How do I use the same track multiple times in different playlists? I want to rename it multiple times.

Hi, I am an entertainer that want rename a track a music a number of different ways so it will come up in playlist that work alphabeticly.
for instance:
Good Song I want to change to:
A Good Song
B Good Song
C Good Song
D Good Song
So I can place them in different playlist and keep the order straight.
Todd

You can't give a single track multiple sets of properties, but if you want four copies of a song with different metadata then find the original and copy/paste it three times into the Automatically Add to iTunes folder, then edit the properties of each in turn.
tt2

Similar Messages

How can I use the same "I Tunes" on two different computers

I’m using two different kinds of Personal Computer: One is Desktop PC And the other one is Notebook .
In each computer there are the same songs and when I get the new ones to the Desktop I want them to be placed on the Notebook or reverse.
Where does the I Tunes save the playlist on the hard drive ?
I have prepared a playlist on my Notebook and want it to be seen on the Desktop but I dont want to fallow the steps File > Library > Export Playlist on the Notebook. Is there any other way to make this issue instead of the mentioned steps.
How can I see the same Playlists and songs on two different computers ( notebook and desktop) including the updating processes.
Operating systems of the computers:
Desktop: XP Pro
Notebook: Vista Bussiness

I use SyncToy 2.0 to keep two instances of my library in sync. SyncToy's preview will show which files it is about to update giving you a chance to spot unexpected changes and during the run only the changed files will be copied saving lots of time.
As long as I sync after making updates at one instance of the library before making any updates at the other then everything works just fine. I periodically run iTunes Folder Watch to check for any orphaned entries or new items that haven't been imported into the active library. If your machines are regularly networked together this process is fairly straightfoward. Mine are in disparate locations so I use one of the (physically) small WD My Passport host powered drives which I take between home & work, synchronising at either end. This gives me three complete copies of my library so I'm covering backup & synchronisation in the same operation.
When connecting my iPod at either location iTunes recognises itself as the "home" library for the iPod so I'm able to use the sync with selected playlists option without getting warning messages about the iPod being synced with a different library.
tt2

How can I use the same thread pool implementation for different tasks?

Dear java programmers,
I have written a class which submits Callable tasks to a thread pool while illustrating the progress of the overall procedure in a JFrame with a progress bar and text area. I want to use this class for several applications in which the process and consequently the Callable object varies. I simplified my code and looks like this:
        threadPoolSize = 4;
        String[] chainArray = predock.PrepareDockEnvironment();
        int chainArrayLength = chainArray.length;
        String score = "null";
        ExecutorService executor = Executors.newFixedThreadPool(threadPoolSize);
        CompletionService<String> referee = new ExecutorCompletionService<String>(executor);
        for (int i = 0; i < threadPoolSize - 1; i++) {
            System.out.println("Submiting new thread for chain " + chainArray);
referee.submit(new Parser(chainArray[i]));
for (int chainIndex = threadPoolSize; chainIndex < chainArrayLength; chainIndex++) {
try {
System.out.println("Submiting new thread for chain " + chainArray[chainIndex]);
referee.submit(new Parser(chainArray[i]));
score = referee.poll(10, TimeUnit.MINUTES).get();
System.out.println("The next score is " + score);
executor.shutdown();
int index = chainArrayLength - threadPoolSize;
score = "null";
while (!executor.isTerminated()) {
score = referee.poll(10, TimeUnit.MINUTES).get();
System.out.println("The next score is " + score);
index++;
My question is how can I replace Parser object with something changeable, so that I can set it accordingly whenever I call this method to conduct a different task?
thanks,
Tom

OK lets's start from the beginning with more details. I have that class called ProgressGUI which opens a small window with 2 buttons ("start" and "stop"), a progress bar and a text area. It also implements a thread pool to conducts the analysis of multiple files.
My main GUI, which is much bigger that the latter, is in a class named GUI. There are 3 types of operations which implement the thread pool, each one encapsulated in a different class (SMAP, Dock, EP). The user can set the necessary parameters and when clicking on a button, opens the ProgressGUI window which depicts the progress of the respective operation at each time step.
The code I posted is taken from ProgressGui.class and at the moment, in order to conduct one of the supported operations, I replace "new Parser(chainArray)" with either "new SMAP(chainArray[i])", "new Dock(chainArray[i])", "new EP(chainArray[i])". It would be redundant to have exactly the same thread pool implementation (shown in my first post) written 3 different times, when the only thing that needs to be changed is "new Parser(chainArray[i])".
What I though at first was defining an abstract method named MainOperation and replace "new Parser(chainArray[i])" with:
new Callable() {
public void call() {
    MainOperation();
});For instance when one wants to use SMAP.class, he would initialize MainOperation as:
public abstract String MainOperation(){
    return new SMAP(chainArray));
That's the most reasonable explanation I can give, but apparently an abstract method cannot be called anywhere else in the abstract class (ProgressGUI.class in my case).
Firstly it should be Callable not Runnable.Can you explain why? You are just running a method and ignoring any result or exception. However, it makes little difference.ExecutorCompletionService takes Future objects as input, that's why it should be Callable and not Runnable. The returned value is a score (String).
Secondly how can I change that runMyNewMethod() on demand, can I do it by defining it as abstract?How do you want to determine which method to run?The user will click on the appropriate button and the GUI will initialize (perhaps implicitly) the body of the abstract method MainOperation accordingly. Don't worry about that, this is not the point.
Edited by: tevang2 on Dec 28, 2008 7:18 AM

How can I use the same Apple Id on two different devices without having to re-enter my payment details

I have a Macbook Pro and an iPad2 which I sync to the Macbook. Sometimes I buy apps straight from the iPad and other times from the Macbook but each time I change from one to the other I have to re-enter my payment details. Can I set my account up to recognise that I may buy from both of these devices?

Apple "verifies" your Apple ID account information with every purchase of all free or paid apps whether iOS devics or computers.
Apple wants to make sure someone else hasn't compromised your account.

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How can I use the same sleepimage over and over?

Hi, this was asked a while ago for Tiger, but had no real answer. Now I hope things have changed in Leopard 10.5.4.
I have a STATIC system on a car that should boot over and over in exactly the same way. The idea is to make a good sleepimage (/var/vm/sleepimage) and then force the computer to read it at every startup AS IF it was waking up from sleep mode all the times.
This MUST be possible because OSX does it every time it wakes up from safesleep (sudo pmset hibernatemode 1). All I need it to find out WHERE OSX writes down that at the next wake it should use the sleepimage instead of a normal boot. Then, once I know where it write this, I simply force that flag to be active all the times.
Please also be aware of the following notes and constraints:
0. The boot should be as fast as possible
1. I can't to use the regular sleep function: the system must drain zero power while shut down
2. There are no dangers in using the same sleepimage multiple times: the disk contents do not change. The system should be absolutely identical at every boot (or "wake")
3. The system is ALWAYS shut down by pulling the plug of the MacMini. Thereshould be no possibility for the system to "update" the sleepimage
I hope some of you OSX experts will give me a hint concerning where this information is stored (and maybe how to override it)
thanks a lot
Lele
Message was edited by: Leelx

Hi, this was asked a while ago for Tiger, but had no real answer. Now I hope things have changed in Leopard 10.5.4.
I have a STATIC system on a car that should boot over and over in exactly the same way. The idea is to make a good sleepimage (/var/vm/sleepimage) and then force the computer to read it at every startup AS IF it was waking up from sleep mode all the times.
This MUST be possible because OSX does it every time it wakes up from safesleep (sudo pmset hibernatemode 1). All I need it to find out WHERE OSX writes down that at the next wake it should use the sleepimage instead of a normal boot. Then, once I know where it write this, I simply force that flag to be active all the times.
Please also be aware of the following notes and constraints:
0. The boot should be as fast as possible
1. I can't to use the regular sleep function: the system must drain zero power while shut down
2. There are no dangers in using the same sleepimage multiple times: the disk contents do not change. The system should be absolutely identical at every boot (or "wake")
3. The system is ALWAYS shut down by pulling the plug of the MacMini. Thereshould be no possibility for the system to "update" the sleepimage
I hope some of you OSX experts will give me a hint concerning where this information is stored (and maybe how to override it)
thanks a lot
Lele
Message was edited by: Leelx

How do I use the same photo twice in a slideshow created in iPhoto'11?

I created a slideshow in iPhoto'11 and would like to use the first slide also as the last slide.
How can I use the same photo twice?

Seems you have to duplicate the photo in your Library to add the same picture twice.

How do I use the same icloud address as my itunes one

how do I use the same icloud ID as my itunes one

it tells me it is already in use
You will need to contact the previous owner of the iPhone in order to change the Apple ID.

How am i able to use the same itunes account on a different ipod?

How am I able to use the same iTunes account on a different iPod?

By just using the same iTunes account. If you set up the iPod on your computer just make sure that iTunes is signed your account. Of settingup via wifi, just enter your existing account. Do not create a new one.

HT204053 My husband and I have separate apple IDs, how do we use the same iTunes account

My husband and I have separate apple IDs , how do we use the same iTunes account

You don't. Each ID is associated with a separate account. Each of you should maintain a separate user account on your computer so as to maintain separate iTunes Libraries. Do not sync your phone with your husbands account or Apple ID and vice-versa or your data will become inter-mixed or worse - deleted from the phone.
Try to understand that iDevices are intended for use by one person with one Apple ID, one iTunes Library, and one iTunes account. They are not multi-user devices.

How can i use the same cursor in a loop fro multipletimes.

I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
I am sending the code which i have written in When-Button-Pressed-Trigger...
declare
     sid number;
     pid number;
cursor csid is select distinct(site_id) from cyber_ppt;
cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
     stdt varchar2(10);
     eddt varchar2(10);
     nom number;
     stmonth varchar2(10);
     edmonth varchar2(10);
     cjan number:=0;
     cfeb number:=0;
     cmar number:=0;
     capr number:=0;
     cmay number:=0;
     cjun number:=0;
     cjul number:=0;
     caug number:=0;
     csep number:=0;
     coct number:=0;
     cnov number:=0;
     cdec number:=0;
     i number:=1;
begin
     open csid ;
     loop
     fetch csid into sid;
          exit when csid %notfound;
          message(sid);
     open cpid;
     loop
     fetch cpid into pid,stdt,eddt ;
     exit when cpid %notfound;
     message(sid||'-'||pid);
     stmonth:=substr(stdt,4,3);
     edmonth:=substr(eddt,4,3);
     nom:= months_between(eddt,stdt);
while i <= round(nom)
     loop
     stmonth:=substr(stdt,4,3);
if stmonth='JAN' then
          cjan:=cjan+1;
elsif stmonth='FEB' then
          cfeb:=cfeb+1;
elsif stmonth='MAR' then
          cmar:=cmar+1;
elsif stmonth='APR' then
          capr:=capr+1;
elsif stmonth='MAY' then
          cmay:=cmay+1;
elsif stmonth='JUN' then
          cjun:=cjun+1;
elsif stmonth ='JUL' then
          cjul:=cjul+1;
elsif stmonth ='AUG' then
          caug:=caug+1;
elsif stmonth ='SEP' then
          csep:=csep+1;
elsif stmonth ='OCT' then
          coct:=coct+1;
elsif stmonth ='NOV' then
          cnov:=cnov+1;
elsif stmonth ='DEC' then
          cdec:=cdec+1;
end if;
     stdt:=add_months(stdt,1);
     i:=i+1;
     end loop;
     end loop;
     end loop;
     end;


try this /* untested */
DECLARE
sid           NUMBER;
pid           NUMBER;
CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
stdt        VARCHAR2(10);
eddt        VARCHAR2(10);
nom         NUMBER;
stmonth     VARCHAR2(10);
edmonth     VARCHAR2(10);
cjan         NUMBER:=0;
cfeb         NUMBER:=0;
cmar         NUMBER:=0;
capr         NUMBER:=0;
cmay         NUMBER:=0;
cjun         NUMBER:=0;
cjul         NUMBER:=0;
caug         NUMBER:=0;
csep         NUMBER:=0;
coct         NUMBER:=0;
cnov         NUMBER:=0;
cdec         NUMBER:=0;
i            NUMBER:=1;
BEGIN
FOR rec IN csid
LOOP
                  sid := rec.csid;
FOR cRec IN cpid(sid)
LOOP
                 pid := cRec.pc_id;
                 stdt := cRec.st_dt;
                 eddt := cRec.ed_dt;
stmonth:= SUBSTR(stdt,4,3);
edmonth:= SUBSTR(eddt,4,3);
nom:= months_between(eddt,stdt);
WHILE i <= round(nom)
LOOP
          stmonth := SUBSTR(stdt,4,3);
IF stmonth='JAN'
THEN
         cjan:=cjan+1;
ELSIF stmonth='FEB' THEN
         cfeb:=cfeb+1;
ELSIF stmonth='MAR' THEN
          cmar:=cmar+1;
ELSIF stmonth='APR' THEN
          capr:=capr+1;
ELSIF stmonth='MAY' THEN
          cmay:=cmay+1;
ELSIF stmonth='JUN' THEN
          cjun:=cjun+1;
ELSIF stmonth ='JUL' THEN
          cjul:=cjul+1;
ELSIF stmonth ='AUG' THEN
          caug:=caug+1;
ELSIF stmonth ='SEP' THEN
          csep:=csep+1;
ELSIF stmonth ='OCT' THEN
          coct:=coct+1;
ELSIF stmonth ='NOV' THEN
          cnov:=cnov+1;
ELSIF stmonth ='DEC' THEN
          cdec:=cdec+1;
END IF;
         stdt:=add_months(stdt,1);
         i:=i+1;
END LOOP;
END LOOP;
END LOOP;
END;

I have a new ipod and when I sign in to Words with Friends it says that user name is already in use. How can I continue using the same user name with a different ipod?

I have a new ipod and added all my apps to it. When I sign in to Words with Friends it says that "user name is already in use" because it is linked to my old ipod. How can I use the same user name with my new ipod?

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

How can we use the same package in our report used by some other report

how can we use the same package in our report used by some other report

Hi,
You just need to assign package while saving your report.
No extra is required providing you are aware of package to be used.

Hi. My 2013 MacBook Air has suddenly reverted to a previous Excel spreadsheet (from May). I use the same spreadsheet several times a day and hit cmd 's' every 5-10 minutes. How can I find the version I was using yesterday?? Please help. Thanks

Hi. My 2013 MacBook Air has suddenly reverted to a previous Excel spreadsheet (from May). I use the same spreadsheet several times a day and hit cmd 's' every 5-10 minutes. How can I find the version I was using yesterday?? Please help. Thanks

Might be something for you here > Automatically save and recover files - mac excel

How do I use the same track multiple times in different playlists? I want to rename it multiple times.

Similar Messages

Maybe you are looking for