How to do selectable filtering of output from table-function

Hi - I have been looking carefully but can't see the answer to my question in the forums so I have had to resort to asking!  Apologies if this is covered elsewhere - my newbie state indicates I am fumbling in the dark here!
I have a report which comes from a table-function.  This produces hundreds of lines of output which the user would like to be able to select and then export just the subset of lines.
Looking at the Forum's (this article and this one) this seems possible if you are working with a table where you can re-query the original dataset with just a specific rowset required however as the table-function is generating output on the fly it is hard to rerun the query to reselect the same output for redisplay.  Also most of the reports are working with interactive reports - whilst this is just static output.
Is there a way to redisplay the information which has already been shown in an filtered way with check boxes?
Is there then a way to have hidden fields which are not shown when the check boxes are selected but which can be shown in the "filtered" view?
I am using Apex 4.0 at the moment on an Oracle 10g instance.
Many thanks in advance for any assistance.
Malcolm

I got a soluce with no swap.
I created a new column (E)
In E2, the formula is :
=B&IF(ISBLANK(A),"",MONTH(A))
Apply Fill Down
In table of each company, I inserted a 2nd header row so that I may store the name of the company in A1.
In A3, the formula is :
=IFERROR(OFFSET(Tableau 1 :: $A$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
in B3, the formula is :
=IFERROR(OFFSET(Tableau 1 :: $D$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
Select A3:B3 then Fill Down.
That's all folks !
Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:18:32
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Similar Messages

  • Output from tables which I mention in select options of the screen as input

    Dear All,
    I want to fetch the data in the form of output from tables which I will mention in select options of the screen as input.
    In selection screen option if I write any table name then how can i select this table in select query of ABAP program ?.
    I may select any tables in select options of screen. But In select query I should get that table name automatically.. How ?
    e.g. If i put table name as an input i.e.  MARA  in select option .
    In program how to write select query to get records from that table ?
    SELECT MTART MATKL from MARA
    Every time I should not go to select query of program  & replace the tablename.
    How to solve this problem ?

    Hi,
    PARAMETERS p_table(30)." type string.
    "This is a Tested code Just Execute and Check
    START-OF-SELECTION.
      DATA: lt_tmp TYPE REF TO data.
      DATA : line TYPE REF TO data.
      FIELD-SYMBOLS: <lt_tmp> TYPE STANDARD TABLE, <wa>, <dyn_field>.
      CREATE DATA lt_tmp TYPE STANDARD TABLE OF (p_table).
      ASSIGN lt_tmp->* TO <lt_tmp> .
      CREATE DATA line LIKE LINE OF <lt_tmp>.
      ASSIGN line->* TO <wa>.
      SELECT * FROM (p_table) INTO TABLE <lt_tmp>.
      IF sy-subrc = 0.
        LOOP AT <lt_tmp> ASSIGNING <wa>.
          DO.
            ASSIGN COMPONENT  sy-index
               OF STRUCTURE <wa> TO <dyn_field>.
            IF sy-subrc NE 0.
              EXIT.
            ENDIF.
            IF sy-index = 1.
              WRITE:/ <dyn_field>.
            ELSE.
              WRITE: <dyn_field>.
            ENDIF.
          ENDDO.
        ENDLOOP.
      ENDIF.
    Cheerz
    Ram

  • How can I select to send an from another email account within the inserted gmail account?

    How can I select to send an from another email account within the inserted gmail account?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The MAS should use any credits first and then apply the remainder to a listed bank card.

  • How to get selected  row index  of a Table ?

    hi gurus,I'm new  to Webdynpro for abap
    I'm displaying    just Flight details in a Table  so
    how to get selected  row index  of a  Table  and need  to be display in Message manager.

    Hi,
    For getting the row index use the following code.
    DATA lo_nd_node TYPE REF TO if_wd_context_node.
      DATA lo_el_node TYPE REF TO if_wd_context_element.
      DATA index TYPE i.
    * navigate from <CONTEXT> to <NODE> via lead selection
      lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_node ).
      lo_el_node = lo_nd_node->get_lead_selection(  ).
      index = lo_el_node->get_index( ).
    node is the name of the node which is binded to the table.
    For printing the message u can use code wizard.
    Press ctrl-F7. Now Select generate message.
    IN this select the method  REPORT_SUCCESS
    In the code now u can give index to Message text Exporting parameter. Comment receiving parameter.
    Write the whole code in onLeadSelect of the table.
    Regards,
    Pankaj Aggarwal

  • How to assign select-option values to internal table

    hi all,
    how to assign select-option values to internal table
    thanks in advance.

    Hi,
    You just need to loop at your select-option field and take the values from low and high fields.
    for. e.g
    loop at s_werks .
    move:s_werks-low to <your itab>
    if not s_werks-high is initial .
    move: s_werks-high to <youritab>
    endif .
    append <your itab>
    endloop .
    OR use select statement.
    regards,
    Omkar.
    Message was edited by:
            Omkaram Yanamala
    Message was edited by:
            Omkaram Yanamala

  • Selecting a single row from table control of standard transaction via repor

    Hi Experts,
    I have a requirement of selecting a single row from standard trasaction via ineractive report.
    For eg. for a given document number & item number, how can i select the specified item from transaction VA03.
    I am using call transaction to naviagate to the screen but unable to select the specified item.
    thanks in adavance for your Help.

    You mean selecting the item via BDC?
    Have you tried something like:
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(01)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    or whatever your dynpro is to select the first row?

  • How can we delete wild card entry from table

    how can we delete wild card entry from table
    i want adjust the seeting for order type print out form
    like in 0id2 i have specified ordertupe nad print form in pm module
    but in oid3 fro palnner group if i make star it is not taking specific defiend field

    Hi....
       Follow these steps....
    1. Goto se16 and enter ur table name.. press F7 you can get selection screen now press F8...
    2. Click one perticuler record that u want to delete.. and press Change icon in App'toll bar...
    3. enter ?H at command field and again press enter...
    4. switch into classical debugger...
    5. write CODE at field ... it will gives EDIT as value...
    6. Change that EDIT into SHOW and press pencel icon just beside the SHOW...
    7. Now press F8...
    8. you can get delete option over there...
    Thanks,
    Naveen.I

  • How do i select a particular cell from a AbstractTableModel?

    I m using abstractTableModel to create my table. My table display 4 columns of different info, now i can capture my info from the other window and compare the value with my table but i don't know how to highlight/or select the particular rows in table.

    Hi,
    as I said before, the changeSelection(...) method of JTable will setup it's ListSelectionModel so that the row, you want, gets selected/highlighted:
    yourTable.changeSelection(row,0,false,false);
    will select a certain cell - but if selection of a single cell is not allowed and row selection is allowed, the whole row will be selected this way. You can allow selection of a single cell, selection of a column, selection of a row, or simultaneous selection of column and row at the same time. You can have single selection and multi selection.
    Hope this helps
    greetings Marsian

  • How do I selectively erase old data from old computers on my Time Capsule to make room for my new computer data?

    My new computer did one complete backup on the Time Capsule now I get the message that there is insufficient room to complete further backups.
    (128 GB available, my backup size is 170GB but the time capsule is 998GB)
    I suspect that information from old computers is there. How do I selectively remove that information or do I have to erase the whole Time Capsule and start over with my new computer and backup again?

    Check the info here.. but big warning .. it often fails.. if you want to keep your old backups archive them off the TC to USB drive.. then erase and start fresh clean backup.
    http://pondini.org/TM/Time_Capsule.html

  • How can I connect my svideo output from my camcorder to my Macbook pro retina?

    How cn I connect the s video output from my camcorder to my 13" macbook pro retina?

    Buy a video to USB converter.
    Buy a more expensive video to Firewire converter (it may give better quality).
    Find an older mini DV camera with 'video in' to make transfers to tape to capture from.

  • How do I keep a digital output from SCC DO01 from fluctuating states?

    Background: Hooking an ohm-meter across a digital output from a SCC DO01 isolated optical switch shows that the resistance fluctuates and at times goes open circuit. It appears directly related to the LabView code where I'm writing to this digital line within a WHILE loop. The loop has a variety of other operations going on. These other operations, I believe, are causing this problem due to timing or something.
    How can I improve the reliability of this digital output? There must be some method of establishing priority within a WHILE loop.
    Really appreciate the help.
    Hunter

    Howdy, Justin
    Thanks for your reply.
    I've actually been connecting the meter across Vss and Vout. Actuating the digital output, I can see the state of the switch. Attached is the VI which involves this DO01, specifically, it's associated with the VFD RUN/STOP.
    Since I sent this question out, I've actually gotten some help from Andy Watchorn of NI. This switch holds state much better.
    All the best,
    Hunter
    Attachments:
    VFD_ControlVIs.zip ‏120 KB

  • How to select odd/even rows from table....

    How to select odd/even rows from a table?
    Please help.
    Edited by: vaibhav on May 7, 2012 5:30 AM

    just don't expect the results to come out in the sequence odd, even, odd, even .....
    The answer you have marked correct needs two order by clauses to guarantee that.
    The inner select will return rows in a random order, potentially different each time you run it. The outer select may not return rows in the same order as the inner one.

  • How i can Select characteristics range like From To in COPA Report

    HI,
    I am creating copa report, I want to know how i can select characteristics with range like From / To.
    e g i want to give period range from 001 To 002 Etc.
    how it is possible while creating COPA report with report painter. (KE31)
    Thanks
    Nilesh

    Hi,
    see SAPNET note 516557.
    Best regards, Christian

  • How to retrive the Direct purchase entries from table level? S_ALR_87012050

    Hi All
    In our current project we need to retrieve the direct purchase report from table level. Can you please provide me the direct purchase related table? Normally we are executing the standard report S_ALR_87012050
    to extract the direct purchase entries. We need to know which table has the direct purchase entries.
    Regards
    K.Gunasekar

    K,
    Your problem description is still insufficiently detailed.
    It appears now that you are searching for asset numbers.  Please confirm.
    Your selection criteria "Inventory Number NE 0" doesn't appear to make much sense.  Inventory number is not a quantity, it is the name of an object.  I guess it is meaningful you have some inventory numbers named as '0'.  I don't think this setting is causing your problem though.....
    You didn't mention which table you accessed to discover that you had a perceived discrepancy.  Which table did you browse to see the results you mentioned?  Please describe the selection parameters for each table you reviewed, and the results for each table that you examined.
    It is also the practice of many companies to archive asset data.  If this is the case in your company, then the archived data will not reside in the 'A*" tables.
    You mentioned that you used the same parameters to select the data.  How did you select "Report Date" when you did the table extract?  I am not aware of a field that is named "report date' in any of the tables mentioned.
    Rather than slog through tables, you might want to try SE16, view "V_ANLAZ".  This is a preconstructed linkage of ANLA and ANLZ that is used by S_ALR_87012050 as a starting point.
    I really think you should consult with your ABAPers.  In two minutes they can give you your answers.  It will take me several messages and probably several days to get you the same answers.
    Best Regards,
    DB49

  • How to get only current exception message from tables

    Hi
    In my sceanario , I want to have the list of Current MRP exception messages list from table
    I understand that MRP detailed lists, including all exception messages, are stored in transparent table MDKP and cluster table MDTC.
    I can tell ABAPer to write a report for me , to read the data from these tables , but I guess these tables contain old exception message also , which are not currently appearing in MRP list
    How to get only current exception message
    Rgds,
    sandeep

    Sandeep,
    MDTC contains only data from the most recent MRP run.  So, all messages you see are those which are currently valid.
    The messages might have first appeared during a previous run, but they still need to be addressed.
    Before you invest a lot of time and effort into writing and debugging a custom report, you should probably try to use the standard SAP functionality found in MD06.  On the Processing indicator tab, you can select "Only with new exceptions".  Here you can tag a material/plant as 'processed', and thereafter, the exceptions that existed there before you tagged the part will not be re-displayed.
    Best Regards,
    DB49

Maybe you are looking for