How do we anchor to top of page on page load?

HI! I use iframes and when a user clicks a link in the middle
of a page it
loads the new child iframe in the iframe BUT the new page is
at the same
vertical spot as the previous page. I want the page to be
loaded at the top
so the user can see the see it at the beginning.
I thought of adding an anchor to the link but this would put
the child page
at the top but also hide the top of the main parent. so is
there way of
loading the child page and at the same time make the parent
page stay at the
top?'
Paul

darrel wrote:
>> Lets say you have a normal page ( without Iframes )
and at the bottom of
>> the page you have a link. now, if you click on that
link the page will
>> load and you will now be at the top of that page,
right! now. in my case
>> however you will not be at the top, you will be in
fact at the bottom of
>> the new page.
>
> What do you mean by 'new page'?
>
> If you mean the link you are clicking on ONLY loads a
new page within the
> iFrame, then this is perfectly normal. You are not
loading a new page
> within the browser--you're staying on the same page, as
such, nothing
> should change with the parent page...only the iFrame.
>
>> so I figure perhapes a function that works with an
onload event.
>
> You could probably use javascript. Have the onClick
event handle that. I
> don't know what syntax to use off the top of my head,
though.
>
> That said, why are you using an iFrame? They're often
used for wrong
> reasons. I bet we can figure out a better solution for
you without iframes
> at all.
>
> -Darrel
Hi! I use iframes to load templates that are brought in by
java script. My
design has a top flash animation with static expandable
images on both sides
and iframes are used on one side to display the templates and
the other side
is text. The Parent does not get reloaded because I dont want
the flash
animation to be reloaded as it take a few seconds to load. so
by using
iframes I only need to load the flash ani once. and the other
pages that
make up the larger part of the page are loaded into the
iframe.
Now that I think of it, I dont think the unload event in the
body would work
because this means that body would have to be reloaded. I
would have to
trigger it another way. so I would have to trigger it from
either inside
childpage that gets loaded or from the link itself. hmmm, do
you have any
ideas?
Paul

Similar Messages

  • How do you add a "top of page" button to an iWeb page?

    How do you add a "top of page" button to an iWeb page?

    Two solutions:
    The Easy One:
    Create a Form (which will be the button) and add text to it or choose a picture from iphoto. Now give the form/picture a hyperlink to the same site. So now if you press the button, the site will refresh and start at the beginning/top
    The advanced way:
    1. Publish your site on the web (not just local). Copy the URL
    2. Now create a Button like displained in the solution above. As Hyperlink you'll now have to set external site and paste the before copied link AND add the following at the end of the url:      #widget0
    3. Add a html widget to the top of the site.
    4. The widget's content should be   <a name="anchor"></a>
    5. Publish your site again on the web and look wether it works.
    This way won't work, if the created site is linked as an iframe.

  • How do I edit my Top Sites Page on Mavericks?

    I am trying to figure out how do I edit the top sites page. Before you were able to click an edit button that allowed you to delete and pin the pages but now I can't figure it out. More specifically I want to know who to delete certain pages.

    I know this is old, but I just figured I would shed some light on solving the issue I think you are actually speaking of. When I upgraded, I immediately noticed I could not click "edit" in the bottom corner to change the amount of top sites, which slightly irritated me. I tried everything, and eventually thought they had done away with the feature altogether, but then I saw if you click safari (from here, that Bold Safari word in the top left corner of the screen) and choose 'preferences' it will take you to a tab that allows you to modify the number of top sites, allowing me to go back down to 6. Easier to read, easier to make sense of. (A lot of websites cannot be made out when they are '16 top site' size. So this was something I wanted to fix, with my 11" screen.) Hope this helps!

  • How to manage wait time in between pages loading

    Hi,
    Could you please help me "How to manage wait time in between pages loading while playback script using etester?
    Thanks,
    RJ.

    RJ
    You can edit the think time in eTester by:
    Expand the tree node and right click on the address bar to select Address Properties, you can then edit the text box called Delay Before PlayBack
    If you like to specify think time between actions instead of action groups: right click on the actions ans select properties, there are 2 text boxes in the new window; one for milliseconds and the other for seconds
    Hope this helps
    Alex

  • How to display values in top of page in ALV report

    Hai,
      This is my billing report program, i developed that object by using ALV but i could not able to use Top-of-page. please any one correct my code,
    *& Report  ZE0232_ALV_BILLING                                          *
    report  ze0232_alv_billing.
    type-pools: slis.
    data: repid like sy-repid.
    data: fieldcatalog type slis_t_fieldcat_alv,
          wa_fieldcatalog type slis_fieldcat_alv.
    data : ievent type slis_t_event,
    wevent type slis_alv_event.
    data: sal_text like tvkot-vtext,
          DIS_TEXT LIKE TVTWT-VTEXT,
          DIV_TEXT LIKE TSPAT-VTEXT.
    tables: vbrk.
    data: begin of i_vbrk occurs 0,
          vbeln like vbrk-vbeln,
          fkdat like vbrk-fkdat,
          erdat like vbrk-erdat,
          kunrg like vbrk-kunrg,
          name1 like kna1-name1,
          netwr like vbrk-netwr,
          stext like tvkot-vtext,
          dtext like tvtwt-vtext,
          divtext like tspat-vtext,
          end of i_vbrk.
    selection-screen begin of block billing with frame.
    parameters: salesorg like vbrk-vkorg.
    select-options: dischanl for vbrk-vtweg,
                    division for vbrk-spart,
                    bildat for vbrk-fkdat.
    selection-screen end of block billing.
    select vbeln fkdat erdat kunrg netwr from vbrk into corresponding fields of table i_vbrk where vkorg = salesorg
                                                                                    and vtweg in dischanl
                                                                                    and spart in division
                                                                                    and fkdat in bildat.
    select vtext from tvkot into sal_text where vkorg = salesorg and spras = 'EN'.
    endselect.
    select vtext from TVTWT into DIS_text where VTWEG IN dischanl and spras = 'EN'.
    endselect.
    select vtext from TSPAT into DIV_text where SPART IN DIVISION and spras = 'EN'.
    endselect.
    loop at i_vbrk.
      move: sal_text to i_vbrk-stext,
            DIS_TEXT TO I_VBRK-DTEXT,
            DIV_TEXT TO I_VBRK-DIVTEXT.
      modify i_vbrk.
    endloop.
    perform get_fieldcatalog.
    call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
        i_callback_program                = repid
      I_GRID_TITLE                      =
        i_callback_top_of_page            = 'TOPS'
        it_fieldcat                       = fieldcatalog
      tables
        t_outtab                          = i_vbrk
    exceptions
       program_error                     = 1
       others                            = 2.
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    *&      Form  GET_FIELDCATALOG
          text
    <b>form tops.
      write :/ 'Hai Welcome'.
    endform.                    "tops</b>&----
    *&      Form  get_fieldcatalog
          text
    form get_fieldcatalog.
      wa_fieldcatalog-col_pos = '1'.
      wa_fieldcatalog-fieldname = 'VBELN'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'SALES DOCUMENT'.
    WA_fieldcatalog-rollname  = 'VBELN'.
      wa_fieldcatalog-hotspot   = 'X'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
      wa_fieldcatalog-col_pos = '2'.
      wa_fieldcatalog-fieldname = 'FKDAT'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'BILL DATE'.
    WA_fieldcatalog-rollname  = 'VBELN'.
    WA_fieldcatalog-hotspot   = 'X'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
      wa_fieldcatalog-col_pos = '3'.
      wa_fieldcatalog-fieldname = 'ERDAT'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'CREATED DATE'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
      wa_fieldcatalog-col_pos = '4'.
      wa_fieldcatalog-fieldname = 'KUNRG'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'CUSTOMER NO'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
      wa_fieldcatalog-col_pos = '5'.
      wa_fieldcatalog-fieldname = 'NAME1'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'CUSTOMER NAME'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
      wa_fieldcatalog-col_pos = '6'.
      wa_fieldcatalog-fieldname = 'NETWR'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'NET VALUE'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
      wa_fieldcatalog-col_pos = '7'.
      wa_fieldcatalog-fieldname = 'STEXT'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'SALES ORG'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
      wa_fieldcatalog-col_pos = '8'.
      wa_fieldcatalog-fieldname = 'DTEXT'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'DIS.CHANNEL'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
      wa_fieldcatalog-col_pos = '9'.
      wa_fieldcatalog-fieldname = 'DIVTEXT'.
      wa_fieldcatalog-tabname   = 'I_VBAK'.
      wa_fieldcatalog-seltext_m = 'DIVISION'.
      append wa_fieldcatalog to fieldcatalog.
      clear wa_fieldcatalog.
    endform.                    "GET_FIELDCATALOG

    HI see this report
    you can know how to write TOP-OF_PAGE code
    and insert LOGO also
    *& Report  ZTEST_ALV_LOGO
    REPORT  ztest_alv_logo.
    TYPE-POOLS : slis.
    *ALV Formatting tables /structures
    DATA: gt_fieldcat TYPE slis_t_fieldcat_alv.
    DATA: gt_events   TYPE slis_t_event.
    DATA: gs_layout   TYPE slis_layout_alv.
    DATA: gt_page     TYPE slis_t_listheader.
    DATA: gs_page     TYPE slis_listheader.
    DATA: v_repid     LIKE sy-repid.
    *ALV Formatting work area
    DATA: w_fieldcat TYPE slis_fieldcat_alv.
    DATA: w_events   TYPE slis_alv_event.
    DATA: gt_bsid TYPE TABLE OF bsid WITH HEADER LINE.
    INITIALIZATION.
      PERFORM build_events.
      PERFORM build_page_header.
    START-OF-SELECTION.
    *perform build_comment.     "top_of_page - in initialization at present
      SELECT * FROM bsid INTO TABLE gt_bsid UP TO 10 ROWS.
    *perform populate_for_fm using '1' '3' 'BUKRS' '8' 'GT_BSID' 'Whee'.
    *USING = Row, Column, Field name, display length, table name, heading
    *OR
      PERFORM build_fieldcat.
      gs_layout-zebra = 'X'.
    *top of page event does not work without I_callback_program
      v_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program                = v_repid
          i_structure_name                  = 'BSID'
       i_background_id                   = 'ALV_BACKGROUND'
          i_grid_title                      = 'This is the grid title'
      I_GRID_SETTINGS                   =
          is_layout                         = gs_layout
          it_fieldcat                       = gt_fieldcat[]
          it_events                         = gt_events[]
        TABLES
          t_outtab                          = gt_bsid.
    Form..............:  populate_for_fm
    Description.......:  Populates fields for function module used in ALV
    FORM populate_for_fm USING p_row
                               p_col
                               p_fieldname
                               p_len
                               p_table
                               p_desc.
      w_fieldcat-row_pos      = p_row.          "Row Position
      w_fieldcat-col_pos      = p_col.          "Column Position
      w_fieldcat-fieldname    = p_fieldname.    "Field name
      w_fieldcat-outputlen    = p_len.          "Column Lenth
      w_fieldcat-tabname      = p_table.        "Table name
      w_fieldcat-reptext_ddic = p_desc.         "Field Description
      w_fieldcat-input        = '1'.
      APPEND w_fieldcat TO gt_fieldcat.
      CLEAR w_fieldcat.
    ENDFORM.                    " populate_for_fm
    *&      Form  build_events
    FORM build_events.
      DATA: ls_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type = 0
        IMPORTING
          et_events   = gt_events.
      READ TABLE gt_events
                 WITH KEY name =  slis_ev_user_command
                 INTO ls_event.
      IF sy-subrc = 0.
        MOVE slis_ev_user_command TO ls_event-form.
        APPEND ls_event TO gt_events.
      ENDIF.
      READ TABLE gt_events
                 WITH KEY name =  slis_ev_top_of_page
                 INTO ls_event.
      IF sy-subrc = 0.
        MOVE slis_ev_top_of_page TO ls_event-form.
        APPEND ls_event TO gt_events.
      ENDIF.
    ENDFORM.                    " build_events
    *&      Form  USER_COMMAND
    When user command is called it uses 2 parameters. The itab
    passed to the ALV is in whatever order it currently is on screen.
    Therefore, you can read table itab index rs_selfield-tabindex to get
    all data from the table. You can also check r_ucomm and code
    accordingly.
    FORM user_command USING  r_ucomm     LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
      READ TABLE gt_bsid INDEX rs_selfield-tabindex.
    error checking etc.
      SET PARAMETER ID 'KUN' FIELD gt_bsid-kunnr.
      CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
    ENDFORM.                    "user_command
    *&      Form  top_of_page
    Your own company logo can go here if it has been saved (OAOR)
    If the logo is larger than the size of the headings in gt_page,
    the window will not show full logo and will have a scroll bar. Thus,
    it is a good idea to have a standard ALV header if you are going to
    use logos in your top of page.
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = gt_page
          i_logo             = 'ENJOYSAP_LOGO'.
    ENDFORM.                    "top_of_page
    *&      Form  build_fieldcat
    *Many and varied fields are available here. Have a look at documentation
    *for FM REUSE_ALV_LIST_DISPLAY and REUSE_ALV_FIELDCATALOG_MERGE
    FORM build_fieldcat.
      w_fieldcat-fieldname  = 'BUDAT'.
      w_fieldcat-seltext_m  = 'Dte pst'.
      w_fieldcat-ddictxt(1) = 'M'.
      w_fieldcat-edit = 'x'.
    Can change the position of fields if you do not want them in order
    of the DDIC or itab
    w_fieldcat-row_pos = '1'.
    w_fieldcat-col_pos = '10'.
      APPEND w_fieldcat TO gt_fieldcat.
      CLEAR w_fieldcat.
    ENDFORM.                    " build_fieldcat
    *&      Form  build_page_header
          gt_page is used in top of page (ALV subroutine - NOT event)
          *H = Header, S = Selection, A = Action
    FORM build_page_header.
    For Headers, Key is not printed and is irrelevant. Will not cause
    a syntax error, but is not used.
      gs_page-typ  = 'H'.
      gs_page-info = 'Header 1'.
      APPEND gs_page TO gt_page.
      gs_page-typ  = 'H'.
      gs_page-info = 'Header 2'.
      APPEND gs_page TO gt_page.
    For Selections, the Key is printed (bold). It can be anything up to 20
    bytes. It gets printed in order of code here, not by key value.
      gs_page-typ  = 'S'.
      gs_page-key  = 'And the winner is:'.
      gs_page-info = 'Selection 1'.
      APPEND gs_page TO gt_page.
      gs_page-typ  = 'S'.
      gs_page-key  = 'Runner up:'.
      gs_page-info = 'Selection 2'.
      APPEND gs_page TO gt_page.
    For Action, Key is also irrelevant.
      gs_page-typ  = 'A'.
      gs_page-info = 'Action goes here'.
      APPEND gs_page TO gt_page.
    ENDFORM.                    " build_page_header
    <b>Reward if useful</b>

  • How to avoid multiple Header(TOP-OF-PAGE) because of page break

    Hi All,
    I am working with a classical report in which we are getting multiple header because of page break.
    can we get a single header, in other words can we trigger TOP-OF-PAGE event only once not every
    time when a page break occurs.
    Regards
    Manish

    use TOP_OF_LIST Event Instead of TOP_OF_PAGE.
    Sandip Sonar.

  • How to use the Observer when a page loads

    Anybody know how to use the
    Spry.Utils.addClassName('DivName','selected') and then fire the
    Spry.Utils.addClassName with onLoad?
    I am loading a page with the selector utils in it into a div
    and then I think I must need an Observer to get the
    Spry.Utils.addClassName to work when this page loads in a div.
    Any help would be greatly appreciated.
    Thank you,
    Bisser.

    I added Spry.Utils.addClassName('DivName','selected') in the
    Script after the constructor and after the effects and it works
    fine. Thank you for your help to get me going.
    Well after the fact, this solution was a problem because it
    loads the selector each time I loaded the file.
    kinblas had the correct answer that I was looking for.... as
    it loads the selector as a 3rd argument.
    ie:
    Spry.Utils.updateContent('mainDIV','/menu.php', function() {
    Spry.Utils.addClassName('DivName','selected'); });
    Thanks to both of you for your continued support.
    Bisser.

  • How to hide business process stage on page load in crm 2013

    Please tell me how to hide process stage on page load in crm 2013.
    for example: Develop, Propose,Quotation... these are business process stages and I have a custom field named "type"
    If type value =1 then hide Propose stage

    Hello,
    That is not possible. What I would suggest is to create several processes for same entity and switch between them using plugin. Sample code for it -
    https://deepakexploring.wordpress.com/tag/updating-process-id-in-crm-2013/
    Dynamics CRM MVP/ Technical Evangelist at
    SlickData LLC
    My blog

  • How to set the bind variable on page load and execute query ?

    Hi All,
    I am using Jdeveloper 11.1.1.5
    I have a table called "Employee"
    Columns :- id , name , location
    Data :- 1, ,james , chicago
    2 ,Raj ,capetown
    Now i have another webservice(created as a webservice dataControl) which sends me the "id" on each time my page loads.Now the id which has been returned by webservice should be incorporated in my VO Query as in where clause to fetch the data for the respective "id" in that "Employee" table and should be rendered on form.
    Eg :- Id "2" has been sent by the webservice then the record should be fetched from database should be "2","raj","capetown".
    I know that there would be necessity of bind variable , but how do i set the bind variable on page load ?
    How can i use the bind variable appropriately ??
    Please suggest !!!!
    Thanks.

    Hi,
    Check
    http://www.orastudy.com/oradoc/selfstu/fusion/web.1111/b31974/web_services.htm#CJADCDBG
    http://thepeninsulasedge.com/frank_nimphius/2011/02/18/adf-code-corner-sample-73-released-hands-on-creating-a-search-form-using-a-pojo-ws-and-the-web-service-data-control/
    -Suresh

  • How to Auto Select some RadioButton on page load using ADF/JSF

    Hi,
    I am learning ADF and need some help. I have multiple radio buttons and couple of text boxes on my page. How can I make some radio button be selected based on some value from a database table and also populate the text boxes with the corrosponding value when a page loads. Any tips on how it can be done using ADF. Any sample tutorial will be helpful.
    Thanks

    Hi,
    when you e.g. use ADF BC then the radio button should be selected automatically based on the value of the attribute. If the row is new then you can have a default value specified in the ADF BC ViewObject attribute.
    However, if you just dragged the radio button and checkboxes onto the page - not using any ADF binding - then you will have to create a managed bean with a field variable (incl. setter/getter methods) to link the radio button's value property to it using Expression Language
    Frank

  • APEX dynamic action - How to hide an item after the page loads

    Hello
    I have a form  with  item  Type,  lesson and page.   I want to create a  dynamic action like "on page load" if Type = x then don't show lesson and page items. .
    How do I say if Type=x then  don't show lesson and page. otherwise show them.
    Please note Dynamic action,  Event=Page load
    Thanks

    create dynamic action like
    Event:Change
    Selection Type:Item
    Item:Type
    Condition:Equal To
    value:X
    Select Action:Hide
    Select Items to hide
    also create opposite false action
    and click on page checkbox below action to yes
    Hope this may helps
    pars.

  • How to execute a view object on page load

    Hi
    I have got two pages, one is login page and the other is search page.
    When ever the user who has logged in, navigates to the search page,
    following events should occur.
    1) a view object should get executed. This view object should check whether there is a default search for the user who has logged in( the check is made based on a boolean variable). This particular view object has got a bind variable.
    a) logged in user.
    Based on who ever has logged in, the bind variable should be set as the logged in user and all the attributes concerning the default search for the logged in user must be populated in select input text components in the search page. ( there are certain select input text components in the search page).
    If there is no default search for the logged in user, then the search page should open up, but without any values populated in the select input text component.
    Please let me know if i am not clear with my question.
    My ultimate aim is to execute a view object on page load for which the bind variable is set as the logged in user.

    actually, your requirement isn't exactly to execute a view object on "a" page load, as in ageneric page load, that would be little more intensive , with you requiring an invokeAction in your page bindings etc.
    Yours, i presume is a simple case wherein if you link your login command button at the initial screen to a method in your managed bean, should do the trick. Within the managed bean method code ,
    get the username ( which you can probably store on the request at time of login) ,
    get hold of your view object,
    set the bind variable ,
    execute the query on the VO ,
    return an appropriate string outcome , which is handled by your faces context navigation rules.
    Fairly straightforward procedure, unless there's something extra you want to do apart from just that.
    K

  • When using letter DIN5008-A how can i start on top of page 2?

    Hello,
    i use the draft letter DIN5008-A which comes with pages. On page 1 there is space for the adress of the recipient and so on.
    on page to the pages starts 8 cm deeper because it has the same format like page one.
    i would like to start on top page page 2. how i set this up?
    thanks
    martin

    Hi Peter,
    set the margin to the top for all pages and on the first page use an empty Textbox or transparent Shape with Textwrap to push the starting text down.
    Brilliant!
    Document Panel > Document > Document Margins > Top > 2.5 cm
    (Menu > View > Show Layout for clarity.
    Text Boxes shown with Borders for clarity).
    And Page 2:
    Regards,
    Ian.

  • How to quickly go to top of page or end of page

    i hve looked everywhere but cant find the answer. pls help.
    when the web pages are lengthy, i cant go to top or end of page instantly.
    thanks

    That feature does not exist.

  • JEditorPnae setCaretPosition ? how to place position on top of page

    Hi,
    i am new to here ,
    sorry if i violate anything.. anything.
    we are making a multimedia cd with swing.
    we show content in a JEditorPane . we paste a html document with paragraphs with known id"s
    15,16,17,18... for example:
    i want to place the caret( or make visible a paragraph)
    Element text=doc.getElement(String.valueOf(paragraphId));
    aJEditorPane.setCaretPosition(text.getStartOffset());
    but this shows the paragraph at the end of visible area. But i want this to be seen at begining of page...
    is it clear or i have talked so much? i do not known. Think u are searchinfg with
    ctrl + F
    when u hit enter resuly seems at bottom.
    ok. thanks for helps..

    You need to scroll the viewport to the top of the scroll pane. You would do something like:
    Rectangle r = textComponent.modelToView( text.getStartOffset() );
    textComponent.scrollRectToVisible( r );

Maybe you are looking for

  • How to make use of a Badi in dynamic action on infotype?

    Hi... i need to create a dynamic action on infotype 6 to create a record in infotype 207. I have to use badi for it. i need to use 'f' for 'Indicator for step'. right? kindly help.. Thnx and regards. Abhi.

  • Converting from word to pdf

    When converting from a Word doc to a pdf using joboptions file settings, the layout changes - text is moved up as if the bottom margin is decreased.  This is a problem when the heading on a new page is moved to bottom of the previous page.  Please he

  • Golive: Troubling drop shadow on text.

    When viewing a Golive web page in Safari, or even an old IE browser, some type (which I assigned a color to) looks fine, but in Firefox, a drop shadow of the same color is being created. I see nothing that could possibly cause this. Any thoughts?

  • Workaround: 16-bit installers in Vista

    If some of you have some legacy programs you like to use that used to work in XP but don't install in Vista, here's a tip.  The installer for your program may be 16-bit and Vista is an all 32-bit OS.  There are many programs that have 16-bit installe

  • Making my MX860 fax work with OOMA Linx on dedicated number

    My Canon MX860 fax will not fax send or receive through the OOMA Linx.  Fax has dedicated number and direct line to Linx.  When we changed to OOMA Telo fax would not send or receive, it did at first then quit, so when Linx came out it was touted as a