How do I store and save photos in a file so that I can clear the main window

How do I move and store photos in an album so that I can delete them from the main screen as this is getting very clogged up. Thanks

You don't "delete them from the main screen". You can increase the size of thumbnails - note the slider on the bottom of the window - and scroll.

Similar Messages

How to create a dialog window with no button that opens along with the main window?

When the main window is open, the dialog window opens up immediately and can be closed by key press. At other times, when the next step, ie: decision, comes to, the another dialog window pops up again and is again closed by key press. Does anyone know how to do? Use the sub-Vi? notification method? occurrence method?
And another thing: how to create a reusable dialog window with no button so that different messages can be sent to it and it can closed by key press. And how to pass the string to the title of the dialog window programmatically?

For your functionality (If I understand it right), nothing needs to be in the event structure. Pressing any key just triggers the event, thus finishing the VI (there is no while loop).
Could you tell me what you mean my "it won't run properly"? Make sure that the front panel of the subVI is closed before starting the main VI. Remember that the subVI is set to "open when called" and "close afterwards if originally closed". So, if you had the panel open already, it won't of course close when finished!
(Actually, the problems is worse when you have the subVI panel open when starting the main VI. you get a catch22 and labVIEW locks up because (1) the subVI is set to dialog and grabs all attention but (2) it has not been
called, thus the event cannot be triggered. So don't do that!!!! As a quick workaround, add the modification shown in the attached image to ensure the panel of the subVI is closed.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
CloseNoButtonDialog.gif ‏3 KB

How can I convert the metadata tags on my mp4s to xml files so that they can be read in Windows Media Center?

I have a library with almost 3000 movies and TV shows that I have fully tagged. However, I have decided to start using Windows Media Center and it does its metadata tagging through XML files. I wanted to know if anyone could tell me if there was a way to extract the metadata from those mp4s and convert them to a format that WMC could read? Thanks!!!!

iTunes can make XML playlists so it might be all you need, I made a simple one file playlist and exported it from iTunes. The result is shown below. In principle I could delete the playlist and the entry from the library, as long as I don't delete the file, then later reimport the XML playlist file. I haven't tested this particular scenario, but I assume that iTunes will read all the properties as listed unless it can read some kind of tag from the file itself in which case the current value of the tag would take precedence.
What I don't know is what media center would make of this file, or what its files look like, however assuming they have a similar structure that can be decoded then it should be possible to read data from the iTunes library and write out a text file that will make sense to media centre.
Video Test.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Major Version</key><integer>1</integer>
<key>Minor Version</key><integer>1</integer>
<key>Date</key><date>2013-09-26T23:30:26Z</date>
<key>Application Version</key><string>11.1</string>
<key>Features</key><integer>5</integer>
<key>Show Content Ratings</key><true/>
<key>Music Folder</key><string>file://localhost/E:/iTunes/iTunes%20Media/</string>
<key>Library Persistent ID</key><string>CCF046191585EA85</string>
<key>Tracks</key>
<dict>
<key>155170</key>
<dict>
<key>Track ID</key><integer>155170</integer>
<key>Name</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Artist</key><string>Abbott & Costello</string>
<key>Album Artist</key><string>Abbott & Costello</string>
<key>Album</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Genre</key><string>Comedy Clip</string>
<key>Kind</key><string>MPEG-4 video file</string>
<key>Size</key><integer>110483524</integer>
<key>Total Time</key><integer>532096</integer>
<key>Year</key><integer>1950</integer>
<key>Date Modified</key><date>2013-06-19T17:35:18Z</date>
<key>Date Added</key><date>2012-12-01T17:30:57Z</date>
<key>Bit Rate</key><integer>156</integer>
<key>Comments</key><string>www.dvdvideosoft.com</string>
<key>Artwork Count</key><integer>1</integer>
<key>Persistent ID</key><string>5AF2C490D1E065CD</string>
<key>Track Type</key><string>File</string>
<key>Has Video</key><true/>
<key>HD</key><false/>
<key>Video Width</key><integer>1136</integer>
<key>Video Height</key><integer>640</integer>
<key>Location</key><string>file://localhost/E:/iTunes/iTunes%20Media/Home%20Vide os/Abbott%20&%20Costello_%20_Two%20Tens%20for%20a%20Five_%20&%20_Who's%2 0on%20First_.mp4</string>
<key>File Folder Count</key><integer>3</integer>
<key>Library Folder Count</key><integer>1</integer>
</dict>
</dict>
<key>Playlists</key>
<array>
<dict>
<key>Name</key><string>Video Test</string>
<key>Playlist ID</key><integer>1930541</integer>
<key>Playlist Persistent ID</key><string>30BF2769C94F7F29</string>
<key>All Items</key><true/>
<key>Playlist Items</key>
<array>
<dict>
<key>Track ID</key><integer>155170</integer>
</dict>
</array>
</dict>
</array>
</dict>
</plist>
Such files are easier to interpret if opened with Notepad++.
tt2

How I save text to a PDF so that I can email the changes?

I just downloaded adobe acrobat reader for my iPhone 4S. Every time I add text to a PDF and then email it, the recipients never receive the annotated file. They only receive a blank PDF. I don't see any feature to save changes. Please help.

The changes are saved automatically. Unfortunately, some PDF viewers don't support viewing annotations. One such viewer is the PDF viewer built into iOS and included in the iOS mail app, Safari and other apps like dropbox. Please ensure that your recipients are viewing the PDF in a viewer that supports annotation viewing like the Adobe Reader for iOS, Android, Windows Store, MacOSX or Windows. Some of our competitor's apps support annotation viewing as well, but we're obviously biased towards our own =).

How do I access my iCloud keychain on my iPhone so that I can see the passwords?

I need to see my passwords that are stored in my iCloud keychain. How do I do that?

At the moment, you can only do that via Safari-Preferences on a Mac.
With kind regards
David

HT1364 How do you convert iTunes movie files so that you can watch them on Windows Media Player?

Hello. For school, I am supposed to make a video mash-up from a movie. I bought the movie I needed, but now I can't open it in Windows Movie Maker to edit it.

Oh well then, thanks anyways! I guess I'll have to find something else to do.
Do you have any idea how people get movie clips for their videos on YouTube?

I need to capture streaming audio and save to a wav file

I need to be able to capture an audio stream delivered via ethernet using UDP protocol and then save to a wav file.
I currently can capture the data stream but do not know how to format the data to save it to a file. Our format is 16KS/s, 16bit, PCM, no compression.

Did you do the thing about searching in the example database. Let us use that as base for discussion. Those who put in some effort will be rewarded. Also check out the AU file format http://en.wikipedia.org/wiki/Au_file_format As it is big-endian http://en.wikipedia.org/wiki/Big-endian the numbers can be stored as is in Labview. Must players,matlab, etc can use the AU file format.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Catch the image of JTree and save it as a file

There is an JTree and it has a few nodes.
And there, I want to capture both the image of JTree and
the images of it's child nodes as they show in screen.
if possible, I want to capture image of all expanded nodes in tree and
save them as jpg file.
I try to capture the Image of JTree from JTree.createImage() method.
and I also tried to capture the images of child nodes
from JTree.getComponents() and capture images all of child nodes as they were.
I,however,get to know the method
Component.createImage() doesn't return the image that shows in screen as it was.
could anybody tell me the answer?

Hi,
don't know if I got you right, but what you want is a "screenshot" of the JTree, right ?
Try to paint the JTree in a BufferedImage and encode this as JPEG or whatever.
BufferedImage theImage = new BufferedImage(
      owner.getWidth(), owner.getHeight(), BufferedImage.TYPE_INT_RGB);
      Graphics g = theImage.createGraphics();
      g.setClip( 0, 0, owner.getWidth(), owner.getHeight());
      owner.paint( g);owner is your JTree or any other component you want.
Hope that helped.

How to close the main window from Popup

hello all,
i need to close the main window from a popup, so i create a popup and after clicking on close button of this popup, should also the main window be closed.
how can do this please?
BR

Hi
Please go through this.. check thomas reply
Re: Close Main Window directly on action on Pop up window
also check this..
how to close main window on click of a button on popup window
cheers,
Kris.
Edited by: kissnas on May 12, 2011 5:06 PM

How do I download and saves html files off my website to store and save using Dreamweaver CS3?

How do I download and saves html files off my website to store and save using Dreamweaver CS3?
I need to save all files from web and store onto a drive to reupload to a new domain name. I use Dreamweaver CS3.

First define your Local Site folder in Dreamweaver. DW will use this folder to store your site files.
Go to Manage Sites > New or Edit site. See screenshots.
Servers: Enter your remote server's log-in details. When complete, hit TEST to see if the connection is working. If all is well, hit SAVE.
From the Files Panel (F8), click on Remote Server to show the files that are currently there. Click the green Down Arrow to GET files from remote server to your local site folder.
Nancy O.

How to read, write and save a file?

Hello everybody,
I have a question about reading , writing and save something into a file (etc text file)
For example: I want to create a file of football in which there are many key words as: "football", "touch down", "quarterback", "ball", "linebacker", "coach", "player"...
Now i want to open to read, write one more word "head" ( synonym with "coach") and store it for using next time. How could i do that?
Could anybody help me about that?
Thank you very much in advance.
still_learn

take a look in the API about FileInputStream and FileOutputStream

How do I store and delete files on the iphone

how do I store and delete files on the iphone

Files/documents need to be stored/associated within an app on the iPad, unlike 'normal' computers there is no file system which allows you to save files with no means of being able to read/use them. So if you want to store a file on the iPad you first need an app on the iPad that supports that file type.
How you then get the file onto the iPad and into the app will depend on what the app is and what transfer method(s) it supports. e.g. some apps use the file sharing section at the bottom of the device's apps tab when connected to your computer's iTunes, some apps support the transfer of files via your wifi network, the iBooks app uses the Books section of your iTunes (and the device's Books tab) to sync content, and other transfer methods include email attachments, Dropbox etc. The file is then found by going into your chosen app and opening/using the file.

How do i add and delete photos from the screensaver preference window

How do i add and delete photos from the screensaver preference window?

Hello, sassy4sue.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when creating or editing iPhoto albums that you are using as a screen saver.
Mac Basics: Using Screen Saver when your screen is idle
http://support.apple.com/kb/ht2485
Cheers,
Jason H.

Store and save cycle count data

My goal is to read the number of cycles in a while loop, take that number and save it to a file. Basically, each time the program runs, there will be X number of cycles the user performs (totally random). Say one person does 50 cycles, the next does 253, etc... I would like to generate a spreadsheet locally that will have a stamp of ALL cycles performed.
How is this doable? Unfamiliar with techniques using variables, so please extrapolate!
Here's the code. I need to know how many times the read matches the write.
Thank You!

Store the cycle count in a shift register. When the user hits "done" or "stop", write the cycle count to a dedicated file. You seem to want to remember each time it was cycled and the number, so write each new cycle count to a new line in the file (i.e. make Append True). When the program starts back up, or resumes test, read the lines into an array and add the array. That's your total cycle count to start from.
Richard

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

This is the Microsoft forum site that parallels what Apple has:
Office for Mac forums
It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac

How do I store and save photos in a file so that I can clear the main window

Similar Messages

Maybe you are looking for