How do I process updates in Service Station

My previous message did not show so am repeating.
I am asked in Service Station to press a Download button for a CyberLink Power DVD update but there is no such button.
Another update says press the Download/Install button but I would like more info before using the Install button. Is that meaning press download first then install or press either button if one exists?
Am I correct in presuming the references to Download, Download/Install all mean press Install?
If so how do I learn more info about the updates in Service Station before installing?

Windows 8.1 Toshiba service station has the buttons you specified, yes the install button means download and install.
I updated the CyberLink Power DVD using the Toshiba service station, click install and it showed download progress then asked permission to extract and install.
The Toshiba service station will show bios updates also, verify by going to your support page to see if that new version is available for you model. I have updated the bios using the service station without any problems except this time, the picture below shows a bios update that is not on my support page and when I tried to install it an error came up saying this update is not for my computer. So apparently it can make mistakes. Verify first, and you can download and install manually if you want to.
see below:
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Similar Messages

Trouble installing update in Service Station.

I've been trying to install the Atheros Wireless Lan Driver Version 10.0.0.263 Released 9/29/13; 37MB. Now I didn't even purchase my Satellite C55 A5172 until 5-4-2014. Wouldn't have more recent updates installed on it? And if I need this update how do I get it to install? Everytime I try it will go over and try to install the file then flip to my Authorize Permission box. I anwer yes it will then just go back to the original install page in Service Station. Someone please help me with this? First do I need it? Then if so, how do I get it to install? This is what it says about installing it.
Toshiba recommends installing this component that has been updated to support Windows 8.1

I assume you have Windows 8.1 64 bit. If so, the driver you mention is the latest driver available. However, if your WiFi is working OK, you can safely ignore it. If you prefer to install it, HERE it is direct from the Toshiba download site. Forget Service Station, download and install it from my link.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

How to invoke processes viw Web Services

I am trying to test out how we can create/call processes from external programs via Web Services.
I have gone into Studio, I have created a Process called "Customer Call" in a "Process/Customer" Folder which has an id of "CustomerCall". Then I have gone to Process->Process Web Service from the Menu, and added an operation called "customerCall" set to "Process Creation" and Argument Set of "BeginIn". I have then Saved, Checked, Published and Deployed the Process. Then Launched the Workspace and have tested the process works in Hiper Workspace.
However I am unable to access the Process via a WSDL as the documentation suggests.
Following the documentation if I try
http://localhost:9000/fuegoServices/ws/Customer%20CallServiceListener?WSDL
any of the following, as suggested I get a page back with the following text, "HTTP/1.0 500 INTERNAL SERVER ERROR".
For fun I have also tried the following
http://localhost:9000/fuegoServices/ws/CustomerCallServiceListener?WSDL
http://localhost:9000/fuegoServices/ws/Customer/Customer%20CallServiceListener?WSDL
http://localhost:9000/fuegoServices/ws/Customer/CustomerCallServiceListener?WSDL
All with the same result!
Interestingly if I try
http://localhost:9000/fuegoServices/ws
I get back a page that says, "Web Services".
Have found the following on dev2dev forums, which seems to hint at another method, but this fails also.
http://forums.bea.com/bea/message.jspa?messageID=600044292&tstart=60
The only WSDL I seem to be able to get back is
http://pc009068:8585/workspace/webservices/ProcessService?WSDL
Which brings back the WSDL attached
Hope you can help, or find someone as the documentation seems very confused and possible out of date!

The following Java client application shows how to use the JAX-RPC API to invoke the buy and sell operations of the deployed Trader Web Service.
example from bea online
The following snippet from the sample build.xml file contains instructions that will build the EAR file into a temporary build_dir directory:
<target name="build" >
<delete dir="build_dir" />
<mkdir dir="build_dir" />
<copy todir="build_dir" file="trader.jar"/>
<servicegen
destEar="build_dir/trader.ear"
warName="trader.war"
contextURI="webservice">
<service
ejbJar="build_dir/trader.jar"
targetNamespace="http://www.bea.com/examples/Trader"
serviceName="TraderService"
serviceURI="/TraderService"
generateTypes="True"
expandMethods="True" >
</service>
</servicegen>
</target>
The following Java client application shows how to use the JAX-RPC API to invoke the buy and sell operations of the deployed Trader Web Service:
package examples.webservices.complex.statelessSession;
public class Client {
public static void main(String[] args) throws Exception {
// Setup the global JAXM message factory
System.setProperty("javax.xml.soap.MessageFactory",
"weblogic.webservice.core.soap.MessageFactoryImpl");
// Setup the global JAX-RPC service factory
System.setProperty( "javax.xml.rpc.ServiceFactory",
"weblogic.webservice.core.rpc.ServiceFactoryImpl");
// Parse the argument list
Client client = new Client();
String wsdl = (args.length > 0? args[0] : null);
client.example(wsdl);
public void example(String wsdlURI) throws Exception {
TraderServicePort trader = null;
if (wsdlURI == null) {
trader = new TraderService_Impl().getTraderServicePort();
} else {
trader = new TraderService_Impl(wsdlURI).getTraderServicePort();
String [] stocks = {"BEAS", "MSFT", "AMZN", "HWP" };
// execute some buys
for (int i=0; i<stocks.length; i++) {
int shares = (i+1) * 100;
log("Buying "+shares+" shares of "+stocks[i]+".");
TradeResult result = trader.buy(stocks, shares);
log("Result traded "+result.getNumberTraded()
+" shares of "+result.getStockSymbol());
// execute some sells
for (int i=0; i<stocks.length; i++) {
int shares = (i+1) * 100;
log("Selling "+shares+" shares of "+stocks[i]+".");
TradeResult result = trader.sell(stocks[i], shares);
log("Result traded "+result.getNumberTraded()
+" shares of "+result.getStockSymbol());
private static void log(String s) {
System.out.println(s);
software reviews

Ipad 2 gone completely dead...not responding to reboot or charging..last check with service station last week said battery was in good shape, needed software update...how to go about it...please help

Ipad 2 gone completely dead...not responding to reboot or charging..last check with service station last week said battery was in good shape, needed software update...how to go about it...please help

By reboot do you mean pressing and holding both the sleep and home buttons for about 10 to 15 seconds (after which the Apple logo should appear) ?
If you can't get the iPad to switch on then you won't be able to update its iOS version

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

How to map business process and enterprise service?

Recently, I read some documents about ESA. I'm confusing about the relationship between business process and enterprise service. In other word, how to map the business process to enterprise service after the business process is analyzed? Is there any methodology/rule to define business process and wrap them into service in ESA?

Hi Sherry,
I like to add some of my thoughts about that discussion. From my point of view ESA is much more than just another BPM or Enterprise BPM. ESA is adresses six key areas and I think all of them are really needed:
- People Productivity as the word itself describes...it's about portals and productivity.
- Embedded Analytics has to integrate transactional and analytical content.
- Service Composition is used for model-driven service composition and services orchestration.
- Service Enablement is about a Enterprise Services Repository filled with business meaningful Enterprise Services and service patterns for enabled objects. Excactly this is where SAP has years of experiences.
- Business Process Platform is about service enablement of all application platform objects and engines. This is the place where "BPM" for core business processes resits.
- Life-Cycle Management has to cover the deployment, configuration, operation and change management for ESA based processes.
Therefore the term "BPM" is located in serveral layers of an ESA approach. On the level of Business Process Platform BPM is providing the choreography for core business preocesses.
At Service Enablement BPM needs to compose out of granular services (I would say "atomic" services)
buiness meaningful services (here we have "molecular" services).
The third level where BPM could be used is Service Composition because exactly this is the place
where serveral Enterprise Services could be combined to a process representation.
To come back to the discussion:
1. The question should be how to indentify business meaningful services which could represent single process steps. ATP check, Credit card check, ... could be examples. In theory this service could be out-tasked, defined more flexible etc. This means that processes needs to be evaluated for Enterprise Service candidates. Afterwards you can check against SAP's Enterprise Services Repository for already existing Enterprise Services. The evalution for enterprise services candidates will be supported by the metodology mentioned by Kaj and David.
2. I think domains in this context should be motivated by business and/or functional areas. Depending on the granularity. For example Order Fulfilment Services, Master Data Services, Search Services... These kind of serices can be combined again to services such as "Search of Master Data" (Search Service + Read Master Data Service) etc. or can be used to generate UI to be used in a ESA application.
Your thoughts?
Very best regards
Wulff

How do I finish updating my iPhone4 to iOS7 when it closed down during the process as I had it tethered to my computer and I assume the computer needed the internet to complete the process?

How can I finish updating my iPhone 4 to iOS7 when I had it tethered to my computer (computer using the connection from my phone) and during the updating process, when the phone restarts itself, I lose the internet connection (silly me, not thinking of this) and now it can't finish the process. Can I use a friends computer if I log into my iTunes account...as I downloaded it ok...just cant finish the update. Any ideas?
Thanks
K

If this is the third time that this has happened to you, I don't blame you for being upset. On the other hand, after the second time, you should have learned the importance of backing up your iOS devices and apparently you didn't do that or you wouldn't be in such a panic.
You cannot downgrade the iOS, You have to restore your phone now and all of the contents will be erased. I think you know that though, and I think that you know that there is no way around it either.

How to update web service proxy in JDeveloper 10.1.3.0

hi all
I want to ask how to update web service proxy in JDeveloper 10.1.3.0?

What do you mean update?
You can go into the source code and update whatever you want.
If you mean that the WS spec has changed - then you can either change the proxy manually, or create another proxy.

How to start a process via web service with automatically run first screen

Hi guys,
we want to start the process via web service and skip the inbox presentation of the first human activity of the process. It means that the first activity should start automatically by clicking the link (wsdl link).
Is there any opportunity to realize this thought?
THX
Regrads
Phil

Hi Phil,
You may refer to my blog series for steop by step procedure on how to initiate a BPM workflow through webservice. Below are the links:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
/people/arafat.farooqui/blog/2010/06/23/introduction-to-sap-netweaver-bpm-part-5
Hope this helps!!
Regards,
Arafat

How do I get my autogenerated service code to update

If I add some extra columns to me database table , how do I get my autogenerated service code to update? I know how to refresh the service but that doesn't appear to update any of the stuff like this with the new columns
     // initialize property maps
        if (model_internal::dependentsOnMap == null)
            // depenents map
            model_internal::dependentsOnMap = new Object();
            model_internal::dependentsOnMap["noticeID"] = new Array();
            model_internal::dependentsOnMap["text"] = new Array();
            model_internal::dependentsOnMap["title"] = new Array();
            model_internal::dependentsOnMap["categoryID"] = new Array();
            model_internal::dependentsOnMap["createdDate"] = new Array();

Adobe, you never cease for 1 day to impress me, imagine thinking of that
really cool feature, many thanks
best wishes
Nikos
Web Developer

MDSModelDeploy listservices - how update incorrect services

Hi all, when I run MDSModelDeploy listservices results similar to the below are returned. The first two services are the result of me incorrectly naming the MDS website in the Web Configuration section of the MDS Configuration Manager. Does anyone
know how to update the services so the correctly named service is MDS1 and remove the incorrectly named ones?
MDS1 - IncorrectName#1
MDS2 - IncorrectName#2
MDS3 - CorrectName
Thank you in advance for your help!
Cheers,
Jason

Hello,
You can update, delete, insert value in the web.config file at this location :
"C:\Program Files\Microsoft SQL Server\110\Master Data Services\WebApplication"
For details you have to change 2 things :
For the service name :
<masterDataServices>
<instance virtualPath="MDS" siteName="Default Web Site" connectionName="MDS2" serviceName="MDS1" />
</masterDataServices>
And for excel connection parameter :
<service behaviorConfiguration="mdsWsHttpBehavior" name="MDS1">
<endpoint binding="wsHttpBinding" bindingConfiguration="mdsWsHttpBinding" bindingNamespace="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" contract="Microsoft.MasterDataServices.Services.ServiceContracts.IService" />
<endpoint address="bhb" binding="basicHttpBinding" bindingConfiguration="mdsBasicHttpBinding" bindingNamespace="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" contract="Microsoft.MasterDataServices.Services.ServiceContracts.IService" />
</service>
If you don't change the second parameter Excel will not be able to connect to your webservice anymore.
Alexandre.

HT4623 I started to update my iphone4 software to iOS 7.0.4 while in the process of updating a text message came in- now it keeps saying checking for update then an error comes up that says try again . How do I finish updating my phone?

I started to update my iphone4 software to iOS 7.0.4 while in the process of updating a text message came in- now it keeps saying checking for update then an error comes up that says try again . How do I finish updating my phone?

Hi
A little information will be of a great help, witch iPhone did you upgrade, memory , and version of software ( iOS 8.x.x )?
Try restarting you iPhone and make sure you have a god internet connection , get as close to your wifi router (1-3 meter / 2-9 feet ) as possible. Don't use restore to factory settings before you tried other options . And most imported du you have an iCloud backup.
//Sorenc

Re: Toshiba Service Station - Cyberlink Power DVD Update

Hi Everyone
Just purchased this new Toshiba Satellite L50-B laptop, downloaded the firmware update and then it said the DVD software needed updating. But it seems the boxes are greyed out in the Service Station app. Please can anyone help?
Thanks in advance.
Ben

Hi Ben
Pretty often messages from service station can be confusing. You have new notebook and if everything works perfectly you don't need to install any update, especially not for DVD player.
As far as I know service station just offers information about updates but you are not forced to do this.
I use my notebook since more than three years with original factory settings and I didnt install any update for drivers or preinstalled software. Everything works well and stabile. Why to change anything?

Service Station Updates 9-20-11?

Even though I have all notifications turned on ,my Thrive did not notify me about the following three updates. Checking Service Station this AM the following appeared. (1) WiFi settings Utility Update (2) Thrive Service Station Update (3) Lto DL Service Update. Have seen no documentation about these updates from any source on the web including Toshiba. Are these valid updates, and if so what do they do or correct? All three updates are dated 9-20-11. Thank you in advance for any and all replies.

http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&category=&moid=302608... .......... couldn't find them in the support bulletins. Thought you might want the url for bookmarking anyway. cheers

Satellite R630-112 - Service Station has never showed any update or alert

Hi,
I'm tired of manually updating my drivers and toshiba software, because Service station does not show any update or alert. I have relied on Tempro Alerts and on manual comparison of versions and dates.
Has anyone had the same problem? Any solution for it?

> the wireless connection goes down a lot at my work network.
This would explain why updates are important for you. In this case I would also search for driver updates because this shouldnt happen.
Anyway, this can have different reasons. First of all I would disable the WLAN power saving feature of WLAN card. This can be done in Windows power management. You have to do this for every power profile. Maybe this can help you:
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
Wireless Adapter Settings should be set to maximum performance!
If it doesnt help you can try a WLAN driver update. You can do this yourself and newest version can be downloaded here:
http://aps2.toshiba-tro.de/wlan/

How do I process updates in Service Station

Similar Messages

Maybe you are looking for