How do I set a punch-in point without a punch-out point?

I'm recording an audiobook and I need to set a specific punch-in point where I mess up and then I'd like to continue recording without setting a punch-out point. All I've been able to find so far is punching-in on the fly, but I don't want to do that because I need the punch in point at a specific spot, and I need to be focused on the text and hearing how I was reading it, no focused on pressing record at the right spot. There's got to be a way to turn off the punch-out point using the auto punch... right?

shawn8090 wrote:
There's got to be a way to turn off the punch-out point using the auto punch... right?
Hi
'fraid not.... your only solution would be to set the punch out point far enough 'to the right' so that it becomes irrelevant
CCT

Similar Messages

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

How do i set up a itunes account without a credit card

how do i set up a itunes account without a credit card? I'm in Canada and it does not give me the "none" option.

Do they sell itunes (gift) cards in Canada? If so,buy one amd redeem.

How do I set up an apple id without entering a credit card number? I only want to use giftcards on my account.

How do I set up an apple id without entering a credit card number? I only want to use apple gift cards.

http://support.apple.com/kb/HT2534
See if this helps.
Make sure you're not signed into any ID and that you have an e-mail address that's never been associated with any Apple ID

How do I set up an itunes account without a credit card

how do I set up an itunes account without a credit card

Creating an iTunes store/iBookstore/Mac App Store account without a credit card
Please read very carefully.

My "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys arnt either? any help would be amazing!

my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing! I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not.
Anyone else feel me on this?
any help?

Well that still didn't make any kind of difference. I would just do without it but I've becomes really use to it with Avid for so long. I have to admit there are a lot of small moments like this that makes me miss Avid. Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...

How can I set up a form for someone to fill out on another person's behalf?

I am trying to set up a form in which someone is asked to fill in the form for another person. Basically, we're asking people if they're still our primary contact. If they are, it's a simple blind form confirmation. If they're not, we are asking them to please tell us who is. So it will take them to a form where they can tell us who is the new contact. However, I don't want cookies for the new person to be attributed to the person that filled out the form (as that would then mess with segmentation, lead scoring/nurturing, etc). We also need to see who is the person filling out the form, so we know who the new person is replacing. So we'll need to collect the name and/or email address of the person filling out the form, in addition to the name and email address of the person they're adding.
I know this can be done, as at a previous company we had a form that was used internally to add people who called in sales inquiries, so that we could capture them as "submitting an inquiry" as if they had just filled out a form. For example, I would fill out the form after someone called in asking for product information, but the online behavior of that person would not be attributed to me even though I filled out the form from my computer. Unfortunately, I can't recall how this was set up. Does anyone have any ideas on how this could be set up?

Hi Abby,
The easiest way to do this is to set up two forms:
The first form is for your primary contact, who will submit the email address for the secondary contact and any additional contact data for the secondary contact. You can also include a field (hidden or otherwise) for the primary contact if you wish to record this form submission activity, but functionally this is not required.
A second form which will accept the secondary contact's email address and any other contact info you'd like to capture through this process.
The trick is that once you've got these two forms saved, you add a form processing step to the first form called Post Data to Server. In this processing step, you fill in the details for the second form, including making sure to map the secondary email address field on form 1 to the primary email address field on form 2. The URL will need to be the POST action url for the secondary form, which you can get from the integration details. You'll also need to append your SiteID and Form Name, and also a variable to disable cookies for this submission (elqCookieWrite). The final URL should be something like this:
https://s1886.t.eloqua.com/e/f2?elqSiteID=1886&elqFormName=Alt2&elqCookieWrite=0
My organization is 1886, so you'll have to replace this with your Site ID
My secondary form name is Alt2, so you'll have to replace this with your secondary form name
elqCookieWrite=0 ensures the secondary form will not try to associate the session with the ElqGUID (cookie)
In the secondary form, make sure you have the processing step Update Contacts - With Form Data.
Now when submitting form 1, you'll see a submission to both forms, and the contact info submitted to form 2 creates a new contact (or updates an existing one) with no ties to the current session/cookie used to submit form 1. You can add these contacts to a shared list, enter them into a separate campaign or program, or anything else you could do with a normal form submission.
One caveat to remember though is that since this person did not submit the form, you have not technically collected any permission to contact them, so you'll have to sort that out with whatever rules apply in your area (your use case seems to be for existing customers which is generally OK, but you should still check).
Hope this helps,
Richard

How do I set up the Time Capsule without an internet connection

How do I set up the Time Capsule as a wireless hard drive without an internet connection. I am in a office situation in which I cannot access my work network. I need to be able to share files on the Time Capsule over the wire connection.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

My laptop will not let me see the letters to type to prove I am a person how do I set up my sync up without that?

My laptop crashed and when I got it back when a site asks me to type in the code I can not see the code on my screen so how do I set my account with out that

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
*https://support.mozilla.com/kb/Images+or+animations+do+not+show
*http://kb.mozillazine.org/Images_or_animations_do_not_load

How do I set/reset my passcode? I am locked out. I can't restore because I get a prompt that I need to turn off "Find my phone". I'm in an endless circle of frustration.

How do I set/reset my passcode on my iPhone 6 Plus?
I am locked out and don't have a passcode (at least I don't recall setting one)
I can't restore from backup to reset my pC because I get a prompt that I need to turn off "Find my phone" to restore.
I'm in an endless circle of frustration.
Any help on this matter is appreciated.

Hi Nancy,
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode

How can I set up a new account without auto deleting messages on the server?

Ive got accounts on COMCAST.NET (are those imap accounts?) and when I created a user account on Thunderbird for one of them the autocreate process immedaitely started downloading messages from my server before I was able to set the "keep messages on server" flag. (Its been a few months, forgive me if I am not using the exact right option text but you get the idea.)
How can I create a Thunderbird account that will download all the message on my server (comcast.net) and leave them all there?
That's the only thing keeping me from switching to Thunderbird. Please help - comcast's online web client is not the most bug free thing in the world.
(Note, I am setting up a new win7 system, had been using OE 6 on winXP. I assume I am better off trying this than running OE in XP in a virtual window - and even if I moved my old message bases from XP I still need to create an account that won't immediately start downloading/deleting messages from my server before I can configure it not to.)
Any help appreciated.

Comcast only offers POP accounts, and one way to set up the account and enter all the settings before it connects to the mail server, might be to do it Offline:
https://support.mozilla.org/en-US/questions/991539#answer-547878
The server settings are given [http://customer.comcast.com/help-and-support/internet/setting-up-thunderbird/ here], but the method is for Online account setup.

How do i set up an apple id without entering credit card details?

I have set up an apple id account but everytime i try and install a free app on the app store it keeps asking me to sign in then add credit card details.
How do i get round this as i am using a company ipad?

The iPad your company gave you may be supervised or otherwise be under the control of an MDM system preventing you from adding apps on your own. Please check with your company's IT Department to make sure.

If I establish a second (different) Zotero account on the same PC, how do I set it to be blank without destroying all the records in the other account?

I have long had a Zotero account and it works well. I recently merged it into a group account with a few other people; we are sharing the same set of references. Now I want to set up a personal account for different purposes, perhaps eventually becoming a different group. When I try to set up the new user name and password, all the same reference items still show. How do I start with a blank account for the new user name without erasing the items in the previous account?

I don't know how the Zotero add-on works, but if you want complete isolation, you could create a separate Firefox profile. Each profile has its own settings and add-ons, so unless Zotero creates a shared storage for all profiles, you will be starting fresh in the new profile.
For more information on using profiles and how to create them, check out these articles:
[https://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help]
[https://support.mozilla.com/en-US/kb/Managing-profiles Managing profiles | How to | Firefox Help]
Note: If that's not convenient, you could check with Zotero on whether they have a solution.

How do I set up 2nd ipod shuffle without erasing my playlist on iTunes?

I'm trying to set up a second ipod shuffle, for my daughter. When I first plugged it into my computer, I got a message saying it knew it wasn't my ipod and it asked me if I wanted to erase my playlist (or something like that). I chose "no". Do I need to create another account? How do I proceed so that I can set up this second ipod? Please help!
Thanks!!

Look here: http://docs.info.apple.com/article.html?artnum=300432

How to bypass setting up an iPhone 3GS without an active SIM card

How do I make my iPhone 3GS functional again?
I have an iPhone 3GS which I used to use as my cell phone, though I recently upgraded to a new phone. However, I still use this old iPhone for its capabilities as an iPod. The problem is, I tried to update it from iOS 6.1 to 6.1.3 and after I had to go through restoring it to factory default settings, it would not allow me to set it up as there was an issue with the SIM card and its pin. Is there any way for me to make it start working again?

iPhones require a SIM card for activation. There is no bypass.

How do I set a punch-in point without a punch-out point?

Similar Messages

Maybe you are looking for