How do I schedule street sweeping (e.g., 1st and 3rd Thursday) in calendar?

How do I schedule street sweeping (e.g., 1st and 3rd Thursday) in calendar? 

Apple doesn't offer this service.

Similar Messages

  • How to Call Center Opens at a diffrent times 1st and 3rd Tue. of the Month

    Hello all,
    I'm new to UCCX and doing my best to understand scripting. I've created a script that's is normally open 7am to 12pm closed from 12pm to 1pm for lunch then open from 1pm to 5pm then closed again until 7am.
    Now every 1st and 3rd Thursday of the month they open at 9am instead of 7am.
    How would like script something like this? Is this possible?
    Thanks in advance for the help.
    We are running UCCX version 8.5 and using the IPPA.

    Here's a solution that works with Enhanced.
    The solution is simple.  If today's Day of Week (DoW) is equal to the target DoW, then we jump backwards in time by one week, and if we're still in the same month, we repeat that process over and over again, until we have stepped back so far, we step into the previous month.  All along the way, keeping track of how many times we were able to jump back in the same month.  This becomes our instance counter and what we check to see if we are on the correct instance of the target DoW.
    Subflow Script
    Variables
    boolean is_matched = false
    Date today = d[now]
    Date date_crawler = d[now]
    int target_dow = 0
    int target_instance = 0
    int instance_counter = 0
    Script: system-date-instances.aef
    StartLABEL0:If (date_crawler.dow == target_dow) Then  True    Increment instance_counter    Do date_crawler.setDate(date_crawler.date - 7)    If (date_crawler.month == today.month) Then      True        Goto LABEL0      False  FalseSet is_matched = instance_counter == target_instanceEnd
    Caller Script
    Variables
    boolean is_third_thursday = false
    Script - main-aa.aef
    Start...the intro to your script.../* You will need to pass in two integers as input parameters: target_dow and target_instance *//* taget_dow can be 1 - 7 (Sunday - Saturday) *//* target_instance would be a number representing which DoW you are interested in *//* E.g., If I wanted to know if today is the third thursday in the month I would pass in: *//* target_dow = 5 and target_instance = 3 *//* You will need to get back one boolean as an output parameter: is_matched */is_third_thursday = Call Subflow(SCRIPT[system-date-instances.aef], is_matched)If (is_third_thursday)  True    ...use modified business hours...  False    ...use regular business hours......the rest of your script...End
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.
    Tags: first, second, third, fourth, sunday, monday, tuesday, wednesday, thursday, friday, saturday
    Message was edited by: Anthony Holloway - Adding tags

  • How can i tell the difference between a 1st and 2nd generation Nano?

    greetings. just purchased a Nano on eBay. the model # is MA107LL/A, 4GB. is this a first or second generation Nano? i also bought one with the model # MA426LL/A. is this a first or second generation Nano? thanks so much.

    A first generation Nano will be either black or white and is plastic on the front and metal on the back. A second generation Nano comes in a variety of colours and the body is made entirely from aluminium: Identifying different iPod models

  • How do I schedule an automator script to run at a certain time every day?

    How do I schedule an automator script to run at a certain time every day?
    This used to be done through iCalendar and this option is no longer available.
    How do I do this?
    --Kenoli

    Kenoli Oleari1 wrote:
    How do I schedule an automator script to run at a certain time every day?
    This used to be done through iCalendar and this option is no longer available.
    How do I do this?
    --Kenoli
    You can use lauchd to run the script.
    Here's an example of an Automator App that I have scheduled to run at 7am daily:
    You would save this as com.yourname.plist and put it the the Folder: ~/Library/LaunchAgents/ (then log out and back in, or reboot)
    (To run a workflow, change open to automator)
    (A nice GUI launchd editor is Lingon)
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>Label</key>
              <string>com.tonyt.EventReport</string>
              <key>ProgramArguments</key>
              <array>
                        <string>open</string>
                        <string>/Users/Tony/Library/Scripts/Events Report.app</string>
              </array>
              <key>StartCalendarInterval</key>
              <dict>
                        <key>Hour</key>
                        <integer>7</integer>
                        <key>Minute</key>
                        <integer>0</integer>
              </dict>
    </dict>
    </plist>

  • How do you get street view back on the iPhone 6.0

    i want to know how to get the street view back onto my maps

    See this article:
    Street View for Google Maps web app goes live

  • How do I schedule an email for future delivery on Mac mail client?

    How do I schedule an email for delivery at a future date/time on my Mac mail client?

    Hello DeeDubb11,
    Unfortunately, you cannot do that with the officially Mac Mail client.
    Best regards.

  • How do I schedule Sender FTP adapter?

    Hi.
    I have to run a number of weekly processes. I have to ensure that these processes are run night time only on thursdays.
    These processes suppose to read from FTP. How could I schedule BPM this way ?
    I tried to do it how it is described in the Siva Maranani's blog:
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1672. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    However it looks like FTP/FILE adapter can not be "read".
    What would be the other option for me ?
    Sincerely,
    Evgeny.

    Hi,
    You can schdule any adapter (not only FTP)
    1. Start the Runtime Workbench
    2. Display All Components
    3. Click on Adapter Engine
    4. Click on Communication Channel Monitoring
    5. Click on Availability Time Planning (upper right corner)
    You can create different schedules for all communication channels defined.
    Schedules can be of type daily, weekly, monthly or one-time. You can as well specify the start time, duration, etc. of each task
    KR - Danny.
    Message was edited by:
            Danny De Roovere
    Message was edited by:
            Danny De Roovere

  • How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform

    How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform
    I want to extract the freqency distribution, cycles per freqency, and samples per cylce of swept waveform, in order to output the same of swept waveform with I have acquired by NI DAQ card, tks!
    owen wan
    Attachments:
    Untitled 1.vi ‏2333 KB

    Look inside the palette called Signal Processing - Waveform measurements.  There are a lot of functions here that you can use to get the information you desire.  For instance, the Extract Tones function will output an array of clusters, with each cluster element giving the frequency, amplitude, and phase of the signal component.  Go through the entire arry to see each frequency component of the complex waveform.
    Also, in the Waveforms palette there is the Get Waveform Components function that will give you t0, dt, and Y components of the waveform.  1/dt should give you the sample rate.  See attached VI.
    - tbob
    Inventor of the WORM Global
    Attachments:
    WfmInfo.vi ‏4658 KB

  • How can I schedule my Bex report to execute in background

    My Bex program takes more than 20 mins to run and it always hangs up my PC especially when I am trying to do something else in EXCEL.
    How can I schedule to run the report in background, whether from BEX or anywhere as long as I can get the report output.
    Thanks

    Hi Colin.......
    Check this......
    Schedule Reports in BW
    Regards,
    Debjani.......

  • How do I schedule regular daily/weekly/monthly/quarterly data uploads?

    Hello gurus!
    How do I schedule regular daily/weekly/monthly/quarterly data uploads?  How can I make it "automatic"?
    Thank you very much!
    Philips

    Hi,
    There are lots of documents available on how to design a process chain. It is basically your requirement what is needed.
    for eg.. You have  a daily masterd ata loaded into BW from R/3 and then the transaction data. So we create a chain where in we create anothe meta chain (for Master data) and drag the option of Load IP ( give variant as ur IP name you have created for that Particluar master data) , same for texts and hierarchy, for hierarchy use save option after the hierarchy process. and then use a attribute change run proces step to activate the master data. and then create another meta chain that loads transactiond data. Normally you have a IP that loads data into ODS here from source system, so Use IP process for that , next a process step to activate the ODS data and then use another IP to send the data to a cube. If you have aggregates built on that cube, use roll up process to roll up the data.
    If you can gimme your mail ID , I can send some docu's on process chains
    Regards
    Srini

  • I want to know how to change schedule on Transport Requests

    Hi.
    I want to know how to change schedule Transport Requests.
    And the Transport requests has already approved by Transport Proposals.
    Now I tried to change schedule after re-creat Transport Request,it is same
    Transport Request Number.
    But I can't change schedule.
    Please help me!
    Thanks.
    Toshi

    In full editor, Image>Resize>image size. Be sure to check "Resample Image & Constrain proportions".
    You can also do it with the crop tool. On the tool's option bar, enter the resolution in the appropriate box.

  • )How can we schedule the info package daily run at 6 AM, with out useing in

    Hi
       Can any one explain 1) what is information broadcasting &how can we use this.
    2)What are the settings we have to do when we use the charts in WAD's
    3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
    Thanks
    Bharath

    Hi,
      Information broadcaster :
          you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
    have a look at the below link.
         http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
    Infopackage scheduling:
         you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
    Regards,
    Siva.

  • How to use scheduling in Mapping?

    Hi,
    can i use the schedular in Mapping?.
    I have created a schedule, but dont know how to use it in Mapping.
    Does anyone some ideas oder example.
    Thanks
    Mandi

    Hi Mandi
    You configure the mapping and set the 'Referred Calendar' property.
    See the viewlet below which does it (for Apps integration rather than database scheduler, but the steps are pretty much the same).
    http://www.oracle.com/technology/products/warehouse/htdocs/concmgr/owbconcurrentmanager_viewlet_swf.html
    Cheers
    David

  • HT2513 how do I schedule daily events in the same sequence

    How do I schedule daily events in the same sequence.

    Hello LeatherneckDevilDog,
    Thank you for the details of the issue you are experiencing with duplicate calendar entries.  I recommend reviewing the following articles to resolve issues with iCal duplicates:
    iCloud: Resolving duplicate calendars after setting up your calendar application for iCloud Calendar
    http://support.apple.com/kb/TS4118
    iCloud: Advanced Calendar and iCal troubleshooting
    http://support.apple.com/kb/TS4337
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How to de-schedule a background job?

    Dear all,
         I have scheduled a background ABAP report titled ZHRWFIT19 at SM36 to trigger a workflow.
         Initially I scheduled this background job to 9 A.M.
         Later I changed to schedule this background job to 10 A.M at SM37.
         Now my workflow triggers twice i.e., at 9 A.M. once and 10 A.M once.
         I want it to start at 10 A.M. only.Though I changed the schedule time to 9 A.M. to 10 A.M, still my background job triggers the
         workflow at 9 A.M. and 10 A.M.
         How to de-schedule this background report at 9 A.M.?
         Please suggest for which I will be grateful forever.
    Thanks and regards,
    S.Suresh

    Dear Shastri,
             Thank you so much for your reply.
             As you have rightly pointed, I have 2 entries with same background job at SM37.That's why my workflow triggers twice.Now I want to permanently delete the background job entry at SM37 which triggers my workflow at 9 A.M.
            I couldn't delete this entry at SM37 permanently.Please suggest me how to permanently delete the entry that triggers the workflow at 9 A.M., for which I will grateful.
    Thanks and regards,
    S.Suresh

Maybe you are looking for