How do I take a thermocouple reading with a pci6025E?

How do I take a thermocouple reading with a pci6025E? I have seen some postings with scxi-1112 modules which I do not have. I need advice from the ground up. Do I need external circuitry, can I just wire both leads of the thermocouple to Ain0 differential pins, what vis are necessary in the actual programming... If there is an example program or anything else that might seem relavent? I appreciate any help.

This is most probably a result of multiple factor that make the measurement imperfect:
- You're not using signal conditioning, so your resolution is definitely very reduced. Any temperature drift in the board could cause a big difference in the reading. I recommend you run your vi for approximately half an hour, unplug the accessory and perform a self calibration. This will have the board at the operational temperature you're expecting and will give you the best results.
-I personally would recommend using a different sensor type (RTD or Thermistor) as the CJC source, in order to obtain an accurate measurement, otherwise you have a bit of a "chicken and egg" problem, because you're using thermocouple 2 as the CJC for thermocouple 1, but what are you using as the CJC source of thermocouple 2?
- Are both your thermocouples of the same type and manufacturer? Due to the nature of the thermocouple itself, you can find slight variations between thermocouples from different vendors, due to the purity of the metals used. While this would usually be almost impossible to detect, it might be driving your voltage just enough to be in the next detectable voltage step (again, due to the reduced resolution).
- I've worked with temperature sensors for a while, and I'd still recommend that you try some sort of signal conditioning in order to increase your accuracy. Even a small amplifier and a passive lowpass filter will do great. I know you said you don't have SCXI, but if you want some lower cost ready to use applications you might consider looking at the SCC Carriers and modules we have.
I hope these suggestions help. Please let me know if you have any other questions.
Daniel

Similar Messages

  • How do I take a screen shot with my iphone 5S?

    How do I take a screen shot with my iphone 5S?

    Press the "Home" button and the sleep/wake button at the same time to take a screen shot.

  • How do I take 300 dpi photos with my iPhone 4s? And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.

    How do I take 300 dpi photos with my iPhone 4s?
    And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
    I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
    Your time and assistance in appreciated.
    Thanks

    Thanks Tonefox!
    After looking at a few of the links I found a mathematical equation that assisted me.
    Inches = Pixels/DPI
    eg: 3 inches = 300 pixels/100 DPI
    Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
    Width 3264 pix/ 300 DPI = 10.88 inches
    Height 2448 pix/ 300 DPI = 8.16 inches
    Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
    Which is great!
    So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
    From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
    Further clarification will be much appreciated. Thanks

  • How to fill forms in adobe reader with lithuanian fonts?

    How to fill forms in adobe reader with lithuanian fonts?
    when i switch on my pc alt+shift to lithuanian language i can only use 2 lithuanian fonts, for other lithuanian fonts i get only blank
    could someone help me to solve this case?

    Adobe Acrobat.  A bit expensive just to change the document background...

  • How do I take a screen shot with MacBook Pro?

    Thought I could take a screen shot with my MacBook Pro but can't find any instructions.  Help

    Press the Shift, Command, and 3 keys to capture the entire screen.
    Press the Shift, Command, and 4 keys to capture a draggable part of the screen.
    Press the Shift, Command, and 4 keys followed by the spacebar to capture a window.
    Open the png on the desktop.
    (82116)

  • How do I take 4 frequency readings with a USB-6251?

    Can I take frequency readings on 4 different digital input channels of my USB-6251?  I am using 1 of my counter channels for a Pulse-Width output.  Can anyone show me some example code for this or explain how to attempt this?
    Jeremy Backer
    CLAD

    Hi JMBacker,
    You can make a frequency measurement from
    you digital lines, but you would have to do it in software. To actually
    take a frequency measurement in hardware you would have to use a
    counter input.
    In order to do this with your digital
    inputs you will have to know your sampling rate, and do some
    manipulation to the array of values that you get when reading the
    values from the port. You would only be concerned with the 4 lines of
    the port you configure. Once you store that data in the array you would
    have to check for the number of samples between two transitions from 0
    to 1, then multiply that by (1/sampling frequency) and take the inverse
    of that value. This will give you the frequency value of one period of
    your input signal. You would have to do this process with each of the 4
    desired input lines in one port. 
    Attatched is an
    example program that takes that measurement and computes the frequency
    in software. This is in LabVIEW version 8.2.1, but can be used in any
    version at or newer than that version.
    Chris N WhiteHigh Speed Products Group
    Attachments:
    Meas Freq-Digital_mutli_line.vi ‏34 KB

  • How to export PDF in Adobe Reader with changed background

    Hey Folks,
    I change background and text color by going to Preferences -> Accesebility and when I save the file with changed background it is still the old background. How to I save/export this PDF to have changed background?
    Thanks a lot!
    Krioni

    Adobe Acrobat.  A bit expensive just to change the document background...

  • How to mark emails as unread/read with MFE?

    Hi folks,
    I am a newbie on MFE running on a Nokia E71. Works great but I havent figured out how to mark emails as unread.
    Any suggestions where to find this function in the MFE client?
    Thanks and best regards,
    Jesper

    I don't know how this feature works in Outlook / Entourage... knowing Microsoft, it's probably proprietary and does not follow certificate standards, but that's a guess. If they used standard certificate technology, in order for you to send mail encrypted to your client, she would have to have sent you a digitally signed message. Then, you can send her an encrypted e-mail. If you start an e-mail message to her, is the little lock icon to the right of the From field black or gray? If it's black, you've already got her certificate, and just have to click that lock to encrypt the message. If it's not, you don't have her certificate, and she will need to send you a signed message.

  • How can I take raw image files with my iPhone?

    I want raw image files from my iPhone so that I can process them with ACR.

    The phone only works in one resolution. You cannot reduce it. The back camera has a higher resolution than the front camera. That is in the specifications. You can check the camera information in the User Guide here. http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • How do i switch my CS6 from Windows to my Mac? How can i take my license key with me?

    I am a teacher and started to use all my programs on my MacBook Pro now. How do i switch my Windows Version of CS6 to a Mac Version, without having to buy a new Key? I am not using the Windows version anymore.

    http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l
    Mylenium

  • How can i take out a warranty with an apple product?

    hi, i have recently (on the 23rd of february 2014) purchased an apple ipod touch 5th generation from rakutens play.com. i would like to register my ipod for the apple hardware warranty (1 year). any help please? thanks in advance.

    The Apple Product Registration website is closed.
    If you’re trying to register an Apple product, chances are it’s already registered. Most Apple products can be registered when you turn them on for the first time and begin the setup process. Service and support for your Apple product are linked to its serial number, so it’s OK if you don’t register it. If you'd like to check the service and support coverage for your Apple mobile device or computer, click here.
    ll you can do is check your coverage as roaminggnome said

  • Moving to another state without computer. how do I take itunes with me?

    Im moving to another state without my computer. How can I take my itunes library with me for when I eventually get a new computer?

    Copy your iTunes folder to a USB flash drive if it will fit, otherwise to a portable flash drive.  When you get a computer, copy the folder in.

  • How do I take panarama pictures on iPhone4s

    How do I take a panarama picture with iPhone 4s?

    you currently can't take it with the built IOS camera, however you can download an app like this http://itunes.apple.com/us/app/autostitch-panorama/id318944927?mt=8  see if that suits your needs if it doesn't then do a search in the app store.
    Or you can wait for the new IOS 6 to come out - as it will have that function.

  • How do i take one layer with multiple selections...

    how do i take one layer with multiple selections and make those selections their own layer?

    Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
    Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

  • I share an iTunes account with my siblings. So their contacts appear on my phone too. How can I take it off?

    I share an iTunes account with my siblings. So their contacts appear on my phone too. How can I take it off?

    You can share the same Apple ID in
    Settings > iTunes & App Store > Apple ID: here
    But for all other Apple services like:
    FaceTime, iMessage, iCloud, etc, one of you should use a different Apple ID.

Maybe you are looking for