How Do I Tile Windows On Screen

Hello.
How do I tile 2 (or more) application windows side by side on-screen? I can manually do it by dragging application size to the correct size but is there an automatic way?

there is no built in command for this. try this program
http://www.machsoftwaredesign.com/tiles.html
there is also exposé which does this in exposé mode.

Similar Messages

How to make browser window full screen after user logs on to EP

Hi all,
I've found some amazing iformation on this forum, I hope I'll get an answer to this one too.
I would like to use the maximum avaialble desktop space to provide info to my client on logging on to the portal so that he need not scroll for any thing.
What I would like to know is if there is any global setting possible within the portal so that once the user is authenticated and is being shown his worksets, he should see the browser window in full screen mode. In IE this is done thru the pressing of F11 key.
Regards,
Neeraj Sripuram

You could set the following properties in the Framework page that is being used.
1) Launch in New Window - Display in Separate window
2) Window Features - fullscreen=yes
Upon login this would open the portal page in a new window and set the window in fullscreen mode, (Well Theoretically).
Try this out. Hope this helps.
Pradeep.

How to autoresize extension window to screen size.

Hi All,
Can I automatically resize extension panel to take the full screen width and height?
If Yes then can you please suggest me how to do that.
Thanks

Hi All,
I resolved it Using
this.stage.fullScreenSourceRect=Screen.mainScreen.bounds;
Thanks

How do I tile the Dreamweaver panels and document windows to tile instead of being superimposed?

How do I tile the Dreamweaver panels and document windows to tile instead of being superimposed?

I'm not sure what may be causing your issue on the right side of the screen, other than possibly your application frame is wider than your screen size so you aren't able to drag the window tab far enough to get the highlighting effect. Make sure your application frame is maximized to your screen by hitting the middle button in the top right of the window so it changes to the double square icon. That way, you'll know whether the edge is off screen or not.
Only certain windows can be brought to the top or bottom since those are reserved for toolbars and the Properties Inspector respectively.

How to Set Image to Lock Screen and Background in Windows Store API?

How to set an image to windows lock screen and desktop background for windows store app in c#?
if changing lock screen is available in windows store C# how about changing the desktop background using Windows store C#?

Hi icce cage,
To change the Windows lock screen we can use this API:
LockScreen class with set image methods.
To change the desktop background, it is not possible as I know.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to open a window in full screen mode using lf_fpm_navigation?

Hi Guys
For the following applications
ESS Application: HAP_START_PAGE_POWL_UI_ESS
MSS Application: HAP_START_PAGE_POWL_UI_MSS
When the user clicks on the appraisal document name, a seperate window(not full screen) is generated to display the Appraisal docuemnt.
The code is as follows:
COMP: HAP_START_PAGE_POWL_UI
Object : COMPONENTCONTROLLER
Method: FOLLOWUP_POWL
Generate the URL to be called.
    CALL METHOD cl_wd_utilities=>construct_wd_url
      EXPORTING
        application_name = 'HAP_MAIN_DOCUMENT'
        in_parameters    = lt_parameters
      IMPORTING
        out_local_url    = l_url.
    wd_this->url = l_url.
    wd_this->display_document( ).
In Method: DISPLAY_DOCUMENT
lv_alias = 'EMPLOYEE_DOCUMENT_UI_OBN'.
use FPM navigation
    ls_nav_key-key1 = 'HAP'.
    ls_nav_key-key2 = 'HAP_GENERIC_UI'.
    lr_fpm_navigation ?= lr_fpm->get_navigation( is_key = ls_nav_key iv_instance_sharing = abap_false ).
    CALL METHOD lr_fpm_navigation->get_key_from_alias
      EXPORTING
        iv_alias = lv_alias
      RECEIVING
        rv_key   = lv_key.
    lr_fpm_navigation->modify_parameters(
         EXPORTING
           id_target_key            = lv_key
           it_application_parameter = lt_appl_param
           it_business_parameter    = lt_business_param    ).
    lr_fpm_navigation->navigate( lv_key ).
Any idea how to open this window in full screen?
Highly appreciate your help.
Thank and Regards
Pramod

Hi Pramod,
This FPM navigation is achieved using settings made in Launchapd Customizing ( LPD_CUST ).
a) Execute Tran LPD_CUST
b) Go to Role HAP - Double Click to open it.
c) Open the second folder on the LHS menu - there you will find 2 entries
d) Click on second entry - in the entry setting you can see that it is configured for WD Application - HAP_MAIN_DOCUMENT
e) Click on button Show Advanced Parameters
f) There you will find a input box named as Window Features - here you can specify window features like
height=700,width=1100,position=center,menu=no,status=no,location=no,menubar=no,status=no,toolbar=no
save the settings come out and test ur app again.
change the height and width and other features as per ur req.
Regards
Manas Dua

POP UP Window on screen - How

How to invoke a Pop up window on screens.

hi,
try this.
data : WF_RES type c.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
            EXPORTING
             DEFAULTOPTION        = 'N'
          TEXTLINE1            = 'Do you want to delete the record?'
*           TEXTLINE2            = ' '
              TITEL                = 'Delete Zone'
*           START_COLUMN         = 25
*           START_ROW            = 6
*           CANCEL_DISPLAY       = 'X'
           IMPORTING
             ANSWER               = WF_RES.
if wf_res = 'J'.
user selected 'YES'.
else.
user selected 'NO'.
endif.
Rgds
anver

How do you disable the split screen / multi-window feature.

I have had my phone for 2 days, and I can not figure out how to turn off the split screen/multi-window feature. It pops up automatically at the worst times and it is getting very frustrating. I have read many things on how to use it, but have yet to find any thing that explains of to disable it.

Well, it doesn't seem that there is a way. But I solved my
problem because my minimal player was Flash 7,0,29,0 and reset the
minimal player to 7,0,0,0.

How can I remove the recent pages which appear in the windows 7 screen preview

by the windows 7 screen preview I mean the little preview screen who popup when I right-click the Firefox buttom in the Windows task bar.
I do not ask about the browser History from the browser menu.
Thank you,
Pascal

You can disable the Taskbar preview by setting the pref browser.taskbar.previews.enable to false on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
See also http://kb.mozillazine.org/about%3Aconfig

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How to open images in Fill Screen mode from Camera Raw

I am using Photoshop CS4 for Windows. I created an action that executes Fit on Screen and set the Scripts Event Manager to execute that action on the Open Document event. This works when opening a document from Photoshop.
Here are my questions:
1) After opening a raw image from Bridge in Camera Raw, when I then open the image in Photoshop, it does not run the Open Document event action to Fit on Screen. What event do I need to set the action to execute on when opening an image from Camera Raw in Photoshop?
2) I added Fit on Screen to the action by selecting Insert Menu Item from the Actions menu and then selecting View-Fit on Screen. I cannot find Fill Screen on any pull-down menu (the button found on the Hand tool bar). How can I insert the Fill Screen item (which fills the screen a little more than Fit on Screen?
3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
http://www.adobe.com/devnet/photoshop/scripting
Thanks to anyone who can help me out.

> 3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
>
>
>
See "Appendix A: Event ID Codes" in the PSCS4 JavaScript Reference pdf file that
comes with PSCS4.
-X

How can I make my email screen smaller?

How can I make my email screen smaller?

Just what do you mean?
Can'ty you just resize the window with the mouse cursor like other windows?

How to show Popup window in OAF on click of a button

How to show Popup window in OAF on click of a button (Without using Javascript)
1. I have one OAF page on which i should have button Called "Next"
2. On clicking of this button a new window/page should be displayed with the image stored in database. on clicking on this "Next" button again next image from the database should be displayed on the newly opened window/page.
3. Is it possible to configure OAF to render window_II in the opposite screen of window_I where the OAF client resides? (If the OAF-client resides in screen_I render window with image in screen_II). That is, at the first click on the Next-button, window_II appers on screen_II and not some random location. The user will have 2 screen/monitors on his work place.
4. Given that the two windows reside on each screen, is it possible to make OAF remember the position of window_II ? The goal of this is to force the window to pop up on the same location on the same screen next time the Next-button is pressed.
5. If window_II is closed (eg. by using X) and the Next-button in window_I is pressed again, will window_II pop up in the same location and screen as previously ?
6. Is it possible to have a Print-button in window_I what prints the scanned picture in window_II ? Is it possible to have the click on this Print-button to open the standard print dialog on top of window_II ? Could the button be placed in window_II as well, having the same functionality ?

I have tried to open home page window. You can change the URL according to your requirement.
import oracle.apps.fnd.framework.webui.OAUrl;
StringBuffer l_buffer = new StringBuffer();
l_buffer.append("javascript:mywin = openWindow(top, '");
String url = "/OA_HTML/OA.jsp?OAFunc=OAHOMEPAGE"; // Calling Oracle Home Page
OAUrl popupUrl = new OAUrl(url, OAWebBeanConstants.ADD_BREAD_CRUMB_SAVE );
String strUrl = popupUrl.createURL(pageContext);
l_buffer.append(strUrl.toString());
l_buffer.append("', 'lovWindow', {width:750, height:550},false,'dialog',null);");
pageContext.putJavaScriptFunction("SomeName",l_buffer.toString());
Above code will open the new page in new window.
Thanks
--Anil

Using numbers 2.3 how do i split windows to view more than 1 spreadsheet at a time?

using numbers 2.3 how do i split windows to view more than 1 spreadsheet at a time?

Hi seth,
Numbers vocabulary:
Spreadsheets (aka: Document)
contain one or more Sheets
on each of which may be placed one or more Tables
each of which contains one or more cells
each of which may contain either data or a formula.
Spreadsheets open in separate windows. Depending on the contents of each spreadsheet, and the scale at which you want to see it (and the size of your display), you can view more than one spreadsheet in the same manner as you can view more than one of any kind of document—open two documents in separate windows. Resize the windows to allow both to be viewed at the same time. Place and scale the individual documents to permit viewing the desired part of each
Sheets within the same document cannot be displayed simultaneously. You can make and open a copy of the document, then open and view both copies as described above, but this introduces new opportunities to edit the wrong copy. You could Copy a Table from one part of the document, open Preview and go File > New from Clipboard to create a PDF copy of that table (readable, but not editable), and view the spreadsheet and pdf documents as described above.
Tables can be rearranged, or have rows or columns (or both) hidden to permit simultaneous viewing of selected parts of both.
A Table can have Table > Freeze Header Rows and Table > Freeze Header Columns set to keep these rows/columns visible as the rest of the table is scrolled. Or can have a range of rows (or columns) hidden to allow viewing of rows (columns) adjacent to that range visible on the same screen.
Numbers does not support freezing of rows or columns other than Header rows and Header Columns.
Regards,
Barry

Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!

I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!

Hi btgclark,
I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
Please let me know how this works out for you, thank you.
I worked on behalf of HP

How Do I Tile Windows On Screen

Similar Messages

Maybe you are looking for