How do i re install a game that i already bought with a symbol of icloud on the game? i tried everything but it WONT install on my iphone. pleassse help?
how do re install a game i already bought, it has a icloud symbol on it but when i press to download the game on my iphone it WONT work? plllleeaassee help me? i have tried almost everything and cant do it. also do i have to connect my iphone to my comp to solve this problem?
What is the game and what are the minimum requirerments?
Similar Messages
-
I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.
Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours. -
Hi all! im using the OS XV10.6 not 4 sorry. Anywayz, i tried to delete all data that i dont need to have more free space. However, after i deleted all the files that i dont need, then empty the trash cane, my free space is still the same! I did research and try the "erase for free space" But it is still the same! please help!!! Is there anyway to increase my free space?
Hello, are you using Filevault perchance?
How much free space does it report if you do a Get Info on the whole drive?
Could we be confusing Memory (RAM), with Hard Drive Free Space (Virtual Memory)? -
I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?
Do you have a TM backup or a clone? If so, erase the drive and restore with TM or clone back.
If not you'll have to reformat and re-install the OS that shipped with your Mac. If it shipped with Lion or ML you can do the restore from your Recovery Volume
EDIT: I assume you are saying that you just installed 10.8? -
What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????
Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either. I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!! DW
Original message----
From : [email protected]
Date : 25/01/2015 - 11:53 (GMTST)
To : [email protected]
Subject : How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
created by susanl96972449 in Photoshop Elements - View the full discussion
Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken. So I am presuming that means it is installed and no further action required?
Here's my problem: I have had no problems getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week. Suddenly when they are imported all I see is the timer icons but they don't open to let me view them. If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair. So anyone out there experienced this and can give me some advice? Please?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
In WSE12 R1 you can install the connector application on a Windows 7 PC that has already been joined to a corporate domain using the skip domain registry key:
reg add "HKLM\SOFTWARE\Microsoft\Windows Server\ClientDeployment" /v SkipDomainJoin /t REG_DWORD /d 1
Upon doing so, the client PC is then able to perform client backups to the WSE12 R1 server but remains a member of the original corporate domain. This is no longer possible when using this registry key when installing the Windows Server 2012 Essentials
R2 connector
Is anyone aware of a way to install the WSE12 R2 connector and skip domain join without first leaving the corporate domain?
I am avoiding moving to WSE12 R2 until I can figure out a way to accomplish this.I noticed this was incorrectly marked as an ANSWER. Although it wasn't a resolution, I recognize the connector install behavior is different in R1 vs R2. If it would be possible to ask the developers to include the following functionality in a future
Essentials R2 Update, we'd appreciate it. During client connector install, give user the option via radio button: 1.) install connector join domain, enable client PC backup 2.) install connector, join domain only, no client PC backup 3.) install connector,
do not join domain, enable client PC backup Option #3 would satisfy this request and negate the need for unauthorized registry hacks. Thank you.
Great discussion here, and glad things seem to have changed for the better with R2.
Spot on with those suggestions, miles267!
Back in Dec 2013, I wrote about my fairly simple registry tweak done at just the right spot during the client connector install, still seems to work like a charm
(as of Dec 12 2014, ~15,000 folks read it so far):
TinkerTry.com/connect
which redirects to:
http://www.tinkertry.com/how-to-make-windows-server-2012-r2-essentials-client-connector-install-behave-just-like-windows-home-server
with a lot of (admittedly confusing) comments:
http://www.tinkertry.com/how-to-make-windows-server-2012-r2-essentials-client-connector-install-behave-just-like-windows-home-server/#comment-1705687227
Sincerely hoping such feedback helps encourage Microsoft to take a simple radio box checkmark request seriously. Really, it'd really help folks a lot, so they wouldn't have to feel they are trusting a "hack" which is really a simple, documented
registry tweak, done at just the right time.
I hope this little post here, and my article, truly helped people out! -
I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?
You may be able to find your Apple ID at Look up your old and forgotten Apple ID
-
I have Adobe Premiere Element 7 installed and I use that as to editing my video's. I am having such a hard time trying to lightening a dark video. I tried everything but nothing is working. Please help
saloumehdaghighi
Premiere Elements 7, on what computer operating system?
In Premiere Elements 7, there are various effects for lightening a dark video. After applying one of these lighting effects, have you been editing these applied effects in Edit Effects/Properties Palette after you apply them?
Video Effects
Adjust - Brightness and Contrast, Auto Levels....
Image Control Panel that is a default Properties Palette panel along with Motion and Opacity....for Brightness, Contrast, Hue, and Saturation.
ATR -
How do you fill in a form that was saved as a template? When I try, the "template" shifts, which is not how a template should work!
Templates, as I understand them, are fixed; you can "fill them in" without shifting them. Yet, I've saved doc as a template AND it shifts. Argh!Thanks for your response.
I've managed to fix it but I wouldn't recommend the following as I'm sure its unsupported and I'll probably have problems down the line
On the host
* mv /etc/zones /etc/zones.bak
* reboot single user
* apply kernel patch (the one that ultimately I had to get on and which was giving pre-req dependency errors when running zones)
* create a new zone now that host system is all up to date
* Copy the operating system directories of the new zone (the one that's all patched) over the troublesome zone (the one that can't take the patch). Take backups first
* cd /zones/new-zone/root
* find sbin -print | cpio -pudm /zones/bad-zone/root
* find usr -print | cpio -pudm /zones/bad-zone/root
* find lib -print | cpio -pudm /zones/bad-zone/root
* cd /zones/new-zone/root/var
* find sadm -print | cpio -pudm /zones/bad-zone/root/sadm (this copies patches and pkgs directories and I'm sure a lot of other stuff that I didn't want)
* mv /etc/zones.bak /etc/zones
* reboot host
* boot the old zone up. It should now have up to date patches
I'm sure there are real no-no's in taking this approach but it seems to have worked for me. I'll update if I find there are some horrors down the line
Edited by: paul_xedos on Mar 25, 2010 4:07 AM -
How to put songs on that i already bought?
im trying to put music on a ipod that i recently got and put songs on it that i already bought how do i do it?
http://support.apple.com/kb/ht1351
-
how do sync a book that I have added as music to itunes on my iMac and then listen to this book on my iPhone. Itunes says the icloud status is waiting so the song(book) is in the process of being matched but has not yet been processed. (no help there)
Hi,
Why are you trying to add a book as music? It will not match as this only applies to music files. It will be uploaded if the bit rate is 96 Kbps or greater.
You should change media type to audiobook and you will be able to sync by wifi or USB.
Jim -
how to reactivate an old apple ID that has some security issues? I can't acces the yahoo that was used to create that account because it was already recycled by yahoo.
So when I restore my iPad 2, it is asking me for my old apple ID that was no longer working.....
ANY HELP PLEASEHi marcpople,
If you have had an Apple ID disabled due to a security issue, you may find the following articles helpful:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Regards,
- Brenden -
So I had photshop cs5 installed on my pc...i had to get my hard drive replaced! I have the serial number and everything, but I need to know how to download it. I really don't wanna have to pay for the program over again.
If you registered your product, you should be able to find the download and serial number from your Adobe account.
https://www.adobe.com/account.html
Otherwise:
Download Adobe CS5.5 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
You might still have to contact Customer Support to reset your Activations, unless you managed to deactivate the original installation. -
How can I use my old MobileMe email address if I did not migrate to icloud by the deadline?
I had a mobile me account that I did not migrate to icloud. Now when I try and set up an icloud account using the old mobileme email address, it says that address is already in use. I then try and access it but the password doesn't work and it says mobileme is closed. When I try and reset the password, it says an email has been sent to the email on file...which is an old mobileme address that I cannot access.
How can I get this email address set up in icloud?Nice idea - I tried it but it doesn't seem to work (at least not for me).
So here are the details in case, you can spot something more I could do....
When MobileMe was live
MobileMe ID was [email protected]
AppleID (to make iTunes purchases) was [email protected]
When iCloud went live (and MM was still alive)
iCloud account was created based upon AppleID - [email protected]
iCloud would not create [email protected] as was already in use (by me)
iCloud would not merge [email protected] as iCloud does not merge
MobileMe migration to iCloud option was not taken
Deleted all data out of MobileMe account (mail, calendar, contacts, gallery)
Deleted MobileMe mail account off of all devices
When MM died
I received notification that I had not migrated my MM account
iCloud was happily working as Contacts/Calendar sharer using my AppleID of [email protected]
Weeks later on Mac running 10.8
System Preference - iCloud, already logged in with AppleID of [email protected]
Then ticked the untick Mail box
Long wait with small grey whirling cog box, stating "Loading". Eventually a BLANK message box with OK which then disappeared on a timeout.
System Preference - Mail... Re-added [email protected] (now picked up as iCloud account)
Mail - Accounts.... Re-added [email protected] BUT got message "Mail can'y connect to the account..."
So tried logging into www.icloud.com (using AppleID of [email protected] where my contacts/calendar now reside). Clicked on Mail icon and received "@me.com Address Needed" message -
When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?
Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M.
Maybe you are looking for
-
Problem in reading the JDK1.4Logger configuration file from java prog
I have written a java program and want to log the messages in a log file , I'm using commons logging with JDK1.4logger as logging subsystem . I am facing the problem in reading the JDK1.4Logger configuration file which is commons-logging .properties
-
hi,all i am a beginner, now step by step doing a test based on your article. in building process,BUILD FAILED,say "could not create task of type:wsgen.Common solutions are to use taskdef to declare your task,or, if this is an optional task, to put th
-
Scenerio Sheet erroring out in the process of opening it.
In the process of checking scenerios we got this issue where it is mentioned "We encountered a problem performing your request . please contact oracle referring to error tag (otzjck)". While publishing the model One dimension BOM is erroring out and
-
Hyper-V internal (1 of 2, NOT Cluster) network unavailable in Failover Cluster Manager 2008R2
Hi all, I had a very strange situation in my Hyper-V 2 nodes-cluster: I have one networtk for HertBeat only (10.0.0.0/24) and second for HyperV internal networking for virtual machines (In properties marked "Do not allow clustern network communicatio
-
My Bridge can't see the DDS pictures for 64bit Win7, how can i do ? i'm like bridge,but it don't love dds pictures by my job. I has installed dds plugin for photoshop also no use.