How do know the number of records ina cube for particular restriction
Hello all,
When you do right click on cube and display data then you have option to choose the fields. Lets say I restrict show me all the records for fiscal year "2006" then wgere can I see actually how many records there are of 2006.
Thanks
Hi Raj,
By using LISTCUBE you can put a check mark for Output Number of Hits:
If you do not select all fields in the field selection for output and have activated the database aggregation, several records may be collected together into a single record. If you select the option 'No. of Hitsoutput', an additional key figure is generated in the output table that specifies how many records the current record is made up of, that is, how many database records have been made into the output record.
You can also use this option to determine how many records there are in a particular selection condition in the InfoCube. Specify a selection condition, but do not select any characteristics or key figures. In the return list, you only get the column return with the number of hits and the number of entries that are relevant for this selection condition.
Hope this helps...
Similar Messages
-
How to find the number of records per months in cube
Hi,
how to find the number of records per months for my all cubes?
Can i use the ListCube transaction to find totl number f records per cube monthwise ?
JimmyHi,
Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
1.Copy the code into your Z<programname> from Se38.
2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
3.Save program.
4.Schedule the program in background as required
5.Create cube with infoobjects to hold no of records and Infoprovider name
6.Load this cube based on event after the program job is done.
Hence you can report on this cube to see no of records in CUBE or ODS in your box.
Please find the code below.
Cheers,
Kavitha Kamesh.
types: begin of itabs ,
tabname type dd02l-tabname,
end of itabs.
data: itab type itabs occurs 0 with header line.
data: counter type i.
data: begin of itab1 occurs 0,
tabname type dd02l-tabname,
counter type i,
end of itab1.
DATA: ITABTABNAME TYPE STRING.
DATA: LENGTH TYPE I.
DATA: OBJECT(30).
data: str(6) type c.
select tabname from dd02l into table itab where ( tabname LIKE '/BIC/F%' or tabname LIKE '/BIC/A%00' )
and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
loop at itab.
select count(*) from (itab-tabname) into counter.
str = itab-tabname.
if str = '/BIC/F'.
LENGTH = STRLEN( ITAB-TABNAME ).
SHIFT itab-tabname BY 6 PLACES LEFT.
ELSEIf str = '/BIC/A'.
SHIFT itab-tabname BY 6 PLACES LEFT.
LENGTH = STRLEN( ITAB-TABNAME ).
LENGTH = LENGTH - 2.
endif.
itab1-tabname = itab-tabname(LENGTH).
append itab1.
itab1-counter = counter.
clear itab-tabname.
clear: COUNTER.
endloop.
*********** itab1
loop at itab1.
write:/ itab1-tabname, itab1-counter.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
FILENAME = 'c:records.xls'
FILETYPE = 'ASC'
* APPEND = ' '
WRITE_FIELD_SEPARATOR = ','
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* IMPORTING
* FILELENGTH =
TABLES
DATA_TAB = itab1
* FIELDNAMES =
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* OTHERS = 22
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to find the number of records in ods?
how to find the number of records in ods?
Pls suggest the solution apart going to the table of ods and seeing the number of records.
Is there any program or function module to see the number of records in ods?
For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.Hi,
I was looking at this and found the following tables that may be of help.
One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
DBSTATTADA
DBSTATTDB2
DBSTATTDB4
DBSTATTDB6
DBSTATTINF
DBSTATTMSS
DBSTATTORA
We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!) -
How to set the number of records displayed at run time
Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!
Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica -
How to know the count of record in CR XI?
Post Author: Liu ming
CA Forum: Deployment
Hi All,
I create a report by CR XI release 2. The report is viewed in ASP.Net. So, I would like show a message when the report have no record. My question is how to know the count of record?
Thanks.I was able to do this by using
ora:countNodes('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500') -
[ASK] How to know the number of usage of each Atomic Service ??
I correct my question:
*How to know the number of usage of each Atomic Service by the Domain & Enterprise Services?*
I want to see the number of usage of each atomic service(AS) by other services (DS & ES)
ex:
es_A -----> ds_B (1x) -----> as_B (2x) --> so as_B is accessed by es_A twice (2x)
es_A -----> ds_C (2x) -----> as_C (2x) --> so as_C is accessed by es_A 4times (4x)
es_A -----> ds_B (2x) -----> as_D (3x) --> so as_D is accessed by es_A 6times (6x)
es_B -----> ds_B (1x) -----> as_E (1x) --> so as_E is accessed by es_B once (1x)
es_B -----> ds_C (3x) -----> as_F (2x) --> so as_F is accessed by es_B 6times (6x)
es_B -----> ds_B (4x) -----> as_G (1x) --> so as_G is accessed by es_B 4times (4x)
etc..
Is there any tool in OSB, WLS, BPEL Console or Java Developer to support it?
Thank you...user13294928 wrote:
Ganesh wrote:
Their are two ways to do this
1. In the sbconsole, when you click on the proxy or any resource name, you will see information about number of references and referenced by as two parameters. Click on the number you will drill down into exact schemas, business service, split joins, etc it refers and who all refers this resource.--> Where can I see the information?
2. In the OEPE, eclipse you can see the same in the "Reference" view of the OSB perspective.--> I'm using Java Developer right now, does it work?Thank you1. You can see the reference in: sbconsole -> Resource View -> Click on Proxy or any resource name -> it will show Ref: <n> some number and -> Click on the number. Do you see this?
2. JDeveloper should also have a resource view, but have not tried it though -
How to get the number of decimal places configured for a site column
Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijitGet the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat; -
How to get the number of records of a streaming result set
Hi guys.
So if it wasn't a streaming result set, I would have done this:
{noformat}myResultSet<code class="jive-code jive-java">.last();
{color:navy}*int*{color} numResults = </code>myResultSet<code class="jive-code jive-java">.getRow();
</code>myResultSet<code class="jive-code jive-java">.beforeFirst();
</code>{noformat}
but being a streaming result set, beforeFirst() throws an exception...
So how do you get the number of records in that result set? I wanna avoid an extra count(*) query, so I would appreciate other solutions than that.JoachimSauer wrote:
vanwil wrote:
you see, for now I just use a count(*) query to get the number of records, but that's adding a lot of extra waiting time...Iterating over the result twice will surely be slower then doing the count(*).great! so what I got now is actually the fastest way there is... awesome...
If you get an exception, then you surely have a stack trace. That should tell you what happens, or at least where.com.mysql.jdbc.MysqlIO.checkForOutstandingStreamingData(MysqlIO.java:2066)
Why do you need to know the number of elements beforehand, anyway?I need to know the number of elements because the incoming data goes into a table. Now of course, I could use ArrayList<String[]> or something, but wouldn't that require more memory resources than Object[][] ?
No one can tell you that, at least not without more information (say, the stack trace for example).Here's the exception message:
java.sql.SQLException: Streaming result set com.mysql.jdbc.RowDataDynamic@10c0ef2 is still active. Only one streaming result set may be open and in use per-connection. Ensure that you have called .close() on any active result sets before attempting more queries. -
How to limit the number of records in WebI Report
Hi,
I have a requirement where I need to display the WebI Report data only if the number if record is less than 65k.
Incase if the records are more than 65k then the report should be blank and a text message needs to be displayed.
The client dont want to set the number of records either in universe or at the edit query at the report. They want to limit once the report is executed.
Please let me know if its possible to do it at the report level.
Thanks in advance!!
Best Regards
SAP BOOptional prompts are not a problem.
Assuming you first query uses the following SQL statement
select a,b,c from t where x=y and z=@prompt(...)
The query for checking the number of rows should use the following SQL code
select count(*) from t where x=y and z=@prompt(...)
The original query should be modified as follows
select a,b,c from t where x=y and z=@prompt(...) AND (select count(*) from t where x=y and z=@prompt(...)) < 65000
Regards,
Stratos -
How to calculate the number of records in Multiprovider
Hi Experts
I have created a report based on the multiprovider (Consist of Cube and ODS)
I need count the number of records inside the multiprovider, how can i do it in the reporting level
Regards
SantoshHi,
You can use calculated key figure with replacement path variable.
Follow This:
1) From the context menu of the Key Figure directory, choose New Calculated Key Figure.
2) From the context menu for the Formula Variable, choose New Variable.
3) Choose the Processing type as Replacement Path.
4) In the next screen, select the Characteristic Info Object based on which the number of documents is to be displayed in the report (For example: Document Number / Order Number).
5) Choose Next.
In the Replace Variable with drop down box, choose Attribute Value.
In the Attribute drop down, select Characteristic Reference (Constant 1).
6)Choose Next.
On the Save Variable page, an overview of the settings made for the variable will be displayed.
Confirm the entries and Choose Finish.
7) If the Formula variable is directly assigned to the Calculated Key Figure, a warning Calculated Key Figure is not defined correctly will be displayed while executing the Query.
8) Properties of Calculated Key Figure dialog box, assign a Technical name for the CKF.
9) set the Time of Calculation to After Aggregation.
Hope this will help you.
Cheers,
DK
Edited by: Debasish Khaitan on May 14, 2009 1:03 PM -
How we know the Number of users logged into stratus?
Hai,
How can we know the number of users logged into stratus? If we knows only,in our project we can check the users are valid/authenticated.can we check that?
Advanced ThanxStratus is adobe service which provides you with p2p id or say all your
application's users a p2p id. Adobe doesn't have any admin section where you
can manage/see all connected p2p users in your application.
This you have to implement at your end in your application code i.e.
authentication,validation and user counter.
Thanks,
Vivek. -
How to know the number of children at the first visit of a view ?
Hello,
I'd like to make a modification to the JSF lifecycle so that when a view is first visited, it is possible to know the number of children before the RenderResponse phase.
It seems that, following the RI source code, the dispatch method of the ExternalContext is called.
This method calls itself the RequestDispatcher of the javax.servlet package.
How can I do that ?
Thanks in advance.
bgOnlineI've been here all the time, ever since I got my G4 and could finally OS X (started with 10.1.5). Don't know how ya coulda missed me.... I'm usually in the Using the OS Forum and the Finder forum, with occasionaly excursions in the Spotlight forum.
BTW, so this isn't completely off topic, after getting frustrated by the file count and Finder displaying correct sizes I experimented with a couple of Applescripts but then found a wonderful little Contextual Menu item, CalculateSize:
http://www.pixture.com/software/macosx.php
It tells you not only the number of files and sub-folders in a given folder, it also tells you the number of invisibles of each and the total size of the items, and it calculates sizes ever so much faster than the Finder does.
Francine
Francine
Schwieder -
How to know the number of times end users search on iStore
How can we know the number of times end users search on iStore
I am not sure how can you do that with Oracle but I am doing that with Google Analytics (Site Search Settings).
Thanks
Shazi
Edited by: 903823 on Nov 30, 2012 7:59 AM
Edited by: 903823 on Nov 30, 2012 7:59 AM -
How to know the number of the week in iCal ?
Hi !
I'm very enjoying iCal. But, there is something very important for me that I can't find in iCal !
I need to know the number of the week (in Month, Week or Day views).
Is that a way to easily see it ?
Regards,
ant
iMac G5 Mac OS X (10.4.2)there's no option for a week view in iCal, but John Maisey wrote this applescript.
paste it in the Script Editor (Applications --> AppleScript --> Script Editor) and run it once...
if your weekview starts on an other day change this line:
set daysText to "MonTueWedThuFriSatSun"
to (example)
set daysText to "SunMonTueWedThuFriSat"
--Copy below this line into Script Editor and click run --
--Annual Week numbers
--John Maisey
--4/2/5
set numberOfWeeks to 1000 -- change as needed
set daysText to "MonTueWedThuFriSatSun"
set aDate to (current date)
set day of aDate to 1
set month of aDate to January
set aDay to weekday of aDate
set weekNo to 1
--Day of week as num. starting with 0
set aDayText to (characters 1 thru 3 of (aDay as text)) as text
set dayOff to ((offset of aDayText in daysText) - 1) / 3 as integer
if dayOff is less than 5 then
set StartDate to aDate - dayOff * days
else
set StartDate to aDate + (7 - dayOff) * days
end if
tell application "iCal"
set newCal to make new calendar at end of calendars with properties {title:"Week No."}
set myCal to (count of every calendar)
end tell
repeat with myCount from 1 to numberOfWeeks
if (month of StartDate is December) and (day of StartDate is greater than 28) then set weekNo to 1
if (month of StartDate is January) and (day of StartDate is less than 5) then set weekNo to 1
set weekText to "Week No. " & weekNo
tell application "iCal"
tell calendar myCal
make new event at end of events with properties {start date:StartDate, allday event:true, summary:weekText}
end tell
end tell
set weekNo to weekNo + 1
set StartDate to StartDate + 7 * days
end repeat
-- -
How to count the number of records retreived through a query?
Dear All
I want to find the total number of records retreived for a particular query .
does BW provide any internal count function , which can solve my requirement??
if yes, please provide some details.
Thanks.
Regards,
Pandurang.hi pandurang
when u see the contents of a particular cube
RSA1->Infocube->manage->contents
there is a option "Output number of Hits"
An extra keyfigure is created displaying the number of records rolled up
Aggregating the column might just solve ur issue
Try
Regards
Akshay
Maybe you are looking for
-
Set res/PR indicator in PM refurb order based on item category
Hi, We are loading components of a refurbishment order from the bill of material of the header material. Actually the operations and components are defined in a general maintenance task list and the task list is included in the order. The components
-
How to restore my iPhone 3G, ios 3.1.3, from backup without updating.
How do I restore my iPhone 3G, ios 3.1.3, from a backup without updating. I need to restore my ical entries and they are wiped out on both my main and backup drive and mobile me. My phone is also wiped out and I think my back up may be my only hope
-
"Some Updates Failed to Install" when trying to update PhotoShop CS5 on MacBook Pro Retina laptop
Is there a way to make the update install?
-
Does Adobe DC support editing text in a text box? How?
I was able to edit text in a text box with my Adobe 9. Adobe DC does not seem to support this. Can anyone offer any assistance?
-
How can i use panaroma wallpaper in iphone4 in ios7.1
how can i use panaroma wallpaper in iphone4 in ios7.1