How do I set the filename using the inline reader with a web browser?

Hi all,
    Most likely an age-old question that I have not been able to track down an answer for ...
    My application presents a pdf to the user using an embedded reader and gives them the saveas button as an option in the toolbar.
    When they go to save the file it defaults the filename to be the entire URL of the document.
    How can this be changed to be something more user-friendly??
    Thanks in advance for any help you can provide for this issue.
-Dennis

I suppose you could use Javascript.
Or you could display the content within the applet itself.
But probably the best thing would be to have the server return a URL (or an identifying token to be added to a URL) and the applet could use AppletContext.showDocument to send the user to another page.
That's my opinion anyway.

Similar Messages

How do i set the Instapaper "read later" link as an app tab?

I'm loving the App Tab feature but the only thing I can't figure out is how I can set the Instapaper "read later" link as an app tab. Anybody have a suggestion?
Thanks!

Firefox Portable is an edited version of firefox. It's not exactly the same as the standard browser released by mozilla.
It sounds like the portable apps developers have made a change to firefox 12 that has resulted in the change in toolbar layout. I suggest getting in touch with them to ask if there is any way to reverse the change. Possibly they are not aware of it yet. There is a support page here:
[http://portableapps.com/support/chat Portable Apps Chat Support]

How do I set the default library with "Save As" ?

I use FIrefox. When I want to "Save As" a PDF file, the default library always resets instead of going to the last location where I saved something. How can I set the "Save As" default location to be a specific place?

Are you using the Save As command of Firefox or of Reader? If the former then it's a question more suited for a FF forum. If the latter I'm afraid the answer is you can't change it.

How do I set the desktop wallpaper with an image in aperture 3?

Sorry for the silly question, but I can't find how to set my desktop wallpaper with an image in aperture 3. It was simple when using Iphoto, but I can't find the method in aperture.
Thanks,
Dale.

Command(⌘)-9 is no longer listed in the list of default keyword shortcuts, and it has no effect.
I wrote a little Automator service to bring the Command(⌘)-9 back.
A copy of this service is here for download:
http://dreschler-fischer.de/scripts/SetDesktopPicture.workflow.zip
This service uses three actions:
Aperture: Get selected images
Export Masters
Finder: Set the Desktop Picture
To install it, open the workflow in Automator and save it as service.
To use it, select any image in Aperture, then activate the service from the Aperture menu -> Services, and it will set the master of the selected image as Desktop picture.
If you like, you can assign the Command(⌘)-9 key to the service (in the System Preferences -> Keyboard -> Keyboard Shortcuts Panel) and then turn any image you selected into Desktop wallpaper by simply pressing (⌘)-9.
@Frank Caggiano, if you are still following this thread: for some reason this workflow succeeds with exporting the master, but I could not get it to work with the versions instead. Any ideas?
Caution: this service will clutter the Desktop with the exported images. If you want to avoid that, change the export action to export the image to a different folder.
Regards
Léonie

How do I set the logging level with the plug-in 1.4

I am writing an applet that will be hosted in the plug-in version 1.4. I'd like to set up some logging statements using the java.util.logging API. I have successfully got it to print out log messages, but it is not printing anything below level INFO. How can I set it up to print out log statements at the FINEST level?

If you are using the default logger for logging from the applet, the default log level from the logging.properties file in your JRE lib directory is the place. There is an entry
.level= INFO In this file. You can modify this entry.
This is a a roundabout way of achieving it. since we are modifying the default log level here, it will be used by other java applications as well. I am looking for a better solution.

How can display word 2007 document file as a read only on web browser

hi,
i want to display word 2007 document file as a read only that means non editable file. At present i am displaying word file by using response object. please help me.
Thanks,
Raj

Hi dear,
Try with the sample code which has given in below link....
http://forums.devshed.com/java-help-9/need-help-reading-word-document-with-jsp-20316.html
---Vidya
Message was edited by:
ragas

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
Or how does Premiere 11 determine where to set the image for the video it is exporting?
I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
Thanks,
Mike

Mike
This is not Adobe. Rather user to user. We are all visitors here.
Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
And, remember, at the onset I wrote
As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
issues, it opts to give no image but a generic one.
I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
I would have to look into all this further to get perspective on the contributing factors.
ATR
Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count.

How do I set the audience when I'm using Siri on my iPhone 5 to post to Facebook

How do I set the audience privacy for when I’m using Siri on my iPhone 5 to post to Facebook?
When I ask Siri to post a message to my Facebook Siri tells me what I have said and then asks tot post it, I then checked on my computer and the post is visible to "ME ONLY" I can change this on the computer and on my phone via the App but I do not want to be doing that all the time.
If I post to Facebook via Siri on my iPhone 5 I want it at the default setting of friends only.
So How do I change this?
I posted the first one 2 minutes ago then went into Facebook via the App and changed it but did a second one hoping that the default privacy had changed but it was again to me only. As you can see via the padlock. Please help. Thanks

What if you do need help or emergency situation while Posting FB via Siri is the fastest way to show you or someone is in danger, and he/she is dying because the post is Only visible to Me !?!?!?!???
Anyone who uses FaceBook to get immediate help for life threatening emergency is mercifully removing themselves from the gene pool.

How do I set the "reply to" field in the iPad 2 Mail app? I use an email forwarding service (not an actual email account) that I would like people to reply to.

How do I set the "reply to" field in the iPad 2 Mail app? I use an email forwarding service (not an actual email account) that I would like people to reply to, so setting up an account with the correct reply-to address doesn't work because there's no associated outgoing mail server. I had this working under iOS4 but it seems to have disappeared when I upgraded to iOS5.

Welcome to the forum, NicoleYM. I don't think the Touch Mail has as many options as the Mac Mail app. However, you could set a standard signature. Go to Settings > Mail, Contacts, Calendars > Signature. There you can type a reply address and hope people see it.
Alternatively, you can go to your GMail account in your web browser and click on Settings > Forwarding and POP/IMAP. There you will have an option to forward all emails (or only some, if you set up a filter) to your other address.
Good luck!

How do i set the proxy user in FF 3.6.13, this entry was existing earlier its gone now. using IE with entries in user account pwds works while FF doesn't.

How do i set the proxy user in FF 3.6.13.
previous versions had an entry for proxy user.
its gone now.
using IE with entries in user account pwds works while FF doesn't.
too bad have to change back to IE :-(

You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]]

How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
CS 5.0 launches the internet browser. > TO SLOW I DONT WANT THIS.
CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
Community Help Application

How do I set up and use the TV tuner for an ENVY 23 TouchSmart?

How do I set up and use the TV tuner for an ENVY 23 TouchSmart?

Hello LindaLamb:
First thing is connect your coex TV Anti cable to your computer the end connector looks like a bolt. Then open up Windows Media Center go down the list to live tv and follow and fill in your information with wizard . If your computer doesn't have an built in TV Tunner then you will need to purchase an USB TV tunner. http://www.bing.com/shopping/search?q=usb+tv+tunner&qpvt=usb+tv+tunner&FORM=HURE . frrw

How do you set the amount of time the screen stays lite after your last use?

How do you set the amount of time the screen stays lite after your last use?

Settings>General>Auto-Lock.

How I can set Leopard to use the color management mixture that Tiger uses?

I have recently bought a new Mac with Leopard installed. My old Mac is running Tiger. Unfortunately the color management default settings in Leopard are different than in Tiger, so this is completely messing up my calibration. Can somebody please tell me how I can set Leopard to use whatever color management mixture that Tiger uses? - Thanks.

I already have set FF to No Proxy. This made FF work again, but not any of my other internet programs, programs that don't have the option to set to no proxy, they rely on the system settings. So I need to know how to reset my system settings back to their default values. This will allow all my net progs to access the net again, including FF using the Use System Settings option. Since FF has an option to use system settings, this is a somewhat FF related question. I need to get all my net programs working again, not just FF! And, if my system settings are restored, FF will work using the system settings, and all my other progs will work too.

How do you set the Crystal Report Viewer Printer to Duplex

Using the code below I can print in duplex mode, but this does not let me view a report before printing
How do I set the Printer in the Viewer Control Bar of the Crystal Report Viewer to Duplex Printing programmatically rather than having to manually select Duplex through the preferences option?
I have searched but the only example code I found produces errors in the code and will not run
Private myReport As ReportDocument
myReport = New ReportDocument()
myReport.PrintOptions.PaperSize = PaperSize.PaperA4
myReport.PrintOptions.PaperOrientation = PaperOrientation.Portrait
myReport.PrintOptions.PrinterDuplex = PrinterDuplex. Vertical
myReport.PrintToPrinter(3, False, 0, 0)
In my VB6 Project that I am converting to VB.NET when I added Report.PrinterDuplex = crPRDPVertical, this allowed me to view the report and then print with Duplex without having to set the Print Preferences manualy
I found 1386475 - How to set printer name and print job title at runtime using Report Application Server SDK for Visual Studio .NET
But this causes errors
Imports CrystalDecisions.ReportAppServer.ClientDoc
Imports CrystalDecisions.ReportAppServer.Controllers
Dim boReportClientDocument As ISCDReportClientDocument
Dim boPrintOutputController As PrintOutputController
Dim boPrintReportOptions As New PrintReportOptions
Edited by: DavidMills on Feb 18, 2011 11:58 AM

Hi David,
You can mix both engines, just declare them both with different report object names. Here's all of my references:
using System;
using System.IO;
using System.Xml;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.ReportAppServer.CommonControls;
using CrystalDecisions.ReportAppServer.CommLayer;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.ObjectFactory;
using System.Data.OleDb;
using CrystalDecisions.ReportAppServer.DataSetConversion;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportSource;
using CrystalDecisions.Windows.Forms;
using System.Data.SqlClient;
using System.Runtime.InteropServices;
    public class frmMain : System.Windows.Forms.Form
        CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
        CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rptClientDoc;
My file open dialog:
        private void btnOpenReport_Click(object sender, System.EventArgs e)
            rptClientDoc = new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
            openFileDialog.Filter = "Crystal Reports (*.rpt)|*.rpt|Crystal Reports Secure (*.rptr)|*.rptr";
            openFileDialog.FilterIndex = 1;
             if (openFileDialog.ShowDialog() == DialogResult.OK)
                  btnOpenReport.Enabled = false;
                  btnSaveRptAs.Enabled = false;
                  object rptName = openFileDialog.FileName;
                try
                    rpt.Load(rptName.ToString());
                    rptClientDoc = rpt.ReportClientDocument;
                catch (Exception ex)
                    MessageBox.Show("ERROR: " + ex.Message);
                    return;
                MessageBox.Show(rptClientDoc.MajorVersion.ToString() + "." + rptClientDoc.MinorVersion.ToString());
                    MessageBox.Show("Report opened.","RAS",MessageBoxButtons.OK,MessageBoxIcon.Information );
                    btnOpenReport.Enabled = true;
                    btnSaveRptAs.Enabled = true;
                //MessageBox.Show(rpt.RecordSelectionFormula, "my record: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
                MessageBox.Show(rpt.ReportRequestStatus.NumberOfPages.ToString(), "Number of Pages: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
As for the page number I use it off the Engine report object:
MessageBox.Show(rpt.ReportRequestStatus.NumberOfPages.ToString(), "Number of Pages: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
And it works for me...
Thank you
Don

How do I set the filename using the inline reader with a web browser?

Similar Messages

Maybe you are looking for