How do i show mulitple parameters in a header?

Post Author: Annette
CA Forum: Formula
here is my delima...
I have a parameter that asks for a certain resource unit id which is a number.
So the user chooses #31 which has an abbreviation of ORA.
or they can choose #53 which has an abbreviation of ORD-A.
I have a formula that says:
if {?resunitid} = 0 then "ALL"else {psmresunit.resunit_name}
if they choose both I need for the header to say ORA & ORD-A but right now the only that prints is the first resourse unit that they pick.
I tried combining that 'join' formula that i had been sent, but it keeps failing on me.
Can anyone help me?
so the parameter that the end user sees is a number, but what i need printed out on the header (which is that formula) needs to show both names and i can't figure it out..
THANK-YOU

Post Author: SKodidine
CA Forum: Formula
1. Create a subreport and link it on the parameter to the value in the table which would equate to {?resunitid} being linked to {psmresunit.resunit_code} .
2. In the subreport, create a formula such as:
stringvar x;if {?Pm-?resunitid} = {psmresunit.resunit_code} thenx := x + {psmresunit.resunit_name} & ", ";
3. Place the above formula in the report footer of the subreport. Right click on it and then on format field and on the Common tab, check the box next to Can Grow.
4. Place this subreport in the page header of the main report.

Similar Messages

HOw can i show a table(name given in parameters) in a report program

I made a report in which there is a paremeter asking for a table name ....
PARAMETERS TBLLE_NAME(10) OBLIGATORY.
Now when I enter the table namke then how can i show its values....
HINT:- We have to use fiels symbols....AND THE USER CAN ENTER ANY DDIC TABLE NAME having some records ...........

You can display the contents of the DB table inputted using ALV.
Pass the Structure name as the DB table name inputted.
Use CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE to create the dynamic table of the same structure as the DB table passed.
Once the above steps are done, the internal table with data can be displayed using ALV.
Reward points for all helpful answers.
Thanks,
Balaji

How to set the connection parameters for SQL

How to set the connection parameters for SQL to access the MS Access database
Attachments:
Quick_SQL.vi ‏21 KB
Doc1.doc ‏45 KB
db1.mdb ‏112 KB

Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

How to obtain POST request parameters

Does anyone know how to obtain POST request parameters after form submit like we can get GET parameters after form submission via {module_url, parameterName}?

"garry.b" <[email protected]> wrote in
message
news:gnndbf$i2q$[email protected]..
> Hi,
>
> When using AS3 to generate an HTTP POST request:
>
> var service:HTTPService = new HTTPService ();
> service.url = "
http://localhost:9090/service";
> service.method = "post";
> // service.request = {itemId: "12345"};
> service.send ({itemId: "12345"});
>
> my CherryPy web server complains about unexpected body
parameters:
>
> HTTPError: (400, 'Unexpected body parameters: itemId')
>
> Using Firebug's Network display, its Post tab shows the
following content:
>
> Referer:
http://localhost:8080/log/log-1.0-SNAPSHOT.swf
> Content-type: application/x-www-form-urlencoded
> Content-length: 12
>
> itemId=12345
>
> which looks very strange to me as I would expect the
Referer, etc.,
> request
> headers to show up in the Request Headers section and
not as POST body
> content.
> While this could be some Firebug issue, I think the
request message is
> really
> formatted incorrectly. When the web server gets the
request, it does
> recognize
> 'itemId' as a body parameter but then complains that
it's unexpected.
>
> I've googled the error message, studied HTTPService
examples, spent
> several
> hours playing with it and am stumped. Tracy Spratt
suggested setting the
> service 'request' to force a POST and I tried it but am
getting the same
> error.
> How do I make a POST request? Can I get POST data into
the message body?
> Stick with URL parameters only?
What happens if you post to the same service using an html
form?

How can I get pubished parameters to display the available settings

how can I get pubished parameters to display the available settings?

according to the online help, I'm supposed to click on Title to get to the titles settings as follows
"Adjust a title’s settings
You can modify a title’s default settings in the Title inspector.
Select a title in the Timeline.
Choose Window > Show Inspector (or press Command-4), and click the Title button at the top of the pane that appears.
Adjust the available settings as needed.
Note: You can also keyframe many of the settings in both the Title and Text inspectors."
Gsoing to the Text inspector, there does not seem to be anything in the menu where I can change the color of the text. Based on the photo that appears with the above instructions --it appears the ability to change ink color is under the Published Parameters that is the menu I cannot get to 'drop'

How can we show data in rows when it is in Columns........

I have strucked with a simple but a complex problem.
I have a Report with data in vertical rows..need of the hour is how can we show that data into column structure.
here is the table sample which i have in Database..
Location      chrg_type    Effective_date
xxxxxxx        xxxx          xx-xx
thhis is the structure in effective date we have several months in it in a single column i want show the effective date or effective month in various columns instead of a single column.
my required table is....
                            Effective_date     Effective_date
Location      chrg_type     xx-xx              xx-xx
xxxxxxx        xxxx          xx-xx
any tough heads?????

Hi Sunil,
Your 1st problem is that you are going to need one more field to accomplish you goal. What type of data do want under your new date columns?
Anyway, once you have that you need to move on to how to move the data out into columns based on date.
Try something like this.
0_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',CurrentDate) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',CurrentDate)
THEN {tbl.DataField}
1_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -1, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -1, CurrentDate))
THEN {tbl.DataField}
2_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -2, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -2, CurrentDate))
THEN {tbl.DataField}
... Repeat this process until you have all of the columns you need, following this format.
Hope this works for you,
Jason

How to capture show layer and hide layer event in photoshop through a plugin???

How to capture show layer and hide layer event in photoshop through a plugin???for mac

Use the Listener plug-in found in the SDK to see how you can monitor the show/hide layer event. You can also use the Getter plug-in to show what information you can find out about the current state of Photoshop.

How i can show the selection screen input field in the top of page in alv

hi ,
          how i can show the selection screen input field in the top of page in alv grid output.
tell me the process

Hi,
excample from my program:
FORM topof_page.
DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
        l_info        LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
    if not &1 is initial.
      clear l_it_header.
      l_it_header-typ   = 'S'.
      l_key = '&1'.
      translate l_key to upper case.
      read table l_it_textpool with key key = l_key.
      if sy-subrc = 0.
        shift l_it_textpool-entry left deleting leading space.
        l_it_header-key = l_it_textpool-entry .
      endif.
      loop at &1.
        case &1-option.
          when 'EQ'
            or 'BT'
            or 'CP'.
            write &1-low to l_it_header-info.
          when others.
            write &1-low to l_it_header-info.
            concatenate &1-option
                        l_it_header-info
                   into l_it_header-info
                   separated by space.
        endcase.
        if not &1-high is initial.
          write &1-high to l_info left-justified.
          concatenate l_it_header-info
                      l_info
                 into l_it_header-info
                 separated by space.
        endif.
        if &1-sign = 'E'.
          concatenate ']'
                      l_it_header-info
                 into l_it_header-info.
        endif.
        append l_it_header.
        clear: l_it_header-key,
               l_it_header-info.
      endloop.
    endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
             s_trmext,
             s_trmint,
             s_fkdat,
             s_delno,
             s_vbeln,
             s_deact,
             s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole

How can I print mulitple different .ai files onto one page in Illustrator CS6?

How can I print mulitple different .ai files onto one page in Illustrator CS6? I have all of the files organized by Arrange Documents>Tile All in Grid and I would like to print the files in this format so that they can all be seen at once when printed out onto one page.
Some background is that I have 16 different cad drawings that I have converted and edited in illustrator. I'd like to basically make a contact sheet with all 16 drawings so that they can be reviewed on one sheet of paper after printing. But each drawing is in it's own unique file, and I have not figured out how to put them all onto one page for printing.

You can place them (linked) into a new Illustrator file and print from there.
The original files will need pdf compatability.

Forms 6.0-- How can I show records in a block in different colours.

In a multi record block, how can I show few records in one colour and few more in a different colour depending on a condition.

Use DISPLAY_ITEM.
This will change the visual attribute of the item in the current(!) record,
set_item_property changes the attributes of the item in all(!) records.

How do I show my iCloud purchases in iTunes, but prevent it from showing duplicates of the songs I already have on my computer? There are duplicates of essentially everything! :(

How do I show my iCloud purchases in iTunes, but prevent it from showing duplicates of the songs I already have on my computer? There are duplicates of essentially everything!
I would like to show my available songs that I could download if I want, however the ones I've already downloaded to my computer are showing up still, which results in duplicates of everything (one on my computer, one in the cloud)

No.
Are the photos in an iTunes backup? If so then:
- You can restore another iPod touch, iPhne or iPad from that backup
- Extract the photos from that backup by
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
Otherwise maybe a data recovery company can help. Not cheap.

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database table) using Dreamweaver’s Repeat Region. Example: I have different products each one associated (through their productID) with two images (one that’s showing in the page and one for the rollover effect) that are pulled from a database using Dreamweaver’s Recordset. So I want to end up with a page containing row after row of images(one for every product).When moused over each image will reveal the second (rollover) image for the same product which in turn can be a link(the image itself ) that when clicked leads to a detailed page with more information about the product the image is associated with. To show row after row with images for the different products in the database table I am using Dreamweaver’s Insert Rollover Image command and then the Repeat Region – I have no problem to complete the steps, to insert the image and the rollover one at once and set the paths so they are pulled dynamically depending on the productID they are associated with .I have also no problem to apply the Repeat Region so not only the first image associated with the first product in the table is shown but all of them-a routine and standard procedure when using the Repeat Region to dynamically generate and display multiple rows of data. However, when I preview the page the rollover effect is lost –the images are shown but when moused over the second image does not show. The problem is caused when the Repeat Region is applied-once again I am allowed to apply it but the rollover stops working, a kind of interference. ANY SOLLUTION PLEASE, ANY WORK AROUND.

I gotta tell you, using multiple images for rollover effects is going to be a big challenge in your dynamic scenario.
If this were my product page, I would use thumbnails with a bit of CSS opacity or filters to desaturate and make them full opacity/color on mouse over. Nice effect with much less bandwidth. Easily done globally with CSS code.
Two examples:
http://alt-web.com/GALLERY/GalleryTest.php
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
Nancy O.

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How do I show photos in iPhoto as a list?

how do I show photos in iPhoto as a list?

In iPhoto under recent select photos view and turn off show event titles - set the sort to your choice under the view menu
LN

How can I show album art in the mini player when playing songs from a plugged in iPhone?

How can I show album art in the mini player when playing songs from a plugged in iPhone?
When I play from my phone and switch to the mini player it's always showing the music notes in the thumbnaill. It'd be nice if it could get album art off of the phone.
I'm on iTunes version 11.0.4.4

He @mracole,
it is very nice that you post a solution to complete the library with artwork for album's that do not have an artwork. Your solution perfectly addresses the problem for assigning artwork, BUT this thread is about CHANGING artwork for albums already uploaded into iTunes Match. Just try to replace for example a blue artwork cover for an album with a red one. If you made it in a simple way (without deleting the album from iTunes Match and local changes on the files with an external ID3-Application or 2 or more iTunes libraries on different Mac's) this is the right place to give a solution. I really tried for hours to change the artwork to make them visible in landscape cover flow mode on my iPhone5. In rare cases I made it, but then the covers sometimes where restored to the old onces - exacly how it is mentioned by Starhawk
As long as there is no simple way to change the cover of an iTunes Match stored album (you can change title, artist and so on without hitting "update iTunes Match" over all distributed Library on different devices - this date will be synchronized almost instantly) I considered the behaviour from iTunes as BUGGY! For me the local artwork cache (and if there is any iCloud artwork cache - I don't know) do not interfere with iCloud. Even when I delete the whole local cache (album artwork music - everything) I do not manage to change the artwork.
Regards from Munich, Germany

How do i show mulitple parameters in a header?

Similar Messages

Maybe you are looking for