How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion?  Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7. 
I would like to read and write in both directions from drive to drive if possible.  I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares. 
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:".  However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access. 
Is the Paragon NTFS that comes with Mountain Lion limited in some way? 
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps.  I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me. 

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

Similar Messages

  • HT203167 I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

    I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

    The iTunes application should be installed on the system drive. You may need to repair iTunes to fix that error regarding a missing .exe.
    To organize your library properly see Make a split library portable.
    If you don't have a working version of the library that can be transformed into a portable shape I have tools and techniques that can repair the broken links.
    tt2

  • My external hard drive does not show up on my desktop

    My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive  and that showed up on my desktop.Any help????

    if it is NTFS then you need Paragon Software NTFS for Mac.
    NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
    If it is not NTFS then you need more details. Need more anyway.
    PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

  • External Hard Drive does not work with Lion

    Hi
    My External Hard Drive does not work with Lion this message appears:
    NTFS-3G could not mount /dev/disk1s1
    at /Volumes/My Passport because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)
    can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Cheers,

  • HT3275 Time Machine says my external hard drive does not have enough

    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.  I recently added memory, which may confuse Time Machine into thinking it is a new computer.  How can I erase old backups and complete this one?

    Walter Goodman wrote:
    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.
    See #C4 in Time Machine - Troubleshooting. 
    If that doesn't clear it up, how much data is on your Mac?  If TM is only trying to back-up 34 GB, it should be able to delete old backups to do that (assuming you're running Lion).
    It sounds like your backups may be corrupted.  Try to repair them, per #A5 in Time Machine - Troubleshooting.
    I recently added memory, which may confuse Time Machine into thinking it is a new computer.
    If that's all you did, no.  
    How can I erase old backups and complete this one?
    Just erase the drive per #1 or #2 of Using Disk Utility.

  • External hard drive does not shut down

    Hello, When my mini mac goes to sleep my samsung external hard drive does not shut down or dismount properly. when i wake computer i have a error message stating improperly ejected hard drive. It also does not reconize HD until I disconnect and reconnet??? PLEASE HELP Thank you

    My Mini was doing the same thing until I reset the PRAM. With four external drives. They would stop inadvertently with an "improperly ejected" error. Granted two of the drives went bad (6 and 7 years old) but a brand spanking new Seagate and a 3 year old Hitachi drive doing the same. Haven't seen the error since resetting the PRAM.
    If you don't know how to do that, Reboot while holding the Cmd+Opt+P+R keys until your hear the startup chime three times and then release the keys.

  • External Hard Drive does not mount

    My 2TB external hard drive does not mount and I cannot get it to.  Have tried turning the hard drive off and then back on.  No response.  Any thoughts as to how I can get it to be recognized?

    You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • External hard drive does not show up

    External hard drive does not show up in imovie.

    Hi,
    Welcome to the Discussions.
    The drive's directory is damaged and as you found Disk Utility isn't equipped to repair it. You need Disk Warrior or Tech Tool Pro.
    John

  • My external hard drive does not show when I am trying to open a document in Office Org??

    My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

    Does the drive show up under 'Devices' in Finder?

  • Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Yes.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Otherwise, you may need to do one of the following steps.
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
    If you continue to have problems with your disk, it may be physically damaged and need to be replaced

  • Canvio External Hard Drive does not appear in MY COMPUTER

    Sorry if the subject is in wrong section of the forum.
    I bought an External Hard Drive to use with my Windows 7 laptop. When connecting, sounds like a new device is connected, also appears listed in DEVICES & PRINTERS, but does not appear in MY COMPUTER, becoming impossible to access it anyhow.
    Procedures about how to format or change device letter (in DISK MANAGEMENT), although the device has been also shown there, haven't work.
    "Drivers" are listed as updated.
    Any suggestions?
    Thanks!

    Jerry, thanks for trying to help.
    I download the KillDisk as your adviced.
    The Hardware appears there like:
    Hard Disk 2 (82h) TOSHIBA External USB 3.0 - [DEVICE IS NOT READY]
          Local Disk (2 - [DRIVE IS NOT READY]
    Available actions for each are: Mark / Unmark / Refresh.
    Any possibility of it is broken, or something?

  • External Hard drive does not show up on Disk Utility

    I have a External Hard Drive that I used to use on a PC.
    Recently, I just bought a new Macbook Pro 13'' and want to transfer my documents from the old PC to the Macbook.
    My External HD requires a password that you need to type in in order to access the files.
    This password thing runs smoothly on my PC, which I can type in my password and get the files. But when I plugged it into the Mac, it didn't recognize it. It only shows the files .exe... and other that can be run by Windows.
    So I formatted the HD (I already back up the data), and put it back to the Macbook, I still cannot open it. The system does recognize the connection but when I opened the Disk Utility while still connecting to the HD, the HD does not show on the left column of the Disk Utility.
    Then I'm stuck.
    Is there anyone here can tell me what I can/should do?
    A girl who spends hours on the internet and still cannot figure out why this sh*t is happening to her.

    A lot of external drives use firmware passwords as a protection scheme.  To use them on a mac, you need to unlock the drive on a PC (I've done it in a virutal machine before).  Once unlocked, you can format the drive for use on a mac.  The firmware won't run properly on a mac so your ability to lock the drive from the mac will be gone.  You can still lock it from a PC (I think, never tried to firmware lock a drive with a mac partition on it).

  • External Hard Drive does not show up in Finder

    My external hard drive is not showing up in Finder.
    It shows up in Disc Utility, but I do not have access to it. I have tried the following:
    command-shift c, nothing happens
    confirmed in Preferences/General that external hard drive was checked
    tried another cable
    tried another port on the back of the external drive
    tried to connect through the USB port
    re-started, etc.

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • ITunes library on an external hard drive - does the HD need to be connected?

    Hi,
    I want to move my iTunes library from my windows laptop to an external hard drive to free up space. I've read up about how to do it, but the one thing that i still cant figure out is whether my hard drive needs to be continually connected for iTunes to work. Obviously this is not a easy option for a laptop and i want iTunes to work without a hard drive attached. If this is the case, what are my options? I have about 40GB in normal music files, which are being doubled by my iTunes library and taking up too much space on my internal hard drive
    Thanks.

    I have my iTunes library on my hard drive, but keep a number of mp3's on an external hard drive..but here are some things I looked at to get an idea how to best manage this:
    http://support.apple.com/kb/HT1473 ( adding content on your computer to iTunes section..important to avoid duplication)
    https://discussions.apple.com/thread/2723211
    http://support.apple.com/kb/HT1364
    Hope this helps. 

  • External Hard Drive does not show up in Finder in Tiger

    I've attached a Western Digital Mybook to my Time Capsule.
    I can access it through Finder on my MacBook. I can access it through My Network Places on the two windows PCs we have (they run XP Professional). I cannot, however, access it on my iBook G4 running Tiger (OS X 10.4.11). I can connect to the TC, but the external hard drive doesn't show up.
    This is bad, because I want to use the external as a shared drive for iTunes, etc. Has anyone else had this problem? More importantly, does anyone know of any fixes?

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

Maybe you are looking for