How do I tell how many access points I have online? WISM module in 6509

Does anyone know a way to view how many access points are online using the WISM module or another software tool. I know CiscoWorks will acccomplish this but it is too expenseive.

Hi Rick,
You can use this command :)
show ap summary
Hope this helps!
Rob

Similar Messages

TS3899 I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any sugges

I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any suggestions?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

How many break points and watchpoints are allowed in ECC 6.0

Hi,
Can any one say how many break points and watchpoints are allowed in ECC 6.0

Hi ,
A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.Max 30 breakpoints we can use.
There is a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change ie...Watchpoints allow you the option of monitoring the content of individual variables.The Debugger stops as soon as the value of the monitored variable changes.You can use max of 5 watchpoints.
Difference
1. Break Point.
At particular LINE of SOURCE CODE,
the system will STOP there.
2. Watch Point.
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
(For this, we have to give some
VARIABLE NAME & VARIABLE VALUE - with relational operator)
When this CONDITION gets satisfied,
(anywhere during the execution of the program),
the system will AUTOMATICALLY STOP THERE.
(EG when the value of matnr reaches the specified value)
That is the purpose of WATCHPOINT
(the system will WATCH it, like a dog)
Please go through this link:
Watchpoint Vs breakpoint
http://help.sap.com/saphelp_nw04/helpdata/en/c6/617cdce68c11d2b2ab080009b43351/content.htm
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger. Watchpoints allow you the option of monitoring the content of individual variables.
The Debugger stops as soon as the value of the monitored variable changes.
In addition, conditions can be specified. The Debugger also checks whether such a condition is fulfilled.
For more details...
http://help.sap.com/saphelp_nw04/helpdata/en/c6/617cd9e68c11d2b2ab080009b43351/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/792442db42e22ce10000000a1550b0/frameset.htm
If satisfied, rewards me..
Kind Regards
Yogesh

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How many touch points will there be in JavaFX 2.2

I know 2.2 will support multi-touch. Exactly how many touch points will be possible?

Hello, maximum number of touch points is limited only by capabilities of the used hardware and underlying operating system, there is no such limitation in FX itself.

How do you tell how many Safari's you have open?

I am new MacBook user and am haven't figured out how to tell how many Safari windows I have open or how to quickly navigate between them. When using XP I would just click on the IE I want from the taskbar, or if they are grouped select the one I want from within in the group.
For Safari it appears I can either click on Windows -> select from the bottom of the list, or click and hold the Safari icon and wait until a list appears and then select from that list. Both of these options seem slow and laborious for a keyboarder.
- Is there a way to make the individual Safari's show up when I do a Command -> Tab?
- Or is there some functionality I am just unaware of to flip between Safari windows?

Hi
Welcome to Apple Discussions and Mac Computing
I am new MacBook user and am haven't figured out how to tell how many Safari windows I have open or how to quickly navigate between them.
The best way to navigate with Safari is to activate Tabs via the Safari Menu (at the top of the screen, to the right of the Apple Menu)>Preferences. In the Preference panel, click on Tabs and check the 3 boxes.
Using your "hot keys" Command/T keys will create a new tab.
In the browser window, various Tabs that are opened will appear below the Tool Bar (where the web site address is displayed). Clicking on a tab takes you from one site to the next (similar to what you see in Internet Explorer (where the Tabs are along the bottom of the screen).
If you install 3rd party add-on Glims, you'll add a number of very useful features to Safari, including more options with the Tabs. Once installed, you'll find the Glims options as a separate panel in Safari Preferences panel.
Post back

Does anyone know how many devices one can have on one apple ID?

Does anyone know how many devices one can have on one apple ID?

The names are for your benefit. The devices are identified by serial number in iTunes. iTunes knows which device is which no matter what you name the devices. It works the same way with iCloud. You can name all three devices Fred - and iTunes can tell them apart - but like I said, you want to give them different names for your benefit.

How many tasks can I have in NI-DAQmx system?

I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
I am designing a new test platform that will run on C# (because we like object oriented text based programming and because the IDE is free). For hardware we'll use your PXI modules (because your hardware is ultra-reliable). I'm starting with the following PXI modules 6259, 4072, 6509, 2575, and 2569, but we made add other modules later as future requirements demand. I am doing the system software architecture now. I've done some dabbling with Ni_daqmx, and I loathe "tasks" and "channels", but am determined to make them work.
The difficulty I'm having revolves around the overhead with setting up tasks and channels and with the concept of tasks and channels. Help hasn't helped much. Tasks seem to work great if you intend to always collect the same large amount of data from many sources and always will do it in exactly the same way.
We want something much more akin to random access memory. We'll have UUTs of different kinds coming on and off at random times. Sometimes a test will need a simple DC voltage, and other times another test will need 2 seconds worth of data at 1MS/s. It can cost around 150msec to make that change (stop the current task, creat another one, configure anohter channel, start up a new task, blah, blah, task this, channle that - for the life of me I can't understand what this damn taks concept does for me but make matters more complicated and bog down my system).
I can just barely glean from the help that I can have only one analog input task at once, but I can have sevferal taks of several different kinds running at the same time ( a digital output task and another task for digital input, and another task for analong input, etc.) . It does seem that I can set realys without having to put them into a channel and a task (Thank goodness for that - I just wanna turn on a relay I have no idea what a relay "channel" might be.)
In the PXI system I described above I'll have two devices that are analog input devices, the DMM and the Daq. Even with two devices, can I only have one analog input task running? Does that mean I've got to waste 150msec just to switch from the DMM to the Daq? (Do you understand my frustration with "tasks"? - I should be able to say "read DMM" and turn around and say "read Daq channel 0" without having to jump thru task and channle hoops and waste a bunch of time doing it).
I'll also have Daq digital IO and two 6509 digital io modules. Do I have to cram all of that into some "task" concept too? The Daq card has got many other kinds of wonderful capability (frequency measurement, counters, analog output). How many tasks can I have for that stuff? On the DMM card I can measure capacitance amoung other things. Will I have a capacitance task? The idea of a "capacitance task" hurts my head.
Golly I hate tasks. Please help.
I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
Dave

Dave,
Thanks for posting to the NI Forums.
For the good of the community we like to keep conversations that start of the forums on the forums rather than moving to email. If you want to move to email support I recommend contacting NI through the email route.
I will answer your questions here. If you need more direct contact please feel free to contact us through [email protected].
For some the concept of tasks may seem daunting, however, for many applications it makes life a lot more simple. A task at a very fundamental level is simply a collection of channels with a single type (AI, DI, DO, etc.) and a single timing configuration (sampling rate, continuous vs. finite, etc.). It is a way to organize configuration data.
The concept of a task is an abstraction like OO programming. Like OO programming it may take some time to understand but can be a time saver in the end. Also like OO programming it does add some initial programming overhead. It is much more simple to simply type a printf statement in C than to have to create a bunch of classes just to output text to the screen. You can accomplish the same thing not using OO programming, but in the end OO programming is extremely useful, because it groups useful information and methods together in one place.
With very simple applications OO programming sometimes does not make sense. But as a program gets more and more complex OO programming becomes more and more useful. It takes some learning but it is worth it.
I believe the concept of a task does the same thing. It does not change the actual functionality of the device or add excessive overhead. It is just an abstraction that pulls configuration data about a specific "task" and methods the task can perform into a single logical place.
Unlike the entirely abstract concept of an Object, a Task is run on a physical device and therefore has physical limitations. You can create multiple tasks of the same type, but you can only run a one timed task of each type on a single board at a time. In other words you can have multiple AI tasks running at the same time but they need to run on different boards or only one can be timed (have a rate). You can also have multiple timed AI tasks configured for a single board but only one can actually be running at a time.
The reason you can only have a single timed task running at a time is because the M-Series boards (and many other boards as well) have a single timing engine for each type of acquisition or generation. There is a single timing engine for AI, one for AO, and so forth. You cannot have channel 1 running at 1 MS/s and another running at 50 kS/s.
However, tasks can exist even when they are not being actively run. You can create all the tasks you need at the beginning of your program and simply start and stop them as you need. After the task is stopped you do not need to clear the task until the end of your program. You can further increase performance by moving the Task into the latest state possible without actually starting the task. This can be done by calling myTask.Control(TaskAction.Action). The Task states are further explained in the NI-DAQmx Help Manual.
The concept of a task will need to be used with any device that is being programmed using NI-DAQmx. The 6259 and 6509 will need to be programmed using DAQmx. With the 2575 and 2569 you have the choice of either using the NI-DAQmx API or the NI-SWITCH API. The SWITCH API does not use the concept of tasks. For the 4072 you will need to use the NI-DMM API. This API also does not use the concept of tasks.
Hopefully this information is helpful. Let me know if you have any additional questions or concerns.
Regards,
Neil S.
Applications Engineer
National Instruments

How many fonts can I have without issues on my Macbook Pro?

How many fonts can I have without issues on my old Macbook Pro? I am running 10.6.8.
Thanks,
dugmoore

dugmoore --
Are you having problems? If so, tell us what they are.
If you just want tons of fonts, you should have a good font manager, other than the Font Book that comes with your Mac. And you should avoid "free" fonts. They cause monumental problems.

How many buttons can you have in Encore?

I'm trying to make a disc containing about 33 separate clips, all listed in the Menu, and individualy selectable. But I find when I drag buttons to the menu,it will only accept 18, then no more buttons can be added. Is this normal for Encore? Is there an upper limit to how many buttons you can have?

Tim,
I like to keep my Scene Selection Menus rather clean, and lean, so normally limit the number of Buttons for a "cleaner" look, so with, say 16 Chapters/Scenes, I will likely do 4x Scene Selection Menus, with 4 Buttons each, or maybe 3 Menus with 6 Buttons in two, and 4 Buttons in the last one.
In the Project Panel, you can Duplicate your first Scene Selection Menu, to provide the number of Scene Selection Menus, that you need. I recommend that one Rename each duplicate Scene Selection Menu, so that it is easy to identify each one.
Then, from the Main Menu, add a Button that goes to the first Scene Selection Menu. Do all the linking, for say the 4 Scene Selection Buttons on that, and then add a "Next Menu" Button, that links to Scene Selection Menu # 2. That one will have the 4 Scene Selection Buttons, and the "Next Menu," going to Scene Selection Menu # 3, plus a "Previous Menu" Button, going back to Scene Selection Menu # 1. [Obviously, you can name those Buttons to suit, say "Next," and "Previous," or perhaps just "arrows" pointing to the right for "Next," and to the left for "Back."
If, for instance, one has an odd number of Scene Selection Buttons, on the last Scene Selection Menu, just "Edit in Photoshop," and Delete the "extra" Button Layer Sets.
I also like to add my own Button names in Photoshop, rather than let Encore automatically provide the names per the names of my Timelines. For instance, I name each Timeline in numerical order, so the names will read something like this: "01_Liz_Birthday," "02_Liz_Dance," etc.. On my Scene Selection Menu, I will nave the first Button "Liz's Birthday," the second Button "Liz Dance Recital," etc., without the numerals, that just help me know which Button I will be linking to, in numerical order. I also use Photoshop to edit the Button Layer Sets name, so that Button # 1 is named "01 Liz Birthday." That gives me the numerals in the Buttons' names in my Flowchart - with intricate navigation, that takes all of the guess work out of things - all names match up, and for the Timelines, I do not have any spaces, but do in the Text for each Button. A bit more work, but when it comes time to make my links, I can do it almost instantly, with no questions in my mind. I find that a little bit of preparation at the beginning, simplifies life down the line.
Good luck, and hope that helps.
Hunt

How many emails can I have on my account? Can I have client folders to customize for each client?

How many emails can I have on my account?
Can I have client folders for each client to access their own survey/forms?
Can I customize for each client?
Do we need multiple subcription accounts for this?

You need to have one FormsCentral subscription per email.
At this time FormsCentral doesn't support folders.
Gen

How many devices can you have on 1 icloud account

how many devices can you have on 1 icloud accout?

It's unusual for a whole family to use the same icloud account, since that way everyone gets the same emails, contacts, calenders, etc. All it takes is one family member to delete a contact by mistake and then it will be deleted from everyone's devices. Not good. The usual advice is for every individual to have their own icloud account.
The iTunes store is another issue - everyone can use the same Apple ID to access the same itunes account to download music, apps, etc. without everyone having to buy the items multiple times.

How many symbolic accounts, I have to create and then assign them to res...

Hi friends,
I am in the BBP creation phase, I have created the list of wage types for my client, there are 41 wage types, now as far as posting to accounts is concerned, how many symbolic accounts, I have to create and then assign them to respective G/L accounts ?
Please throw some practical light on this, I know all theory 
Thanks
Jay

Hi Jay
We wouldnt be able to tell you exactly how many symbolic accounts you may need to create for the 41 Wage Types as it is specific to your requirement.
Check these links out: Symbolic Accounts..
http://sappeers.wordpress.com/category/sap-fi-hr-integration/
It might help you with a fair understanding of what you need to do.
Example for linking wage types to symbolic accounts: basic pay wage type u20181000u2019 is linked to symbolic account u20188888u2019 (Salaries & wages)
Hope this helped!

TOC entries: is there a limit to how many links you can have to the same htm in TOC?

TOC entries: is there a limit to how many links you can have to the same htm in TOC? I have an HTM that requires multiple links in the TOC. Now I can't compile a CHM. I have eliminated all other possible problems...

Hmm, that would be a new one on me, but I see new things all the time and try to always keep an open mind.
Okay, so one way past this might be to do the following.
Create a snippet. Copy the content of the desired page and paste into the snippet.
Create 30 different versions of the same topic by simply placing the Snippet into each topic. Then insert the different topics into the TOC.
You should still be able to modify the content of the topic in the single place (the snippet) and by having discrete points from the TOC, there should be no issue and synchronization should work beautifully.
Cheers... Rick

How many Apps can i have on my iPod Touch, is there a limit?

Is there a limit on how many Apps i can have on my iPod Touch?
Thanks in advance.

Thanks a lot, that was very helpful.
I am pretty sure that there's 16 Apps per page,
so...16 X 9 = 144 - 13 pre installed Apps.
131 total available (slots) for Apps.

How do I tell how many access points I have online? WISM module in 6509

Similar Messages

Maybe you are looking for