How do I send a command to a Line Scan camera?

Hi,
I am using the Measurement & Automation Explorer and I would like how to send a camera setting to a line scan camera that uses NI-IMAQ. Any one have any suggestions?
-Chris

What I am trying to do is send a serial command to the camera using the Measurement & Automation Explorer. I am also using the PCIe - 1429 framgrabber. Any know how to acheive this? Is this even possible using the NI software?
-Chris

Similar Messages

How do I send a command to run a program on a remote computer

I am trying to use the TCP vi's to send a command to a remote computer on our local area network, so that a program runs on that remote computer. How do I do this, if possible?

Set one server VI on the remote computer to LISTEN (create listener / wait on listener) continuously for one port. When it receive something, READ the string and see if it is the one that you are expecting. On your computer, set a client VI, which first CONNECT (open connection) to the remote computer (using remote's IP and port number) and then it SENDs a string containing the command.
Hope it helps.
p.s.: Uppercase words name the Vis that you should use for this application.

How can I send Scroling commands from action script?

I just set both horizontalScrollPolicy and verticalScrollPolicy off, and I wont that the picture will scroll down when the user move his mouse to the bottom of the screen, I created mouse event that shows me mouse coordination in a text bar all what I have left to do is to give the scrolling command, just can't find it, so I am asking your help, hope you will.

See the Capabilities class to examine the screen resolution:
The Capabilities class provides properties that describe the system and
player that are hosting a SWF file. For example, a mobile phone's screen might
be 100 square pixels, black and white, whereas a PC screen might be 1000 square
pixels, color. By using the Capabilities object to determine what type of device
a user has, you can provide appropriate content to as many users as possible.
When you know the device's capabilities, you can tell the server to send the
appropriate SWF files or tell the SWF file to alter its presentation.
For example, here is how you can check the user's screen resolution:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="init();">
<mx:Script>
    <![CDATA[
      private function init():void{
        trace("screenResolutionX: " + Capabilities.screenResolutionX);
        trace("screenResolutionY: " + Capabilities.screenResolutionY);
    ]]>
</mx:Script>
</mx:Application>

How can I send a command in a selstor terminal

'am sending one program. In this there is 175 and 125. Two U8 numbers you can see. You can see a less than or equal and greater than or equal condition.
So I want to send 125 as soon as lesser than equal comes. But if a condition comes that value is greater than or equal at a time I clicked the reverse button. The translation should send 175 and makes the value equal to initial value and afterwards it should satisfy the lesser than or equal condition. Means when I click the reverse button, there may be two conditions the observed value is reater than the initial value . I such a condition, the translation should obey the command 175 and makes it to equal to initial value, afterwards it should obey the 125 condition. Please kindly help me.
Attachments:
the program for translation stage control.vi ‏102 KB

First place you should go is the manufacturer of the cards and see what they have to say. Do they have a DLL or ActiveX component that you can use to communicate with, is it documented, will they provide the documentation, etc.?

How can I send in my iPod to get my camera fixed

Camera won't work I've done everything I could and still is broken

https://selfsolve.apple.com/agreementWarrantyDynamic.do

How Do You Send the END KEY via Serial?

Hello All,
I'm trying to do something that would seem simple, but is not because almost no information about the END KEY on keyboards is posted online. Essentially, I'm trying to activate a device that comes out of sleep when someone presses the END KEY through hyperterminal or some ascii based command window. I'm trying to send that END KEY automatically using Labview, but I'm stuck. So here are my questions.
Does the END KEY have a specific ASCII number? I'm getting 2 different answers in my search for this one.
If it doesn't, how do I send that command over the serial communications line?
If it does, then what's the best way to convert it to something that labview understands as the END KEY, and not some combo of characters?
Thanks a bunch.
Matt

You would have to find out the character that is mapped to the END key and simply send that out the serial port. You may want to try sending 0x4f". At least this is what I found for the mapping of the END key.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How can I pass system commands from a java program? Urgent!

hi,
I have been trying this out since a long time. How do I send system commands to command.com or cmd.exe from a java program and an output of the executed command back to the java application.
If u have any idea, or have any information about the kind os application reply back.
Thanks
Deepa Datar

This is the code which I tried, but it displays only the title of MS-DOS, something like " Microsoft Corp...etc ". But doesn't take any input, and the subprocess(cmd.exe) hangs.
import java.io.*;
public class cmddemo2
public static void main(String arg[])
try
System.out.println("cmd");
Process p=Runtime.getRuntime().exec("cmd.exe");
DataInputStream din=new DataInputStream(p.getInputStream());
DataOutputStream dout=new DataOutputStream(p.getOutputStream());
System.out.println("after streams");
String s;
dout.writeChars("type cmddemo2.java");
while((s=din.readLine())!="\n")
System.out.println(s);
dout.writeChars("dir");
String s1;
while((s1=din.readLine())!="\n")
System.out.println(s1);
System.out.println("over");
catch(Exception e)
{ System.out.println("Exception : "+e);

How do i send an e-mail after it is scanned?

How do I send an e-mail after I scanned the document?

Hello!!
You can open your email, then click on add attachments and then search for your scanned document, should be in the my scans folder in your my documents if you are using windows. When you find the document and attach it to your email just hit send on your email.
I am a HP employee.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How can i use PCIe 1433 and basler line camera to construct image and pocess it?

hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
The framegrabber needs to be configured to understand how to communicate with the camera. You need a file from the camera vendor. This file might already be installed. You can use MAX to check if it is, under Devices/IMAQ.
Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
Since the camera is a line scan camera, it captures image data one pixel ine at a time. You will need to configure the frame grabber to determine how many lines per image you want. The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
Sorry, but there is no way to condense years into one post.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

How can I send multiple string commands into a VISA write?

Hi Fellow LabVIEW users
I am very new to LabVIEW (2.5 months) so please forgive me if my lingo is not up to par.
How can I send multiple string commands to a VISA write. For example each string command looks like this
1) 3A00 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0033 (Scenario 1)
2) 3A01 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0034 (Scenario 2)
3) 3A01 0000 0000 33FF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0067 (Scenario 3).
and so on and so forth. And there are a number of scenarios.
Each String scenario will give a different string output which will be interpreted differently in the front panel.
Right now I have to manually change the string commands on the front panel to give me the desired output. How can I do this without manually changing the commands i.e. hard coding each scenario into the block diagram?
Thanks, any feedback will help.
mhaque

Please stick to your original post.

Since upgrading to Firefox 4.0 I keep getting the error message "THERE WAS APROBLEM SENDING THE COMMAND TO THE PROGRAM", please can you advise how I get it to stop?

I have just upgraded to Firefox 4.0 and ever since then I get this message when I try to go to either Yahoo or Gmail
"THERE WAS A PROBLEM SENDING THE COMMAND TO THE PROGRAM",
I had this problem a month or so ago so downgraded to Firefox 3.6 and the problem went away but have now been advised to upgrade which indeed I have and hey presto the error message again, please how can I fix it??

OK, you seem to be running Zone Alarm as your firewall. It includes a utility which checks to see whether a site is safe or not and also adds a plugin to Firefox which is listed as '''npFFApi'''. Can you disable that and see if it makes any difference?
To get to the plugins manager, click the orange Firefox button, then click "Add-ons". In the page that opens, click the "Plugins" link on the left which will open the menu. Then find '''npFFApi '''and click the "''Disable''" button.

How to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe

Hello, everyone. Using VC++, I have gotten the handle of a *.exe(built by Labview), but I cannot get the button handle. I want to get the button handle and post the message to control the button. How can I do that? When I use the SPY++, the *.exe(built by Labview) have not any child windows which is very different from the *.exe(built by VC++). In SPY++, what is the LVDChild class? How can I send the message to control the button on *.exe(built by Labview)???
That is to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe. How can I get it ?
Thank you!

hummingbird wrote:
Thank you! But I dont kown how to use vi server to raise a value signalling event. Can we put vi server into the vc program? Can you give me some more information or some examples, hehe!
hummingbird
Checkout the LabVIEW ActiveX server interface in the User Manual in Chapter 20, Windows Connectivity and the VI Server Reference in Chapter 17, Programmatically Controlling VIs.
There is a sample for Visual Basic under examples/comm/VBtoLV.frm, which should be quite simple to translate to Visual C as long as you can figure out the basics of ActiveX programming in VC (I have never done anything with ActiveX in VC). For those basics I would recommend some text book or MSDN.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

JDev TP4 DVT:Map Component: How to send a command to Mapviewer Server?

How to send a command to Mapviewer Server programmatically using a DVT:Map component? ( for example : To capture a Theme info when i clicking in the a map theme position?
Juan C LLanes

Hi Juan,
Are you trying to click on a point in the map and update another control on the page?
This is available today, if you create a master-detail binding and bind the master to your map theme, and detail to another view e.g. a table, and check the checkbox "Enable row selection" when you create the map theme binding, then you will get this behavior automatically.
If this is not what you are looking for, please clarify.
Thanks
Katia

Since upgrading to 4.0 I've been receiving irritating messages every time I click through via a link embedded in a document or an email. The message says "An error occurred in sending the command to the application". How can I remove it?

Since upgrading to Firefox 4.0 I've been receiving irritating messages every time I click through via a link embedded in a document or an email. The message says "An error occurred in sending the command to the application". How can I remove it?

Certainly!
This is the module in our eMac 1.42:
1GB PC2700 DDR 333MHz CAS 2.5 184 Pin DIMM
The vendor, Other World Computing, ships to the UK but I suspect the shipping would make it pricy. I also trust this vendor:
Apple G4 eMac 1.42GHz (184 Pin PC2700 DDR DIMMs)
Between the two vendor's description, you should have a good idea of the Specs
PPC Macs do not like hi-density PC RAM. That's why I linked these two; they send the right stuff to Mac users.
Crucial UK is usually cited as good but, like their US counterpart, seldom go against Apple's outdated specs. See:
http://www.crucial.com/uk/store/listparts.aspx?model=eMac%20(1.42GHz)&Cat=RAM
They show the max RAM for your model as 1GB--yesterday's news. However, if you order their offering for a G5 iMac, you get the larger modules. Here is a listing for a 2GB kit (2 x 1GB modules) of the right config:
http://www.crucial.com/uk/store/listparts.aspx?model=iMac%20(G5-1.8GHz%2C%2020-i nch)&Cat=RAM
Hope this didn't muddy the water!
Allan

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I've just seen this message for the first time and it's showing on 10 devices.
What I really love about Apple Configurator is the copious amount of context driven help offered to you.
"Unable to send ClearPasscode command to device.
The device was disconnected.
Check the USB connection to the device."

How do I send a command to a Line Scan camera?

Similar Messages

Maybe you are looking for