HOW do i set my computer up to learn jave

I would like to set my computer up to start to learn how to program in java .
Can anyone tell me what is the best way to do this . should I work from dos and have all my files set up it dos please let me know ..
Javasomedaysoon

hi.. i am also new to java, but may be i can give something usefull to you.
To compile java, actually you don't need to set anything unless installing jdk. Later you need to set path where file javac.exe and java.exe founded to make easier organizing your java source file.
To make java program you can use any text editor. To compile you must back to dos prompt and run javac.exe. If you don't like this boring way, you can use textpad , the special editor for java program. There is a short cut to compile java and see the result. Of course not as complete as C,or pascal editor, but it's helpfully.
try it....

Similar Messages

  • HOW do i set my computer up to learn java

    I would like to set my computer up to start to learn how to program in java .
    Can anyone tell me what is the best way to do this . should I work from dos and have all my files set up it dos please let me know ..
    Javasomedaysoon

    I see the logic in just using a normal text editor
    but to some extent i think using an IDE like forte
    for java or JBuilder which you can get for free from
    www.borland.com is just as good if not better in that
    it highlights the syntax with color code and is
    easier to read when you're a beginner. JBuilder5
    personal edition only allows you to create classes
    and applets through the wizard, if i remember
    correctly, so you have to do all the code yourself
    anyway, so you're pretty much going to do just as
    much work. All it does through the wizard is
    basically set up the dir, package and class name with
    an easier method than doing it yourself.Textpad also supports syntax highlighting. I like textpad because it is very lightweight, starts fast, supports all type of files, not just java, it can easily replace your notepad for all text editing tasks. And if you use any other languages that are not supported by the editor, you can define your own syntax file. I have experience with Forte, and I found it to be full of bugs, very slow to start and react and having other pecularities.
    Kamran

  • "I have pages 5.1 but when I try to open a page on my desk top.. a message comes up - You need a newer version of pages to open this document.  How do I set my computer to open a page?"

    "I have Pages 5.1 but when I try to open a page on my desk top.. a message comes up - You need a newer version of pages to open this document.  How do I set my computer to open a page on my desktop?"

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Pages 5 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Note: Apple has removed over 90 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • How do I set my computer to accept wireless instructions from only my computer?

    How do I set my computer to accept wireless instructions from only my computer?

    Please provide the following relevant information so someone can help including:
    Printer Model -
    Detailed Problem Description -
    Operating System of computer (including service pack revision) -
    Connection Method - USB, Hardwired LAN, Wireless? -
    Make and model of router and modem? -
    Error messages - on printer screen and/or computer, any blinking light patterns. 
    If wireless, status of Blue Wireless light on printer, on, off or blinking? -
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I purchased my imac in the United States and now I live in the United Kingdom. How do I set the computer to know where we live as it defaults to US settings and I am having trouble registering my iphone

    I purchased my imac in the United States and now I live in the United Kingdom. How do I set the computer to know where we live as it defaults to US settings and I am having trouble registering my iphone. I had used it in the US for two years.

    You're Welcome..
    See Here for
    Changing Account Information
    http://support.apple.com/kb/HT1918
    Changing iTunes Store Account
    http://support.apple.com/kb/HT1311
    Apple ID FAQ
    http://support.apple.com/kb/HE37

  • How do I get my computer to "allow" a Java upload? It will not even accept the link from your support page.

    How do I get my computer to "allow" a Java upload? It will not even accept the link from your support page.

    Please post a screenshot that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

  • HT5622 how can I set a computer into my apple ID from someone else's Apple ID?

    Hi there,
        My father passed away a few months ago and I have inherited his iMac. How can I set his iMac now to my Apple ID instead of his? I am currently still under his Apple ID yet he no longer has e-mail, etc... and I would like to see my things instead.

    The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
    If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

  • How can I set my computer to not go blank when I am trying to read on adobe digital editions???

    I have a windows 7 computer. And I do not remember how to set my programing to stop shutting down the display every 20 seconds or so. So I Must be going senile or something.

    You can just set a hot corner to black the screen and it won't go to sleep.
    Ensure the sleep slider is at never.
    Go to System Preferences, and click "Exposé & Spaces"
    Go to the "Exposé" Tab, you will see "Active Screen Corners"
    Change one to "Sleep Display" So when you put your cursor to the corner and leave it there (don't touch it or it will come back to a normal screen) it will be black but won't sleep!
    This is what I have set on my iMac, hope it helps! It's my first answer post

  • How can I set my computer to stay awake while streaming an iTunes movie?

    Whenever I play music with the visualizer, play music videos, movies, TV shows, my computer still dims and sleeps. I don't know how to set it so that my computer stays awake?

    system preferences > energy saver.
    you can set computer sleep to never (or 3 hours) and set the display to sleep earlier.

  • How can I set the Computer Serial Number as a Variable?

    Hey everyone, need some help here,  I need to get some data from a workstation using a script.  What I would like to do is "echo" the serial number of the workstation to certain spots in the data file.  The only way I know how to
    do this is by setting the serial number as a variable and doing a echo %SERIALNUMBER%.
    How can I do this?
    I found the WMIC key:
    wmic bios get serialnumber
    doesn't help much though.

    Hi usgrcm,
    What is your current situation?
    Will the scripts suggested by Frederik Long work here to meet your needs?
    Besides, regarding scripts issue, if any further help needed, we could also ask in Microsoft Scripting Guys forum:
    The Official Scripting Guys forum!
    https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    Best regards
    Michael Shao
    TechNet Community Support

  • How can i retrieve a computer name with a java code

    hello friends,
    please, can i get help on how i can rtrieve the name of a computer(any at all) using java - a code will be appreciated.
    i also wish to ask if you know how i can use the JFileChooser class, such that when i click on a file to select it and then click on the open button, the file will open / show in a TextArea which i have already created.
    Moreso, how can i use the JFileChooser to save something i've written in a TextArea, as file to a system.
    thanks in advance for your useful advice. quite grateful.

    'result' is a String I think.
    As for your JFileChooser question...
    Create your take the file returned from JFileChooser, open it in a BufferedReader (I'm assuming it's text as you want to display it in a JTextArea) then read the lines out.
    JFileChooser fc = new JFileChooser();
    fc.showOpenDialog(null);
    File file = fc.getSelectedFile();
    if (file != null) {
    try {
    BufferedReader in = new BufferedReader(new FileReader(file));
    String inputLine;
    String total = "";
    while ((inputLine = in.readLine()) != null)
    total+=inputLine;
    in.close();
    textarea.setText(total); // textarea = your JTextArea
    } catch (Exception e) {
    System.err.println("Error: "+e);
    }

  • How to set genericObject in a TaskInstance from java

    Hi,
    How can I set generiobject to a taskInstace from java?
    And
    How can I get a variable of any other taskInstace in workFlow?
    Please suggest me.
    Thanks ,
    Ravi.G

    Hi,
    How can I set generiobject to a taskInstace from java?
    And
    How can I get a variable of any other taskInstace in workFlow?
    Please suggest me.
    Thanks ,
    Ravi.G

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • How do I set the thumbnail image of my videos that export to my computer?  I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.

    How do I set the thumbnail image of my videos that export to my computer?  I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
    Or how does Premiere 11 determine where to set the image for the video it is exporting? 
    I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
    Thanks,
    Mike

    Mike
    This is not Adobe. Rather user to user. We are all visitors here.
    Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
    As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
    If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
    Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
    And, remember, at the onset I wrote
    As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
    I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
    issues, it opts to give no image but a generic one.
    I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
    I would have to look into all this further to get perspective on the contributing factors.
    ATR
    Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count.

  • After downloading Mozilla Firefox 4.0 Beta to my desktop I restarted the computer, but I do not receive any prompts to create an account with a Secret Password. How do I set up the account if the prompt never show up?

    Several months ago I installed the Firefox Home app on my iPhone to sync the bookmarks that I had on my Windows XP home computer. It has worked just fine until a few days ago. Just recently I was notified that the app would no longer work because of changes that have been made. I have tried to follow the instructions that were emailed to me regarding how to setup the new Firefox Sync add-on, but I am having a problem. After downloading Mozilla Firefox 4.0 Beta to my desktop and restarting my computer, I do not receive any prompts to create an account with a password and a secret phrase, as the instructions specify. How do I set up the account if the prompt never shows up?

    Click on the Firefox button then select Options to open the Options dialog. Now go to the Sync panel for the option to setup a new account.

Maybe you are looking for