How do I remove Lotus Notes PDFMaker plugin via command line?

How do I remove the lotus notes PDFMaker plugin via command line?  I originally deployed Adobe Acrobat 10 as a complete install to many computers.  I see how to remove this specific feature through the GUI in Windows 7 by going to control panel / programs and features / Adobe Acrobat X / change / modify / create adobe PDF / acrobat PDFMaker / Lotus Notes, but this would be a tedious task to do manually at each computer.  I've experimented with a few msiexec commands after removing Acrobat such as:
msiexec /i "\\path to msi" remove=pdfmakerforlotusnotes
msiexec /i "\\path to msi" disable_pdfmaker=yes
Both still install acrobat as a complete install.  Any help and suggestions would be appreciated.  Thank you!

Thank you Sabian, that did the trick.  Here is the command line I used for anyone else having a similar issue:
msiexec /i "\\path to msi" REMOVE=PDFMakerForLotusNotes /qn
I did this on a test machine with a complete Acrobat installed.  I ran the above command and it removed the Lotus Notes PDFMaker plugin.  I should also note that it didn't downgrade my version of Acrobat and all of my custom settings within the application are still there.

Similar Messages

  • [SOLVED] How to Create an Image from UTF8 Text via Command-line

    As the title points out, I'm trying to create an image from unicode text via command line. I tried...
    convert -pointsize 48 -size 400 caption:测试用 text.png
    But that results in question marks for the Chinese characters. So searching around online I discovered that I needed to specify a font which could display the characters. The characters show up just fine in Firefox, KDE, Kate, Terminal, etc so I know I have a font which can render them. I thought it might be DejaVu but this also resulted in question marks...
    convert -font /usr/share/fonts/TTF/DejaVuSerif.ttf -pointsize 48 -size 400 caption:测试用 text.png
    Any ideas?
    Last edited by tony5429 (2011-01-31 23:17:41)

    DejaVu doesn't contain those Chinese glyphs at all, so please don't blame ImageMagick for not rendering them.
    So, Firefox, Kate, Terminal and the others you stated to use DejaVu, if encounter these characters, fall back to some other fonts to render them. These fonts are, however, not vector, but bitmap fonts. (This can be seen if you increase text size (Ctrl++ in Firefox): the Chinese characters don't change, they remain of their inherent size.)
    Actually, e.g. /usr/share/fonts/misc/18x18ko.pcf.gz definitely contains the three example characters, so the mentioned apps may use this font as fall back.
    Apparently ImageMagick doesn't handle bitmap fonts (I'm not sure), so you won't be able to hit your original target. Anyway, since you tried to parse "-pointsize 48", you wouldn't be satisfied with the font size.
    Your only choice seems to be using the above mentioned CJK-approved TTFs.
    EDIT: typo
    Last edited by barto (2011-01-28 21:52:33)

  • Removing Mail from a MailBox via Command Line

    Hi,
    I have a mailBox with > 10,000 (Mailing List Bounce).
    I'd like to be able to delete all the mail from the command line.
    Is that possible?
    Thanks,

    Hi BriGy,
    Base on my search, if you want to remove these service account permission, you need to remove from organizational level, not mailbox level.
    Please refer to the following thread, it may give you some hints:
    Deny permissions for Domain Admins on mailboxes
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Niko Cheng
    TechNet Community Support

  • How can I mount an external hard drive via command line

    I have an external hard drive that's been formatted as "Mac OS Extended (Journaled)" (the default option from Disk Utility). I'm in single-user mode and want to mount the drive. I noticed that when I plug in the drive to the USB port I get some new items in the /dev/ directory, namely:
    disk3, disk3s1, disk3s2, rdisk3, rdisk3s1, rdisk3s2
    I imagine I'm only interested in the disk3*, but I'm not sure which one (or what the differences are, there's only 1 partition on the drive).
    Also, I'm not sure which mount command to use, there are several in the /sbin/ directory. I tried the "mount" command and got a message that noted: "Incorrect super block." Any ideas?

    /usr/sbin/diskutil mount /dev/disk3

  • How do you remove duplicate note events 1 or to ticks apart ?

    How do you remove duplicate note events 1 or to ticks apart ?
    my keyboard was putting out doubled note events durring a session.
    But the note events are between 1 and 3 cliks apart.
    in other words 1 might be at 1 3 151 and the other duplicate at 1 3 153
    So remove duplicate events does not work.
    I dont want to have to quatize all events either.
    thanks
    CC
    Logic X

    The only other option I can think of that may help you is the select highest/lowest notes.
    This will select the top or bottom notes for any notes that are overlapping.
    the key command is :
    **** up ( highest ) or shift down ( lowest )
    It may work on some blocks of notes, but it's a bit hit and miss.
    Other than that it's a manual editing job I'm afraid

  • Servlet for reading lotus notes nsf-file via corba-interface

    Hello,
    we have written a servlet for reading lotus notes nsf-file via corba-interface.
    So we can read lotus notes-files in a portal url-iview.
    Are you interested?
    Best regards
    Oliver Prodinger

    If you check out the thread from my question (524480), we found
    that we had to enable the IIOP task on the domino server as we
    were not running it, this cured the problem I think you are
    encountering.
    This has not solved all our problems as I only see Notes data in
    the Inbox Portlet Preview mode, this problem is refered by other
    contributors as the collapsing Portlet problem (496625) and I do
    not know whether there is a solution to this problem yet.
    Hope this helps.

  • How to turn off Bluetooth adapter via command line or script?

    I'm trying to write a batch script that will be able to turn on/off any connected Bluetooth adapters.
    In the "Bluetooth Settings" window, how can I change the "Turn off Bluetooth adapter" setting via command line or script?
    Due to my account not being verified yet, I cannot post a screenshot.  I will update this thread as soon as my account is verified.

    get-service -DisplayName 'Bluetooth Support Service' | Stop-Service
    ¯\_(ツ)_/¯

  • Argument "10.2.8.39 c/ 1435.Process" for option "connection" is not valid. The command line parameters are invalid.

    Hello,
    I am running a sql job which runs SSIs pakcage imported from Integration Service Sever..
    it give me this error.... the server is :10.2.8.39 and the database is process
    how can I fix It? 

    Hello Arthux ,, thx alot for your help,,, I run the job again and this time it gives me this error ??
    Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
    11/28/2011 13:58:09,SSISScoreCardsSDM,Error,0,OPLINKDEVINTRA\OPLINKDEVINTRA,SSISScoreCardsSDM,(Job outcome),,The job failed.  The Job was invoked by User LINKDOTNET\michael.philip.  The last step to run was step 1 (SDM).,00:00:01,0,0,,,,0
    11/28/2011 13:58:10,SSISScoreCardsSDM,Error,1,OPLINKDEVINTRA\OPLINKDEVINTRA,SSISScoreCardsSDM,SDM,,Executed as user: LINKDEV\OPSQLADMIN. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 64-bit  Copyright (C) Microsoft
    Corporation 2010. All rights reserved.    Option "    /CONNECTION" is not valid.  The command line parameters are invalid.  The step failed.,00:00:00,0,0,,,,0

  • How can I install on Windows remotely via command line?

    Hello Folks.
    I want to install an application on Windows remotely and via command line, For example, I need a tool like Psexec or WMIC but I don't like the user understand it. Any idea? 

    Hi,
    Please also refer to following FAQ article and check if those four general ways will meet your requirement.
    [Forum FAQ] How to deploy applications remotely
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to reset the network IP address from terminal/command line in Mac OSX?

    Do anyone knows how to set the network IP address from terminal/command line in Mac OS X?

    how about a GUI, ever heard of a GUI? it's this really neat thing, where you don't have to worry about remembering long strings of text to do something. Mac OS X actually has a rather decent one (that was sarcasm by the way, Mac is the best) you could have it done in like 30 sec, if you use the network pane of system preferences.

  • How to launch a specific TestStand sequence file from command line?

    I've written a TestStand sequence file launching other sequence files.
    When I launch it via the TestStand GUI, it works well.
    Now, I would like to launch it via command line. Could you indicate me how to proceed?

    Hi,
    I think this link can help you:
    How to Run a Sequence File When Opened from Windows Explorer
    http://digital.ni.com/public.nsf/websearch/146D372C1F807E6D862567E7004881AB?OpenDocument
    regards,
    Alexandre D
    NIF

  • How to change fcalias www via command line & particular port performance status

    how to change fcalias www via command line & particular port performance status

    how to change fcalias www via command line & particular port performance status

  • How do I get LR2 to "load from device" via command line?

    Hi,
    how do I get LR2 to "load from device" via command line?
    I've got XP to load LR2 when a "camera" (and only a camera) is connected but really cool would be if LR2 would also import the pictures.
    cu,
    Michael

    1. Make sure you are using IOS 7.
    2. Make sure your iPad is register in My Support Profile.
    https://supportprofile.apple.com/
    3. Try downloading again; it should be free.

  • How to Create Test Sequence Document in HTML using command line

    How to Create Test Sequence Document  in HTML using command line
    I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using   C#  .Net

    If you aren't able to figure out how to call a C++ DLL in .net then there may be another option.  Unfortunately I don't know how to do this off the top of my head and I don't have an example.
    The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options.  Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
    Hope this helps,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • [SOLVED] How to Crop an MP4 Video via Command-line?

    I have ffmpeg, mpg123, and mencoder. Does anyone know of a way I could use any of those to crop an mp4 video via command-line? I am trying to take off the black space above and below a video. Thanks in advance!
    Last edited by tony5429 (2009-04-12 00:12:57)

    I don't think it's possible to crop without re-encoding, but you can crop from the command line with ffmpeg and mencoder. Not sure about mpg123 - I think that's for playing audio but I could be wrong there.
    Anyway, with ffmpeg you can do cropping by using -croptop, -cropbottom, -cropleft, and -cropright. So if you wanted to crop 16 pixels off of the top and the bottom, your command line would look something like this:
    ffmpeg -i <input file> -croptop 16 -cropbottom 16 <video encoding options> <audio encoding options> <output file>
    With mencoder you use the "crop" video filter, like this:
    mencoder <input file> -o <output file> -vf crop=320:208:0:16 <other options>
    where the "320:208:0:16" means that the resulting picture is 320 pixels wide, 208 pixels high, and the 0:16 is the x,y position of the cropped area.
    These command lines are just really very basic examples - ffmpeg and mencoder have a LOT of options. Way too many to explain here. If you don't believe me, just try reading through the mencoder man page sometime. (There's an online version of it at: http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html)
    Hope this helps!!

Maybe you are looking for

  • Separating my iphone from a shared apple ID and itunes - will I die?

    stepwise, how do I remove my iphone and ipad from a shared apple ID to a new account? will my previously downloaded content disappear from my device?

  • Cannot Pre-order the Eclipse soundtrack!!!

    I am SURE of one thing, i have money on my itunes account! Okay the situation is this, i cannot pre-order AND preview the Eclipse soundtrack.When i click the pre-order button nothing happens. When i click preview for the single thats available nothin

  • IPod 1gig bug...i think.

    This isnt really a question, well i guess it is, but, when I go to rate a song on my 1 gig nano, i rate it real quick, and then press the middle button to go back to the time of the song, and, it changes screens, but, is still the rate screen. its we

  • Forms and WebCache

    Hi Does WebCache using load balancing works with N middle tiers with forms?. How does the webcache know that a particular session is tied to a specific server?. Regards, Néstor Boscán

  • Is there any way to quickly access the options menu without clicking "Firefox/Options"?

    I want to be able to quickly jump to the Firefox Options menu without having to click the "Firefox" button and then "Options" after. The reason I want to do this is because I want to be able to quickly change fonts, and I also want to quickly allow/d