How do I show the value of Males and Females in a Pie Chart?

I am creating a sheet with demographics for my parish. I have a column with "M/F" and in the rows assigned to specific names, I have placed an M if that person is Male and an F if that person is Female. I would like to show the ratio between males and females in a pie chart. I don't know too much about spredsheet software. How can I go about showing these values/ratios in a pie chart?

You should create two tables using the Table Insert tool (like Vince said):
Then you can give the tables names by double clicking the name in the Sheets list (left):
Then you can enter the data (or copy and paste from your existing table). Then enter the formulas I provided previously, and graph. There is a user guide and lot's of Apple-provided movies (http://support.apple.com/videos/#productivitysoftware) that can help you get through the basics.
I hope this helps.
Wayne

Similar Messages

How can I get the values on Xaxis and Yaxis?

Hi, I would like to get the values that are on the axis X and Y or to get the base value and the ticks interval for calculating the values.

You can get the base values and intervals via the following properties:
XAxis.MajorDivisions.Base
XAxis.MajorDivisions.Interval
XAxis.MinorDivisions.Base
XAxis.MinorDivisions.Interval
YAxis.MajorDivisions.Base
YAxis.MajorDivisions.Interval
YAxis.MinorDivisions.Base
YAxis.MinorDivisions.Interval
Note that calculating the values from these properties will only work if the axis AutoSpacing property is false. Otherwise, the ticks and labels are automatically determined by the graph depending on the available space to present something that always looks nice.
- Elton

How can I remove the values of two MessageTextInputFields?

Hi all,
I have two MessageTextInput fields in which user have to enter two unique values.
With CO extension I have thrown a message "This code combination is already used" after some validation checks which is working fine.
My issue is -- if user enter the values which is previously entered than system throw a message which is workin fine but after thrown the messge system should clear the values which is entered by user in these two fields.
these two strings fields i got by
Agency_Location_Code = (String)pRow.getAttribute("AgencyLocationCode");
Bank_Account_Name = (String)pRow.getAttribute("BankAccountName");
How can I remove the values of Agency_Location_Code and Bank_Account_Name?
Thanks
Amit

Hi Gyan,
By setting null in Agency_Location_Code and Bank_Account_Name fields before throw exception, Still values of these two fields are showing. when we navigate to same supplier second time.
Is there any other solution to clear the fields.
Its urgent.
Thanks
Amit

How can I show a value according to the position of the mouse arrow ?

Hi Everyone,
I am changing the color of the background of some indicators according to temperature measures. Each background is linked to one temperature. I would like to show the value of a temperature when passing the arrow of my mouse over the indicator. I don't want to over charge the Front Diagram with all of the temperatures.
Is this possible? The temperature could appear in a unique and fixed indicator, or linked to the arrow,...
Any help would be great,
Thanks,
User
Solved!
Go to Solution.

Hi Ravens and Dan,
Thanks for your answers.
Ravens, I would rather not use the arrow position because I need to do this overs 100 indicator, and that would be a bit long. Added to that if I need to change the positions of the indicators (whch I will) that would mean to redefine the positions of the indicators....But perhaps your solution is the only possible?
Dan, I have taken out and simplified the piece of my program. Setting the value of the indicator to transparent except when the mouse is over the indicator could be an example of presentating the values but I still don't know how to this (without having to define the position of each box)
Thanks again
User
Attachments:
forum 14 02 10.vi ‏9 KB

Please, How do i get the values from a h:selectManyCheckbox ?

How do i get the values (selected or not) of a <h:selectManyCheckbox> tag and show them .For instance
i have the folowing options :
<h:selectManyCheckbox
                       id="cartas"
                   layout="pageDirection"
                    value="#{store.cartas}">
      <f:selectItems
                    value="#{cartas}"/>
    </h:selectManyCheckbox>
    <h:message styleClass="validationMessage" for="newsletters"/>with my faces-config.xml:
<managed-bean>
    <description></description>
    <managed-bean-name>cartas</managed-bean-name>
    <managed-bean-class>java.util.ArrayList</managed-bean-class>
    <managed-bean-scope>application</managed-bean-scope>
    <list-entries>
      <value-class>javax.faces.model.SelectItem</value-class>
      <value>#{cartas0}</value>
      <value>#{cartas1}</value>
      <value>#{cartas2}</value>
      <value>#{cartas3}</value>
    </list-entries>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas0</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Semanal</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>200</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas1</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>As bruxas</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>201</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas2</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Exercise</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>202</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas3</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Gusman Park</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>203</value>
    </managed-property>
</managed-bean>Thanks for the atention!! All the best!!

Hi,
In your backing bean you will need to add a new variable to bind your control to, I think this variable needs to be of teh "HtmlSelectManyCheckbox" type. The on your jsp page you can add binding="#{myBean.myVariable}".
When you want to get the values of the selectMany in your backing bean, you can call the getSelectedValues() function on your HtmlSelectManyCheckbox variable.
in backing bean:
private HtmlSelectManyCheckbox hsmc;
public HtmlSelectManyCheckbox getHsmc(){
    return hsmc;
public void setHsmc(HtmlSelectManyCheckbox hsmc){
    this.hsmc = hsmc;
public void someFunction(){
   Object[] obs = hsmc.getSelectedValues();
}On jsp page:
<h:selectManyCheckbox
                       id="cartas"
                   layout="pageDirection"
                    value="#{store.cartas}"
                     binding="#(myBean.hsmc}">
      <f:selectItems
                    value="#{cartas}"/>
    </h:selectManyCheckbox>

How to get all the values of a variable with F4 with checkboxes to select

Dear Experts,
After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
I hve tried by deleting the Delete Personalization also,but no use.
Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
Thanks in advance

Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

How do I show the Status file property of a Word document in the SharePoint library?

When I created some Word documents (using Word 2010) I filled in the Status property before saving them on my PC's local hard drive. Not having tried that before, I verified I'd done it by selecting the file in Windows 7 File Explorer and looking at
the file properties pane along the bottom of window. Lo and behold, there's a line in there called Content Status with a value identical to what I typed in within Word.
So far so good. But how do I get the SharePoint library to show the value of that field for each document? I tried Modify This View (go to the library, click ... , Click Modify This View) then looking at the list of columns I can enable / disable using the
Display tick boxes. But neither Status or Content Status are listed among the 21 Column Names and there doesn't seem to be a control to add custom ones.
Have I missed out some stage? What am I doing wrong?
Please keep in mind that I'm a SharePoint novice.
Regards,
Bruce Officer

Hi ,
Do you want to change the default paper size in Word 2010? If so, this is how I do it.
1. In Word 2010, go to Page layout tab.
2. Click Size in the Page Setup group then click More Paper Sizes.
3. In the Paper tab, input the paper size that you want, then click Set as default.
If there is anything that I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Creation of a Query to show the values for the current month and the last 12 months data.

Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
Hema

Hema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh

How do I use the value of a table attribute outside the table?

I have two tables that are master detail. But it might not be so obvious to the user before he knows how the page works that they are master detail. The tables are in separate showDetailItems in a panelAccordion and what I was thinking of was to show the value of one coloum in the selected row in the master in the text in the showdetail item that contains the detail table. But I can´t find the right expression to put into the accordion. How should the expression look like to get the value of an attribute in a table for use outside the table?

Thanks for the suggestion but it doesn´t work. The first problem is that the page turns blank when I use that expression for the text in the showDetailItem and the second problem is that I don´t seem to be able to use the master table as a partial trigger. When I click edit in the partial trigger property I can´t shuttle the master table over to be a partial trigger to the showDetailItem even if the table has an id.
Edited by: Atlantic Viking on Apr 2, 2009 6:24 AM
Well I figured out how to come half way. I did the following things:
1) Created an attribute value binding to the attribute I wanted to be shown in the showDetailItem
2) Set the text property in the showDetailItem to this attribute value like this #{binding.attributeValue}
To solve the problem I had with the partial triggers I continued like this
3) Gave other components on the path from the showDetailItem to the master table id´s
4) Clicked edit on the partial trigger property on the showDetailItem and was now able to shuttle the master table over to be a partial trigger.
But I now got an other problem which looks like a bug. At first when I enter the page it looks fine but when I change focus in the master table to another row part of the showDetailItem containing the detail table disapears. The detail table still remains and works as it should but the part containing the text I tried to set above disapears and the text in the showDetailItem containing the master gets replaced by the text that was supposed to be in the showDetailItem containing the detail table. Any suggestions how to correct this are very welcome.
Edited by: Atlantic Viking on Apr 2, 2009 6:59 AM

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

How can we show selected values of a tree in a selectmanylistbox

how can we show selected values of a tree in a selectmanylistbox??

Hi,
you can use a reference to a RichTree component instance and call getSelectedRowKeys on it. The selected rowKey then allow you to look-uo the nodes in the tree. You can use a custom selection listener on the tree to be notified about each selection. There also is an API for the de-selected row keys, which you need to remove nodes from the select many list. The select many list will get its data from a managed bean in view scope (so the values survive subsequent requests)
Frank

How can i show the first item in the list as selected item

Aslam o Alikum (Hi)
Dear All
How can i show the first item in the list as selected item when user click on the list. Right now when user click the list the list shows the last item in the list as selected or highlighted. Furthermore if the list item have large no of value and a scroll bar along with it then the list scroll to last item when user click it with mouse. I want that when user click the list item with mouse list should show the first item as highlighted.
Take Care
Allah Hafiz

Hi!
You can set list "initial value" using When-Create-Record trigger.
I.g.
:<Block_name>.<list_item_name> := Get_List_Element_Value('<Block_name>.<list_item_name>', 1);

How do you show the data in Illustrator Graphs

How can I show the data in my graphs? I input the data and it creates the bar graph but doesn't show the actual numbers used to create the bars. I have to put them in manually. Anyone know?

Sorry but I am just not seeing how to get the data used to plot the graph to show without manually putting in the numbers after it creates the graph. Help details not very helpful. I can show the Value Axis info, the Category Axis info, and legend info but not the numbers used to plot the bars.

How can i show a value into a MessageStyledText

Dear all,
Suppose i have a value in a variable i.e. number=10;
how can i show this value into a MessageStyleText when page loads.
please suggest.

Gyan wrote:
Mofizur,
Get the value from the variable & Use the below code in PR.
OAMessageStyledTextBean processCodeBean = (OAMessageStyledTextBean)webBean.findChildRecursive("<Replace with Bean Id>");
if(processCodeBean!=null)
processCodeBean.setText(pageContext,null);
}Regards,
GyanString employeeNumber = "10";
processCodeBean.setText(pageContext,employeeNumber);
OR
processCodeBean.setValue(pageContext,employeeNumber);
Thanks
--Anil

Query is not showing the values - authentication error

Hi,
After running a query it is not showing the values and showing <b>"You do not have the authorization for the selected component."</b>
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
InfoCube ZPLAYOPPT
Type of a component REP
Component PLAYBOOK_OPPT_1
Activity 16
Notification Number BRAIN 800
<b>Can u pls tell me the solution.</b>Thanks and Regards,
Giri.

Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
Hope this helps,
Regards,
Petter

How do I show the value of Males and Females in a Pie Chart?

Similar Messages

Maybe you are looking for