How do i select last 5 minutes data from table

there is table called 'x' which has cron job set of interval=5 min,i want to select last 5 min data and delete rest of the data in it or save in one of the table say 'y'.how do i going to do it???kindly help out please??
Edited by: user10341747 on Sep 24, 2008 10:20 AM

this is just explanation of other members reply
insert into Y
select * from X where timestamp_variable between systimestamp - 5/(24*60) and systimestamp
this select gives last 5 min data out of that table x .
members can correct me if iam wrong.
Thank you.

Similar Messages

  • How do I selectively erase old data from old computers on my Time Capsule to make room for my new computer data?

    My new computer did one complete backup on the Time Capsule now I get the message that there is insufficient room to complete further backups.
    (128 GB available, my backup size is 170GB but the time capsule is 998GB)
    I suspect that information from old computers is there. How do I selectively remove that information or do I have to erase the whole Time Capsule and start over with my new computer and backup again?

    Check the info here.. but big warning .. it often fails.. if you want to keep your old backups archive them off the TC to USB drive.. then erase and start fresh clean backup.
    http://pondini.org/TM/Time_Capsule.html

  • How to export message body and data from Table to Excel from outlook 2010

    I usually get Employee announcement in emails and I need to compile excel sheet from all these emails to know change in status of employee from previous line to current line .
    Dear Concerned,
    The change in status of the following employee has been carried out as per following details:
    New Status
    Change in Job
    Effective Date
    01-Feb-2015
    Employee Name
    Ricky ponting
    Employee Code
    4982
    Designation
    Sourcing Executive (Secondment)
    Job Group
    1A
    Department
    Sourcing & Supply Chain
    Unit
    Technology Sourcing
    Division
    Finance
    Location
    sydney
    Reporting Line
    Mr Micheal king
    Note: Ricky Ponting  was previously working as
    Tariff Implementation Support Officer XYZ organization was reporting to
    Mr Robin Sing
    I need working code that export about HTML table data as well last Note : full line so that I can have an excel file of 2000 Employees whoes status have been changed and I can easily sort out from which previous line they were reporting to new line and I
    can get in touch with the new line for any Access rights re-authorization exercise on later stage .
    Currently i am using following code thats working fine with the table extraction but NOTE: line is not being fetched with the following code based on following URL
    https://techniclee.wordpress.com/2011/10/29/exporting-outlook-messages-to-excel/
    Const MACRO_NAME = "Export Messages to Excel (Rev Sajjad)"
    Private Sub ExportMessagesToExcel()
        Dim olkFld As Outlook.MAPIFolder, _
            olkMsg As Outlook.MailItem, _
            excApp As Object, _
            excWkb As Object, _
            excWks As Object, _
            arrCel As Variant, _
            varCel As Variant, _
            lngRow As Long, _
            intPtr As Integer, _
            intVer As Integer
        Set olkFld = Session.PickFolder
        If TypeName(olkFld) = "Nothing" Then
            MsgBox "You did not select a folder.  Operation cancelled.", vbCritical + vbOKOnly, MACRO_NAME
        Else
            intVer = GetOutlookVersion()
            Set excApp = CreateObject("Excel.Application")
            Set excWkb = excApp.Workbooks.Add
            Set excWks = excWkb.Worksheets(1)
            excApp.Visible = True
            With excWks
                .Cells(1, 1) = "Subject"
                .Cells(1, 2) = "Received"
                .Cells(1, 3) = "Sender"
                .Cells(1, 4) = "New Status"
                .Cells(1, 5) = "Effective Date"
                .Cells(1, 6) = "Employee Name"
                .Cells(1, 7) = "Employee Code"
                .Cells(1, 8) = "Designation"
                .Cells(1, 9) = "Job Group"
                .Cells(1, 10) = "Department"
                .Cells(1, 11) = "Unit"
                .Cells(1, 12) = "Division"
                .Cells(1, 13) = "Location"
                .Cells(1, 14) = "Reporting Line"
                .Cells(1, 15) = "Note:"
            End With
            lngRow = 2
            For Each olkMsg In olkFld.Items
                excWks.Cells(lngRow, 1) = olkMsg.Subject
                excWks.Cells(lngRow, 2) = olkMsg.ReceivedTime
                excWks.Cells(lngRow, 3) = GetSMTPAddress(olkMsg, intVer)
               For intPtr = LBound(arrCel) To UBound(arrCel)
                    Select Case Trim(arrCel(intPtr))
                        Case "New Status"
                            excWks.Cells(lngRow, 4) = arrCel(intPtr + 1)
                        Case "Effective Date"
                            excWks.Cells(lngRow, 5) = arrCel(intPtr + 1)
                        Case "Employee Name"
                            excWks.Cells(lngRow, 6) = arrCel(intPtr + 1)
                        Case "Employee Code"
                            excWks.Cells(lngRow, 7) = arrCel(intPtr + 1)
                        Case "Designation"
                            excWks.Cells(lngRow, 8) = arrCel(intPtr + 1)
                        Case "Job Group"
                            excWks.Cells(lngRow, 9) = arrCel(intPtr + 1)
                        Case "Department"
                            excWks.Cells(lngRow, 10) = arrCel(intPtr + 1)
                        Case "Unit"
                            excWks.Cells(lngRow, 11) = arrCel(intPtr + 1)
                        Case "Division"
                            excWks.Cells(lngRow, 12) = arrCel(intPtr + 1)
                        Case "Location"
                            excWks.Cells(lngRow, 13) = arrCel(intPtr + 1)
                        Case "Reporting Line"
                            excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
                        Case "Note:"
                            excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
                        End Select
                Next
                lngRow = lngRow + 1
            Next
            excWks.Columns("A:W").AutoFit
            excApp.Visible = True
            Set excWks = Nothing
            Set excWkb = Nothing
            Set excApp = Nothing
        End If
        Set olkFld = Nothing
    End Sub
    Private Function GetSMTPAddress(Item As Outlook.MailItem, intOutlookVersion As Integer) As String
        Dim olkSnd As Outlook.AddressEntry, olkEnt As Object
        On Error Resume Next
        Select Case intOutlookVersion
            Case Is < 14
                If Item.SenderEmailType = "EX" Then
                    GetSMTPAddress = SMTP2007(Item)
                Else
                    GetSMTPAddress = Item.SenderEmailAddress
                End If
            Case Else
                Set olkSnd = Item.Sender
                If olkSnd.AddressEntryUserType = olExchangeUserAddressEntry Then
                    Set olkEnt = olkSnd.GetExchangeUser
                    GetSMTPAddress = olkEnt.PrimarySmtpAddress
                Else
                    GetSMTPAddress = Item.SenderEmailAddress
                End If
        End Select
        On Error GoTo 0
        Set olkPrp = Nothing
        Set olkSnd = Nothing
        Set olkEnt = Nothing
    End Function
    Function GetOutlookVersion() As Integer
        Dim arrVer As Variant
        arrVer = Split(Outlook.Version, ".")
        GetOutlookVersion = arrVer(0)
    End Function
    Function SMTP2007(olkMsg As Outlook.MailItem) As String
        Dim olkPA As Outlook.PropertyAccessor
        On Error Resume Next
        Set olkPA = olkMsg.PropertyAccessor
        SMTP2007 = olkPA.GetProperty("http://schemas.microsoft.com/mapi/proptag/0x5D01001E")
        On Error GoTo 0
        Set olkPA = Nothing
    End Function
    Sub DebugLabels()
        Dim olkMsg As Outlook.MailItem, objFSO As Object, objFil As Object, strBuf As String, strPth As String, arrCel As Variant, intPtr As Integer
        strPth = Environ("USERPROFILE") & "\Documents\Debugging.txt"
        Set olkMsg = Application.ActiveExplorer.Selection(1)
        arrCel = Split(GetCells(olkMsg.HTMLBody), Chr(255))
        For intPtr = LBound(arrCel) To UBound(arrCel)
            strBuf = strBuf & StrZero(intPtr, 2) & vbTab & "*" & arrCel(intPtr) & "*" & vbCrLf
        Next
        Set objFSO = CreateObject("Scripting.FileSystemObject")
        Set objFil = objFSO.CreateTextFile(strPth)
        objFil.Write strBuf
        objFil.Close
        Set olkMsg = Application.CreateItem(olMailItem)
        With olkMsg
            .Recipients.Add "[email protected]"
            .Subject = "Debugging Info"
            .BodyFormat = olFormatPlain
            .Body = "The debugging info for the selected message is attached.  Please click Send to send this message to David."
            .Attachments.Add strPth
            .Display
        End With
        Set olkMsg = Nothing
        Set objFSO = Nothing
        Set objFil = Nothing
    End Sub
    Function StrZero(varNumber, intLength)
        Dim intItemLength
        If IsNumeric(varNumber) Then
            intItemLength = Len(CStr(Int(varNumber)))
            If intItemLength < intLength Then
                StrZero = String(intLength - intItemLength, "0") & varNumber
            Else
                StrZero = varNumber
            End If
        Else
            StrZero = varNumber
        End If
    End Function

    Dear Graham
    I am already big fan of yours and using mail to many Addin from years from word 2007 to Word 2010 :) and still loving it and I use it for access re-authorization from Lines for application accesses . I tried and finally got understanding of the Extract to
    mail Addin and after tweaking excel - Text To columns and other few things finally i was able to get the required data - from morning to now :) I am happy to see your provided guidance
    Thanks alot - by the way why your Mail to many add-in is so slow now these days :) previous versions usually help me send 1000 emails in 10 minutes now it takes long time :)

  • How i can get only required data from table by using CKM

    Hi...
    i have done one scenerio i.e get required data from one table into another table on basis of some condition by using CKM.
    Now i want same,but this time my target is file ,not RDBMS.
    so plz tell me procedure how i can get required data from source table into File on basis of some condition using CKM.
    thanks

    CKM checks for Constraints and Not Null condition. You can use IKM SQL to File and being that there is no option in IKM for CKM .
    The other method is you can declare those Not null and other condition as Filter in the Source Datastore, that should filter out records that you are not willing to move to files.

  • How to do selectable filtering of output from table-function

    Hi - I have been looking carefully but can't see the answer to my question in the forums so I have had to resort to asking!  Apologies if this is covered elsewhere - my newbie state indicates I am fumbling in the dark here!
    I have a report which comes from a table-function.  This produces hundreds of lines of output which the user would like to be able to select and then export just the subset of lines.
    Looking at the Forum's (this article and this one) this seems possible if you are working with a table where you can re-query the original dataset with just a specific rowset required however as the table-function is generating output on the fly it is hard to rerun the query to reselect the same output for redisplay.  Also most of the reports are working with interactive reports - whilst this is just static output.
    Is there a way to redisplay the information which has already been shown in an filtered way with check boxes?
    Is there then a way to have hidden fields which are not shown when the check boxes are selected but which can be shown in the "filtered" view?
    I am using Apex 4.0 at the moment on an Oracle 10g instance.
    Many thanks in advance for any assistance.
    Malcolm

    I got a soluce with no swap.
    I created a new column (E)
    In E2, the formula is :
    =B&IF(ISBLANK(A),"",MONTH(A))
    Apply Fill Down
    In table of each company, I inserted a 2nd header row so that I may store the name of the company in A1.
    In A3, the formula is :
    =IFERROR(OFFSET(Tableau 1 :: $A$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
    in B3, the formula is :
    =IFERROR(OFFSET(Tableau 1 :: $D$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
    Select A3:B3 then Fill Down.
    That's all folks !
    Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:18:32
    Please :
    Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How do I duplicate all my data from my existing Macbook to a new Macbook that I purchased last night?

    How do I duplicate all my data from my existing Macbook to a new Macbook?

    Easiest way is to connect them together and use Migration Assistant (which comes with all Macs).
    To connect them, use one of the following:
    ethernet cable
    firewire cable
    Apple Thunderbolt-Firewire Adapter + firewire cable (if your new Mac has Thunderbolt but your old Mac has FireWire)
    thunderbolt cable (if both Macs have Thunderbolt)
    network (wired or wireless)
    Do not use a USB cable!

  • How to find the Last modified date and time of a package

    Hi,
    We need a clarification on how to find the Last modified date and time of a package in Oracle. We used the example below to explain our scenario,
    Lets consider the following example
    Let A, B be two packages.
    Package A calls the package B. So A is dependent on B.
    When A is compiled the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated.
    Now there a modification in package B so it is compiled. There is no modification in package A.
    Now when the package A is executed the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated but we did not make any change in Package A. Now we need to find last modified date and time of the package A . So we can not rely on the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS . Can u please tell us any other solution to get last modified date and time of the package A .
    Regards,
    Vijayanand.C

    Here is an example:
    SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
    2 WHERE OBJECT_NAME = ANY('A','B');
    OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
    A 20-MAY-2004 10:57:32 20-MAY-2004 10:57:32 2004-05-20:10:57:32 VALID
    B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 VALID
    SQL> CREATE OR REPLACE PROCEDURE A AS
    2 BEGIN
    3 NULL;
    4 NULL;
    5 END;
    6 /
    Procedure created.
    SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
    2 WHERE OBJECT_NAME = ANY('A','B');
    OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
    A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
    B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 INVALID
    SQL> EXEC B
    PL/SQL procedure successfully completed.
    SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
    2 WHERE OBJECT_NAME = ANY('A','B');
    OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
    A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
    B 20-MAY-2004 10:58:22 20-MAY-2004 11:01:53 2004-05-20:11:01:53 VALID
    Note that the date under the column 'created' only changes when you really create or replace the procedure.
    Hence you can use the column 'created' of 'user_objects'.

  • How to find the last update date time and user of record field peoplecode

    how to find the last update date time record field peoplecode?
    Thank you.

    One can check the last update date time using the following query
    SELECT LASTUPDDTTM FROM PSPCMPROG WHERE OBJECTVALUE1 LIKE 'RECNAME' AND OBJECTVALUE2 LIKE 'FIELDNAME'

  • How to find the last modified date of a workflow.

    How to find the last modified date of a workflow.
    thanks.

    Hi,
    There is nothing as standard that does this - you could write some code to determine the latest begin_date from each of the workflow tables and assume that this was the last time that the definition changed.
    What you need is something like this:
    select max(wfa.begin_date)
    from   wf_process_activities  wpa
    ,      wf_activities          wfa
    ,      wf_item_types_tl       wit
    where  wpa.activity_item_type = wfa.item_type
    and    wpa.activity_name      = wfa.name
    and    wfa.version            = (select max(version) from wf_activities wfa1 where wpa.activity_item_type = wfa1.item_type and wpa.activity_name = wfa1.name )
    and    wpa.process_item_type  = 'your item type'
    and    wpa.process_item_type  = wit.namewhich I think gives what you want.
    HTH,
    Matt
    Alpha review chapters from my book "Developing With Oracle Workflow" are available on my website:
    http://www.workflowfaq.com
    http://forum.workflowfaq.com
    NEW! - WorkflowFAQ Blog at http://thoughts.workflowfaq.com

  • Oracle - How  do i  find last 18 months from sysdate

    How do i find last 18 months from sysdate as Month Date and year (i.e MMDDYYY)

    SELECT to_char(sysdate,'MMDDYYYY') "Today", TO_CHAR(ADD_MONTHS(sysdate,-18), 'MMDDYYYY') "-18th Month" from dual;
    Today -18th Mo
    10212008 04212007

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • How to populate data from table into datagrid in form

    hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks

    Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
    Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

  • How to transfer a set of data from Excel spread sheet to an Access database

    hi,
    Can any one please tell me how to transfer a set of data from Excel spread sheet to an Access database using SQL query.I'm using java API currently. I have done all sorts of ODBC connection in administrative tools.The file is in correct location. I have done certain coding but with errors.Help me to get rid of these errors,
    Coding:*
    try
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection datacon=DriverManager.getConnection("jdbc:odbc:exdata","",""); *//For Excel driver*
    Connection datacon1=DriverManager.getConnection("jdbc:odbc:stock1","",""); *// For mdb driver*
    Statement datast=datacon.createStatement();
    Statement datast1=datacon1.createStatement();
    ResultSet excelrs=datast.executeQuery("select item_code,sdata,closing_stock from phy "); *//phy is the excel file*
    while(excelrs.next())
    String ic=excelrs.getString("item_code");
    System.out.println(ic);
    String d=excelrs.getString("sdate");
    double cs=excelrs.getDouble("closing_stock");
    int dbrs=datast1.executeUpdate("insert into second values('"+ic+"','"+d+"',"+cs+")"); *//second is the mdb*
    excelrs.close();
    }catch(Exception e)
    System.out.println(e);
    Error:*
    java.sql.SQLException: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'C:\JavaGreen\phy.xls'. Make sure the object exists and that you spell its name and the path name correctly.
    thanks,
    kumar.

    JAVA_GREEN wrote:
    No i haven't mixed up.But the file from where i have to retrieve the data is in csv format.Even though i created another csv driver.and tried but i cud not find a solution to load/transfer a set of records from one file(in Excel/csv format) to another file(in mdb format).plz help me.Is there any other methods for this data transfer.A csv file is NOT an excel file.
    The fact that Excel can import a csv file doesn't make it an excel file.
    If you have a csv file then you must use a csv driver or just use other code (not jdbc) to access it. There is, normally, a ODBC (nothing to do with java) text driver that can do that.

  • How to track the flow of data from R/2 to BI ?

    Hi Experts,
    Question: How to track the flow of data from R/3 to BI ?
    I want to load master data from R/3 to BI. In BI, i create an infopackage to load data from R/3. Under processing tab i set it as "PSA and then in the InfoObject (package by package)". Its a Full update.
    Now, i start the update to InfoObject. The load goes on well.
    Now, i want to track the flow of data from the master data table in R/3 to Datasource in R/3 then Extractors and then in the PSA in BI and then till the InfoObject. That is the complete flow of data from source table (in R/3) to Target table (in BI).
    Please help me know how this can be done. (For example lets take cost element master data)
    Regards,
    Suraj S Nair

    Hi,
    Data flow :
    BW :
    When u right click on the Master Data Info object -> Select Data flow.Then  it will  show u the details like DS name,IS (If 3.x)
    Once u know the DS then you need to find out the source tables for the R/3 DS.This information will get using ROOSOURCE or ROOSFIELD tables  or help.sap.com.
    My suggestion better to search in Help site for DS source tables.
    DS Tables :
    The following link will provide you the source tables for some of the LO DS.
    https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
    Regards
    Ram.
    Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 9:29 AM

  • Select DBase (.dbf) data from Oracle on Linux

    How to select DBase (.dbf) data from Oracle on Linux ?
    dbf files connected to Linux form NetWare server as 'ncpmount'.
    Oracle has access as oracle 'Directory' object.

    If you have an ODBC driver for it and are using Oracle 10g you can use Generic Connectivity. For more information on Generic Connectivity refer to the Chap 7 of the Heterogeneous Connectivity Administrator's Guide.
    http://download-west.oracle.com/docs/cd/B13789_01/server.101/b10764/gencon.htm#1005900

Maybe you are looking for