How do I preview in different browsers inside of edge?

By default I'm previewing in explorer and I don't see an option to preview in Chrome or Firefox.
Thank you!

Hi there,
Short answer is there's no such feature in Edge Animate yet.
EA does a preview in browser using the system default browser. You could install developer tools in your default browser that would allow you to open the current page (the one you're previewing) in another browser, or copy/paste the url into another browser - or wait for such a feature to appear in Edge Animate.
Joe

Similar Messages

How do I make my animation look the same in different browsers?

Hi!
When I play my animation in different browsers it don't look the same as in the preview. In IE some of the parts of the animation have disappeared and in Chrome the pats are no longer in their right places. See picture below.
How do I do to make the animations look the same in different browsers?
(In the end I want to use the animations in my captivate 8 project. )
BR,
M

Ah, found the issue, the problem is with the name of the two images,
genomförande (instead you can use genomforande)
Grå bakgrund (instead you can use grabakgrund)
Seems like IE is having issue with those special characters.
hth,
Vivekuma

My pdf title is different in different browsers how to make it same ?

The pdf file which is on my site when opened in different browsers shows different title. how to make it same in all browsers ? Like in mozilla it shows file name like abc.pdf as title but in chrome it shows URL of the page as title and in IE it shows the domain of the page as title ?

Are you using the same viewer in all 3 browsers?
Firefox's built-in PDF viewer will extract one of the PDF document properties if available and show that along with the file name. At least that's what was happening in this thread: [https://support.mozilla.org/questions/965816 PDF preview creates bad title for page].
You can try switching between the built-in viewer and the Adobe Acrobat viewer as described in this article to see whether that makes a difference: [[How to disable the built-in PDF viewer and use another viewer]].
But, as for how to make different viewers consistent, hmm..., I'm not sure you can.

How to underline with a different color than red (in Preview, with Mountain Lion)

Hi,
I'm using Preview to study and I would like to figure out how to underline with a different color please...
Also, Is there a better app to read PDF document and highlight/annote/underline... to study...
Thanks!

In Adobe Acrobat Reader, you can control the color of the underline and the highlight from the Annotations panel. You would bring this into view from the View > Comment > Annotations menu hierarchy. The underline tool by default, has a green underline. You can change the color (and opacity) by right-clicking the green underlined ‘T’ and choose “Tool Default Properties.”
This may have answered your second question if you find it easier to perform your markup with it.

How do you print multiple different images on a single page in preview

How do you print multiple different images on a single page in preview?

Chances are no one who saw your question knew the answer.
Unless you're willing to share the answer you found here, then anyone else like you searching for the problem who comes across this thread will also be unable to thank you for providing the answer too.

I have tried downloading and installing the Adobe Pro DC trial on 2 different browsers and it keeps generating an "unexpected error". I have a MAC. How is this troubleshooted and fixed?

I have tried downloading and installing the Adobe Pro DC trial on 2 different browsers and it keeps generating an "unexpected error". I have a MAC. How is this troubleshooted and fixed?

Hi Carlos ,
Could you please share the screen shot of the error message so that we can check and troubleshoot accordingly .
Is there any error number or code associated with the error message or it just says "unexpected error" ?
I would recommend you to try and install the Acrobat DC trial referring the following links .You could choose any of the following .Also make sure you disable all the third party software before you commence the installation .
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
https://helpx.adobe.com/acrobat/kb/acrobat-dc-downloads.html
Regards
Sukrit Dhingra

How come my links layout go all over the place in different browsers?

Hello,
Please go to <http://www.peterdanko.com/errr.png> and see the screen shot of the page I am having difficulty with in the design view. Note the links: INSTALLATIONS, BELT COLORS, FINISHING, PRICING are neatly centered with the text body above and in a single line.
Now view <http://www.peterdanko.com/atmos.html> Note they are now stacked and randomly placed. In different browsers they are all over the place.
How can I keep them neat and tidy in all browsers?
Thanks
PETER

Below is the complete html code/css re-written for the 'product-wrapper' section. (scroll down). Not sure if this is of help or not. I think you need to take some time to learn some more html/css as the way youre going about it at the moment must be a complete nightmare for you. Copy the code below, (scroll down) paste into a new Dreamweaver document and save to your site folder. View in browser.
You need to simplify your way of working instead of creating a <div> for each of your page elements, which must be a headache to keep track of???
Example: Instead of putting your header 'Atmos Seating Group' in it's own individual <div> use a more meaningfull html tag like a header tag, <h2>Atmos Seating Group</h2>
Then use some css to target the <h2>. We know the <h2> tag is in the 'right_tx_bx_400pxWd' <div> so write it as below:
right_tx_bx_400pxWd h2 {
text-align: center;
margin: 15px 0;
font-size: 20px;
font-weight: normal;
color: #999;
Similarly instead of inserting the main wording in its own <div> use a paragraph tag, <p></p> it's more meaningful. Then target the paragraph tag:
#right_tx_bx_400pxWd p {
font-size: 13px;
line-height: 16px;
color: #999;
Get the point. We only have to keep track of one <div> not several and we can target tags in that <div> more cleanly and effectively.
Try and keep all off your css together i.e. so all the 'right_tx_bx_400pxWd' css is kept together so its easy to find in the stylesheet intead of scrolling up and down.
Don't use heights on <divs> unless you know how high it will be and you won't know that unless it just contains images or you set a specific height for a scroll bar.
BELOW IS THE CODE:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">
#product_wrapper {
width: 932px;
margin: 0 auto;
overflow: hidden;
#left_image_column {
float: left;
width: 512px;
#right_tx_bx_400pxWd {
float: left;
width: 400px;
font-family: Arial, Helvetica, sans-serif;
margin-left: 20px;
display: inline;
#right_tx_bx_400pxWd h2 {
text-align: center;
margin: 15px 0;
font-size: 20px;
font-weight: normal;
color: #999;
#right_tx_bx_400pxWd p {
font-size: 13px;
line-height: 16px;
color: #999;
#right_tx_bx_400pxWd h3 {
text-align: center;
margin: 15px 0 10px 0;
padding: 0;
font-size: 14px;
font-weight: normal;
color: #999;
#right_tx_bx_400pxWd ul {
margin: 0;
padding: 0;
text-align: center;
#right_tx_bx_400pxWd li {
text-align: center;
font-size: 13px;
margin: 0 0 3px 0;
font-style: italic;
color: #CCC;
/* footer links */
#four_text_link_box {
clear: both;
width: 400px;
padding: 20px 0 0 0;
#four_text_link_box ul {
margin: 0;
padding: 0;
#four_text_link_box li {
margin: 0;
padding: 0;
float: left;
list-style: none;
text-align: center;
#right_tx_bx_400pxWd #four_text_link_box a {
float: left;
font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
color: #999;
text-decoration: underline;
display: block;
width: 100px;
text-align: center;
font-style: normal;
/* end footer links */
</style>
</head>
<body>
<div id="product_wrapper">
<div id="left_image_column"><img src="atmos_images/atmos_lounge_blk_belt.jpg" alt="Atmos lounge" name="at_lounge" width="512" height="400" id="at_lounge" /></div>
<div id="right_tx_bx_400pxWd">
<h2>Atmos Seating Group</h2>
<p>The Atmos chairs are the essence of OMG design. They are comfortable. They evolve the Shaker esthetic of spare/elegant utility into the eco-modernist sensibility: The straps are post industrially sourced automotive seat belt material, the “ears” at the top of the backs acknowledge our natural world, and though strong, its lightweight structure uses minimal material. The contrasting splines on the rocker and lounge chairs celebrate craftsmanship. Wood is American Ash sourced from FSC certified forests; adhesives and finishes are water based. Suitable for residential and designed for contract applications.</p>
<h3>OMG characteristics:</h3>
<ul>
<li>use of post-industrial belting as substitute for the more problematic use of foam as cushion material fabric</li>
<li>low carbon footprint.</li>
<li>ply-bent construction</li>
<li>evokes the enchantment of an eco centric style</li>
</ul>
<div id="four_text_link_box">
<ul>
<li><a href="at_installs.html">Installations</a></li>
<li><a href="#" onclick="MM_openBrWindow('images/belt_samples.gif','belts','scrollbar s=yes,resizable=yes,width=300,height=100')">Belt Colors</a></li>
<li><a href="#" onclick="MM_openBrWindow('images/wood_finishes.gif','finishes','scrol lbars=yes,resizable=yes,width=600,height=175')">Finishes</a></li>
<li><a href="#" onclick="MM_openBrWindow('_danko_2010pricelist/at_prices.gif','','scr ollbars=yes,resizable=yes,width=400,height=500')">Pricing</a></li>
</ul>
</div>
</div>
<div id="bottom_rule">
      <p> </p>
      <p> </p>
    </div>
    <div id="product_box"></div>
</div>
</body>
</html>.

How do I embed the different video formats that are required for different browsers?

I have a short video in the different formats required to play across different browsers but I can't seem to get the HTML 5 code correct. I can only get it to play in one browser at a time. It seems to only play in the browser that has the video code first. What should the code look like?

Yah the code goes just like that, the first line "var vid_html" declaires the variable. += just adds everything after it to what was already there. You've probably seen this with numbers before: some_number += 50; (will increment that number by 50 more than what it was previous to calling that)
Another way to write the above is like this:
var vid_html = '<video width="320" height="240" controls poster="video/v4b2.jpg">'+
                         '<source src="video/v4b.mp4" type="video/mp4">'+
                         '<source src="video/v4b.oggtheora.ogv" type="video/ogg">'+
                         '<source src="video/v4b.webmsd.webm" type="video/webm">'+
                         'Your browser does not support HTML5 video'+
                       '</video>';
It's just appending strings together to be a little more readable. And I removed your reference to "var vid=sym.$("holder");" because you're only calling "vid" to set the html text.

Text in tables shifting in different browsers...

I have set up a page using tables.
In the middle of the page are 4 images pulled in and lined up
horizontally separated by table cells (for some space).
The tables immediately underneath the photos are for adding
text.
I center aligned the text and am controlling only the font
style (no colors, sizes, etc) from a separate external CSS file.
The first line of text is "paragraph" format, the second line
of text is bigger/different color and in "heading 1" format, the
third chunk of text is "paragraph" format also (it's an actual
paragraph).
When I view this page in the 4 main web browsers, this text
shifts up and down. In other words, all 4 photos underneath
descriptions are not aligned nicely horizontally. The tables are
perfectly aligned, so why is the text moving vertically inside when
previewed?
Here's a link to my site:
http://student.ccbcmd.edu/~rsmit459/playingthedrums/index.html
View it in different browsers and watch the copy under the
photos shift vertically (not lined up across the page).

*bump*

Design, Preview, and Browser Preview are different

I made a very simple desig. Master page header has logo and two rectangles: opacity 70% and white.
Why appearence in design, preview, and browser are different? Am I missing some settings?

Hi Lucky,
Muse preview is the closest approximation of how your site would look in different browsers. It is advisable to always preview the site in a browser before finalizing the design.
Regards,
Aish

Issue with images in different browsers

Having an issue with different browsers -- hoped someone
could help.
If I open my site with IE, everything looks as it does in
Dreamweaver -- there is no overlap of text and images/etc.
If I open my site with Mozilla or Safari, it seems to
arbitrarily move up some of the images over the top of text. Not
all of the images, mind you -- just a few random ones throughout
the page.
Opening the following link in both type of browsers may give
you a clue as to what is going on. What can I do to get it to look
like it does in IE?
http://www.centecsystems.com/centecexample/disanapplications.htm

LOL ahem, 'scuze me. :-)
-N
"Walt F. Schaefer" <[email protected]> wrote in
message
news:[email protected]...
> >>For that we rely on IE hacks
>
> In polite company we call those "conditional comments".
> --
>
> Walt
>
>
> "Nancy O" <[email protected]> wrote in
message
> news:[email protected]...
> > First off, you are assuming incorrectly that IE is
the good browser and
> > Mozilla is the bad browser. Actually, it's the
other way around. If
you
> > build your sites to perform well in Mozilla,
chances are your sites will
> > look good in all major browsers except IE. For that
we rely on IE hacks
> > or
> > workarounds.
> >
> > Learning html and CSS takes time and effort but
it's very doable. You
> > would
> > be doing yourself a big favor by learning to work
with code now. Design
> > view is fine for some things, like typing content
and adding a few
images.
> > But eventually you have to pop the hood to check
the oil. If hiring a
pro
> > isn't an option, I suggest you purchase a solid
template to work with.
> > Money well-spent IMHO.
> >
http://www.projectseven.com/products/templates/
> >
> >
> >
> > --Nancy O.
> > Alt-Web Design & Publishing
> > www.alt-web.com
> >
> >
> >
> >
> > "PunIntended" <[email protected]>
wrote in message
> > news:[email protected]...
> >> Unfortunately, hiring someone is not an option
for my friend -- the
> > recession
> >> has hit them hard -- etc.etc. I'm doing it as a
favor.
> >>
> >> One additional question -- Why are only some of
the image files moved
> > when
> >> viewing in mozilla? I dont understand how
Dreamweaver arbitrarily
> >> chooses
> >> which are moved and which are not.
> >>
> >> Also, is laying out your site in 'design' mode
simply a bad idea? It
> > seems
> >> like it looks / works fine with IE, and the
majority of the layers are
> > correct
> >> in mozilla -- it just doesn't deal well with a
few of the images.
> >>
> >> Thank you again for all your comments - - like
I said, am sort of a
> > beginner
> >> -- just looking for the best method to fix the
problem. If the best
> > method is
> >> explaing to the graphic designers their
'vision' can't be accomplished,
> >> so
> > be
> >> it. I just want to know how to go about
attacking the browser
> > compatibility.
> >>
> >
> >
>
>

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How to go to a different Transaction from a Transaction iview

Hi Experts,
I have one question and I need you help regarding this.
1 . How to go to a different R3 transaction from an existing R3-Transaction iview in portal.
     Lets assume I have one iview which points to tcode : MIRO(R3 transaction)
     Now the end user wants to go to a different transaction(for example : FB60) from this iview.
      He wants to navigate to different transaction from inside portal only and not from ECC.
Thanks a lot in advance.

Dont you want the user to enter this transaction in the command field after entering MIRO and let them work ike we work in R/3?
or make a transaction iview with transaction "SESSION_MANAGER" which will take the user to SAP initial screen and probably there user can go to any transaction to which he is authorized to.
Regards
Puneet

HT2493 How to change preview image of a file and NOT the icon ?

Hello dear Mac users
How to change preview image of a file and NOT the icon ?
I know how to change the icon of a file, but I wish to know how to change the preview of any file.
For example: my file is "mysong.aif", I changed the icon to be "mylogo.png" using cmd+i, cmd+v on the icon. But the preview of the file still remain the same.
I know it can be changed using iTunes, but I don't want to import all my files in iTune, and iTune cannot import all type of files.
I hope someone will understand my needs...
Thanks!

Thanks BeerbarX
You can't change the preview image for anything
hoo
QuickLook plugin
what are the plugin ?
In the case of a music file, it will be that generic black box with a note on it
That is exactly what I'm asking about !
MP3 which has a special tagging standard that can include artwork
How can I "tag" my MP3 without going thru iTunes ? Is it possible to do it dirrectly in the Finder ? Is there other type of files that can include such tags ?
Thank you for answering my question , wich I have to admit may seem useless, but I wish I could put something like a signature logo on each of the different file I produce (as AIF for music and MP4 for video clip) instead of that generic black box with a note on it, and by the meantime keeping a different icon for all of them in order to illustrate theire content.

Trouble seeing my website in different browsers

How can I set my iWeb site looks right in different browsers? I can't find a great solution for that. I prefer the "liquid" or "fluid" layout. If it is possible. Thanks

Welcome to the Apple Discussions. Paste the URL of your site into this site Browsershots and select the browsers that you'd like to see how the render the site. They are static views of how the site will be rendered but will give you a good idea. Don't know what you mean by liquid/fluid. Does that mean not-static?
OT

How do I preview in different browsers inside of edge?

Similar Messages

Maybe you are looking for