How do we display ALV in Search Help exit

Plz help out !!

You have to program the exit properly to return the value to the field to which the search help is attached. Refer to the following link to find out how to do this: [http://help.sap.com/saphelp_nw70/helpdata/EN/cf/21ee52446011d189700000e8322d00/frameset.htm]
regards,
John.

Similar Messages

  • How to code my logic in Search Help Exit

    Hi,
    I need to add my own Search Help say MATOG in Material MATNR Collective Search Help MAT1-> Collective Search help MAT1_A.
    Is it possible?
    And , when I need to add my own logic in Search Help exit for my particular Search Help, how should I code?
    Thanks,
    Shivaa..

    Hi,
    Go through below link, it gives you step by step approach in implementing search help exit.
    https://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits
    Regards,
    Raghavendra

  • ALV in Search Help

    Hello ppl,
    I have requirement wherein I need to provide an ALV display in a search help for a Selection Screen Field, kindly let me know if this is possible.
    If yes the method in brief.
    Will we need to use a exit in this case?

    Nonconformist Pagal 
    You can achieve a out put in search help by passing all the required fields into a itab and pass the itab to the function module 'F4IF_INT_TABLE_VALUE_REQUEST'.
    For instance check the following code to get the F4 help in select options for G/L Account. Here i am passing the itab IT_HKONT for the field HKONT.  You define the structure and fill the itab with required fields and data. The structure of the itab will be populated in Search Help for that field.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR HKONT-LOW.
    SELECT KSTAR KTEXT INTO TABLE IT_HKONT FROM CSKU WHERE SPRAS EQ 'EN'.
    SORT IT_HKONT BY KSTAR.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    RETFIELD = 'HKONT'
    VALUE_ORG = 'S'
    TABLES
    VALUE_TAB = IT_HKONT
    RETURN_TAB = IT_RETURN.
    IF SY-SUBRC = 0.
    READ TABLE IT_RETURN INDEX 1.
    MOVE IT_RETURN-FIELDVAL TO HKONT-LOW.
    ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR HKONT-HIGH.
    SELECT KSTAR KTEXT INTO TABLE IT_HKONT FROM CSKU WHERE SPRAS EQ 'EN'.
    SORT IT_HKONT BY KSTAR.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    RETFIELD = 'HKONT'
    VALUE_ORG = 'S'
    TABLES
    VALUE_TAB = IT_HKONT
    RETURN_TAB = IT_RETURN.
    IF SY-SUBRC = 0.
    READ TABLE IT_RETURN INDEX 1.
    MOVE IT_RETURN-FIELDVAL TO HKONT-HIGH.
    ENDIF.
    Reward Points if useful.

  • Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Hello,
    this topic is still a problem for me, does anybody have an idea.
    Just to show what's my problem:
    Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
    The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
    That works, the SH's are not shown anymore.
    I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
    All this can be done modification free by appends.
    The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
    This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
    But I have not found any way to do this modification free.
    The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
    But I want avoid this modification.
    So, is there any way to do this without modifing any of the original SAP SH's ?
    Helmut Fischer

  • How can we create a Collective search help

    Hi all sap experts,
    How can we create a Collective search help on field “OBJECT” which allows to search tables
    o   ARCH_OBJ
    o   TOJTB (Search help: H_TOJTB)
    on 2 tabs.
    Thanks,
    Basu

    Hi
    1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
    2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
    3)An elementary search help defines the standard flow of an input help.
    4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
    5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
    6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
    CREATION:
    Go to SE11  Tcode
    select search help
    give the 'z' search help name and create
    select the selection method ur table name eg : 'mara'
    dialog module 'display value immediately'.
    add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
    where left position when displaying and spos = search position
    and then save and activate ..
    See the links:
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
    pls go through this for search help creation
    http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
    Search Help Exits:
    Re: dynamic values for search help
    Re: Dynamic search  help
    Reward points for useful Answers
    Regards
    Anji

  • How can we create a Collective search help  plz tell me with steps

    How can we create a Collective search help  plz tell me with steps
    thanks,
    basu

    Hi
    1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
    2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
    3)An elementary search help defines the standard flow of an input help.
    4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
    5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
    6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
    CREATION:
    Go to SE11  Tcode
    select search help
    give the 'z' search help name and create
    select the selection method ur table name eg : 'mara'
    dialog module 'display value immediately'.
    add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
    where left position when displaying and spos = search position
    and then save and activate ..
    See the links:
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
    pls go through this for search help creation
    http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
    Search Help Exits:
    Re: dynamic values for search help
    Re: Dynamic search  help
    Reward points for useful Answers
    Regards
    Anji

  • Populate and display internal table results using search help exit...

    I have copied F4IF_SHLP_EXIT_EXAMPLE and made changes. I want this search help exit to populate and display contents related to 'FIELD1' when the user enters a specific value for it in the search help screen, meaning when the user restricts the search by that value.  For field2, field3, field4, field5, field6, field7, and field8 I am using a custom view.
    Following is the code:
    TYPES:  BEGIN OF t_search,
                   field2 TYPE field2,
                   field3 TYPE field3,
                   field4 TYPE field4,
                   field5 TYPE field5,
                   field6 TYPE field6,
                   field7 TYPE field7,
                   field8 TYPE field8,
                   field1 TYPE field1,
                END OF t_search.
      DATA: it_itab TYPE TABLE OF t_search,
            wa TYPE t_search,
         wa_selopt TYPE ddshselopt,
            wa_fielddescr TYPE dfies.
    ranges: r_field1 for std_table1-field1
    STEP SELECT    (Select values)
        FREE: r_field1.
    **Get the value entered for FIELD1 in search help
        LOOP AT shlp-selopt INTO wa_selopt.
          CASE wa_selopt-shlpfield.
            WHEN 'FIELD1'.
              r_field1-sign = wa_selopt-sign.
              r_field1-option = wa_selopt-option.
              r_field1-low = wa_selopt-low.
              r_field1-high = wa_selopt-high.
              APPEND r_field1.
              CLEAR: r_field1.
          ENDCASE.
        ENDLOOP.
    **Select 'ID' and 'FIELD1' from table into lt_itab
        SELECT id field1
              INTO TABLE lt_itab
                FROM std_table1
                  WHERE field1 IN r_field1.
        IF sy-subrc = 0.
    **Now, based on the particular IDs from lt_itab, I need to select other values
    from other tables which also have 'ID' as the key.
           SELECT std_table2~field2
                std_table2~field3
                std_table3~field4
                std_table3~field5
                std_table3~field6
                std_table4~field7
                std_table4~field8
                std_table1~field1
              INTO CORRESPONDING FIELDS OF TABLE it_itab
              FROM std_table2
                         INNER JOIN std_table3 ON
                                std_table3mandt = std_table2mandt AND
                                std_table3id = std_table2id
                         INNER JOIN std_table4 ON
                                std_table4mandt = std_table2mandt AND
                                std_table4id = std_table2id
                         INNER JOIN std_table1 ON
                                std_table1mandt = std_table2mandt AND                                           std_table1id = std_table2id
              WHERE
                    std_table1~field1 IN r_field1.
    'id' is common in all the std_tables --> std_table1, std_table2, std_table3, std_table4.
    STEP DISP     (Display values)
    **Then I need to gather all the results in my internal table it_itab and display
    in search help results for the value of FIELD1 entered by the user in the search help.
        CALL FUNCTION 'F4UT_PARAMETER_RESULTS_PUT'
          EXPORTING
            parameter   = 'FIELD1'
            fieldname   = 'FIELD1'                          
          TABLES
            shlp_tab    = shlp_tab                                   
            record_tab  = record_tab
            source_tab  = it_itab
          CHANGING
            shlp        = shlp
            callcontrol = callcontrol.
    I am not getting all the data in my internal table and wanted to know if there is anyting wrong in my select statement.
    Any guidance will be appreciated and awarded appropriate points.
    Thanks.

    the webdynpro fieldname and the search help input parameter name were made same.

  • How to replace a field's search help of DDIC in FPM feeder class?

    Hi All,
    I want to replace a field's search help in DDIC structure, for an example, in structure HCMT_BSP_PA_XX_R0009, the field BANKL(Bank Keys) has a search help named 'H_BANKL', I want to replace this search help with other one such as 'H_BANKEY' in the FPM feeder class CL_HRESS_PER_DETAIL, I redefined such method:
    method if_fpm_guibb_form~get_definition.
    field-symbols: <fs_field_description> like line of et_field_description.
    call method super->if_fpm_guibb_form~get_definition
    importing
    es_message = es_message
    eo_field_catalog = eo_field_catalog
    et_field_description = et_field_description
    et_action_definition = et_action_definition
    et_special_groups = et_special_groups
    ev_additional_error_info = ev_additional_error_info.
    read table et_field_description assigning <fs_field_description> with key name = 'BANKL'.
    set search help name of field 'bank key'
    if <fs_field_description> is assigned.
    <fs_field_description>-ddic_shlp_name = 'H_BANKEY'
    endif.
    endmethod.
    I test it and found the search help window was replaced indeed, but all the value of import/export parameters in the new search help was lost, it means, the value of import paramer BANKS(Bank country) and the export parameter BANKA(bank name) were lost. Only the value of BANKL itself can be returned by the new search help window. Can you give me some suggestions about how to maintain the link( value exchange) between structure HCMT_BSP_PA_XX_R0009 and dynamically defined search help 'H_BANKEY' in FPM feeder class?
    I tried to use sap memory ID but it doesn't works well.

    This question was answered at [Webdynpro Forum|how to replace a field's search help of DDIC in FPM feeder class?;:
    That is because for the import and export of DDIC Search help values to work in WDA, not in FPM layer.Feeder Class can do nothing about it.

  • How to concatenate fields in Search help exit

    Hi,
    My requirement is i have to create a search help for a field in cj20n transaction.
    when i press f4 on that field i should get a popup of 4 fields from custom table,when user selects any 1 row,
    first 3 field values should be concatenated and appear in screen field . in search hlp i added 1 more field so that i can concatenate
    all 3 field values and place in it.I can use  search help exit so i can concatenate but there are steps like selone,presel etc i am not able to understand .
    I saw some examples in wiki, but not able to understand what to do for my requirement.
    regards.
    Edited by: vnamamala on May 27, 2010 12:22 PM

    You would use the step 'SELECT' to control the data selection into an internal table.  You would use the step 'DISP' to map the records in the internal table to the search help record table.  In your case, I would already have a field in the internal table with the values concatenated together prior to the hit list display (do this in SELECT step) which is not displayed in the hit list but is flagged as the EXPORT field in the search help definition; otherwise just put the field at the end of the hit list. 
    Map your results in DISP as follows:
    *   Map the internal table to RECORD_TAB
        CALL FUNCTION 'F4UT_RESULTS_MAP'
             TABLES
                  SHLP_TAB          = SHLP_TAB
                  RECORD_TAB        = RECORD_TAB
                  SOURCE_TAB        = GT_DOCUMENT
             CHANGING
                  SHLP              = SHLP
                  CALLCONTROL       = CALLCONTROL
             EXCEPTIONS
                  ILLEGAL_STRUCTURE = 1
                  OTHERS            = 2.
        CALL FUNCTION 'F4UT_OPTIMIZE_COLWIDTH'
             TABLES
                  SHLP_TAB    = SHLP_TAB
                  RECORD_TAB  = RECORD_TAB
             CHANGING
                  SHLP        = SHLP
                  CALLCONTROL = CALLCONTROL.

  • How to implement the search help exit to MM01 for Material by product hiera

    Hi,
    How to implement the search help exit to MM01 T-code for Material by product hierarchy,
    but system default it gives the data from MVKE table, my client wants from MARA table,
    i created the one Function Module, write this code in that FM.
    IF CALLCONTROL-STEP EQ 'DISP'.
    REFRESH RECORD_TAB.
    SELECT * FROM MARA INTO TABLE RECORD_TAB
    WHERE PRDHA = 
    ENDIF.
    I Face the problem what variable i have to pass in WHERE CONDITION, FROM THE MM01 T-code.
    is't require to IMPORT variable from MM01 program, what is that import variable, please give me the solution.
    thanks to all.

    Hi there..
    check my web blog on search help exit...
    [Search help exit code|https://wiki.sdn.sap.com/wiki/x/du0]

  • How to have radio button in search help ?

    Hi,
    I have a requirement in which on pressing F4 the user will input value of a document number on displayed search help screen. I need to provide two radio buttons there based on selection of which i will determine the values in my search help exit.
    To clarify more, i am in CRM system and user runs a transaction crmd_order but he doesn't know the contract document number to open. He knows a sales document reference number so he presses for F4 help where he can input the sales document reference number to get available contracts. Now when he/she enters the dsles document number they need to choose which kind of contract should be displayed ( Two kind of contracts : proposal and schedule ). Based on user input i will search in help exit and display the output.
    Any help would be appreciated.
    Regards
    Apoora

    Hi Apoorva,
    i think you can write below code just to show the Pop-up for details.
    this you can write on POV or at selection screen-output.. when ever the user changes the Radio button the logic will be triggered and pop-up is triggered..
      CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
        EXPORTING
          i_title               = 'Batch Number Selection'           "Pou-up Heading..
          i_selection           = 'X'
          i_screen_start_column = 5
          i_screen_start_line   = 5
          i_screen_end_column   = 50
          i_screen_end_line     = 20
          i_tabname             = 'T_BATCH'                  "Internal Tbale
          it_fieldcat           = gt_fieldcat_drd[]
        IMPORTING
          es_selfield           = gc_selfield
        TABLES
          t_outtab              = t_batch                       "Internal Tables with Valuess
        EXCEPTIONS
          program_error         = 1
          OTHERS                = 2.
      IF sy-subrc <> 0.
      ENDIF.
    regards,
    Prabhudas

  • Can somebody help me on how to create Search help exit?

    I have requirement where in i have to use search help exit in search help .Based on the value in the GET parameter id i have to extract the value in the search help can somebody help me in this.

    HI
    In order to offer a meaningful input help for as many screen fields as possible, the R/3 System uses a number of mechanisms. If there is more than one such mechanism available for a field, the one that is furthest left or at the top of the above hierarchy is used.
    In addition to the options described above for defining the input help of a field in the ABAP Dictionary, you can also define it in the screen field. The disadvantage, however, is that there is no automatic reuse.
    With the screen event POV, you can program the input help of a field by yourself. You can adjust the design of the help to the standard help using the function modules F4IF_FIELD_VALUE_REQUEST or F4IF_INT_TABLE_VALUE_REQUEST. However, you should check to see if the part of the input help that you programmed yourself should be implemented as a search help exit instead (see Appendix).
    You can also attach a search help to a screen field in the Screen Painter (Module Pool programming). There are some functional restrictions on this kind of attachment as compared with attachment in the Dictionary.
    You should no longer use the input checks defined directly in the flow logic of the screen, from which it is also possible to derive input helps.
    The function Technical info is offered in the hit list in the menu of the right mouse key. It can be used to find out which of the specified mechanisms is being used.
    Check these links
    Search Help Exits:
    Re: dynamic values for search help
    Re: Dynamic search  help
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
    http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
    https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
    check out this link, it gives step by step example of implementing search help exit.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/implementing%2bsearch%2bhelp%2bexits

  • How can I call a specific search help from and still get all the tabs

    hello
    I use F4IF_FIELD_VALUE_REQUEST to display a specific search help from my program. This search help is included in a collective search help, but only the one specified search help is displayed.
    Is it possible to call the collective search help and display one specific search help ?
    Example: in CRM i have a collective search help BUPA. When F4 is issued from a customer field the search help "Search customer" should be displayed, and not the last search help which was activated - i.e.. "Search employee".
    best regards
    Peter Christiansen

    Hi,
    you can try some thing like this..
          CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
            EXPORTING
              TABNAME           = 'KNA1'
              FIELDNAME         = 'KUNNR'
              SEARCHHELP        = 'DEBI'
            TABLES
              RETURN_TAB        = LT_RETURN
            EXCEPTIONS
              FIELD_NOT_FOUND   = 1
              NO_HELP_FOR_FIELD = 2
              INCONSISTENT_HELP = 3
              NO_VALUES_FOUND   = 4
              OTHERS            = 5.
          IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    Regards
    vijay

  • How to create Search help exit, and then assign it to a collective search

    hi gurus,
    i have an intersting question for you, well my scenario is like i have to create a search help exit using some function module cause i didt found table for my search help but i can find the value through FM, i know we can create a search help exit and then assign it to collective search help,
      my problem is what are the parameters i need to pass to this search help exit FM, and in the function module i want to use the value entered on the f4 selection screen to extract data through FM. i need to give a solution  asap.
    any reply will be highly appreciated
    n rewards points for sure.
    thanks mandy

    Hi mandy,
    Have a look at this code,
    FUNCTION SHLP_SHOW_LIST.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(PLANT) TYPE  WERKS_D OPTIONAL
    *"     VALUE(DISPLAY_ONLY) TYPE  FLAG OPTIONAL
    *"  EXPORTING
    *"     REFERENCE(ITEM_SELECTED) TYPE  CHAR20
    *"  EXCEPTIONS
    *"      POPUP_CANCELED
    TYPE-POOLS SHLP .
    CONSTANTS:
            co_shlpname            TYPE shlpname   VALUE 'SHLP_CONTAINER',
            co_shlpfield_itemalias TYPE ddshlpsfld VALUE 'CONTAINER'.
      DATA: l_shlp         TYPE shlp_descr_t,
            l_subrc        TYPE sysubrc,
            l_return_tab   TYPE STANDARD TABLE OF ddshretval,
            l_return_wa    TYPE ddshretval,
            l_interface_wa TYPE ddshiface.
    Get details for search help
      CLEAR l_shlp.
      l_shlp-shlpname  = co_shlpname.
      l_shlp-shlptype  = 'SH'.
      CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
           CHANGING
                shlp = l_shlp.
    Assign virtual screen field
      READ TABLE l_shlp-interface INTO l_interface_wa
      WITH KEY shlpfield = co_shlpfield_itemalias.
      l_interface_wa-value      = space.
      l_interface_wa-valtabname = 'X2'.    "virtuel screen field
      l_interface_wa-valfield   = 'Y2'.    "virtuel screen field
      MODIFY l_shlp-interface FROM l_interface_wa INDEX sy-tabix.
    Call F4 popup
      CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
           EXPORTING
                shlp          = l_shlp
                disponly      = display_only
           IMPORTING
                rc            = l_subrc
           TABLES
                return_values = l_return_tab
           EXCEPTIONS
                OTHERS        = 0.
      IF sy-subrc = 0 AND l_subrc = 0.
      Value selected
        READ TABLE l_return_tab INDEX 1 INTO l_return_wa.
        item_selected = l_return_wa-fieldval.
      ELSE.
      Popup canceled / no value selected
        RAISE popup_canceled.
      ENDIF.
    ENDFUNCTION.
    make sure to call these FMs and populate accordingly...
    Thanks
    Madhu

  • Search Help Exit in Modal Display of Search Help

    I have created a new search help within the collective search help kred (Vendors/Creditors).  The new search help shows up in FK01,2,3 as a separate tab and uses value restriction.  Furthermore, I have written a Search Help Exit for it.  THE PROBLEM:  Everything works fine when in Control(amodal) mode (menu path: help -> settings -> F4 help), but has a problem when in Dialog(modal) mode.  The Filter button produces a blank dialog box when selected.  Callcontrol-step is PRESEL after the button is selected, do I need to use some function module for this callcontrol-step in the exit to get Filter functionality?
    Message was edited by: Jason DeLuca

    closed

Maybe you are looking for