How to display the error and success message in ALV

Hi expert,
i am doing recording through call transaction,from the output list of a ALV,now my requirement is after recordig how many record get success and how many get failed ,i need to display in Another ALV .please any one help me in this .
Regards
Swaraj

HI ,
             Use this following Perform form statment to display error message.
FORM format_message .
g_row = g_row + 1.
LOOP AT t_bdcmsgcoll.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = t_bdcmsgcoll-msgid
        lang      = '-D'
        no        = t_bdcmsgcoll-msgnr
        v1        = t_bdcmsgcoll-msgv1
        v2        = t_bdcmsgcoll-msgv2
        v3        = t_bdcmsgcoll-msgv3
        v4        = t_bdcmsgcoll-msgv4
      IMPORTING
        msg       = G_MSG
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc = 0.
      CASE T_BDCmsgCOLL-msgtyp.
        WHEN 'E'.
          FORMAT COLOR 6 ON.
          WRITE:/ g_row,
                / T_BDCmsgCOLL-msgtyp, g_msg.
          FORMAT COLOR OFF.
        WHEN 'W'.
          FORMAT COLOR 3 ON.
          WRITE:/ g_row,
                / T_BDCmsgCOLL-msgtyp, g_msg.
          FORMAT COLOR OFF.
        WHEN 'I'.
          FORMAT COLOR 4 ON.
          WRITE:/ g_row,
                / T_BDCmsgCOLL-msgtyp, g_msg.
          FORMAT COLOR OFF.
        WHEN 'S'.
          FORMAT COLOR 5 ON.
          WRITE:/ g_row,
                / T_BDCmsgCOLL-msgtyp, g_msg.
          FORMAT COLOR OFF.
      ENDCASE.
    ENDIF.
ENDLOOP.
ENDFORM.                    " FORMAT_MESSAGE
*&      Form success
      text
FORM success .
LOOP AT i_message.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = i_message-msgid
        lang      = sy-langu
        no        = i_message-msgnr
        v1        = i_message-msgv1
        v2        = i_message-msgv2
        v3        = i_message-msgv3
        v4        = i_message-msgv4
      IMPORTING
        msg       = g_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    WRITE : /2 g_msg COLOR 1.
    CLEAR G_MSG.
ENDLOOP.
ENDFORM.                    " success
*&      Form error
FORM error .
DATA g_msg(255).
LOOP AT i_message.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = i_message-msgid
        lang      = sy-langu
        no        = i_message-msgnr
        v1        = i_message-msgv1
        v2        = i_message-msgv2
        v3        = i_message-msgv3
        v4        = i_message-msgv4
      IMPORTING
        msg       = g_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    WRITE : /2 g_msg COLOR 6.
ENDLOOP.
ENDFORM.                    "error

Similar Messages

How to display your email and a message to finder on the lock screen of an iPhone?

Hi,
I loose things, including phones and keys...
To prevent a worst case scenario: How to display your email and a message to finder on the lock screen of an iPhone? (6 plus, current iOS)
That is, I assume most people finding an iPhone would want to try to contact me to give it back to me, if they know how: how can leave my contact information in the phone? This needs to be on the lock screen, naturally, as this is the only view the finder can see. It would be useful to be able to add a message of sorts a la "if found please call my wife ### or email me ###".
How can this be done other than editing the JPG of the wallpaper, or sticking a business card to the back of the phone (these are the only solutions I came up with, there must be something better).
Cheers!

Greetings _daniel_,
Thank you for contributing to the Apple Support Communities.
It seems like you'd like to display a message on your iPhone 6 Plus in the event it is lost. Good news--you can do this with the Find my iPhone feature of iCloud.
Check out these links for more information:
iCloud: Set up iCloud
iCloud: Use Lost Mode
If you can’t find your device, use Lost Mode right away to lock it with a passcode, display a custom message on the screen, and keep track of its location.
Cheers,
Jeremy

How to display the variable content in message?

Hi anybody
please let me know How to display the variable content in message?
please send few lines of sample code to understand that
thanks in advance

Hi,
Check out the link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/840b42202cce6ce10000000a155106/content.htm
REPORT Y9020027 LINE-SIZE 130.    "Release 3.1G, 4.5A
BREAK-POINT.
MOVE: 'TESTREPORT for    "ASSIGN FFeld+o(l) TO "        '
        TO SY-TITLE.
      Declaration of variables    **********************
FIELD-SYMBOLS <FS1>.
DATA: FFELD8(8)   TYPE F VALUE '1022333'.   "Unusual: Explicit 8 bytes
*DATA: ZFELD1(2)    TYPE N.            "Here slack bytes are (DW border)
                                     "necessary
              "If you like computing error, please uncomment the above
DATA: FFELDX(8)   TYPE F VALUE '7777777'.
DATA: FFELDA(8)   TYPE F VALUE '7333213'.
DATA: NFELDX(400) TYPE N.
DATA: OFFX(4) TYPE I VALUE 160.
DATA: LENX(4) TYPE I VALUE 8.
              Main Section             *******************
    SKIP.
    WRITE: /5 'Example 1   **** inadmissible ASSIGN ***' COLOR 6.
    WRITE: /10 'Inadmissible ASSIGN: ''ASSIGN FFELD4+1(3) TO <FS1>'' '.
ASSIGN FFELD4+1(3) TO <FS1>.
    ULINE.
    SKIP 2.
    SKIP.
ASSIGN FFELD8+8(8) TO <FS1>.     "<-- Assigning of variable FFELDX !!
    BREAK-POINT.
    WRITE: / 'ASSIGN command with FFELD8, but FFELDX will be assigned'
              COLOR 3.
    WRITE: /5 'Example 2'.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDX      :', FFELDX.
    ULINE. SKIP 2.
    SKIP.
ASSIGN FFELD8+16(8) TO <FS1>.    "<-- Assiging a few FFELDA to <FS1>
    BREAK-POINT.
    WRITE: / 'ASSIGN with FFELD8, but instead FFELDA is assigned'
              COLOR 3.
    WRITE: /5 'Example 3'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    ULINE. SKIP 2.
BREAK-POINT.
   DO 4 TIMES.
     ASSIGN FFELD8+OFFX(LENX) TO <FS1>.     "Zuordnung auf OFFX zu <FS1>
        WRITE: / 'ASSIGN command with FFELD8, es wird NFELDX zugeordnet'
                  COLOR 5.
         WRITE: /5 'Example 4', 'DO-Schleife Nr.:', SY-INDEX.
         PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
         WRITE: /10 'Content of NFELDX145(40) :', NFELDX145(40).
         ULINE. SKIP 2.
         ADD 8 TO OFFX.
   ENDDO.
               Subroutines             *******************
           Display of data fields and field symbols                  *
FORM DISPLAY-FFELD USING FFELD FNAME.
WRITE: /10 'Content of', FNAME, ':', FFELD.
PERFORM FELDEIGENSCHAFTEN USING FFELD.
WRITE: /10 'Content of <FS1> :', <FS1>.
PERFORM FELDEIGENSCHAFTEN USING <FS1>.
ADD   111    TO <FS1>.               "<-- Das Feldsybmol wird verwendet
WRITE: /10 'ADD 111 TO <FS1>'.
ULINE.
WRITE: /10 'Content of', FNAME, 35 ':', FFELD.
WRITE: /10 'Content of <FS1>', 35 ':', <FS1>.
ENDFORM.
   Determination of field properties (only for information)          *
FORM FELDEIGENSCHAFTEN USING ALLG.
DATA: FLAENGE(2) TYPE N.
DATA: FTYP(1) TYPE C.
DATA: FOUT(2) TYPE N.
DATA: FDEZ(2) TYPE N.
ULINE.
DESCRIBE FIELD ALLG LENGTH FLAENGE.
WRITE: /10 'Field length :', FLAENGE.
DESCRIBE FIELD ALLG TYPE FTYP.
WRITE: /10 'Field type    :', FTYP.
DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
WRITE: /10 'Output length :', FOUT.
DESCRIBE FIELD ALLG DECIMALS FDEZ.
WRITE: /10 'Decimals      :', FDEZ.
SKIP 1.
ENDFORM.
END OF PROGRAM *************************************

Redirect to another page and set the error or success message from process

I have a process that runs when a page is submitted. In the process I am catching an exception and if an exception occurs I want to redirect to a different page and display the error message of the exception. How can this be done?
Below is my code. The redirect works but I want to set an error message to display on page 765 which is a different page to the one with this process on.
begin
-- some code here
exception when others then
owa_util.redirect_url('f?p=&APP_ID.:765:&SESSION.::NO:::');
end;

>
Please update your forum profile with a real handle instead of "973239".
I have a process that runs when a page is submitted. In the process I am catching an exception and if an exception occurs I want to redirect to a different page and display the error message of the exception. How can this be done?
Below is my code. The redirect works but I want to set an error message to display on page 765 which is a different page to the one with this process on.
begin
-- some code here
exception when others then
owa_util.redirect_url('f?p=&APP_ID.:765:&SESSION.::NO:::');
end;
Use the <tt>f</tt> function's <tt>notification_msg</tt> parameter to pass the error message in the URL:
owa_util.redirect_url('f?p=&APP_ID.:765:&SESSION.::NO:::&notification_msg=' || apex_util.url_encode(l_error_msg));
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)

How to display the username and current date in OAF page Footer region

Hi,
I need to display the username and Current-Date in footer region.If anybody knows the procedure then please share with me.
Thanks
Divya Agarwal

Hi,
Read this Thread:--
You have to capture the UserName and Date in the Process Request Method of page Controller and invoke a method which will subsequently get and set the value in some attribute.
String userName = pageContext.getUserName();
How to populate Current Date and Time in OAF page through CO
Thanks
--Anil

Camileo S20 - How to display the date and time

Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

Hi,
of course, I did it repeatly, it is written in my question above. I am not stupid.
This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

How to display the error message on screen in display mode

Hi all,
How to display error message as as status message on the screen(module pool).
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it lives the current transaction.
Thank you!
Prasad

Hi,
Try as below.
MESSAGE IXXX DISPLAY LIKE 'E'.
LEAVE TO SCREEN XXXX.
After displaying the information message like E, leave to the screen you want to navigate or can also navigate to the transaction required.
Regards,
Nangunoori.

How to validate the fields and how to display the error messagein presenta

Hi,
I am new to OBPM 10g, pls tell me how to validate the fields in a presentation.
for example if we take login presentation if user enters his user name and password wrongle and submit the form. Then we need to display error message right side of the each field i.e user name and passowrd is wrong and try again.
Regards
jaya
Edited by: 12345 on Aug 12, 2010 10:38 PM

Hi Jaya,
You can initially set the validation for empty values.. that is when the user dint enters any value and clicks on submit.
for these vadliations you need to write a method and call it on submit button click!!
secondly, you can validate for the format if required.
thirdly, you can validate against a database for the credentials. For this you need to fetch list of usernames from database and search for user entered value in that list.
Optimal query would be : if user name not null, query for pwd of the entered user name from database or file storage. if you dont get any value for pwd of given username, its incorrect user name. if you get some pwd value for username, then check against the one user entered in pwd field..
Write all this logic in a method and call on submit button click event of the login form!!
HTH
Sharma

How to display FRM Error and corresponding ORA error into alert

hello
I m able to catch FRM Error through ON-ERROR Trigger with help of ERROR_CODE
and ERROR_MESSAGE
Now i want to know how can i catch ORA error (If Exists )Corresponding to that FRM error .
Any help will be grately appricated.
Waiting for Reply......................................

hello
i tried following code but it will not display alert..............
i write following code into .pll file and i called this function on ON_ERROR trigger
but it will not display alert
declare
errcode NUMBER := ERROR_CODE;
     dbmserrcode NUMBER;
     dbmserrtext VARCHAR2(200);
     begin
     IF errcode = 40508 THEN
                         /* ** Form Builder had a problem INSERTing, so
                         ** look at the Database error which
                         ** caused the problem.
                         dbmserrcode := DBMS_ERROR_CODE;
                         dbmserrtext := DBMS_ERROR_TEXT;
                         IF dbmserrcode = -1401 THEN
                         ** ORA-01438 is "value too large for column"
                              g_fun.MSGBOX('Your number is too large. Try again.');
                         ELSIF dbmserrcode = -1400 THEN
                              ** ORA-01400 is "Mandatory column is NULL"
                              g_fun.MSGBOX('You forgot to provide a value. Try again.');
                         ELSE
                              ** Printout a generic message with the database
                              ** error string in it.
                              g_fun.MSGBOX('Insert failed because of '||dbmserrtext);
                         END IF;
     END IF;

How to display the Quantity and Rate fields in PO Report

I am trying to get a Purchase Order report that has the following fields in it.
1. Ordering Date
2. Purchase Order ID
3. Supplier
4. Product
5 Quantity
6. Rate
7. Amount (Quantity x Amount)
The reports under the Purchase Order WoC do not display Quantity and Rate.
Any more information like pointing to an Article or Help Topic is appreciated.
Regards
Yagyesh

Try the Purchase Order Volume report as your starting point.
I got everything you need onto that report in about two minutes (except quantity which may take longer).
The report can be found under the reports menu or you can find it under Business Analytics WoC if you have access.
I have been using the Business Analytics WoC for all of my reporting since it saves me the step of going to each WoC to look for the core reports.
Jim

How to get the Row and Column values in ALV (without using Objects)

Hi All,
I need to get the Row / Column when double click is used in ALV, I can use the double click event for this. However, I do not want to use the Object Oriented ALV. I want to implement the same functionality using general (using functions) ALV.
Is there any way to get the row / column values for a Generia (non-OOPs) ALV report.
Please help.
Thanks,
Vishal.

Hello,
The only think you have to do is to get the index where the user clicked, and then read the internal table you sent to the alv
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = 'prg_name'
      i_callback_pf_status_set = 'SET_PF_STATUS'
      i_callback_user_command = 'USER_COMMAND' " this is to the click event!!
      i_callback_top_of_page   = 'TOP_OF_PAGE'
      is_layout                = alv_layout
      it_fieldcat              = alv_fieldcat
      i_save                   = 'A'
      it_events                = alv_events[]
    TABLES
      t_outtab                 = i_totmez. ---> TOUR IT.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
" then....
FORM user_commandUSING r_ucomm     TYPE sy-ucomm
                                ls_selfield TYPE slis_selfield.
" r_ucomm -> HAS THE STATUS
" ls_selfield-tabindex -> HAS THE SELECTED INDEX
" THEN READ THE INTERNAL TABLE
" HERE YOU WILL HAVE THE SELECTED ROW
READ TABLE i_totmez INDEX ls_selfield-tabindex.
ENDFORM.
cheers,
Gabriel P.

How to display the fields using field catelog in ALV Report

Hi,
I have rquiremrnt in ALV report.I would need to add the new fileld in the ALV output screen.I have added the field but its appearing in the layout set but not directly displaying in the output screen.
I have written the below logic for field catelog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname   = 'LOGGR'.
wa_fieldcatalog-ref_tabname = 'MARC'.
wa_fieldcatalog-col_pos     = l_pos.
wa_fieldcatalog-outputlen   = 13.
   wa_fieldcatalog-seltext_s   = 'Log. group'.
wa_fieldcatalog-seltext_m   = 'Logistics group'.
wa_fieldcatalog-seltext_l   = 'Log. handling group'.
   wa_fieldcatalog-reptext_ddic = 'Log. handling group'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
l_pos = l_pos + 1.
Please let me know why the added field was not displaying automaticaly in the output screen.
Regards,
Reddy

hi,
         try this
clear wa_fieldcatalog.
wa_fieldcat-tabname       = 'ITAB' ( give the internal table which has the field LOGGR)
wa_fieldcatalog-fieldname = 'LOGGR'.
wa_fieldcatalog-ref_tabname = 'MARC'.
wa_fieldcatalog-col_pos = l_pos.
wa_fieldcatalog-outputlen = 13.
wa_fieldcatalog-seltext_s = 'Log. group'.
wa_fieldcatalog-seltext_m = 'Logistics group'.
wa_fieldcatalog-seltext_l = 'Log. handling group'.
wa_fieldcatalog-reptext_ddic = 'Log. handling group'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
l_pos = l_pos + 1.

How to display the eror message in the iView

Hi
I want to check the user input in the client side and display an error message in the iView instead of displaying the error message as an alert
it is ok when I tried to do it as an alert
alert('ERROR MESSAGE');
but the problem is how to display the error message as a text in the iView ...
I wrote the below code..
any one can see it and has any sugestion?
Thanks
=============
<%@ taglib uri="tagLib" prefix="hbj" %>
<%
String compid = "";
String message = "";
%>
<hbj:content id="MyContent">
<hbj:page title = "Selection Screen">
<hbj:form id = "myForm">
<br>
<br>
<br>
<center>
<H3>Benefits Statement </H3>
<H4>Selection Screen</H4>
<hbj:gridLayout
id="FSSLayout"
debugMode="False"
width="40%"
cellSpacing="5"
>
<hbj:gridLayoutCell
rowIndex="1"
columnIndex="1"
width="10%"
horizontalAlignment="LEFT"
style="WildStyle"
>
<hbj:label
id="label_inputPernr"
required="TRUE"
text="Personal Number:"
design="LABEL"
labelFor="inputPernr"
/>
</hbj:gridLayoutCell>
<hbj:gridLayoutCell
rowIndex="1"
columnIndex="2"
width="40%"
horizontalAlignment="LEFT"
>
<hbj:inputField id = "inputPernr"
>
<%
compid=MyContent.getParamIdForComponent(inputPernr);
%>
</hbj:inputField>
</hbj:gridLayoutCell>
<hbj:gridLayoutCell
rowIndex="10"
columnIndex="1"
width="40%"
horizontalAlignment="CENTER"
colSpan="2"
>
<hbj:button id = "myButton" text="Submit.." design="EMPHASIZED"
tooltip="Click me to submit this form" onClick="ClickEvent" onClientClick="validRequired()">
</hbj:button>
</hbj:gridLayoutCell>
</hbj:gridLayout>
</center>
<p font="Arial" size=20><%= message%></p>
</hbj:form>
<SCRIPT LANGUAGE="Javascript">
function validRequired()
var myvar = document.getElementById('<%=compid%>').value;
var ivID='<%=componentRequest.getComponentContext().getContextName()%>';
if (myvar = " ")
message = "Enter Employee Number";
ivuRefresh(ivID);
htmlbevent.cancelSubmit=true;
</SCRIPT>
</hbj:page>
</hbj:content>

No problem, here is an example of some html code and javascript that you can adapt to your needs. You can display this standalone to see how it works.
I hope this helps
<html>
     <head>
          <script language="JavaScript">
               function validateForm(){
                    if(document.getElementById("nameField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the Name";
                    else if(document.getElementById("ageField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the Age";
                    else if(document.getElementById("idField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the id";
                    else
                         document.getElementById("errormessage").innerHTML = "";
          </script>
     </head>
     <body>
          <table border="0" cellpadding="0" cellspacing="0">
               <tr>
                 <td>Name</td>
                 <td><input type="input" id="nameField" name="nameField"></td>
               </tr>
               <tr>
                 <td>Age</td>
                 <td><input type="input" id="ageField" name="ageField"></td>
               </tr>
               <tr>
                 <td>Id</td>
                 <td><input type="input" id="idField" name="idField"></td>
               </tr>
               <tr><td><font color="red"><span id="errormessage"></span></font></td></tr>
               <tr><td><input type="button" name="validate" onClick="validateForm()" value="Click to validate"/></td></tr>
          </table>
     </body>
</html>

How do I get the erase and sync message?

I want to sync a new library from my iTunes into my iPhone 4 but I accidently clicked not to erase and sync, so now I want to know how to get the message of erase and sync to come back up.
Does anyone know how to get the erase and sync message?
Tons of points and virtual cookies if you can answer!
Thanks!

It should be provided again when re-selecting sync.

How to display the error and success message in ALV

Similar Messages

Maybe you are looking for