How do I restrict who can email my printer for sprint services

Subject says it all. I believe I am all registered but did not see opportunity to change mode to locked

Login at the ePrint center, then click the button "ePrint settings".
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

HT4436 how do i setup a new email address/account for another family member in icloud

how do i setup a new email address/account for another family member in icloud?

They will need to get their own Apple ID - go to http://appleid.apple.com to set up a new one. You will need a different non-Apple email address from any already in use.
Then they will need a separate user account on the Mac, or their own computer. You can then set up the account and add an @icloud.com email address in System Preferences>iCloud.
Although you could set up an alias address on your own account, I should advise against this - once created you cannot detach an alias from the account so they wouldn't be able to move it to their own account at a later date and their email would be inextricably linked with yours.

HT201229 What if i blacklist a contact who sends opt in purchaces for their service?

What if i blacklist a contact who sends opt in purchases for their service? This has happened to me twice in 2013. when I receive the txt it says Welcome to IFortune Daily Horoscopes ...... $9.99 a month. Type STOP to quit. If you don't type stop FAST! like seconds i mean.... you get a follow-up message that says congrats we just billed you 9.99! or like that and I called to cancel it worked out fine.
Then again the next time it said like "AT&T free message" Your subscription purchase was successful iFortune horoscopes and more for $10.99 will automatically renew on xx/xx/xx also canceled successfully. my question is if I block these will i simply not see the message but be billed all the same?
Anyone?
Thanks!

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How do I specify who can read my Filelink uploaded file? (Box)

I have uploaded a jpg file to Box following your instructions but was surprized that I was not given an opportunity to choose which users can retrieve the stored jpg. The instructions in Box prior to actually uploading anything refer to choosing a
"swap" recipient but no such option showed up in my registration and upload. Is that selection of who can read this jpg file no longer available in Box?
Thanks, Ralph M. Deal, new to filelink and a frequent photo sharer.

how are box or any other provider going to know who people are. They do not need an account with that provider to see the mail. That is the whole purpose. Anyone with the URL can open it. But only those with the URL, their is no browse process. (security by obscurity)
Now before you start on about security, be aware that your jpg if attached to an email would drag all over the internet while it was getting delivered in plain text, still no password required and certainly no encryption.

How do I control who can print over my wireless Officejet Pro 8000 A809n?

Hi all,
Looking for some help as to how I can control who can/cannot print over my Officejet Pro 8000 A809n (CB047A) printer.
We have multiple users in the house, but I only want to allow certain people to print wirelessly, is there some way I can set this up?
Any help would be much appreciated!

Sorry, you cannot control this other than to remove the printer from the network, turn it off or otherwise disable it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do i change who can see all of my "settings" i...

I can only change what the "settings" on my profile say i cant change who can see them like at my profile before i hit edit it says oublic or private or contacts next to it but whne i hit edit i can change that plz help (I spent a half hour trying to figure out how to ask a f ing question dont make it for nothing!)

i'm not sure what you exactly mean, but there are some account details which privacy settings can not be changed, meaning they are fixed either visible to public (anyone), contact only, or private (only to you). If the privacy setting/visibility of a certain account information can be changed, there will be a dropdown selection menu opposite them.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Is there a way to restrict who can connect/find a HP MFP attached to a router.

We have a HP MFP connected to a local network router. I'd like to restrict access to who can print to it. The printer is connected via ethernet. Anyone who has access to our network (wired or wirless) can find/connect to the printer. We only want certain people to have access to it. Is there a way to set up the printer to do this?

Hi rross3,
Depending on which printer you have, this may be possible through the printer's EWS (embedded web server). To access the EWS, open a browser on your computer and type the IP address of the printer into the address field. If you can access the EWS, then check for Settings tab>Firewall Rules. If this exists, you can create a new rule to allow only certain IP's the ability to print to the printer. It would probably be best to assign static IPs to the computers you want to be able to print.
Alternately, if you have access to the network's router, it may have a similar function. You would also want to assign a static IP to the printer (as well as the computers), then allow access to only the computers you want to be able to print (following the same instructions above).
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

I need some people who can test the following for me - Wake on Ethernet Acc

Hey there,
i am sorry for crossposting but i need someone who can confirm something like a bug in 10.6.2 SL.
What you need:
Two Macs running 10.6.2 SL which are in the same Network.
The following settings need to be activated on both Macs:
1. System Preferences -> Energy Saver -> *Wake on Ethernet Access*
2. System Preferences -> Energy Saver -> Computer Sleep set to never
3. System Preferences -> Sharing -> Screensharing and File Sharing
What you need to do is simple. Start both Macs so that they see each other in their finder.
Now connect with one Mac to the other and wait a bit until you can see the folders of the distant Mac. As soon as those folders show up, click on the "Screensharing" Button on the upper right side of the finder. Enter your PW (if set up) and wait until you can control the other Mac. Now simply go to Apple -> Sleep on the Computer you just connected to via this screensharing session (by using this screensharing session and not the keyboard or mouse of this distant Mac). After this Mac went to sleep close the screensharing session.
Now you need to wait for 2 hours. You are not allowed to start or use the Mac you just set to sleep.(The other one which you used for connecting to the other Mac may be used just as normal).
Now here is the point where all of this gets "interesting". Because you enabled "Wake on Ethernet Access" the Mac you just set to sleep will wake up in about 2 hours to perform a sleep proxy announcement. Usually this Mac will wake up for 15 seconds without turning on the screen. After 15 seconds it should go back to sleep.
What i found out: As soon as you set your Mac to sleep by using a VNC Tool like this Screensharing App (i.e. because you are not in the same room/city/country as the other mac and you cannot put it to sleep manually with the attached keyboard) the Mac will wake up but will NOT go to sleep again. This makes the whole Back to my Mac and Wake on Demand feature useless as it was designed to safe power and not to start a Mac (that was set to sleep by Screensharing) after 2 hours without automatically put it back to sleep.
I need some proof that i am not the only one with this problem so i would really appreciate your help in this.. it will cost you 2 hours where you cannot use your second mac but it might be really useful to me if you have the same issues.
What i already did while troubleshooting:
-Reinstall the Firmware of my Cable Modem and Router
- Restart every of my 3 Macs which behave like this
- Reset PMU, SMC, NVRAM, PRAM and everything that is possible on every Mac
- Reinstall the OS (only thing i installed were the updates to 10.6.2) on every Mac. Same issue on a clean fresh install.
Thank you and happy new year from germany everybody
greetings
André

*Important notice for Macbook/Macbook Pro/Macbook Air Users:*
The "Wake on Ethernet Access" Option is only working when the Mac you just set to sleep via Screensharing is *connected to your power supply* *and its lid is NOT closed.* Please consider this in your testing.
Thank you!

Needed: Person who can help me set up mail service

Hi...I've been reading the forum for days and have been finding information in small bits and pieces...but I need someone who can help me put it all together. Basically, we are trying to move our mail server in-house. We have a better than T1 connection, I just need SOMEONE who can tell me exactly what we need to do to set up mail service on osx server 10.4.8 to work for us. Any takers?
I have enough knowledge to set up our web and file sharing services (very easy, no brainer stuff), but really I'm lost on the Mail Service setup.
Thanks!

Hi
I hope this thread is not resolved. Even if it is, this is my solution.
0.1. You must have a domain name pointing to your public IP
0.2. Your router (if you have one) must forward smtp, pop, and imap ports to the private IP adress of the sever
Server Admin
1. You must have DNS enable with your domain name configured. I presume that you know to.
2. Setup your mail service
in General
2.1. Activate POP
2.2. Acivate Imap (if you need)
2.3. Activate SMTP
2.4. Accept incoming mail
2.5. Retain outgoing mail
in filter
2.6. Set up as you need
in advanced->security
2.7. Set up aurhentifaction for smtp and pop.(important for smtp because you can be a spam relay)
in advanced->Hosting
2.8. add your domain name in localhost window
Users admin
3. Go to your users account (mail tab)
3.1 Activate mail
3.2 Choose receipt method.
I've followed this procedure 5 or 6 times and it's working fine every time.
Be carefull. In 10.4.8, something change in Imap service and the send of messages dont work. There is a little corrective to apply (a line to change in a config file but I do not remember what)
Sorry if the words are not exactly the same on you screen. I'm working on a french vs and my english is not very good.
Good luck
Vinc'

Can Anyone Beat This for Terrible Service

Verizon should be ashamed of itself. I started with them in Feb. 2011. I bought a Droid x, which began to reboot. They replaced it with a 'refurbished' model. That rebooted. They replaced with this yet *another* Droid X, which not only rebooted but the screen went black during a call and couldn't be accessed. I had to do a battery pull.
A nice supervisor upgraded me for free to a X2. The first time I used the camcorder, it froze the phone. New supervisor offered me a free Incredible 2, but I didn't want that. He said he'd already ordered it for me but when it came, I was to retun it and let customer service know and they'd switch it with a new X2. When the time came to return it, customer service said that the supervisor was on vacation, no one could contact him and he left no instructions to replace my X2 with a new one. A *month* later, with *no one* able to get in touch with this supervisor, another supervisor tells me the only way to get a new X2 was to extend my contract 6 months and I'd get a gift card to pay for the new X2. Time came to use the gift card and there was still $109 left the card didn't cover. Took a lot of work to get that resolved.
Three weeks go by and the phone is perfect......until 2.3.4 is upgraded and guess what? Yep. The camcorder freezes. Verizon is totally useless and wants me to go back to refurbished models (what did I extend my contract for???) and switches me over to Motorola - in the Philippines, who can't help me. When I finally talk to someone at Motorola, they want me to send them my phone for 2 weeks with no loaner so they can reload the OS.
And Verizon? The rep I spoke to said that Verizon is very well aware that these phones are buggy and the repairs and returns are "making them look so bad that they have a policy change coming so that all returns are to be sent to Motorola instead of them."
I want out of my Verizon contract. I bought my phone and service in good faith and I've not have one phone longer than a month because of all the problems with a phone they *know* and *admit* is buggy. I'm filing complaints with the FCC, the FTC, Verizon, Motorola, the California Attorney General's office, and the BBB. No company should sell devices they know are faulty and yet Verizon is. The rep admitted it. And from all the other people I see on this forum talking about how they've returned their phones numerous times, I am far from the only one.
Shame on you, Verizon! You should do the honest thing and let me out of my contract so I can sign with a company who doesn't sell faulty devices.

I have thanks, I was just answering 06jpearce
This is what I wrote:
Over 9 months and 20 openreach appointments and my broadband is still not fixed. They have tried the "put up with it or we will just say your line is too long and we will stop all broadband service" about 3 times now, but when I point-out my next door neighbour is with TalkTalk, and their BB is fine, and also point out I've had much faster BB for years, they back down.
My speed has gone from 2Mbps to 384Kbps, and every time the phone rings the broadband disconnects.
I am an IT engineer that works from home and about 5 times a day I have to tell my customers that my BB has dropped out and then I explain that I've been waiting 9 months for BT to fix it.
Also I used to set up my customers on BT Broadband but obviously I haven't been doing that for the last 9 months.
I'm sure that the fault is in the old aluminium cable that Openreach don't want to touch (in fact that is what the last engineer told me) .
When you add up the cost of all these engineers calls, and the loss of business from the bad name you are getting, it would have been far cheaper to replace the cable.

How to pass a smartforms to a local printer for printing

I have converted my smartforms to PDF.
I need to pass the PDF to a local printer for printing the PDF.
How can I achieve that?
Any tips in this issue will be of great help.
Thanks
Surkumar

Hi Surkumar,
plz go through this link
To send the output thro
Thanks
Mohinder

Very urgent: Can't create LSMW for PO service item

Hi all,
I created LSMW for PO service(Item cat ="D") by using BAPI
( Business object: BUS2012, Method:CREATEFROMDATA1, Message Type:PORDCR1 and Basic Type: PORDCR102)
This below is my source filed.
POHDR
PO_NUMBER
    POITEM
      PO_NUMBER
      PO_ITEM
          SERVICE-ITEM
             PO_NUMBER
             PO_ITEM
            Activity Item
            Activity Number
              ACC_ASSIGN
              PO_NUMBER
              PO_ITEM
              Activity Item
              Activity Number
              Sequence Number
After i started idoc i got the message Message no. SE518 (No account assignment exists for service line 0000000010)
How can i slove this problem?
Thank you,
Duanchai

so you consider this closed?
Very urgent: LSMW

I accidently created files using a Free Trial version of InDesign. Now the files are gone. Where did they go? How do I get them back? I pay for this service...

I accidentally created files using a Free Trial version of InDesign. Now the files are gone. Where did they go? How do I get them back? I pay for Creative Cloud... but used the wrong login apparently.

Files you save don't disappear, even if you no longer have the software that created them. They're right where you saved them.

HT4865 How can you use find my iphone or find my friends on a ipod for a kid (daughter) but restrict who can see your personal calenders on their device. I realize you can turn off icloud. If ipod is lost, others can get your data by turning on icloud

I just purchased an ipod for my daughter. Since she is only 7 y/o she cannot create an icloud account. Therefore, I had to use my apple ID to create an icloud account on her ipod. I would like to have find my iphone and friend finder on her ipod for tracking purposes. The only problem is that all of my personal calender, notes, reminders etc get transferred automatically to her ipod which I don't want.
I turned off the icloud calender, notes, reminders etc on her device so that my data doesn't get transferred to her device now. My biggest concern is that if she loses her ipod someone could turn the icloud function back on and automatically get my data.
Is there anyway to be able use the tracking features yet protect my icloud from being turned on by a thief?

Password locks, Restrictions password protected or not anyone who gets your iPod can restore it to Factory Settings/New iPod. This will completely disable Find My iPhone so that the iPod can no longer be tracked. It is not a good idea to not use the lock password, because if someone get your iPod they can see all of your contacts, calendar entries email, email passwords, etc.

How to restrict who can book a course in LSO 600?

We are using LSO 600. Is there a way to restrict only certain employees within an org to be able to book a course? I was thinking there may be a relationship that I can add at the course type or course so only one org can book the course. The desired end result will display an error message if someone outside of the org tries to book the course. Thanks.

Our requirement was to restrict employees based on employee group,.i.e., management, non management, external/contractor, affiliated etc... we created relationship(033) in hrp1001 between target group otype = 91 id = different id's for each group that i mentioned above.. to discipline/subdiscipline/coursetype etc.. In the login we classify these employees and in the initialization event of navigation/trainingtype.. call an RFC function module which will return all the discipline,subdiscipline, coursetypes etc... then just filter the discipline,subdiscipline returned by standard LSO function modules . It works perfectly fine.. if a contractor logs in and we navigate thru pages .. it will not display courses that they have no access based on relationship that we set in the backend.. for employees we gave full access etc..
sample code..
IF application->learnertype = 'P' OR application->learnertype = 'PT'.
*==get from cookie course type
    CALL METHOD application->get_server_cookie
      EXPORTING
        im_relax = 'X'
        im_name = 'LSO_RESTRICT_D'
      IMPORTING
        ex_data = d_restrict[].
*== if no restriction found, expired cookie.
    IF d_restrict[] IS INITIAL.
*== Get restriction for course group/type.
      CALL FUNCTION 'ZLEARNER_RESTRICTION'
        DESTINATION application->rfc_destination
        EXPORTING
          learner_attuid = sy-uname
        TABLES
          d_restrict     = d_restrict ( Coursetype)
          l_restrict     = l_restrict ( Course group)
        EXCEPTIONS
          not_found      = 1
          OTHERS         = 2.
*==Set restrictions to cookie coursetype.
      CALL METHOD application->set_server_cookie
        EXPORTING
          im_relax = 'X'
          im_name = 'LSO_RESTRICT_D'
          im_data = d_restrict[].
    ENDIF.
*== IF no restriction found for coursetypes, should not display coursestypes
    SORT d_restrict BY objid.
    IF d_restrict[] IS NOT INITIAL.
*==Get restriction for affiliate employee.
      READ TABLE d_restrict TRANSPORTING NO FIELDS
                    WITH KEY objid = trainingtype-objid
                    BINARY SEARCH.
      IF sy-subrc <> 0.
        CLEAR ls_return.
        CALL FUNCTION 'ZBALW_BAPIRETURN_GET2'
          DESTINATION application->rfc_destination
          EXPORTING
            type   = 'E'
            cl     = 'ZP'
            number = '945'
          IMPORTING
            return = ls_return.
        APPEND ls_return TO err_message.
      ENDIF.
    ENDIF.
ENDIF.

How do I restrict who can email my printer for sprint services

Similar Messages

Maybe you are looking for