How do I save an image with an incremented filename?

I am new to LabVIEW and am working on acquiring and saving many 12 bit images. So far I have a File Dialog box to allow me to select the path to save the file. After I select the path, how can I make each image acquisition filename after that increment by an integer and save automatically (i.e. image1, image2, image3, etc)?

jpyung wrote:
Thanks Warren for the VI. I'm new to labview so please bear with me. Just to make sure I understand what's going on in this VI, the first time the program runs, the "error" case structure runs, and then subsequently, the "No Error" diagram runs?
The error case should only run if there has been an error. I've attached a demo program (LV v7.1.1). Put it into the same folder as the "Generate Next Filename" vi and run it or watch it run. If you don't change it any before running it, the first time it is run it will create a subfolder in the folder containing the VI and then add 10 sequentially-numbered text files to it. The next time it is run, it will add the next ten files in the sequence and so on.
Message Edited by Warren Massey on 03-13-2006 01:46 PM
Attachments:
Demonstrate next-file-name generation.vi ‏44 KB

Similar Messages

How can I save an image with background transparency as an eps in photoshop?

I have to submit an eps of my logo and I would like it to have a transparent background. I have googled this many times, followed all of the suggestions and I'm still having trouble.

Follow the help text in PhS CS2. I have shown importat guidelines by bold text:
"To save a path as an image clipping path
Draw a work path that defines the area of the image you want to show.
Note: Paths are vector-based; therefore, they have hard edges. You cannot preserve the softness
of a feathered edge, such as in a shadow, when creating an image clipping path.
In the Paths palette, save the work path as a path.
Choose Clipping Path from the Paths palette menu, set the following options, and click OK:
For Path, choose the path you want to save.
For Flatness, leave the flatness value blank to print the image using the printer’s default value.
If you experience printing errors, enter a flatness value to determine how the PostScript interpreter
approximates the curve. The lower the flatness value, the greater the number of straight lines used
to draw the curve and the more accurate the curve. Values can range from 0.2 to 100.
In general, a flatness setting from 8 to 10 is recommended for high-resolution printing
(1200 dpi to 2400 dpi), and a setting from 1 to 3 for low-resolution printing (300 dpi to 600 dpi).
If you plan to print the file using process colors, convert the file to CMYK mode.
Save the file by doing one of the following:
To print the file using a PostScript printer, save in Photoshop EPS format, DCS, or PDF format.
To print the file using a non-PostScript printer, save in TIFF format and export to Adobe InDesign,
or to Adobe PageMaker® 5.0 or later. "
An image with clipping path contains everything outside the path as transparent.
Tested actually by PhS CS6.
Photoshop is not the right tool. Better use Illustrator or InDesign (ID for logos which are not too complex).
Graphical objects in IL or ID reside on a transparent background without any selection or clipping path
(PostScript concept).
Best regards --Gernot Hoffmann

How do I save an image with hyperlinks so it can be put in an e-mail?

I designed an e-mail and used the slice tool to insert hyperlinks. Now I want to save it so that it can be put in the body of the e-mail with the hyperlinks active and usable. Any suggestions?
Thanks!
BI

When you preview the image from the save for web dialog box, it will open your browser to see the image. It also will have the necessary html code needed for the links to work. Just copy that html code and add it to your email code with the image.

How to save/export image with 3D grid

I am in CS6 with the 3D workspace selected. I need to export/save the image with the grid viewable. I know this is possible as I have seen it on a few other images. The catch is I need it 300 dpi so I cannot just screen shot as png.

I don't understand what's the problem? Can you please elaborate? Show some code snippets and tell where you stucks on.

How can I save the images to the iPhone anywhere

Hello I own Time capsule 3 tb. How can I save the images to the iPhone anywhere in Time capsule
note i used fileexplorer when Outside the home isee Outside Message " error connection failed with the error operation time out "
Thanks

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How can I save my images like a "wedding photographer" does?

I have a Pixma PRO-100. . . with a Windows 8.1 PC. . . and printing through Adobe Photoshop Elements 11.
I just printed some wedding pictures of my daughter - which I got from the "wedding photographer"... when I printed them - they were an exact match to what I saw on my screen (which I've calibrated)... and dead on crisp, great quality.
I'm wondering what a wedding photographer does to their images to make them so "solid" in printing. How do they save them?
when I print something from a my files, (Raw, NEF, or JPEG's) - there always seems to be a color or quality problem? Never a match. It takes several adjustments and print samples before I get what I want.
Is the ICC Profile a problem - or How can I save my images like a wedding photog does? So they print exact?
Joe B

" ... (Raw, NEF, or JPEG's) ... "
I suspect there are some minor differences you are not seeing and/or noticing on screen. But right off, no real wedding photographer will shoot in anything except RAW. You should be using RAW, only, too. The RAW file to start with has way more info in it than any jpeg does.
Next I would bet your wedding photographer does some tweaking to highlights and shadows, plus s ome other stuff that you are not. In other words he is getting the photos ready for printing. Remember printing on paper and "printing for on screen" is two different things.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

How do i save a .png with transparent background? cannot find in help

how do i save a .png with transparent background? cannot find in help

rickseng
With what program are you working and with what version of the program and on what computer operating system?
I suspect that you are working with some version of Photoshop Elements. If that is correct, then be advised that some how
your thread got posted in the Adobe Premiere Elements Forum (video editing) instead of the Adobe Photoshop Elements Forum (photo editing).
If Photoshop Elements question, then please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator
here to see your thread here and move it from here to there.
Photoshop Elements
Thought....if are creating an image on a transparent background in Photoshop Elements Windows for a Premiere Elements Windows project, then you Save As png or psd.
Please clarify if I have misinterpreted your question.
Thank you.
ATR

How do you save an image from messaging

How do you save an image sent with messaging In ios7 on my iphone? I can't find the option and it does not automatically do this.

Press on the image to bring it up full-screen and then press the export button in the bottom left and then choose where to send it or save it.

How can I save the images and movies on a external Disk from iphoto program, to protect the images when problems occur in the laptop,

How can I save the images and movies on a external Disk from iphoto program, to protect the images when problems occur in the laptop,

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

How do I save an image (logo) transparent so that it will appear transparent on any color background such as a gradient or black?

How do I save an image (logo) transparent so that it will appear transparent on any color background such as a gradient or black?
I save image as "transparent" at File > New... but when I place on a gradient background it keeps appearing white. I'm trying to save transparent to be effective on any color such as a gradient or black. How do I truly save as transparent?

Put the logo on its own layer set the layer fill to 0 and add a layer style to the logo layer. Here I duped one change fill to 0 added style.

There is no 'Save as' under the file menu. How do I save a file with another name?

Numbers help refers to the 'Save As' function in the File menu. My version (latest) does not have a 'Save As' function. How do I save a file with another name?

Ross Millard wrote:
Badunit. You have an original file and an edited file. Now you duplicate the edited file and save it with a different name. Now do you have to go and delete the changed file from which the duplicate had been made? And.... is the original still unchaned... still original?
Ross,
For the situation you describe, Apple has provided Duplicate and Revert. Use File > Duplicate to reach this menu:
Regards,
Jerry

How do I select an image with motion blur so that I can put it onto a different background ?

How do I overlay a image with motion blur on a white background (like the first image) onto a different background (to look like the second image)? any help would be greatly appreciated, many thanks ,ed
Message was edited by: motoredd

I’m afraid you may have bitten off more than you might want to chew.
The resulting pixels of an in-camera-blur combine information about the color/brightness of back- and foreground (edit: the result of surface properties and lighting conditions) with motion (basically transparency for this task) in such a way that it seems exceedingly difficult (maybe even improssible) to isolate the foreground in a »pure« form.
One may get a halfway decent mask (as the backgound is at least almost uniform and brighter than the foreground elements) but you may have to manually decontaminate the transparent areas, otherwise the masked object in front of a dark background would have a bright edge.

How can I save an image I have created in Pages as a jpeg?

How can I save an image I have created in Pages as a jpeg? The image has both a photo and various text boxes. I would like to use it in one of the Photocard websites but they only accept jpeg. Any easy solutions please.

Hold command shift 4 and draw a box around what you want and then click again, on your desktop a .png file will appear.
To convert it to jpeg, open it in Preview and Save as.
if you want all your screenshots to be jpg, download the free Tinkertool and make the change.
http://www.bresink.com/osx/TinkerTool.html

How do I save an image with an incremented filename?

Similar Messages

Maybe you are looking for