchar2,
pv_number varchar2,
pr_retid in out number,
pr_refcurs in out get_streetpkg.t_refcurs )
v_rowcount number;
v_no_suiting_number boolean := false;
begin
delete temp_addr;
-- get suiting rows
insert into temp_addr
select * from addr
where street like pv_street
and number like pv_number;
v_rowcount := sql%rowcount;
-- if no suiting row found then get all
-- suiting streets regardless of number
if v_rowcount = 0 then
v_no_suiting_number := true;
insert into temp_addr
select * from addr
where street like pv_street;
end if;
-- check whether data has been found
select count(*)
into v_rowcount
from temp_addr;
-- set return id if only one row is found.
if v_rowcount = 1 then
select id from temp_addr
into pr_retid;
end if;
-- open cursor to provide data
open pr_refcurs for
select * from temp_addr;
-- generate error - if no data found at all
-- no data has to be read...
if v_rowcount = 0 then
raise_application_error( -20001, 'no data found' );
end if;
-- generate error - or better notification - message if no number found...
-- SELECTED ROWS HAVE TO BE READ ANYWAY!!!
if v_no_suiting_number then
raise_application_error( -20002, 'streets found, but no suiting number' );
end if;
return;
end;
Prerequisites:
- The calling application reads the open cursor and closes it.
- The application cannot provide additional arguments and the stored proc cannot be converted into a stored func.
- I cannot put the procedure into a package.
- The application has to get information about success or failure (and reason of failure) through provided error numbers (-20999..-20000).
Whenever the error is raised and pr_retid was set, retid is not set in the application, neither is the cursor.
So what can I do to provide return ID and row data???
Hope anyone can help me.
Greetings, Heiko Kaschube
nullSorry, I didn't read your list of pre-requisites carefully enough. Your problem is that prerequiste #4 (return Application Error number) is in flat contradiction with prerequisite #1 (calling application continues processing).
To restate: RAISE_APPLICATION_ERROR means "the called program has encountered a problem so please cease processing and handle the error". Using RAISE_APPLICATION_ERROR prevents the calling program doing any more processing: control goes to the EXCEPTION handler. Therefore RAISE_APPLICATION_ERROR should only be used for abnormal processing conditions.
I fail to see why you want to use RAISE_APPLICATION_ERROR to handle a situation which is quite obviously not an application error: your called program has found some data that you want to process.
yours in puzzlement, APC -
Regarding Workflow Error and Notification problem
Hi,
I am working on Workflow. I imported data <b>first time</b> in Data Manager and created <b>new</b> workflow. Now while "Launching" this workflow it is showing error "<b>The record is currently used in workflow</b>".
I was using this repository for other data with different workflow but i deleted all previous data and workflow. Why it is showing this error? When i have new set of data with new workflow than i think i should not show this error.
Other Question is regarding <b>Notification</b>:
To notify the person we have to make following changes :
1) Have to use Notify stencil and have to give e mail ids in User detail
2) In my server ini file i have to give my mail server name.
After making this changes I am not getting any mails. Please guide me for the same.
Please guide me how to rectify this error and what are the prerequisites?
Thanks in advance,
RonakHi Ronak,
Couple of issues with emailing:
1. You need to restart your repository after updating .ini file to effect the changes.
2. Your SMTP server should relay mails without SMTP authentication.
3. You can also send emails to outside domains such as yahoo or others if your SMTP server permits.
Check with your mail server administrator and perform a simple SMTP telnet test to make sure your SMTP server is not an issue.
Hope this helps
Venkat -
How to handle transport errors????
Hi Gurus.
How to handle transport errors and create a workflow email to the owner of the transport from solution manager??Solution manager does provide automatic e-mail notification when status changes or error occures.To answer your question when ever transport fails ..you can configure such way that a support message can create automatically and notify support team / respective person.
If you are not using any t-code do you have any thoughts where you can create transport request???? and are you using solution manager only for maintanence project or for implimentation project also????
Hope this helps you....
Praveen -
ORA-04031 . how to remove this error.
Hi Guys,
when i try to run one of my query based on a view, i get the following error:
ORA-04031: unable to allocate 4096 bytes of shared memory ("large pool","unknown object","sort
subheap","sort key")
I have no idea if this error is related to memory or what. Pliz help how to resolve this error and run my query.
Regards,
Imran Baig[oracle@demo oracle]$ oerr ora 4031
04031, 00000, "unable to allocate %s bytes of shared memory (\"%s\",\"%s\",\"%s\",\"%s\")"
// *Cause: More shared memory is needed than was allocated in the shared
// pool.
// *Action: If the shared pool is out of memory, either use the
// dbms_shared_pool package to pin large packages,
// reduce your use of shared memory, or increase the amount of
// available shared memory by increasing the value of the
// INIT.ORA parameters "shared_pool_reserved_size" and
// "shared_pool_size".
// If the large pool is out of memory, increase the INIT.ORA
// parameter "large_pool_size".
[oracle@demo oracle]$ -
When setting up email via secure smtp and imap there is an error because of self signed cert and i am unable to complete the setup process. I know that
the ssl cert is invalid and ready to deal with it better than leave plain text connection. How to ignore ssl errors and continue with email setup?Hello akamit,
If I understand your question correctly, I think there is no ready solution for this situation. You could have a look at https://bugzilla.mozilla.org/show_bug.cgi?id=874346 - the discussion there may help you to understand the problem in more detail.
Kind regards. -
How do I fix the apple sync notifier error
Everytime I start my computer I get this Apple sync notifier error. How do I fix this? I have an ipod touch and I've uninstalled and reinstalled itunes and it still isn't fixed.
Have you tried looking at the previous discussions with your same problem that are listed on the right side of this page under the heading "More Like This".
-
How do I stop my iTunes from getting an "error and has to close" message?
When I open iTunes, it wants to update my Music Match and I get an error message that "iTunes has experienced an error and has to close". How do I prevent this?
No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
Regards. -
My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Maybe you are looking for
-
Mac os 10.8 recovery partition issues!
I am wanting to use the recovery partition in mac os 10.8 to re-install the os on my hard drive, it keeps on getting an error right after I click on the continue button with wifi on and after checking with apple wirelessly! can anyone help me?
-
Hello, I have a large collection of pictures (More than 20.000) that I still need to import to my iPhoto. I didn't imported yet because I still have some concerns about iphoto. My pictures are organized in folders, something like: ~/eduardo/Pictures/
-
Need help on Acrobat 9.0 Pro
Is it possible to convert an Adobe PDF file back into a Word Document and be able to Manipulate it?
-
DNG codec doesn't support descriptive tags in Windows 7
I installed the Adobe DNG codec yesterday which does indeed make it possible for Windows Explorer, Windows Media Player, Windows Live Photo Gallery and Windows Media Center to display DNG files (as thumbnails and as full sized images). I discovered
-
I have an events calendar that gives the user the option of saving a particular event in their Outlook calendar. The link is a simple getURL(); call to the an .ics calendar file. In IE everything is fine. The user is given an option to either save th