How do we make variants

hi gurus
how do we make variants?

it really depends on what variant u r creating.
like for example ur clinet says that whenever he willbe running transaction me2m the material code 4500 should come by default.
what u will do is run me2m,here give 4500 as the material code and select GOTO in the menubar.in it u will find variants and further u will find save variants.
regards,
indranil

Similar Messages

How to Make Variant as a default?

Hi,
      How to make Variants as a default variant for reports like Layouts?
and   how to make Scope of list   :     ALV -> grid control as default in ME55 ( Collective release of Purchase requisitions )
like ME28 ( Release Purchase Documents ) .   We have   scope of list is ALV as default in ME28.
Thanks in Advance.
Regards,
Aruna.

Check
Variant as default

MMPV - Close period - How to create a variant

Hello all,
Transaction MMPV is used to close the MM period and open a new one. Currently, we run this transaction every month MANUALLY.
We would like to create a variant that will open the new period automatically every month. The only problem is the period / year that changes every month (I do not know how to create a variant with changed values - if it is at all possible).
How can we create a variant that will run every month to close the MM period ?
Thanks for your help,
Isaac

Hello Isaac
It is possible......But to make it happen you need to go with date field and not with Period and year.
Steps -
1 - Enter field FROM Comp Code and TO Comp Code
2 - Enter the date (E.g - 05-Mar-2007)
3 - Save as varient....Give the varient names as required.
4 - Activate the 4th checkbox (Selection variable) in front of date field
5 - Click on button 'Selection variable' at the top of screen.
6 - Click on YELLOW light. This will turn it GREEN. Now you have 1st light as YELLO which was previously yello.
7 - Click on the down arrow just below the yello light.
8 - Select the appropriate option and save the varient.
The day of batch job scheduling depends upon the options you selected in the 8th step.
I hope it clarifies your dought and will allow you to create the varient as per your requirement.
Best Regards
Avinash

How to create a variant for a selection screen button

hi ,
      i have created a selection screen for a normal report .
In the selection screen there is one button after the selct option for company code. when user enters some company code and presses the button the user i call a able contraol in which user gives some additional values for the comapny code.
how do i create variant. when i create varaint for the slection screen it does not take into account the other screen i called .
so every time user has to click that button and enter some values and execute. please suggest some way.
THANKX IN ADAVANCE:)

Hi,
      Inorder to create a variant for selection screen report, you need to enter valid data on the screen and click on the SAVE button which is available in the Menu.
      And regarding the button you were asking about after select option, it is not created manually it comes automatically,, you can remove this by mentioning no-extension after the select-option. You can get clear information of this if you do F1 help on select-option.
My advice to you, make effect use of F1 help.
Edited by: Madhuri on Sep 23, 2008 4:46 PM

How to create a variant in ecatt?

Hi all,
I am new to Ecatt scripting. I hav a requirement from the user, that one ecatt is used for two sales org using two variants.
I recorded as per the requirement ( first i created one basic script and called it in a master script ). Now I need to create two variants for the master script for the sales org.
So could any one suggest how to create a variant in ecatt?
Thanks in advance.
Vijayakumar.G

Hello Vijay,
After recording parameterize everything whatever you want.
In parameterization table leave the value field as empty, I mean don't give any value.
Select the following in the menu,
Utilities>Test configuration>Create
Now, test configuration name will have the same of the test script name.
Provide the details in the configuration tab. Then in the variants tab select the second radio button "Internal variants".
In the variant table you can see the default variant "ECATTDEFAULT". You can make use of this also. Otherwise you can also create your own variants by clicking "Insert variant" button.
The variables whatever you have created in the test script will be there in the table. Now, Create variant and provide values for each variables.
You can also select the variants which need to be executed.
Now you can run the test configuration. It will be running number of times according to the created number of the variants.
You can also create Test data for your test script and configuration.
Try this, I hope it will help.
Feel free to reward if it helps.
Regards,
Gopi
Edited by: Gopinath K S on Oct 7, 2008 7:37 AM

How to create a variant selection screen

Hi experts,
Can you tell me " How to create a variant selection screen ".
Please it's urgent.........
Thanks
Basu

Hi ,
Goto your selection screen
Make entries in the fileds od the selection screen
press save button, it will ask you for the mane of the Variant
Give the name of the Variant and save it
Variant is now created for the selection screen.
Reward if useful.
Regards,
Shilpi

How can I make settlement rule mandatory in create work order (IW31)

How can I make settlement rule mandatory in create workorder and saving without release.
I kanow we can make settlement rule mandatory upon Release order but here requirement is
Create work order (IW21) save without releasing that time settlement rule should default.

Hi,
1.If you want the settlement rule default then maintain account assignment data in technical object and when MO is created on that it would be copied into the settlement rule...
2. If you want to make those fields mandatory .... plz check up field selections in config , if you cannot find those then use SHD0 Transaction variant to make those fields mandatory.
3. Enter SHD0 , Enter IW31 in transaction and ZIW31 for transaction variant ..click create option and this takes you to IW31 initial screen , here enter required values of technical object etc and press enter and this gives you IW31 Initial scree screen variant , click continue and this takes you to inside screen and here enter required field values and on pressing enter gives you screen variant .. so you need to enter field values and check the flow of screen variants and on getting settlement rule screen variant select required option for the fields you need.
4. Finally you can save that in package created in SE80 for transporting to other client .., you can activate the variant in SHD0 -->Standard variants -->you can find activate option ..
regrds
pushpa

How can I create variant of control query?

Dear Expert,
I am using BEx Broadcaster to bradcast query as a report.
In tab Filter Navigation, I enter the control query, but the variant always gives me "(No Selection Possible)".
How can I create variant of control query?
I try to create variant via variable entry page when I excute my query.
The variable show in table "RSRPARAMETRIZA" but not show in BEx Braodcaster.
Thank you,
Zilla

Hello,
Please run this control query on the portal and then save variant you require. If you want this variant to be available
to all users make sure that the user specific flag is unchecked while saving the variant.
Regards,
Michael

How can i make a field mandatory in SO header .

Dear expart
How can i make Customer group mandatory in SO header data.Under sales tab pricing and static.
Plz give me spro or the direct transaction code if any.
Yeasin

Hi Yeasin,
There are three ways.
1) By using incompletion procedure by using OVA2 T.Code which is already discussed by Raja.After this assign this incompletion procudere to your document type in VOV8 and also check the box incompletion messages.
2)By using SHD0 T.Code.
Goto SHD0 T.Code.
Enter the transaction code as "VA01".
Select the transaction variant as "BUS2032".
Two programs will appear .Select the last one(BUS2032_4480).Click on details.
Search for the field "VBKD-KDGRP" using "CTRL+F".
Against that field tick the mark Required.
Save.
3) By using SE51 T.Code.
Enter the program name as "SAPMV45A" and screen number as "4301".
Select Layout editor.
Click on Change.
The screen layout will be opened.
Select the field "Customer group" and double clik on it.
Attributes screen will be opened.
Goto Program tab and for the Input field,tick this and for input select the option required from the dropdown.
Save.
Now If you then you can find it as mandatory.Among these three you can use any one.
Regards,
Krishna.

An index of my desktop files appears in firefox. why is it there? does this mean my personal files are accessible from the internet? how can i make sure this goes away and stops?

i am seeing and index of my personal files on firefox. what is this? why is it there? how can i make it go away? does this mean my desktop files are on the internet? can someone explain clearly and simply (i am not tech saavy at all) thank you

This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 
Helvetica Neue abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page. 
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps

How can i make my object appear as a mesh?

How can I make an object appear as a mesh? I dont want anything as complicated as a coloured gradient I just want a flat object to appear like a net. Is there an easy way to do this?
Thanks
J

Jules,
Depending on the shape, and upon the appearance (varying width and/or knotting or whatever), it may be anything from a Rectangular/Polar Grid (bundled with the Line Segment Tool) to something intricate and difficult.

How do I make one account's home folder visible to the other?

How do I make one account's home folder visible to the other? Also, when I begin to delete an account, it asks if I want to either delete its home folder, keep it in the users folder, or save it in a disk image. I want to be able to see it from my remaining account once I delete it, so if I leave it in the users folder, would I be able to see all the files (right now I can't

Use terminal to add ACL to the account,
at the prompt:
sudo chmod -R +a "<user> allow list,addfile,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr, writeextattr,readsecurity,file_inherit,directoryinherit" /User/<user_name> #yep, all that goes on one line!#
#Replace <user> with the user name that you want to have file/folder privileges#
#Replace <user_name> with the account you want to process#
example:
sudo chmod -R +a "sue allow list,add_file, .... deletechild,readsecurity,file_inherit,directoryinherit
/User/joe
#sue now gets full access to joe's files and folders#
to remove:
sudo chmod -R -a "sue allow list,add_file, .... deletechild,readsecurity,file_inherit,directoryinherit
/User/joe
You can add as many users as you want! Just lather, rinse repeat. That is how I share my itunes
directory with the ones I want to share it with.
That's the simplest way. ACL permissions overrule posix permissions.

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

Where are you located?
Just go and buy an iTunes gift card at any store in your country.
Then follow all the steps you did, but when it asks you for the credit card number, there shoujld be a GIFT CARD option which will let you load your account witht eh funds form the gift card without providing a credit/debit card #.

How can i make an iTunes store acount without a credit card?

how can i make an iTunes store acount without a credit card?
im israeli and the israel store is only the app store.
i want to get stuff for free without a credit card.
help?!?

Just go get a prepaid Visa or something. Put a small amount of money on it and then use that to open an account. If that doesnt work just call them. Contacting Apple for Support and Service 1 800 275-2273

How do we make variants

Similar Messages

Maybe you are looking for