How do I use the commands to start and restart the jmqbroker normally?

How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?

'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that.

Similar Messages

When using the "Books" app on my ipod touch, if I open one of my books there is no way to return to the library without stopping and restarting the app. What am I doing wrong?

Once I open a book in my library there is no option to close it and return to the library. I must leave the app, stop the app and then restart it. How do I exit an opened book to return to my library without having to exit, stop, and restart the app?

Assuming you are talking about "iBooks", then just
tap the center of the screen
and you should see a "Library" in the upper left corner of the screen.
tap the center of the screen again,
and you should return to full screen mode.
if this is NOT iBooks, then I do not know what controls that app

HT1391 what is the command to copy and also the command to paste?

What is the command to copy and paste something?

In Mac OS X, press the Command and C or V keys.
(87331)

What is the procedure to stop and restart the Hyerion Environment

Hi All,
Can you kindly let me know whether the procedure that i am following below is correct to stop and restart the Hyperion Environment.
To Stop:
1) Essbase.
2) Shared Services.
3) BI+ (Financial Reporting)
4) Planning.
5) DB2
To Start:
1) DB2
2) Shared Services.
3) BI+ (Financial Reporting)
4) Hyperion Planning.
5) Essbase.
Is the above procedure correct or do i need to do any changes to it.
Regards,
Krishna.

Hi,
I guess restarting database is not required during the process of restarting Hyperion Environment. Below order is preferable.
Stop:
1) Essbase Administration Services
2) Planning
3) BI Plus Web Apps (Workspace, Web Analysis,..)
4) BI Plus (core)
5) Foundation Services (License services, shared services)
Start:
1) Foundation Services (License services, shared services)
2) BI Plus (core)
3) BI Plus Web Apps (Workspace, Web Analysis,..)
4) Essbase Administration Services
5) Planning
Regards,
Sreemani

My husband and I both have iPhones . How do I use one account for purchases and keep the email separate when using iCloud?

My husband and I both have iPhones . How do I use one iTunes account to share music, photos and apps, and keep our email accounts separate since all data will use the iCloud function.

You shouldn't be using the same account on phone iphones. Have him setup his own and make sure his iCloud is logged in with that one

Execute the command "arp -a" and save the list of ip & MAC adresses

Hey all ,
I was looking for a code where i can execute the command "arp -a" in CMD to get a list of all MAC and ip adresses
connected on the network and save them for further use is this possible or not .. please if possible if any 1 can supply me with the code i would be grateful ... thnks for ur time
Best Regards,
MIG()ZZZZ

the list of ip and mac of connected computers to the networkThere really isn't a way of doing this because in TCP/IP 'connected' doesn't have a well-defined meaning, so there is no such thing as 'the list' either. If it's a Windows LAN you might find something in Samba that will do it, I don't know.
What's it all for? There are also IP broadcast and multicast facilities, could be what you're really looking for.

I have downloaded a movie to iPad but when watching it only allows the first 30 seconds and restarts the movie?

I have downloaded a film from iTunes to iPad but when playing it stops after 30 seconds and restarts. It has fully downloaded.

Are you watching it through the Video app?

HT3309 One User on my iMac seems to be disabled. When I log onto that User the desktop appears empty and only half of the programs appear on the operating bar. I cannot open any program and nothing works. I have to use Command/Option/Esc to restart the

I cannot access one user on my iMac. When I log onto that user the dekstop appears unpopulated and blank and half of the programs do not appear on the operating bar. When I attempt to click on a program such as Safari nothing happens. Nothing works and I can only exit by doing a command/option/esc and restarting the computer. The other user and the Administrator work fine. What has disabled the one user? How do I recover this user and its files?

No.. I have been through parental control and it does not affect this problem. Now if I log onto this user I cannot get out even with a comman/option/escape; I have to unplug the power to the computer to get it to restart with the administrator. I saw somewhere that there is a process in which I can delete the use and then create a new user with the same name and password and then recover everything - but I cannot find that solution. This is a real problem for me, as you might imagine.

Using the spacebar for starting and stopping a clip does not work

Hi!
The spacebar for starting and stopping the playing of a clip in the viewer of a sequence in the timeline has a live of its own. Without changing any setings, it sometimes works, but mostly not. Is there a seeting, I have not figured out yet? While in a session with Final Cut Express, it does not change its behavior. It starts with a working or not working spacebar. The same applies to the arrows to go back and for a frame, or back and for a clip. If the spacebar does not work, the arrows do not work either.

thanks everybody. But my spacebar and arrow keys still do not work.
As uggested, I deleted the preferences in the library (which is also what is suggested by fcpbook.com/Misc1.html)
I am used working with Final Cut for some time now. And just got myself a new iMac and the program. So everything is quite new. I did not change any settings so far.
The first 2 days everything was fine.
Then, one day, the spacebar and the arrow key stopped working. Not in the middle of a session, but when I started the FCE new. Inbetween, it worked for some time. Now, the spacebar is gone again.
It's just the function of playing the clip that does not work. In whatever window (timeline, viewer). The function of the spacebar to make a space (for example in te name of clip or in a text file) works fine.
I would not mind the spacebar that much, but I miss the arrow keys to go from frame to frame, or from clip. It's strange.

No connection after starting or restarting the system

Hi,
I have a problem.
There is no internet connection after start or restart.
Until last week there had been no problems. There was an automatic connection with my SPEEDTOUCH9FF4D8.
But suddenly it does not connect automaticly. I can select SPEEDTOUCH manualy and than it works...
Thank you for your answers.
Mac Book Mac OS X (10.4.10)

Hi im slightly confused by your post whether its the computer not connecting to the network automatically or whether there is no internet connection to the router at all but heres a few things to try anyway!
First of all, if the internet goes down and restarting the router doesn't solve, then unplug your cable modem for at least 5 mins, the cable modem needs to forget the MAC address of the previously plugged in device. Then start it up and when the ready lights are on the router (or about a minute after starting the router) then plug in the router and the connection should work!
Secondly, if your computer doesn't automatically connect to the network anymore (presumably your on mac osx) then go to System Preferences / Network then select configure AirPort. Make sure 'By Default, join' is Automatic, then go to options at the bottom and select 'Automatically Join and Open Network'
Hope this helps!

My iMac has two admin accounts (because I used Migration Assistant). How do I get the iMac to start up in the 2nd account?

My iMac has two admin accounts (because I used Migration Assistant). How do I get the iMac to start up in the 2nd account?

Welcome to Apple Support Communities
Open System Preferences > Users & Groups > Login Options, press the padlock at the bottom left corner of the System Preferences window and choose the second user account next to "Automatic login". Your computer will always log in to this user account whenever you start up Mac OS X.
If you haven't got anything in the first user account, you can remove it from System Preferences > Users & Groups after logging into the second user account

How to run commands like "ipconfig" and get the output in adobe AIR in windows?

import flash.desktop.NativeProcess;
import flash.desktop.NativeProcessStartupInfo;
if (NativeProcess.isSupported) {
     var npsi:NativeProcessStartupInfo = new NativeProcessStartupInfo();
     var processpath:File = File.applicationDirectory.resolvePath("MyApplication.whatever");
     var process:NativeProcess = new NativeProcess();
     npsi.executable = processpath;
     process.start(npsi);
The above can only run a sub-application, but how to run an independent application(command) like ipconfig and get the result?

Hi,
here is an example of running a net Use command line from AIR, unig the new NativeProcess. Hope it will help !
function launchProcess()
var file = air.File.applicationDirectory;
// set command path
file = file.resolvePath("C:/Windows/system32/net.exe");
var nativeProcessStartupInfo = new air.NativeProcessStartupInfo();
nativeProcessStartupInfo.executable = file;
// prepare command parameters
var args = new runtime.Vector["<String>"]();
args.push('USE');
args.push('W:');
args.push('/delete');
args.push('/y');
// set arguments
nativeProcessStartupInfo.arguments = args;
// add listeners to catch command outputs
process.addEventListener(air.ProgressEvent.STANDARD_OUTPUT_DATA, onOutputData);
process.addEventListener(air.ProgressEvent.STANDARD_ERROR_DATA, onErrorData);
process.addEventListener(air.NativeProcessExitEvent.EXIT, onExit);
// create and run Native process
process = new air.NativeProcess();
process.start(nativeProcessStartupInfo);
function onOutputData(ProgressEvent)
var processResults = process.standardOutput.readUTFBytes(process.standardOutput.bytesAvailable);
air.trace("Results: \n" + processResults);
function onErrorData(ProgressEvent)
var processResults = process.standardError.readUTFBytes(process.standardError.bytesAvailable);
if(processResults.search('password') > -1){
    window.alert('Bad password');
air.trace("Errors: \n" + processResults);
function onExit(NativeProcessExitEvent)
air.trace("Process ended with code: " + NativeProcessExitEvent.exitCode);

I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

Hi Ablondel24,
I understand that you are getting a 404 message when you access a website from a Mac, not a PC.
First check the cache for the site:
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Second try to [[Delete cookies to remove the information websites have stored on your computer]]
Let us know if this solves the issues you are having.

I have a touchsmart tm2 that shot down after I started using it from stand by and now the notebook w

I have a touchsmart tm2 that shot down after I started using it from stand by and now the notebook wont start

Hi
You have a couple of options as I see it please try these steps might help you to fix your issue.
Resolving Problems with Sleep and Hibernate Mode
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Used iMac won't start up past the flashing folder or spinning loading wheel

Hey guys, I just bought a used iMac 24" with mountain lion of eBay. (first mistake) its the late 2008 model.
got it home started fine. started moving files across and it froze, couldn't force quite or anything so I turned it off at the back.
Tried turning it back on and I got the folder with a question mark flashing at me..
tried safe booting and I just get white screen with a movable mouse pointer..
tried force restarting using option>Command>R>P. and get either the folder flashing ? or the apple symbol with the spinning loading symbol under it not going away.
I've left it over night and it often turns on for about 5 mins in the morning and then freezes.. and the cycle repeats..
I do not have the install disks as it was used.. and I'm really stuck.
Anyone got any good ideas?
Thanks

If you boot holding the alt/option key, that should give you a choice of source to boot from. Assuming that works, go into System Preferences and set your boot source so it will proceed normally after that.
If that doesn't work, either buy Snow Leopard (in US call the Apple online store at 800-MY-APPLE to order) or take it to your local Apple Store to have them boot to a Snow Leopard disk and run a disk repair and permission repair on your hard drive.

How do I use the commands to start and restart the jmqbroker normally?

Similar Messages

Maybe you are looking for