How do I scan and detect the NI PCI devices present in the system like 4060 DMM and PCI 6511 etc?

Hi there,
I would like to scan the devices present in the system every time when the software starts.
This will help me to prompt user if a particular device is not present or is bearing a different device number than the one used in the software.
For this system I'm using PCI4060, PCI 6511 and DIO96. I am using LV7.0 and Win 2K & XP.
Thanks in advance for your help.
_Deepu

Hi,
you can make a scan of all the Daq devices by using the function: Get DAQ Device Information.vi that you find under the: Traditional Daq - calibration configuration palette.
See BD image attached. It scans for 16 devices and return a list of the found.
This seems to work only for Traditional Daq-compatible devices, no problem for PCI 6511 and DIO96.
I don't know if it works for the multimeter also; if not, you can make a basic call to the device at the beginning of the program and check for errors.
Alberto 
Attachments:
devices.jpg ‏8 KB

Similar Messages

  • I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work

    I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.

    Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files.   Some programs are also Versions aware, which offers a kind of restore capability by file.  Again needs to be setup before you start editing.
    Just a for-your-info:
    Mac is not an acronym, it is a nickname for Macintosh.

  • When you sighn in and out of an ios device some of the data fom the device sighned in stays after sighning out. Is this the same for PC and if so how do you delete all the data from my icloud from the pc

    When sighning in and out of an ios device some of the icloud data from the icloud account used to sighned in stays even after sighning out. Is it the same on pc icloud and if so how do you delete it. ( This is the online site by the way.)

    Hi turintest2
    Thanks for taking the time to respond - however your reply didn't really help as you haven't explained how to delete the compilation album that had been created.
    I managed to sort it out by doing the following (I'm posting this so that it may help others).  I don't know if this is the simplest/most elegant solution - but it works.
    In iTunes, find the compilation (in my case, the 153 songs) and, starting with the first song, follow this procedure:
    On the iPhone go to 'Songs' and scroll down the list until you find the first song that was listed in iTunes (above).  You should notice (as in my case) that the song will have the correct title (and artwork too if you'd found this previously before making the compliation) but the wring artist.
    Swipe LEFT and press the 'Delete' button.
    Repeat with second song in iTunes list, deleting the individual songs from the iPhone, one by one.
    Although tedious, this seemed to work for me.  Reason for doing down the iTunes list is that it is in a pseudo-alphabetical order and I wanted to make sure I'd got every one.
    Now busy re-importing the original albums from CD.
    Thank you APPLE for making this such a laborious process.  Why can't designers actually TEST the products they design so that they can appreciate first-hand the likely problems?
    Anyhow, thanks turintest2 for trying to help me - it was appreciated.
    RB

  • I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work.  How can I just get use the old i-tunes?

    I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work.  How can I just get use the old i-tunes?

    Hi,
    Not sure if any of you above have managed to solve your problem or not but after coming across this same problem myself today as I am currently 'sofa bound' I decided to make it my mission to find a way around it.
    Initially I did think, having ready what seemed like a million questions and people with the same problem, that the only way was to buy OS X 10.5 ... HOWEVER, no. In among all these threads I found a jewel - Download I Tunes 9.2.1 which gets rid of the download itunes 10 advert and allows you to then buy from itunes again :-)  I am now one very happy lady.
    I apologise to all those that dont have older versions of OS X that maybe wont support even this upgrade but certainly for those like me with just 4yr old lap tops at least it means it not longer means buying a new one.
    Hope this helps son very frustrated people like myself - so much for apple support!

  • How to insert the data which is present in the variable into the table

    Hi,
    Let's consider that I have one table and I have stored the table column names in one variable and their values in another variable.
    I want to insert the data that is present in the variables into the table.
    I tried the following way :
    Declare
    V_columns    Varchar2(50) := 'Empno';
    V_values       Number(10) := 101;
    Begin
    Insert Into Emp (V_columns) Values (V_values);
    End;
    The above procedure gives an error : PL?SQL : ORA-00904 : "V_COLUMNS": invalid identifier
    Using the Execute Immediate, we can insert the data which is present in the variables into the table.
    Is there any other way to insert the data which is present in the variable into the table..?
    Can anyone please give me the solution..?
    Thanks..

    plz use this...
    DECLARE
       v_columns   VARCHAR2 (50) := 'Empno';
       v_values    NUMBER (10)   := 101;
    BEGIN
       EXECUTE IMMEDIATE    'Insert Into Emp ('
                         || v_columns
                         || ') Values ('
                         || v_values
                         || ')';
       COMMIT;
    END;

  • On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH4373

  • Ihave tons of music on itunes , but everytime i try to select it says "the original file cannot be found, would you like to try and locate it" i have no idea what happened to all of my music  any tips? i have a dell windows vista..  thanks !

    I have tons of music on itunes , but everytime i try to select it says "the original file cannot be found, would you like to try and locate it" i have no idea what happened to all of my music  any tips? i have a dell windows vista..  thanks !

    Basically, the computer thinks the music is 'lost'. Follow the prompts and try to locate it. It should navigate to the files and redraw the links which should make that pop up go away

  • I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

    I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

    Yes, you can.
    This is a special feature of the AirPort Express 802.11n.  You will have to set it up "manually" to "enable Ethernet clients".
    If  your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
    If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

  • Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?

    Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
    I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.

    Hi,
    Creating package doesn't mean it will install the product,
    You will need to install the package now. Please follow the instructions mentioned in the below articles
    Creative Cloud Help | Creating or editing packages
    Creative Cloud Help | Deploying packages
    Please let me know if it doesn't help.
    Regards,
    Devendra

  • Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

    Hi
    Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message. 
    Cannot use file  for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
    Server does not have a dependency on it.
    CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
    Any help please
    kam
    KAMEL

    Hi Saurabh
    Exactly I have SQL SERVER 2012
    Failover Clustering   in windows server 2012 with two nodes with
    two instances and exactly I run them in the same server and each instance with
    three drives Backup, Data and log.   
    KAMEL

  • The "add a device" screen on the desktop does not exist.

    The "add a device" screen shown in all the tutorials does not exist on the desktop version of firefox. It is impossible to enter the sync code. There is only a big button "create account" there but i already have an account. The button "conect" generates a code, but there is no way to enter it on the phone. The whole thing is broken and complicated and impossible to understand. Sorry.

    Right. The problem is that you need to properly set up Sync.
    Click the button there, 'Set up Firefox Sync'. If you don't have an account select 'Create a new Account', otherwise at the bottom, 'I already have a Sync account' -> 'I don't have a device with me' -> complete all details -> continue -- and then you will see the 'Add a device' option in the Sync preferences pane.
    The setup is complicated, convoluted and not ideal, and it is being worked on, but that should resolve your issue.

  • My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

    My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Will over the air mirroring be available for iPad 2 to other devices than the AppleTV? Devices such as the Boxee Box?

    Hi there.
    I was just wondering if anyone knows if mirroring over the air will be available for the iPad 2 to other devices than the AppleTV?
    Devices such as the Boxee Box?
    Air Play works fine with the Boxee Box when viewing photos, videoes or listening to music, but what about mirroring?
    - Bubbi, Denmark

    If you feel so strongly about something, why not tell Apple directly through the provided link:  http://www.apple.com/feedback?

  • I am new to the iPhone 3G S. How do you transfer your information from your old smartphone to your iPhone? Like pictures, ringtones, and contacts?

    How do you transfer your information, like photos, ringtones, and contact information from my Blackberry Torch to my new iPhone 3G S? I am new to the iPhone and don't remember the website I was told at the store in order to do these task. I already registered my phone and set up an AppleID.

    Ringtones from another phone will not work on iphone.
    You will have to create iphone ringtones.  Google will find several ways to do this.
    Contacts, calendars,photos, etc should be on your computer.  From there you can sync them to iphone.

  • How do I scan for a virus? Internet won't often connect to facebook, google, youtube and many other websites while others connect fine.

    Serveral times a week I won't be able to connect with facebook, google, youtube and yahoo. Usually it will say:
    "Invalid URL The requested URL "/", is invalid. Reference #9.64070f17.1344033131.59fe68f5"
    I'm not even using a "/" in the address bar. I'll type in www.facebook.com and that message will pop up. There is also a little white page icon to the left of the address in the address bar. When I click on more info it says:
    "The site isn't using SSL. This icon displays for http:// sites. Most sites don’t need to use SSL because they don’t handle sensitive information. Avoid entering sensitive information, such as your credit card information or bank login information, on the page. If sensitive information is being requested on a site not using SSL, consider contacting the website owner."
    The same thing happens when I use Google Chrome or Safari. I'm up to date on all my updates. Sometime clearing my history works, but not always. Sometimes rebooting helps, but not always. Sometimes none of the websites mentioned will work. Sometimes only one mention won't work.
    Any suggestions?

    Aminiman:
    What make is the router?
    What are the firewall settings on your Vista? What puzzles me is that your steam connection is fine and yet you cannot browse the internet.
    I am sure you have right clicked on the system tray icon (wireless connection) and chose to repair the connection right?
    Axel F.
    Message was edited by: Axel Foley

Maybe you are looking for