How do I save to mixdown in mono, 0 db reduction in volume, in 64 bps mp3? Sounds simple, but none of the support staff has been able to do it.

How do I save to mixdown in mono, 0 db reduction in volume, (Same volume level as in the files-no -3db reduction) in 64 bps mp3? Sounds simple, but none of the support staff has been able to do it.

Several solutions to this problem. I believe we may have discussed this over the support e-mail, but I'll share it again here so that it can help others as well.
First, as I discussed in the e-mail, Audition defaults to support Pan Law which prevents content mixed to the center of a Stereo field from being louder than the same content panned far left or right. This provides a -3dB drop to center content by default, but you can disable this completely by entering Preferences > Multitrack and setting the Default Panning Mode to Left/Right Cut (Logarithmic)
Now, when you create a new Multitrack session, there is an option to specify the Master channelization. Here, you can select Mono, Stereo, or 5.1 and this will be the default channelization mode for a basic mixdown operation regardless of your clip content, though can be overridden when exporting a session mixdown.
Next, if you just choose the menu item Multitrack > Mixdown Session to New File... it will always default to the Master channelization. This command does not write to disk, it is a preview or pre-processing step. If you wish to export your multitrack session mixdown directly to disk, in your desired channelization and file format, please use the command File > Export > Multitrack Mixdown > Entire Session... You will then have the complete set of output options, including the option to output at any channelization you like and the format you prefer.
Here, I've disabled the default 5.1 output and selected a Mono mixdown instead.
I've now changed the file format settings as well to MP3, 64K.
With most of these configuration details, you should only need to set them once and these will remain the defaults for any subsequent projects, unless modified again. The Export Multitrack Mixdown dialog will reset the Mixdown options to match the default output, and the MP3 settings may update to reflect the kBps setting nearest your session sample rate.

Similar Messages

How do you save your artwork in Photoshop CC 2014 as an PNG or JPEG file when it doesn't give the option?

How do you save your artwork in Photoshop CC 2014 as an PNG or JPEG file when it doesn't give the option?
Thanks for your time and help in advance.

Thanks for replying. I actually got it to work. I had my work set to 32 Bits/Channel in stead of 16 or 8. Once I changed it to 16bit/Channel, it gave me the option to save as either file. Thanks again.

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

There are a few things to try.
First, if this file came to you vial email attachment, it could have been corrupted. Ask her to zip the file and send it again. That sometimes helps.
I suppose there's a chance that the file is already zipped, so see if that's the case and unzip it if so.
If the file name doesn't end with .indd, add it and see if that helps.
If you are double-clicking, try File>Open from within InDesign.
Last (and I know this sounds like a joke, but I've seen it many times), sometimes people attach a Mac Alias or Windows Shortcut instead of the actual file. What is the file size? If it's really small, that might be the reason.
Also, no offense intended if some of this sounds like stuff you have already tried. I don't know what you know, so I'm just spit-balling.

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

The database structure has been modified - how to check if it happend?

Hello,
I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
My question is - does anyone know how to check if database structure has been modified?
Regards,
Hmg

Hi Szymon,
I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
Satish.

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?

If you never bought the product then you cannot get the serial number.

HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

See this -> http://support.apple.com/kb/HT2727

Can I see how long the longest entry has been in the sticky table ?

Hi,
I have a customer who has a possible issue with the sticky inactivity timeout on the CSS. At the moment we are using no timeout, just relying on the CSS to purge the entries.
However, is it possible to see how long the longest entry has been in the sticky table. I can see the 'elapsed time' with the 'show sticky' command but this only shows 100 entries per time and not in time order ?
Thanks in advance for any help

Michael,
You can use the command "show sticky-table" with L3 or L4 options, depending on what you have configured, then add ip addressing to the command, to focus down to where the oldest sticky entries are likely to be, but theres no other way. If your problem is having too many entries, configure a sticky timeout, as the default of 0 will keep then forever, or until overwritten due to the table being full. If the problem is sticky entries timing out too early, you can use the timeout parameter to increase their life, but the sticky table is limited to 32k entries.
Peter

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

I bought pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

I bought Pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

All apps are always tied to the account from whaich they were purchased and will always have to be updated using that account.
Just because the e-mail account is shut down, has nothing to do with the itunes account. Why did you create a new account? Why not just change the e-mail associated with the old account?

I'm moving an internal hard drive from an old computer to a new computer. How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

How to explain. OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external. All can be viewed in itunes, but none on the external will sync to my iPad. What's up with that.

How to explain. OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external. All can be marked or unmarked in itunes, but none of the photos stored on the external drive will sync to my iPad. Anybody know what's up with that?

What really cheeses me off here is that Apple isn't allowing users enough customization. With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options. If Apple keeps this up, they're going to start losing customers fast. I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
What I don't understand about how they won't let users delete the list of available podcasts now is why? How is this making it a better program? I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was). But to not give users the option to delete that list? It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating. I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature. It smacks of rank incompetence.
What improvement were they trying to make here anyway? There was nothing wrong to my mind about how podcasts were managed in previous versions. Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
And reverting to a previous version is no solution. I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

HT1353 im trying to download games on to the ipod touch 2nd gen and looks like the software driver has been removed,what does that mean and how do i sort it?

i have an iod touch and aparently the software driver has been removed and i had it restored to factory settings as i bought it from someone,what does this mean and how do i solve the problem

Just what error message are you getting?
Are you trying to redownload them directly to the iPod?
If you are getting an error message that included Open GL 2 or similar that means that the app requires that but only the 3G and later iPods support that.

HT5129 I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . . but I have not knowingly published any photos to MobileMe. How can I get this message to stop. It's getting annoying.

I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . . but I have not knowingly published any photos to MobileMe. How can I get this message to stop. It's getting annoying.
Also, how can I remove duplicate photos in an album without doing it manually?
Thanks!

When the prompt pops up next time you start iPhoto select Learn more. Then click on iPhoto preferences and select the Accounts tab. Delete your MM account and the quit iPhoto. Next time you open iPhoto the problem should be eliminated.

I need a RAW converter program and the adovbe system has been recommended. how shall I proceed?

I need a RAW converter program and the Adobe system has been recommended. How do I proceed?

Seems you are looking for DNG Convertor, If so, here is the download link
Adobe Camera Raw and DNG Converter for Windows : http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Adobe Camera Raw and DNG Converter for Macintosh : http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

How do I save to mixdown in mono, 0 db reduction in volume, in 64 bps mp3? Sounds simple, but none of the support staff has been able to do it.

Similar Messages

Maybe you are looking for