How do i start a program with the window maximized

Hi, i have a couple of programs that i have created launchers for. The slight bother is i have to click on the maximize buttons for the programs to fully resize and fit the screen. Was wondring if there is a flag i can add to the command to ensure it starts with the window fully maximized. Thnx.

you need to put something like this in your ~/.devilspie.xml
- <flurb>
- <matchers>
- <matcher name="DevilsPieMatcherWindowName">
<property name="application_name" value="audacity" />
</matcher>
</matchers>
- <actions>
- <action name="DevilsPieActionSetGeometry">
<property name="xoffset" value="0" />
<property name="yoffset" value="0" />
<property name="width" value="100" />
<property name="height" value="100" />
</action>
</actions>
</flurb>
</devilspie>

Similar Messages

HT3986 How do I start up Mac after the Windows has been installed.

How do I start up Mac after the Windows has been installed? And after I installed the Windows, my Audio is gone. How can I get it back?

Welcome to the Apple Support Communities
1. To boot into Mac OS X, press X key while your computer is starting.
2. Install Boot Camp drivers

How do you start a loop with an event and end the loop when u release ....

How do you start a loop with lets say an event of some sort, whether it be holding down a key or pressing the mouse click and then stopping the loop when you release that key or mouse button.?
double c = 1.8, i = 1, max = 90, exp = 0;
final double inc = 0.002; //speed at while it increases
boolean f = false, g = false;
while (true)
    while (f == false && stopMeter == false) //increasing speed going up to 90
        exp = Math.pow (c, i);
        i += inc;
        pAngle.setText (Math.round (exp) + "");
        if (exp > max)
            f = true;
            g = false;
        } //end if
    } //end while
    while (g == false && stopMeter == false) //decreasing speed going down from 90
        exp = Math.pow (c, i);
        i -= inc;
        pAngle.setText (Math.round (exp) + "");
        if (exp < 1)
            g = true;
            f = false;
        } //end if
    } //end while
} //end whilethis is a snippet of my increasing increments. Its for an angle meter. I can't get it to stop, when the user clicks or does something... the program just gets stuck in an infinite loop. I am still new to java and i do not know how to fix this.

You are in the wrong forum. Try this one instead: http://forum.java.sun.com/forum.jspa?forumID=31
/M

Pin Programs on the Windows 7 Taskbar & Start Menu with Group Policy (Windows Server 2008 R2)

Dear ALL,
I want to Pin Programs on the Windows 7 Taskbar & Start Menu with Group Policy (Windows Server 2008 R2) as per below description. Can someone please help me how to proceed and achieve this.
Pin the following applications to the Taskbar:
Outlook
Pin the following applications to the Start Menu:
Outlook
Excel
Word
Internet Explorer
Software Center
Regards,
Amit Kumar Rao

https://www.google.de/search?q=windows+7+pin+to+taskbar+vbs
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too. How do I correct this? It didn't do this before.

I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too. How do I correct this? It didn't do this before.

ebooks is a term for (mainly) textual books that can be read on screen. If you're listening then I think you mean audiobooks. See audiobooks on iPods. Either reorganize as single files or access via a playlist.
tt2

Trial version. Today I have downloaded the program with the serial number, now I'm doing the istallation he asks me the serial number, I put it and he tells me that I need also the serial number of the previous version. How can I find the serial number of

1 month ago I Downloaded a trial version. Today I have downloaded the program with the serial number, now I'm doing the istallation he asks me the serial number, I put it and he tells me that I need also the serial number of the previous version. How can I find the serial number of the trial version?

What program, and did you buy the UPGRADE version, or the FULL version?
Your description indicates that you bought an upgrade version... which requires proof of a previous version to install
So, if you had A and you bought A+ you need to provide your A serial number during install so A+ knows you are legal

How to start a program with Admin rights without UAC dialog?

I want to run a program with the user's admin rights,but i don't want windows pop up the UAC dialog.How can i do that?tks.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

TS1702 Why we still dont have sound notifications on iPhone??? This started in September with the launch of the new IOS and iPhone 5... I've been waiting and waiting and still nothing... How hard can this be to fix????????

Why we still dont have sound notifications on iPhone??? This started in September with the launch of the new IOS and iPhone 5... I've been waiting and waiting and still nothing... How hard can this be to fix????????

Hi guys... The notifications i'm speaking about are everything that happens on our facebook. The only exception where i get notifications is if someone actually use my name on a post, then i have a notification. Now, if it is a post on my wall, a comment on one of my photos or even a like, there is no sound or vibration at all.
Also, when i say "We" is bacause there are a few users complaining about the same. There are some other forums, specially on facebook about this. What happens is that facebook blocks some of those groups.
One more thing is i did try all possible things to make sure i was doing the right things in order to have notifications. Slider is obviously not in mute position, notifications sounds are on on facebook settings on main settings and also inside the app they are on. Did try to switch everything off and reboot then change again. Did restore the iPhone as new a couple of times. And like i said, if someone actually write my name i will have sound notification...
Anyway, many thanks for your help

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

Trying to down load but get error message.... "there is a problem with the Windows Installer Package" Does anyone know how I fix this??

"there is a problem with the Windows Installer Package" Does anyone know how I fix this??
My itunes ends up being so out of date becuase I can never upgrade it.
I have a sports kit and want to make sure I am using the most uptodate version
I managed to delete the old version, just in case it was the fact it was about 10 versions out of date that was the problem but now I can't reinstall it at all......
Please help

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

How to run a server program in the background on Linux or Windows?

I just finished writing a Java network application with multiple clients and one server.
However, I am not sure how I can run the server (SomeServer.class) in the background on Windows. Also when I am running it on Linux, I don't want it to terminate when I logout of the Linux shell.
To run the server on Linux, should I use a command like this?
nohup java -cp . SomeServer.class > output.txt &
Or is there another command, or perhaps some code that I can add to the program so that it would run in the background automatically and/or continues even when I logout of the Linux shell??
Sometimes, I also like to run the program on a Windows XP machine for testing purpose. How can I do it so that it runs in the background without openning a Console/Command Prompt window??
(redirecting the standard output to a file)
And is there an easy way to create a EXE file that runs the program with the default JRE in windows?

On many UNIX systems there's a utility called detach which will launch the following command in such a manner that killing the shell will not kill the process. On systems that lack this command, I'd find an open source implementation and install it.

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

How do i start a program with the window maximized

Similar Messages

Maybe you are looking for