How do I use both a GUI switch and a timer to control an output?

Hi, I have no trouble setting up either a gui switch or a timer to switch a hardware output. However, now I am trying to use both to control the same output. That is, the latest change of either the timer or gui switch changes the output. I can do this by setting the gui switch output and the timer output into a software latch and connecting the latch to the hardware. The problem is that now the gui switch does not reflect the state of the hardware output (if the timer changed the state). One solution I can see is that there is both a push button 'change state' as well as an indicator at the gui but I would rather have all the functionality in the 1 switch. Any suggestions welcome!

It looks like you should be using a flip-flop object. This object changes state each time your input transitions from false to true. Also you would probably be better off using a push button rather tham a switch.
You can tie "your timer OR your pushbutton" to the input of your flip-flop. Then if you display the flip-flop on top of the push button you can easily see which state you are in. Then of course just tie your flip-flop to your output.
**This will work fine as long as you are NOT running multiple client applications. If you are running multiple clients, then it has to be done completely different. If this is the case please let me know and I will explain.
Hope this helps

Similar Messages

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

How can I use an Access front end and Access button to control a LabView Shared variable boolean?

My company has invested a lot of money on the office network to write many many access databases and front ends. I'm looking for a way to tie a button on an access front end to toggle a LabView boolean shared variable to notify me when they changed something on their side of the network. I'm not seeing anything that helps on a web or forum search. They don't like the idea of a separate labview control that they have to push a button on to let me know.
Thanks
Solved!
Go to Solution.

Hi Patrick,
While this is not the intended purpose of Network-Published Shared Variables, you might be able to accomplish this by writing separate accessor VIs for reading from and writing to the variable, making sure to wire the inputs and outputs. Then, you could build a DLL, making sure that you include the accessor VIs as Exported VIs and include the DLL Library in the Always Included section of the DLL Build Specifications. During this process, you will define the function prototype, which will provide the function call, required parameters, and return values. Once the DLL is created, you can then call it and its functions from another programming language (C, C++, C#, VB, etc.). This may or may not work, but it is the only way that I can think of at this point. I have included some references that may help you in this process.
Building a Shared Library in LabVIEW (White Paper)
Calling LabVIEW VIs from Other Programming Languages (White Paper)
Calling LabVIEW DLL From C# (Forum with Examples)
I hope this helps.
Regards,
Mike Watts
Product Marketing - Modular Instruments

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me!

I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me! I have a macbook pro and iphone 5

lewbobber wrote:
Basically i need to either take it to a shop that can unlock i.e. £40.00
Be aware, you go that route & every time you try to update or restore, it will error out, leaving your phone unusable. Not to mention, you void all warranty/support.
Sell it & use the proceeds towards an officially unlocked iPhone bought directly from Apple.
Good luck.

TS1398 How can I use both, Windows PC and iMac, when using WiFi?. It is either-or. What can I do?

How can I use both, Windows PC and iMac, when using WiFi?. It is either-or. What can I do?

What does this have to do with using an iPad?
But yes, you should be able to connect to your home WiFi network with multiple computers and devices. In my house my wife, my daughter and I will all be using the WiFi Internet connection at the same time with our Laptops and I will also be using my iPad, my daughter uses her iPhone, and we have no issues at all.
Is this what you want to know about?

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

I have paired 2 seperate HMDX Jam wireless speakers. how can I use both speakers and listen to my ipod at same time?

I have paired 2 seperate HMDX Jam wireless speakers. how can I use both and ipod at the same time?

No, the iPod does not support that.

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

How to display polygons both with line contour and filled interior?

How to display polygons both with line contour and filled interior?
Java3D 1.3, Java 1.4.1-rc

Hi,
I just started with Java3D last week.
I assume you mean drawing polygons with outlines (wireframe) in one color and polygon face filling with another color. If so, I've got the same question! (I usually think of "contour" to refers to plotting surface intensity of independent data like temperature or elevation, but I don't think you mean this.)
The only solution I've found so far is to make two shapes with the same geometry.
Here's an example - an outlined and filled cube. I made it using a generalize class DualShape which is two shapes with the same geometry, but one filled and one as a line.
It works, although I can't say I understand the setPolygonOffset(), knowing what value to set. Without the command, the depthbuffer can't consistently decide which should be in front between the fills and lines so it looks bad.
I certainly think it would be nicer to do both internally, like:
pa.setPolygonMode(pa.POLYGON_LINE || pa.POLYGON_FILL);
And then have setFillColor and setLineColor for each.
I don't know why they don't allow this - maybe OpenGL can't do it like this so Java3D follows.
If anyone has any better ideas I'd like to hear about it.
Tom Ruen
class DualCube extends DualShape // cube with outline and fill colors
public DualCube(float ax, float ay, float az, //cube lower corner
float bx, float by, float bz, //cube upper corner
float br, float bg, float bb, //border color
float fr, float fg, float fb) //fill color
setGeometry(new CubeGeometry(ax,ay,az,bx,by,bz),br,bg,bb,fr,fg,fb);
class DualShape extends BranchGroup //general shape with outline and fill colors
Appearance ap1,ap2;
PolygonAttributes pa1,pa2;
ColoringAttributes ca1,ca2;
Shape3D s1,s2;
public void setGeometry(Geometry geo, float br, float bg, float bb, float fr, float fg, float fb)
//filled shape:
addChild(s1=new Shape3D(geo, ap1=new Appearance()));
ap1.setPolygonAttributes(pa1=new PolygonAttributes()); pa1.setPolygonMode(pa1.POLYGON_FILL);
ap1.setColoringAttributes(ca1=new ColoringAttributes()); ca1.setColor(fr,fg,fb);
//lined (wire) shape:
addChild(s2=new Shape3D(geo, ap2=new Appearance()));
ap2.setPolygonAttributes(pa2=new PolygonAttributes()); pa2.setPolygonMode(pa2.POLYGON_LINE);
ap2.setColoringAttributes(ca2=new ColoringAttributes()); ca2.setColor(br,bg,bb);
pa2.setPolygonOffset(-1000); //Uncertain what "float" value to use!
class CubeGeometry extends IndexedQuadArray //cube geometry data
private static final int[] faces =
0,3,2,1,
0,1,5,4,
1,2,6,5,
2,3,7,6,
3,0,4,7,
4,5,6,7
private static float[] verts = new float[24];
public CubeGeometry(float ax, float ay, float az, //lower limit
float bx, float by, float bz) //upper limit
super(8, IndexedQuadArray.COORDINATES , 24);
int n;
n=0; verts[n]=ax; verts[n+1]=ay; verts[n+2]=az;
n=3; verts[n]=bx; verts[n+1]=ay; verts[n+2]=az;
n=6; verts[n]=bx; verts[n+1]=by; verts[n+2]=az;
n=9; verts[n]=ax; verts[n+1]=by; verts[n+2]=az;
n=12; verts[n]=ax; verts[n+1]=ay; verts[n+2]=bz;
n=15; verts[n]=bx; verts[n+1]=ay; verts[n+2]=bz;
n=18; verts[n]=bx; verts[n+1]=by; verts[n+2]=bz;
n=21; verts[n]=ax; verts[n+1]=by; verts[n+2]=bz;
setCoordinates(0, verts);
setCoordinateIndices(0, faces);

HT204053 How do I use the same Apple ID and different Cloud for other devises

Hi
How do I use the sane Apple ID and different Icloud for other devises

http://support.apple.com/kb/HT4627

How can I use microsoft word, power point and those apps in my new iMac ? i bought this iMac yesterday so am new on tho and i would like to know

how can I use microsoft word, power point and those apps in my new iMac ? i bought this iMac yesterday so am new on tho and i would like to know

If you absolutely must have the Microsoft applications, you can purchase and download them from http://microsoft.com/mac.
Free software suites LibreOffice and OpenOffice offer similar functionality (word processing and spreadsheets).
Or you could do worse than look at Apple's Pages, Numbers and Keynote, which should already be installed in your Mac and can export to Microsoft formats if need be.
Matt

Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems,

Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions. When I click to accept the terms and conditions, nothing happens and the editor fails to open. Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open. Any advice?

Premiere Elements 10 is now 64 bit, but not PSE10.
Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
Click image to enlarge
Turn off face recognition and the auto-analyzer to improve performance.
When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

How do I use the commands to start and restart the jmqbroker normally?

How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?

'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that.

How can i use offline & online database in the same time?

how can i use offline & online database in the same time?
my database in another server when the connection true it connect
but if not does not work
i wanna make offline database if the server not connected it connect offline then the server is on it alter all data from the offline to the server.

User, please tell us your Jdev version!
There is no such functionality build into the framework. The offline data base is only for designing the db, not to have a backup db.
If you can't connect to the db the application will not work.
Timo

How do I use both a GUI switch and a timer to control an output?

Similar Messages

Maybe you are looking for