How do I start on boot with linux?

Hi,
I'm running on Red Hat Enterprise Linux Server release 5.4 (Tikanga). How do I start the weblogic server on boot? Can I just put in the startWebLogic.sh from the /opt/Oracle/Middleware/user_projects/domains/adf2_domain/bin directory into init.d? Is there another script somewhere that I can use for this? I've searched and searched for this to no avail.
Thanks,
janel10

You may also need to auto-start your nodemanage process(es). So that if your machine restarts, nodemanager will start and then ( if you have CrashRecoverEnabled=true in your nodemanager.properties file ), nodemanager will start your managed servers for you.

Similar Messages

[SOLVED]How to configure pptp vpn start on boot with netcfg?

I've configured 2 profiles:
eth0 and ppp0, where ppp0 is a pptp vpn tunnel.
$ ls /etc/network.d/
eth0 examples interfaces ppp0
$ cat /etc/network.d/ppp0
CONNECTION='ppp'
INTERFACE='ppp0'
PEER='dxt'
PPP_TIMEOUT=10
$ cat /etc/conf.d/netcfg
# Enable these netcfg profiles at boot time.
# - prefix an entry with a '@' to background its startup
# - set to 'last' to restore the profiles running at the last shutdown
# - set to 'menu' to present a menu (requires the dialog package)
# Network profiles are found in /etc/network.d
NETWORKS=(eth0 ppp0)
# Specify the name of your wired interface for net-auto-wired
WIRED_INTERFACE="eth0"
# Specify the name of your wireless interface for net-auto-wireless
WIRELESS_INTERFACE="wlan0"
Manually, I can start up ppp0 correctly.
$ sudo netcfg -u ppp0
:: ppp0 up [ BUSY ] Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
CHAP authentication succeeded
MPPE 128-bit stateless compression enabled
Cannot determine ethernet address for proxy ARP
local IP address 10.100.3.132
remote IP address 10.100.3.1
[ DONE ]
$ ip addr list dev ppp0
8: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1496 qdisc pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 10.100.3.132 peer 10.100.3.1/32 scope global ppp0
But after booting, only eth0 is up. How to configure ppp0 to start on boot with netcfg?
Last edited by rchiang (2012-12-21 01:09:32)

Thanks a lot for your instruction.
netcfg works now!
chris_l wrote:
Did you
systemctl enable [email protected]

My hard drive died. How can I start my computer with my Time Machine external drive?

My hard drive died. How can I start my computer with my Time Machine external drive?

Pondini wrote:
If you're on 10.7.2, yes, you can boot from the TM drive.
Beep, beep, beep....
Hold ON! Getting a call on the red phone.
"Yes...yes.... ok!"
It's confirmed, H.e.l.l. has finally frozen over! TM drives are now bootable!
Still it's not a real bootable clone, can't run the computer off the external drive for long in only Recovery mode, still requires the boot drive to be replaced if it not functional, and with TM backing up every hour, isn't going to offer much software protection as the TM drive is just as likely to be as messed up as the internal boot drive.
For a iMac it still requires the computer to be taken in to Apple for a drive replacement, as ONLY Apple can do it due to proprietary connections and firmware on the iMac hard drives.
But it is bootable!
The backup time factor can be controlled using TimeMachine Editor, from every hour to just when the user thinks it's necessary.
Apple lurches slightly forward! Hurray!
Question is, can one restore from earlier stable TM's or just the last one? In this bootable fashion?

How do you start a loop with an event and end the loop when u release ....

How do you start a loop with lets say an event of some sort, whether it be holding down a key or pressing the mouse click and then stopping the loop when you release that key or mouse button.?
double c = 1.8, i = 1, max = 90, exp = 0;
final double inc = 0.002; //speed at while it increases
boolean f = false, g = false;
while (true)
    while (f == false && stopMeter == false) //increasing speed going up to 90
        exp = Math.pow (c, i);
        i += inc;
        pAngle.setText (Math.round (exp) + "");
        if (exp > max)
            f = true;
            g = false;
        } //end if
    } //end while
    while (g == false && stopMeter == false) //decreasing speed going down from 90
        exp = Math.pow (c, i);
        i -= inc;
        pAngle.setText (Math.round (exp) + "");
        if (exp < 1)
            g = true;
            f = false;
        } //end if
    } //end while
} //end whilethis is a snippet of my increasing increments. Its for an angle meter. I can't get it to stop, when the user clicks or does something... the program just gets stuck in an infinite loop. I am still new to java and i do not know how to fix this.

You are in the wrong forum. Try this one instead: http://forum.java.sun.com/forum.jspa?forumID=31
/M

PXE-Boot with Linux

I have an IBM Machine (8193-75G) with Intel 10/100/1000 LAN. Is it
possible to do an PXE-Boot with Linux? Do I need a special driver?
Thanx

[email protected]
> I have an IBM Machine (8193-75G) with Intel 10/100/1000 LAN. Is it > possible to do an PXE-Boot with Linux? Do I need a special driver?
> Thanx
You might get an answer in the imaging forum
Jared L Jennings, CNE
Novell Support Forums SysOp.
http://support.novell.com/forums/faq_nntp.html
Posting with XanaNews Reader 1.15.7.4
Geek by Nature, NetWare by Choice.

T400s Linux/Windows dual boot with Linux from Esata Flash Drive

This project is about a dual boot Windows/Linux system without using the normal dual boot changes in the bootloader of the windows hard drive. When I started this I found bits and pieces of information on the web but no complete description so I wrote this post.
I have done a dual boot system on my previous Thinkpad where I had partitioned the hard drive between Linux and windows. For this project I wanted to leave the windows hard drive absolutely intact and unaltered, and boot Linux from a flash drive in the esata port on the back of the T400s. Obviously this uses the F12 boot list function key to boot from the flash. The advantage of this is that Windows is totally unaltered and when I need Linux, I plug in the esata flash drive, hit F12 during the boot cycle and select booting from the esata flash drive. The reason for Esata rather than USB is simply speed. I have a nice fast Linux installation.
I used the OCZ esata flash drive but suspect any of the alternatives will work. It did not need the accessory usb cable because the Thinkpad powered the esata flash directly.
To boot from the esata drive I had to make the following changes in the bios
    I left the esata flash plugged in as I went into the bios
    Bios>config>Serial ATA and changed the Sata controller mode option to compatibility
    Restart and back into the Bios
    Bios>startup>boot - in my case the esata flash drive showed up as ATA HDD2 and was excluded from the boot order so I had to un-exclude it and move it to the point in the boot order that I wanted.
Next I downloaded a linux installation iso and put it on a CD - in my case opensuse. Then booted from the CD
From now on this instructions are specific to opensuse and yast but can be generalized to whatever Linux is being used.
In my case yast came up with a good set of suggestions for automatically partitioning the flash drive but then crashed during the partitioning itself. So I rebooted and specified the partitions manually.
    A fat32 partition left as a partition which both windows and Linux could see (in my case about 20% of the drive) (/dev/sdb1)
    An extended partition with the remainder of the drive (/dev/sdb2) which contains the following logical partitions
    A linux Swap partition of 2GB (/dev/sdb5)
    A linux /home partition –the remainder of the drive (/dev/sdb6)
    A linux /root partition of 8GB (/dev/sdb7)
Yast automatically suggested mount points of C,D,E for the windows partitions. Unfortunately because of the way the Thinkpad hard drive was laid out Yast had C assigned the ThinkPad Service partition and D assigned to the SW_Preload (or main windows partition). However there was an edit function that allows for the reversal of those mount points so that the windows C drive is mounted in Linux as Windows/C thereby avoiding confusion. I had already backed up and removed the Thinkpad factory install data so I did not have to deal with that. Yast suggested Windows/E for the mount point of the FAT32 partition on the flash drive, which I accepted.
The yast install configurator made all this manual selection easy, and after the manual configuration the partitioning worked perfectly.
Next step was Linux user configuration which went fine
Next was booting.
In the section management tab
    delete the windows 1 and 2 options (since we are not dual booting directly)
In the boot loader installation tab
    uncheck boot from mbr ( this stops the install from installing Grub and dual boot on the windows c drive
    check boot from root partition (this installs grub and all associated files in the Linux root partition (/dev/sdb6)
I believe that the correct procedure at this point is to click Boot Loader installation details which will bring up the Grub device map. In the device map there will be a line for the fixed hard drive (aka the windows drive) and a line for the esata flash drive. When the installer started up these were in hard drive and esata drive order. However when we boot directly from the flash the esata drive will be grub drive hd0 and the fixed hard drive will be grub hd1. The device map order needs to be changed to reflect this ie the esata drive should be first not second.
I did not do this and ended up initially doing Grub command line editing to boot and later manually editing the grub files using information I had previously learned the hard way and through google.
At this point let the installer go ahead and install Linux. After doing this it should come back and tell you to reboot. Do not do it yet because we need to install the MBR into the flash drive.
I suspect that there is a way of doing this in Yast running from the Live CD but it was not obvious to me so I used the manual method that I have used before.
Open a root terminal
Mount /dev/sdb6 to /mnt/sdb6 (my linux root)
Touch /mnt/sdb6/boot/grub/flag
The purpose of this is when we go looking later at the grub command prompt we need an easy to find unique file
Start grub and do the following
#grub
            grub> find /boot/grub/flag
                (hd1,5)    -- the result of the find in my example
            grub> root (hd1,5)   -- using the result of the find in my example
            grub> setup (hd1)   -- install mbr -- my example parameters - if you get this wrong you will trash some other drive!!!
                  hopefully grub announces success
            grub> quit
Reboot and select the flash drive. In my case I still had the grub devicemap wrong and had to edit the grub commands during boot to tell grub how to find the correct partition and then edit them again after booting
Typical linux install issues that we all always seem to have and can be solved with a little (or a lot of) google research.
As I said at the beginning I now have an untouched windows installation and a nice fast Linux installation. I hope that this will be of some use to someone.

Hi chrissh
i tried this exact procedure... on the exact same notebook (T400s). However, as soon as I set the
   Bios>config>Serial ATA to "compatibility", I cannot use my default Windows installation! I immediately get the "blue screen of death".
I doubt I did anything differently since this is the first step of your procedure and my laptop is brand new!
any idea?

[SOLVED] Cannot boot with linux-3.5.3

Edit: Solved, as explained here.
Hello,
after upgrading to linux-3.5.3-1 my boot stopped at
:: running early hook [udev]
I tried upgrading to grub-bios-2.00, removing any customization I had in modprobe.conf and /etc/modules-load.d as well as removing the only module (radeon) from /etc/mkinitcpio.conf (obviously followed by mkinitcpio -p linux), which made me go on to
:: waiting for udev uevents to be processed [BUSY]
I'm not sure it's an actual progress.
My /etc/udev/rules.d is empty and /usr/lib/udev/rules.d only contains pacman-tracked stuff.
I enabled some debugging as described here but couldn't get anything useful - is there any way for such messages to be logged somewhere, so they can be pasted here?
I ended up downgrading to linux-3.4.9, which boots fine.
Any idea to troubleshoot this?
cat /etc/rc.conf
# /etc/rc.conf - configuration file for initscripts
# Most of rc.conf has been replaced by various other configuration
# files. See archlinux(7) for details.
# For more details on rc.conf see rc.conf(5).
DAEMONS=(!hwclock ntpd syslog-ng !network netfs crond dbus @networkmanager kdm @cpufreq sshd @cups @supervisor)
# Storage
# USEDMRAID="no"
# USELVM="no"
# Network
# interface=
# address=
# netmask=
# gateway=
cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
pacman -Qo /usr/lib/udev/rules.d/*
/usr/lib/udev/rules.d/10-dm.rules is owned by device-mapper 2.02.97-1
/usr/lib/udev/rules.d/10-vboxdrv.rules is owned by virtualbox 4.1.20-2
/usr/lib/udev/rules.d/11-dm-lvm.rules is owned by lvm2 2.02.97-1
/usr/lib/udev/rules.d/13-dm-disk.rules is owned by device-mapper 2.02.97-1
/usr/lib/udev/rules.d/40-gphoto.rules is owned by libgphoto2 2.4.14-1
/usr/lib/udev/rules.d/40-hpet-permissions.rules is owned by jack2 1.9.8-2
/usr/lib/udev/rules.d/40-usb-media-players.rules is owned by media-player-info 17-1
/usr/lib/udev/rules.d/42-usb-hid-pm.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/50-udev-default.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/53-sane.rules is owned by sane 1.0.23-1
/usr/lib/udev/rules.d/60-cdrom_id.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/60-pcmcia.rules is owned by pcmciautils 018-4
/usr/lib/udev/rules.d/60-persistent-alsa.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/60-persistent-input.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/60-persistent-serial.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/60-persistent-storage-tape.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/60-persistent-storage.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/60-persistent-v4l.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/60-rfkill.rules is owned by rfkill 0.4-5
/usr/lib/udev/rules.d/61-accelerometer.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/61-gnome-bluetooth-rfkill.rules is owned by gnome-bluetooth 3.4.2-1
/usr/lib/udev/rules.d/64-md-raid.rules is owned by mdadm 3.2.5-2
/usr/lib/udev/rules.d/65-kvm.rules is owned by qemu 1.1.1-1
/usr/lib/udev/rules.d/69-cd-sensors.rules is owned by colord 0.1.21-2
/usr/lib/udev/rules.d/69-libmtp.rules is owned by libmtp 1.1.4-1
/usr/lib/udev/rules.d/70-infrared.rules is owned by v4l-utils 0.8.8-1
/usr/lib/udev/rules.d/70-power-switch.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/70-uaccess.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/70-udev-acl.rules is owned by consolekit 0.4.6-4
/usr/lib/udev/rules.d/71-seat.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/73-seat-late.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/75-net-description.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/75-probe_mtd.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/75-tty-description.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/77-nm-olpc-mesh.rules is owned by networkmanager 0.9.4.0-6
/usr/lib/udev/rules.d/78-sound-card.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/80-drivers.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/80-udisks.rules is owned by udisks 1.0.4-5
/usr/lib/udev/rules.d/80-udisks2.rules is owned by udisks2 1.94.0-2
/usr/lib/udev/rules.d/85-usbmuxd.rules is owned by usbmuxd 1.0.8-1
/usr/lib/udev/rules.d/90-alsa-restore.rules is owned by alsa-utils 1.0.25-3
/usr/lib/udev/rules.d/90-libgpod.rules is owned by libgpod 0.8.2-6
/usr/lib/udev/rules.d/90-pulseaudio.rules is owned by pulseaudio 2.1-1
/usr/lib/udev/rules.d/95-cd-devices.rules is owned by colord 0.1.21-2
/usr/lib/udev/rules.d/95-dm-notify.rules is owned by device-mapper 2.02.97-1
/usr/lib/udev/rules.d/95-keyboard-force-release.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/95-keymap.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/95-udev-late.rules is owned by systemd-tools 188-2
/usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/95-upower-csr.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/95-upower-hid.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/95-upower-wup.rules is owned by upower 0.9.17-2
/usr/lib/udev/rules.d/97-bluetooth-hid2hci.rules is owned by bluez 4.101-1
/usr/lib/udev/rules.d/99-systemd.rules is owned by systemd-tools 188-2
cat /var/log/pacman.log
[2012-08-28 12:27] Running 'pacman -Sy'
[2012-08-28 12:27] synchronizing package lists
[2012-08-28 14:51] Running 'pacman -S -u'
[2012-08-28 14:51] starting full system upgrade
[2012-08-28 14:53] upgraded gc (7.2.c-1 -> 7.2.d-1)
[2012-08-28 14:53] >>> Updating module dependencies. Please wait ...
[2012-08-28 14:53] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-08-28 14:53] ==> Building image from preset: 'default'
[2012-08-28 14:53] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-08-28 14:53] ==> Starting build: 3.5.3-1-ARCH
[2012-08-28 14:53] -> Running build hook: [base]
[2012-08-28 14:53] -> Running build hook: [udev]
[2012-08-28 14:53] -> Running build hook: [autodetect]
[2012-08-28 14:53] -> Running build hook: [pata]
[2012-08-28 14:53] -> Running build hook: [scsi]
[2012-08-28 14:53] -> Running build hook: [sata]
[2012-08-28 14:53] -> Running build hook: [resume]
[2012-08-28 14:53] -> Running build hook: [filesystems]
[2012-08-28 14:53] -> Running build hook: [usbinput]
[2012-08-28 14:53] -> Running build hook: [fsck]
[2012-08-28 14:53] ==> Generating module dependencies
[2012-08-28 14:53] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-08-28 14:53] ==> Image generation successful
[2012-08-28 14:53] ==> Building image from preset: 'fallback'
[2012-08-28 14:53] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-08-28 14:53] ==> Starting build: 3.5.3-1-ARCH
[2012-08-28 14:53] -> Running build hook: [base]
[2012-08-28 14:53] -> Running build hook: [udev]
[2012-08-28 14:53] -> Running build hook: [pata]
[2012-08-28 14:53] -> Running build hook: [scsi]
[2012-08-28 14:53] -> Running build hook: [sata]
[2012-08-28 14:53] -> Running build hook: [resume]
[2012-08-28 14:53] -> Running build hook: [filesystems]
[2012-08-28 14:53] -> Running build hook: [usbinput]
[2012-08-28 14:53] -> Running build hook: [fsck]
[2012-08-28 14:53] ==> Generating module dependencies
[2012-08-28 14:53] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-08-28 14:53] ==> Image generation successful
[2012-08-28 14:53] upgraded linux (3.4.9-1 -> 3.5.3-1)
[2012-08-28 14:53] upgraded lirc-utils (1:0.9.0-22 -> 1:0.9.0-26)
[2012-08-28 14:53] In order to use the new version, reload all virtualbox modules manually.
[2012-08-28 14:53] upgraded virtualbox-modules (4.1.20-1 -> 4.1.20-3)
[2012-08-28 14:59] Running 'pacman -U /tmp/yaourt-tmp-dp/PKGDEST.3fb/google-chrome-21.0.1180.81-1-x86_64.pkg.tar.xz'
[2012-08-28 14:59] upgraded google-chrome (21.0.1180.57-1 -> 21.0.1180.81-1)
[2012-08-28 15:00] Running 'pacman -U /tmp/yaourt-tmp-dp/PKGDEST.MgI/tunlr-0.1.5-1-any.pkg.tar.xz'
[2012-08-28 15:00] Running 'pacman -Sy'
[2012-08-28 15:00] synchronizing package lists
[2012-08-28 15:01] Running 'pacman -U /tmp/yaourt-tmp-dp/PKGDEST.Vic/tunlr-0.1.5-1-any.pkg.tar.xz'
[2012-08-28 15:01] upgraded tunlr (0.1.4-1 -> 0.1.5-1)
[2012-08-28 17:34] Running 'pacman -S extra/kdeedu-kmplot'
[2012-08-28 17:34] installed kdeedu-kmplot (4.9.0-1)
[2012-08-29 10:20] Running 'pacman -Syu'
[2012-08-29 10:20] synchronizing package lists
[2012-08-29 10:20] starting full system upgrade
[2012-08-29 11:07] Running 'pacman -S grub-bios'
[2012-08-29 11:07] removed grub (0.97-21)
[2012-08-29 11:07] Generating grub.cfg.example config file...
[2012-08-29 11:07] This may fail on some machines running a custom kernel.
[2012-08-29 11:08] done.
[2012-08-29 11:08] installed grub-common (2.00-1)
[2012-08-29 11:08] installed grub-bios (2.00-1)
[2012-08-29 11:48] Running 'pacman -Sy'
[2012-08-29 11:48] synchronizing package lists
[2012-08-29 11:48] starting full system upgrade
[2012-08-29 12:11] Running 'pacman -Sy'
[2012-08-29 12:11] synchronizing package lists
[2012-08-29 12:11] starting full system upgrade
[2012-08-29 12:11] Running 'pacman -S -u'
[2012-08-29 12:11] starting full system upgrade
[2012-08-29 12:15] upgraded firefox (14.0.1-1 -> 15.0-1)
[2012-08-29 12:15] upgraded firefox-i18n-it (14.0.1-1 -> 15.0-1)
[2012-08-29 12:15] upgraded gsmartcontrol (0.8.7-1 -> 0.8.7-2)
[2012-08-29 12:15] upgraded libwbclient (3.6.7-1 -> 3.6.7-2)
[2012-08-29 12:15] upgraded smbclient (3.6.7-1 -> 3.6.7-2)
[2012-08-29 12:15] upgraded samba (3.6.7-1 -> 3.6.7-2)
[2012-08-29 12:15] upgraded sane (1.0.22-9 -> 1.0.23-1)
[2012-08-29 12:15] upgraded syslinux (4.05-6 -> 4.05-7)
[2012-08-29 12:15] upgraded thunderbird (14.0-1 -> 15.0-1)
[2012-08-29 12:15] upgraded thunderbird-i18n-it (14.0-1 -> 15.0-1)
[2012-08-29 12:15] -> You can now set custom file descriptor ulimits for Tor in
[2012-08-29 12:15] -> "/etc/conf.d/tor" using the "TOR_MAX_FD" variable.
[2012-08-29 12:15] upgraded tor (0.2.2.37-1 -> 0.2.2.38-1)
[2012-08-29 12:56] Running 'pacman -U /tmp/yaourt-tmp-root/PKGDEST.K10/downgrade-3.0-1-any.pkg.tar.xz'
[2012-08-29 12:56] installed downgrade (3.0-1)
[2012-08-29 12:57] Running 'pacman -U /var/cache/pacman/pkg/linux-3.4.9-1-x86_64.pkg.tar.xz'
[2012-08-29 13:04] Running 'pacman -U /var/cache/pacman/pkg/virtualbox-modules-4.1.20-1-x86_64.pkg.tar.xz'
[2012-08-29 13:05] Running 'pacman -U /var/cache/pacman/pkg/linux-3.4.9-1-x86_64.pkg.tar.xz'
[2012-08-29 13:05] Running 'pacman -R virtualbox-modules'
[2012-08-29 13:05] Running 'pacman -Rd virtualbox-modules'
[2012-08-29 13:05] Running 'pacman -Rdd virtualbox-modules'
[2012-08-29 13:06] removed virtualbox-modules (4.1.20-3)
[2012-08-29 13:06] Running 'pacman -U /var/cache/pacman/pkg/linux-3.4.9-1-x86_64.pkg.tar.xz'
[2012-08-29 13:06] >>> Updating module dependencies. Please wait ...
[2012-08-29 13:06] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-08-29 13:06] ==> Building image from preset: 'default'
[2012-08-29 13:06] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-08-29 13:06] ==> Starting build: 3.4.9-1-ARCH
[2012-08-29 13:06] -> Running build hook: [base]
[2012-08-29 13:06] -> Running build hook: [udev]
[2012-08-29 13:06] -> Running build hook: [autodetect]
[2012-08-29 13:06] -> Running build hook: [pata]
[2012-08-29 13:06] -> Running build hook: [scsi]
[2012-08-29 13:06] -> Running build hook: [sata]
[2012-08-29 13:06] -> Running build hook: [resume]
[2012-08-29 13:06] -> Running build hook: [filesystems]
[2012-08-29 13:06] -> Running build hook: [usbinput]
[2012-08-29 13:06] -> Running build hook: [fsck]
[2012-08-29 13:06] ==> Generating module dependencies
[2012-08-29 13:06] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-08-29 13:06] ==> Image generation successful
[2012-08-29 13:06] ==> Building image from preset: 'fallback'
[2012-08-29 13:06] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-08-29 13:06] ==> Starting build: 3.4.9-1-ARCH
[2012-08-29 13:06] -> Running build hook: [base]
[2012-08-29 13:06] -> Running build hook: [udev]
[2012-08-29 13:06] -> Running build hook: [pata]
[2012-08-29 13:06] -> Running build hook: [scsi]
[2012-08-29 13:07] -> Running build hook: [sata]
[2012-08-29 13:07] -> Running build hook: [resume]
[2012-08-29 13:07] -> Running build hook: [filesystems]
[2012-08-29 13:07] -> Running build hook: [usbinput]
[2012-08-29 13:07] -> Running build hook: [fsck]
[2012-08-29 13:07] ==> Generating module dependencies
[2012-08-29 13:07] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-08-29 13:07] ==> Image generation successful
[2012-08-29 13:07] upgraded linux (3.5.3-1 -> 3.4.9-1)
[2012-08-29 14:47] Running 'pacman -Sy'
[2012-08-29 14:47] synchronizing package lists
[2012-08-29 14:49] Running 'pacman -S -u'
[2012-08-29 14:49] starting full system upgrade
Last edited by thujone (2012-09-19 12:18:51)

because the report opener said that those freezes fixed with the 'futex' patch (included in 3.14-5).
As he says:
for those who have again problems despite the patch it means probably that there are another bugs further in the source code of kernel 3.14, bugs who are not necessarily related to the "futex problem"
i will try a clean profile, thanks.
Last edited by tritonas00 (2014-04-16 13:22:51)

GE70 dual booting with linux

Has anyone installed linux as a dual booting OS on their MSI laptop? I've gone through a lot of stuff online to try and install, but the UEFI isn't recognizing anything I have as far as live booting dvd or usb. I've turned off secure boot and fast boot. I can get it to boot off the disk/usb in Legacy mode, but if I install from there it installs as MBR which can cause problems. If anyone's had success, please, let me know.
Thanks!
B

If the laptop came with Win 8 pre installed then bios is set to UEFI, a new measure made by Microsoft to ensure nobody tries to boot other system rather than windows. The only way to boot a linux is to change bios to Legacy and then try to boot, after that, to boot windows you have to change that setting again, so not very efficient really.
My advice is to reinstall windows but in Legacy mode, there is software on the internet to check your windows key and reinstall.
All in all, while you have Windows in UEFI mode forget about dual booting, reinstall windows on Legacy or just erase it and go for linux.

How to use "start" and "duration" with HLS stream

Hi all,
is it possible to use "start" and "stop" with HLS stream like rtmp stream?
If yes, how?
thanks in advance.

Hi,
This is completely player side fucntionality you are asking for. However, I guess default player that comes on safari (iPad), quicktime has the player timeline with stop and start option. But if not, you can create your custom player using exposed api of AVPlayer. Check-out AVPlayer api's.
FMS, by nature of protocol will respect the request to get the data(in case of client-play-start) and will not automatically push the data to the client if not asked for by the client (as in case of client-play-stop).
Thanks

How to avoid starting a page with line breaks?

Hello. I've just started to refine my Master's thesis and some of the topics moved up and down as I edited their contents. The problem is that in some cases the topic breaks right after the title, and the rest of the contents just move away to another page. Is there any way to avoid starting a page with line breaks or broken topics?

At the end of your title, you didn't inserted a line break but a paragraph break (carriage return).
Acivate the mode "Show hidden characters"
Select the carriage return (paragraph break)
Delete it
Press Shift + return to insert a true line break.
It may be useful to apply that several times if you inserted several carriage returns between the title and the first filled line.
Yvan KOENIG (VALLAURIS, France) 15 mai 2011 19:40:14

How can I start oracle databse in linux ?

I have rebooted the machine and oracle database did not start.
How can I start manually oracle database ?
Thanks a lot !!!

sqlplus
connect as sysdba
startup pfile=<Path to your init.ora>

How do i start a chat with someone?

when i set it up -- i used my aol im account.
but i already have aim on this computer -- so i guess that was a mistake.
i thought i switched over to my .mac account -- but it's acting weird.
i have a friend online right now that i want to contact -- and start a chat with -- but when i try and add participants... i click "Other..." put his name in as "person i want to start the chat with" but there are no services in the drop down menu to choose from.
any help would be much appreciated!
thanks in advance

Hi,
So you have iChat with an @Mac name as your Screen name.
Do you have anyone in you Buddy List ?
However you do know a Buddy's Name and you are staring a New Chat with him.
I am not sure where you are reading "Other"
A New Chat from the File Menu will start a group chat and people in your Buddy List can be dragged there and Invited
A New Chat with Person will ask you to select an account Type/Service and the Buddy's name.
Right Clicking a Buddy in the Buddy list will produce a Pop Up menu to chose a chat type if that is what you meant as will highlighting the Buddy and using the Buddies menu.
If you started a single chat with someone then you have to start a Group chat before you can invite an extra Buddy.
11:12 PM Saturday; November 3, 2007

Question about Portege 2000 boot with Linux

Hi everyone,
My Portege 2000 PIII 750MHz, 512 RAM, 20GB is simply driving me mad. I would like to try to install Linux, and have downloaded some distros to try it. The point is I am using an external CD/DVD reader, with a 16 bit pc card connector cable. Booting starts until the BIOS is involved, but when it gets to OS drivers being involved, booting hangs up, with every distro, except of course win XP, with which it installs perfectly fine.
Anybody got any suggestions on how to proceed? I really would like something lighter than WXP on my machine. Thx!

Hi
I do not have this Portege but I know that Toshiba recovery image (WXP) contains driver for external ODD and the installation can be done without any problem.
Maybe you can find some useful tips under http://newsletter.toshiba-tro.de/main/index.html

Windows 8.1 will not boot after setting up dual-boot with Linux Mint 17.1 Cinnamon

In which forum should I ask this question?
After installing Linux Mint onto a partition of my hard drive, Windows 8.1 is listed a choice to boot into after restarting my computer, but will not boot up. It suggests a boot repair and to obtain Windows 8.1 from my distributor. I have seen on other forums
that this has not worked, and I was wondering if anyone here had any suggestions for how to proceed.
Thanks in advance.

You can try them over here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

[solved] Systemd hangs sometimes on boot with linux-ck

Hi i have linux-ck kernel installes and a Systemd-only init.
Sometimes it hangs on boot and then, instead of starting X / LXDM, drops to a commandline login prompt. It does not happen on every boot and never happend with arch stock kernel so far. I cant't login to search in systemd journal for errors because the keyboard does not work corret, e.g. if I press "o" it writes a "6"
here a shot from last time it happend. In the shot the last messages from Systemd are visible, but sometimes the screen is cleard before the login prompt appears.
Last edited by SiD (2012-09-08 07:51:58)

ok I activated syslog-ng and found this in the logs from last boot that not worked
Xorg log
# grep -e EE -e WW /var/log/Xorg.0.log.old
[ 1.932] Current Operating System: Linux sunny 3.5.3-2-ck #1 SMP PREEMPT Mon Aug 27 15:48:39 EDT 2012 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1.944] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1.944] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1.948] (II) Loading extension MIT-SCREEN-SAVER
[ 2.133] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 2.133] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 2.133] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 2.133] (EE) NVIDIA(0): *** Aborting ***
[ 2.133] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 2.133] (EE) Screen(s) found, but none have a usable configuration.
lxdm log
# cat /var/log/lxdm.log.old
** Message: find greeter (nil)
** Message: find idle (nil)
** Message: add xserver watch
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.8-1-ARCH x86_64
Current Operating System: Linux sunny 3.5.3-2-ck #1 SMP PREEMPT Mon Aug 27 15:48:39 EDT 2012 x86_64
Kernel command line: root=UUID=3e32c396-fffb-4e00-b513-08db5c5da177 i915.i915_enable_rc6=1 ro initrd=../initramfs-linux-ck.img BOOT_IMAGE=../vmlinuz-linux-ck
Build Date: 27 August 2012 08:04:39AM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 3 18:45:01 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
NVIDIA: could not open the device file /dev/nvidiactl (No such device or address).
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Server terminated with error (1). Closing log file.
** Message: exit cb
** Message: free session
arc 1
and in everything log
Sep 3 18:45:03 localhost systemd[1]: Startup finished in 1s 157ms 589us (kernel) + 2s 645ms 840us (userspace) = 3s 803ms 429us.
Sep 3 18:45:04 localhost dbus-daemon[317]: dbus[317]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 3 18:45:04 localhost dbus[317]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 3 18:45:04 localhost dbus[317]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Sep 3 18:45:04 localhost dbus-daemon[317]: dbus[317]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Sep 3 18:45:06 localhost systemd[1]: lxdm.service: main process exited, code=exited, status=1
Sep 3 18:45:06 localhost systemd[1]: Unit lxdm.service entered failed state.
Sep 3 18:45:06 localhost dbus-daemon[317]: dbus[317]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 3 18:45:06 localhost dbus[317]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 3 18:45:06 localhost dbus[317]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Sep 3 18:45:06 localhost dbus-daemon[317]: dbus[317]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Seems to me there is a problem loading the Nvidia driver. Don't know if the dbus errors matter ...
EDIT:
Makes sence to me, without a graphics driver loaded X / LXDM can not start.
Last edited by SiD (2012-09-03 17:12:23)

How do I start on boot with linux?

Similar Messages

Maybe you are looking for