How do I prevent multiple applications opening on start up with Lion?

how do I prevent multiple applications opening on start up with Lion?

It's the Resume feature of Lion:
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.

Similar Messages

I often launch Firefox from the command line or LaunchBar. How do I prevent Firefox from opening a new window with my homepage along with a separate window with the location I intended to open?

Macbook Pro i7 17"

It's a bug on Mac.
[https://bugzilla.mozilla.org/show_bug.cgi?id=531552 Bug 531552] - Firefox 3.6b opens two windows when opening external links
(please do not comment in bug reports)

How can we handle multiple applications in session method

how can we handle multiple applications in .. session method.
can any body reply me.
thanks

Hari,
hi Check out this sample code to use session method
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
                Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
         Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
         Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
       TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
         End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
    Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
    FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
    HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
    Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
      FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
      Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
IMPORTING
   QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
      fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
    POST_LOCAL             = NOVBLOCAL
    PRINTING               = NOPRINT
    SIMUBATCH              = ' '
    CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
      Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
      Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
      To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop
Don't forget to reward if useful..

Working with multiple applications open

I was wondering if having multiple applications open has a negative effect on the speed of my RAM. Someone told me that it's actually a good thing to have more than one open at a time in OS X. Could that be true?
I'm interested because I only have 256 MB and I use Photoshop CS (a real memory hog) a lot for manipulating big images. I'm also online pretty much all the time.
Thank you.
Allan

Yeah, I think I see those beach balls in my sleep! Thanks Littleshoulders for the link. It's really helpful. I think I'll buy that ebook when I can. The other link on my previous post that led somewhere on this site helped a lot, too. The more I learn, the better.
So I guess that's a fallacy that it's good to have many apps open at a time, especially Photoshop and the huge images I work with. You know, I'm sure I read that in a book about using OS X. I don't see how there would be a benefit to have multiple apps open.
I think RAM will be my next purchase, followed, of course, by a newer, more powerful Mac.

How do I prevent iTunes from opening when I pug in my iPod?

How do i prevent tunes from opening when i plug in my ipod?

This will occur when there are photos and/or videos in the Camera Roll, which should be imported by your computer as with any other digital camera.
Depending on the iPhoto version you are running, this can be done via iPhoto preferences > connected camera opens > select no application.

Can i have multiple applications open on one page

can i have multiple applications open on one page?

JShimazaki wrote:
Mac OS X Mountain Lion supports multitasking like cbs20 mentioned. Just like MS Windows just press alt+tab to switch to whatever applications you have open.
Actually it isn't Alt-Tab on OS X, it's Command-Tab to use the Application Switcher.
Also, Control+ left/right arrow key will switch spaces if that's what's desired.

How can i prevent deleted application download on my iTune Store?

Hi,
i downloaded few application and deleted in my iPhone 4 (before connect iTune store) but whenever i connect my iPhone in iTune store deleted applications start downloading every time so how can i prevent deleted application download on my iTune Store? please suggest me,
Thanks in Advance,
Suresh Balakrishnan.

Welcome to the Apple community.
It sounds as though you are sharing and iCloud account with someone else, you need to have a separate iCloud account, otherwise there is no way of stopping other sharers from accessing your photos in photo stream.

How do you make an application open on a specific monitor?

How do you make an application open on a specific monitor? I have two monitors, and I was able to get Firefox to open on the secondary display always by resizing it with the option or command key [I forget which one] and then quitting it. Now everytime I start it, it opens on the second monitor.
However, when I try to do the same with QuickTime [when playing videos], it always opens on the primary display no matter what I do with it. How do I make it always open on the secondary display?
Thanks in advance for any help!

Thanks for the suggestion, but no, Spaces is not what I want. I have two physical monitors, and simply want an application to always open on one monitor, not be able to switch back and forth between different desktops.

How do I keep multiple windows open and switch back and forth?

How do I keep multiple windows open and switch back and forth?

billyg27,
if you hold down a Command key and press the Tab key, it will show a set of icons representing your currently opened programs. Press Tab until you arrive at the program you’d like to switch to, and then release the Command key.

How do I prevent Mail from opening when I click an email address in Safari?

My wife and I both use Yahoo! Mail. Neither of us uses the Mail app to manage our email. How do I prevent Mail from opening when we click an email address in Safari? Is it possible to direct Safari to open a separate web browser prompting us to log in to our Yahoo! Mail?

Hmm.. probably not.
You want to open Mail. Then go into Preferences > General and you will see something similar to this:
In the area marked Default Mail reader click on the pull down and at the bottom of the list it will say Other. You can see if you can select Safari here and if that will open up Safari.
Good luck.

Re: How do I keep an application from being started morethan once?

Here are some quick ideas. None of them should be too hard to implement,
although each has some drawbacks.
1. Have a login server track who is logged on, and if there is already a
logon for a given user or a given machine, then deny the application
startup. The nice thing about this is that a user will not be able to have
multiple logins even by going to another machine. Then again, this may not
be so nice, and you also get a possible single point of failure on the
login server for which you will have to prepare.
2. Drop to the operating system, and get a list of processes for the client
machine. If the name of one of them matches the name of application that
is being run, then deny startup. This avoids a network hit, but requires
some OS specific code. Also, a clever user could change the name of an
executable to get around this. Note that a user could have another login
on another machine.
3. Write to a file on the local machine. You can hide the file in some
suitable place, and can also scramble some information so that a user
cannot get around having this file present by reading from the file at
startup and then writing to it. Based on the state of your application,
the file will have some scrambled information indicating if an instance of
an application can be started. If you retain the write lock (i.e. do not
close) the file for the duration of the application, you increase your
security at the risk of a confused user if the application gets terminated
without releasing the lock. Depending on the OS where the client will run,
this could be an issue. If you like this option, perform some experiments
first on all configurations of an example client machine to determine the
behavior. Again, this only works to prevent an extra login on a single
machine, not system wide.
If you are not concerned about your users hacking around too much and don't
care about a login on another machine, I would opt for some version of
number 3. Otherwise, I would venture number 1.
Regards
CSB
At 07:47 AM 2/18/98 -0500, Martin G Nystrom wrote:
A user can launch an application, then launch it again. How do we make it so
that the user can only run one instance of the application?
Martin Nystrom
Eli Lilly and Company
([email protected])
Curtis Bragdon, Senior Consultant, Forte Software
[email protected]
Voice Mail: (510) 986-3807
Paging: (888) 687-6723
"I've seen dozens of triggering towns." - Richard Hugo

Yet another quick and dirty solution is to use local ExternalConnections.
This is a single instance per machine solution.
Example is attached.
(See attached file: TestOne.pex)
[email protected] on 02/18/98 10:01:07 PM
Please respond to [email protected]
To: [email protected]
cc: [email protected]
Subject: Re: How do I keep an application from being started more than
once?
Martin,
there are two ways to read your question
(a) no more than one instance of an application per machine
(b) no more than one instance of an application per "user"
now if a user has only one machine, and your system has "userids" and you
only want
one active "session" per "user" then the distinction is irrelevant.
However, many systems
let people share logins, so a token based thing enforcing one login will be
problematic.
The downside of #1 approach suggested by Curtis happens when a machine gets
hosed without "logging" the user off the security system, then they can't
get in until their ticket expires or a sysadmin gets involved. Should be
manageable, however. But this enforces one application
instance per user, unless you check both for the presence of an active
token for that user as well as the presence of a token tied to that
particular node name. Otherwise there is nothing to prevent the same user
from launching the app again and logging in as a different user. This is
definitely the best approach of the bunch, and can be adapted for either
(a) or (b).
Suggestion # 2 won't work unless the application is built as a compiled
client,
since the process name will be 'ftexec' and not the "name" of the
application. And it doesn't
prevent a user from launching the app from a different machine (or people
sharing logins). So again it depends on what you are trying to achieve.
#3 also only prevents multiple instances per machine, not necessarily by
user. Of course
most people don't have multiple machines. The point is that you may be
trying to
prevent your users from sharing logins. In which case the file thing won't
do it.
Some other ideas:
1. You could, however, enforce one application per machine using the
installed partition agent's ExecutingPartition instrument name. As long as
the user doesn't run the app in a different environment, you can have the
app check at startup time if there is another
ActivePartition running under the same InstalledPartition name.
(ActivePartitions are child agents
of InstalledPartitions).
2. use the ObjectLocationManager and bind a simple object into the naming
system using a naming scheme such as
/MyApplication/MyNode or
/MyApplication/MyUserId
the presence of either one would indicate that another instance of that
application is running on either that machine or that user. Of course
these have to be cleaned out, and subject to similar downside as
alternative #1. So you'd essentially be using the forte naming system as a
distributed lock manager (ouch).
3. Have the application remove the shortcut to launch it upon startup, and
recreate it when it is finished, or move it to a hidden place. There it
is - the worst idea I've ever come up with. Don't
do this!
Regards,
John
From: Curtis Bragdon <[email protected]>
Date: Wed, 18 Feb 1998 16:36:58 -0500
Subject: Re: How do I keep an application from being started more than
once?
Here are some quick ideas. None of them should be too hard to implement,
although each has some drawbacks.
1. Have a login server track who is logged on, and if there is already a
logon for a given user or a given machine, then deny the application
startup. The nice thing about this is that a user will not be able to have
multiple logins even by going to another machine. Then again, this may not
be so nice, and you also get a possible single point of failure on the
login server for which you will have to prepare.
2. Drop to the operating system, and get a list of processes for the client
machine. If the name of one of them matches the name of application that
is being run, then deny startup. This avoids a network hit, but requires
some OS specific code. Also, a clever user could change the name of an
executable to get around this. Note that a user could have another login
on another machine.
3. Write to a file on the local machine. You can hide the file in some
suitable place, and can also scramble some information so that a user
cannot get around having this file present by reading from the file at
startup and then writing to it. Based on the state of your application,
the file will have some scrambled information indicating if an instance of
an application can be started. If you retain the write lock (i.e. do not
close) the file for the duration of the application, you increase your
security at the risk of a confused user if the application gets terminated
without releasing the lock. Depending on the OS where the client will run,
this could be an issue. If you like this option, perform some experiments
first on all configurations of an example client machine to determine the
behavior. Again, this only works to prevent an extra login on a single
machine, not system wide.
If you are not concerned about your users hacking around too much and don't
care about a login on another machine, I would opt for some version of
number 3. Otherwise, I would venture number 1.
Regards
CSB
At 07:47 AM 2/18/98 -0500, Martin G Nystrom wrote:
A user can launch an application, then launch it again. How do we make itso
that the user can only run one instance of the application?
Martin Nystrom
Eli Lilly and Company
([email protected])
Curtis Bragdon, Senior Consultant, Forte Software
[email protected]
Voice Mail: (510) 986-3807
Paging: (888) 687-6723
"I've seen dozens of triggering towns." - Richard Hugo
John Jamison
Vice President of Technology
Sage IT Partners, Inc.
415 392 7243 x 306
[email protected]

How do you change what programs open on starting up?

How do you change what programs open on start up?

By changing the list of login items for your user account in System Preferences, and if Lion is automatically reopening applications, which ones are running when the computer is shut down.
(64981)

Can PowerPC applications be converted for use with Lion OSX? If so, how?

Can PowerPC applications be converted for use with Lion OSX? Ifso, how?

Three workarounds:
1. If your Mac supports it, partition your internal hard drive or use an external drive and install Snow Leopard. Then you can "dual-boot" into Snow Leopard when you want to run your PowerPC applications.
2. Upgrade and/or find alternative replacements for your PPC software that run without Rosetta.
3. Install Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on images to enlarge]
Or in Mountain Lion:
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439

I have 3 macs. 2 are Lion, 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....

How do I install Front Row for my MacBook Air with Lion OS

I need to know how to simply install Front Row onto my MacBook Air with Lion OX 10.7.4. Please help.

Front Row is indeed "gone." There are alternatives, but first look at these links:
How to Install Front Row on Mac OS X Lion 10.7
Front Row Enabler for Lion - Mac-Hatter Consulting, LLC.
Get Front Row for Mac OS X 10.7 Lion
Plex - A Complete Media Solution

How do I prevent multiple applications opening on start up with Lion?

Similar Messages

Maybe you are looking for