How do often do I need to recertify with Comcast to access WatchESPN?

I'm hoping to use Apple TV to replace my cable provider (Comcast). However, some of my "must have" programing requires having an active TV subscription with the content. For example, to get my sports via WatchESPN on Apple TV I have to have a Cable provider that certifies me to access that content. I've done the certification on Apple TV via Comcast and can currently access WatchESPN. However, if I cancelled Comcast would it immediately know that and "decertify" me. Likewise, how often would I need to re-certify? My concern is that I'll need to recertify after cancelling and be unable to access Watch ESPN.
Thanks!

How long would it take for you to lose that programming? Hard to say, and would likely vary in different situations, but yes, ultimately you will lose it sometime after your Comcast account is deactivated. I would guess sooner than later.

Similar Messages

  • How many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends

    how many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends
    I have had thehad the:
    ram replaced
    Battery
    Audio
    Trackpad
    os operating system
    fans
    And they still won't replace the laptop for me worst buy ever but i have had a imac for 2 months and nothing at all wrong .

    You could try calling Apple and ask for Customer Relations.
    From Readers Digest-February, 2005
    How to Complain
          You call customer service to complain about a product, and you hang up angrier than when you started. That’s customer rage, a feeling experienced by millions of people with a major complaint, says Scott Broetzmann, president an American firm that tells companies how to offer the best customer service. His secrets to getting good service:
    Have a goal
    If you want your product repaired, say so. Want an apology? Speak up.
    Keep it short
    Focus on one problem, and be succinct.
    Stick with it
    You have to invest the time it takes. Don’t get what you want? Ask for a supervisor.
    Skip ultimatums
    Don’t threaten not to do business with them again. Why should they help you if you won’t buy from them in the future?
    Plead your case
    Many companies have information such as how much money you’ve spent with them and how often you complain. If you’re a good customer, they may be more willing to help.
    Be nice
    You’re unlikely to get what you want if you’re rude.
    Good luck.

  • How to set up a local testing server with local-only access

    Hi folks,
    I've reached the point where I need to do some simple server-side scripting in my Dreamweaver work. I work remotely pretty often, so I want to be able to preview my work without having to go back and forth to the production server. It seems to me the solution would be to install a little web server on my laptop, BUT I'm concerned about security. Is there any way I can set up a local webhost but not make it accessible to the outside world?
    I'm really pretty clueless about this stuff, so I'd appreciate any advice. Thanks!
    -Kim

    I would recommend using XAMPP Lite.  It's very lightweight and portable when installed on a USB drive or flash stick. 
    http://www.howtogeek.com/howto/14998/
    Nancy O.

  • How do I get Java 7 to work with my remote access token to Kaiser on my Mac 10.7.5?

    Since I updated Java last week I do longer can get to my Health Connect Site. I get to the page for Java and hit run. Then a window opens, it starts to transfer data. Then it stops and says error. I have gone thru Kaiser's IT and Apple Support. Both tried and could not correct the problem. I have been getting on this site with Firefox for over 2 years. How do I correct this problem with Java or Firefox?

    Hi eeg0,
    Thank you for posting your question. In order to better assist you, please provide the following troubleshooting information:
    *what is the error that comes up?
    *Logs of the page from the webconsole- make sure there is no personal information here.
    *Have you added the site to the exceptions list in the Java Console?[http://www.java.com/en/download/help/javaconsole.xml]
    If you need any help, we are happy to help.

  • I need some help with MIDI and accessing samples

    I recently purchased Logic Express 9. I'm really happy with it--it's certainly a step up from Garageband--but I'm having trouble connecting my MIDI keyboard. In Garageband, I was able to just plug the keyboard in using a MIDI/USB cable and play software instruments immediately. But in Logic, when I connect the keyboard (a Yamaha PSR-273) into a USB port, it doesn't even register! Right now, the only way for me to play software instruments is through the Capslock keyboard, and I would prefer to play on real keys. How can I connect my keyboard so I can play Logic software instruments?
    Also, I read on the Apple website for Logic Express that there are "More than 1000" sampled EXS instruments, including "strings, horns, woodwinds, guitars..." etc. The only EXS instruments that I've been able to find are synthesizers. Where are the other EXS instruments and how can I access and use them?

    Make sure that the keyboard is turned on before you launch Logic.
    In the system preferences of the computer is it connected?
    In the preferences of Logic, does it give you an option in the audio section to use the driver in your keyboard? That should come up if its connected

  • How to enable my macbook pro to login with cac card access instead of traditional username and password?

    Someone please help me figure this out.

    Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".

  • Why can't I access my gmail contacts from gmail app whilst on gmail; subtext: why do I need to sync with iTunes to access my contacts?

    Why?

    You don't. I don't sync my Gmail contacts through iTunes. The Mail app accesses them just fine. You just have to set up the Gmail account as an Exchange Account. The instructions are available in Google's help documents.

  • PSE10 - How to get the online help on PCs with no Internet Access ?

    Hello,
    Our company has bought several licences of Photoshop Elements 10 and would like to package the installation in order to be able to install it with SCCM (formelly called SMS) on PCs.
    The issue we've got is that the PCs in our company don't have Internet access, so Users can't, after the installation, download the help online... and since there is no offline help included, that means they don't have any help at all.
    Can you let us know where the help in question is copied when it is downloaded, so that our packaging team will be able to download those files from a PC with Internet Access and then add them in their package so that our Users will be able to read the Help (F1) even if they don't have Internet access ?
    Thanks a lot for your reply

    yes you can do that by changing settings in Adobe Help Manager
    Open Adobe Help.exe from the location :  c:\program files (x86)\Adobe\Adobe Help
    Then in the download prefrences section , you can select the products you wish to have offline help
    In the updater section select manually
    In the local content section : select the product and click UPDATE
    when the offline help is downloaded, then in the general section, select Yes (this will make the local help default)
    Now if you can go offline, and press F1 within the program , it will open the local help
    Hope it helps !!

  • How can I avoid the need to OFTEN refresh or recover HP 2000 notebook?

    How can I avoid the need to OFTEN refresh or recover HP 2000 notebook? Windows 8.0.

    I found your support page by searching E0M18UA#ABA (as opposed to EOM18UA#ABA) which I assume was a simple typo. To answer your original question, the answer is to identify and isolate the cause of the errors and issues you are experiencing. Once you identify each issue, you can find what it takes to get beyond them without having to refresh or recover so frequently.
    You can only troubleshoot and identify the issues that are currently happening. If you are getting freezing right now, first take a look at this document specific to the freezing to narrow down the cause: Computer Locks Up or Freezes (Windows 8)
    A link to this document is contained in the previous one, but it is worth pointing out that this might be valuable to test for hardware failures: Testing for Hardware Failures (Windows 8)
    Another valuable tool when trying to identify the source of the problems, is to perform a clean boot after having one of the issues and trying to recreate it. This shows how to  remove  startup items. A good strategy is to disable half of the available items first, then restart and try to recreate the issue. If you cannot recreate it then perhaps there is a problematic startup item. If you can recreate it then disable half more, and repeat a few times until you empty the startup items.: How to perform a clean boot in Windows
    I hope this helps, and by no means is this a recipe to fix your current issues, but a few strategies to help you better identify the issues.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How do I turn off "your recent download with your apple id" emails? Annoyingly often and they fill up my inbox.

    How do I turn off "your recent download with your apple id" emails? Annoyingly often and they fill up my inbox.  Is there a way to unsubscribe from these?

    It is in Settings>iTunes & App Stores to change automatic downloads. But it isn't your device that needs to be changed if you are the one that made the download. He needs to turn off the setting for automatic downloads on his phone. I'm guessing here, but you are all sharing the same Apple ID?

  • Buying a new iMac... how much power do I need to run GarageBand well?

    Hi All
    I am about to get a 27" iMac but am weighing up the options for the processor and memory (and maybe hard drive too). Neither my wife nor I are into gaming or high end graphics stuff, so we do not need an i7 with 16GB ram... but is the bassline 27" iMac powerful enough to run GarageBand with no problems?
    I have not really used it much before as our laptop is about 6 years old and it really struggles running GB, hence I have not been keen. However as I am a musician and am about to get a new computer... I am keen to find out just how much power I'll need.
    At this stage, I want to play around with GB and dop some aranging, not sure how many tracks this will end up equating to as my experience grows... but unless I really get into it, I am unlikely to progress to Logic or similar... but if I did, would I need more than the baseline?
    So in short... do you guys think the 27" iMac i3 with 4GB RAM will cut it for someone who is getting started but wants to spend a reasonable amount of time in GB? Why/why not?
    Thanks

    TuningPeg wrote:
    In order to fully understand what you just said to me... I had better find out what an 'Addictive Drum AU' is. I am quite teh newbie when it comes to digitally recording, either from a real instrument or a virtual one.
    I am assuming that the Addictive Drum is fairly intense when it comes to the CPU? Are there many other virtual instruments that are hard on the CPU? For an average user I am assuming this will not pop up to often, correct?
    Garageband is not a 'closed system' in that you are stuck with what it offers. You have the option to use 3rd party software to enhance your productions. AU stands for Audio Unit, a coding standard around which many 3rd party developers use to integrate with Mac products. As you develop your own habits and tastes with your productions, you might decide that the options GB offers you are not to your liking. This is where these sorts of products come in. They are very easy to use with GB. Addictive Drums is a Drum program that is actually lightweight on your system compared to others. The only reason I had 8 instances (one loaded on 8 individual MIDI tracks) was because of a limitation GB has. It suited my workflow to do it this way.
    There is a huge range of AU's available, Native Instruments being a company that does a very good set of products. Some are indeed very CPU intensive, others are not. You have to do your research by asking questions on various forums and seeking reviews etc.
    The term 'Average User' really means nothing in my honest opinion. Depending on your preferred genre of music and how you go about hooking into this slippery slope of hobby home recording, you may bump into a variety of limitations either in GB itself or limitations because of your machine. Because RAM is easily replaced by the owner and hard drives are easily obtained for extra storage, CPU is the thing your are stuck with from day one. Programs are getting bigger and they are relying on lots of number crunching. Amp simulations are a good example of CPU intensive software. It is easy to find yourself spending $60 here and $99 there on all sorts of cool Software, and before you know it you have quite the quiver full. I am not a heavy GB user, in that I don't run 30+ tracks on my projects. I am a 12-16 track average user most of the time. However, the reason I upgraded to my iMac recently was because I had one piano AU, yes just one, that stopped my 2 year old macbook in its tracks when using another recording program. I had all the RAM that GB could use, an excellent hard drive and a very good sound card, but the computers lack of grunt made working with it tedious and sometimes frustrating. You more than likely have a budget to work with when getting your machine. The advice I would give any personal friend who was getting their first computer for recording is to get the most CPU you can for your budget. You could be staring at this machine for the next 4-6 years. Typically RAM and hard drives get cheaper over time should you need them, relatively small prices to pay in the long run.

  • I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    Did you remove Quicktime X?
    On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
    You will need to reinstall OS X to get Quicktime X back if you have deleted it.
    I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

  • I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad. How can I found out if I will be able to access all the functionality in Alice? Will I need to purchase a local plan of some sort?

    I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad to use while traveling back and forth from the U.S. to Australia, and within Australia. How can I found out if I will be able to access all the functionality of the iPad in Alice? Will I need to purchase a local plan of some sort? I have never owned an Apple product before -- I'm a newby!

    Aside form the limitation of LTE to the 700MHz and 2.1GHz bands (which rules out LTE in Europe I gather, at least as it stands now) the new iPad should let you use a GSM 3g/2g/edge network anywhere.  The CDMA Verizon model will only be able to use it's native CDMA radio band in the USA (that radio will be locked to Verizon), but it's international GSM radio is the same as the AT&T model.
    Keep in mind though that by far the cheapest option when abroad is to take advantage of free wifi as much as possible (well, that is always the cheapest option, since it is free).  I know several people who have taken their wifi-only iPads and iPad2s to Europe and said they did not find the lack of 3G really inconvenient at all as most towns had plenty of free or cheap wifi access all over the place.
    And in 3 years, your iPad will be at least 2-3 generations behind, LTE will have already been replaced by 5G or whatever the next new generation of cellular ends up being named (and the "young" kids will be wondering what the heck 3G even means or meant - dang that stuff was from the olden days!), and you can pitch that ancient piece of technology and start things all over again 

  • When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID  and also on r PC it has only his info none of mi

    When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID  and also on r PC it has only his info none of mi

    To change the iCloud account on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password when prompted to turn off Find My iPhone.  When you delete the account you will be given the option to either keep or delete the iCloud data from your phone.  This also, only deletes the account and the iCloud data from your phone, not from iCloud.  Your husband's phone won't be effected by this.  Then, to create a separate account, sign back in with a different Apple ID (you can continue to share the same ID for iTunes).
    If you have any photo stream photos that you want to keep on the phone, save them to your camera roll before deleting the account. 
    If you're sharing the same ID for iMessage and FaceTime you'll end up getting each other's text messages and FaceTime calls.  To prevent this, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with your new iCloud ID.  Then do the same thing in Settings>FaceTime.

  • HT201303 how do i associate a different apple ID with my ipad?  I need to do this bc my gmail account was hacked and a hoax email sent out from it. so i opened a new gmail account and want to associate this new email with my ipad

    how do i associate a different apple ID with my ipad?  I need to do this bc my gmail account was hacked and a hoax email sent out from it. so i opened a new gmail account and want to associate this new email with my ipad

    To check if you have a virus, you can download ClamXav
    also, go to Applications>Utilities>Activity Monitor and see if there's anything that you don't recognize, and check your sent email to see if you've been sending emails without your knowledge.

Maybe you are looking for

  • Adobe Acrobat 9 pro Extended in SPANISH

    hello i just download from the site the 30 days TRIAL of Adobe Acrobat 9pro Extended in SPANISH. I get the 2 files called: 1-) APEX9_Win_WEB_WWEFG.7z and 2-) APEX9_Win_WEB_WWEFG.exe. When i run the .exe file the program only let me to install it in E

  • Using Geometry Functions in Spatial

    Hi, I met a problem using geometry function in Oracle Spatial. For example, when I use the function of SDO_GEOM.SDO_DISTANCE, I have to write this way: SDO_GEOM.SDO_DISTANCE(a.point, m.diminfo, b.point, m.diminfo) That means both points have to be a

  • Warranty Popup not coming while creating maintenance order

    Dear Experts,              I have created master warranty for distance covered having unit Mile. Created counter with same charateristic and unit (ie mile). In the equipment master data entered the master warranty no and start date.               Now

  • User Exit at SAP Easy Access

    Dear Team, Please suggest any User Exit at SAP Easy Access.Which can activate after entering TCODE. Regards, Subhash Karidhal

  • How to see debug information without turning on the CF administrator Debugging settings?

    Hi All, I want to see the debug information on a web page without Turning ON the debugging settings in CF administrator. http://helpx.adobe.com/coldfusion/kb/coldfusion-debug-information-using-mode.html In this link, they have given by adding mode=de