How do we record the information in NI-9233

We are using NI - 9233 for the vibration measurement of vibration.
We have a signal input of vibration from a sensor .
We will display the output .
and we need to record the information when the vibration range goes above 20g .
what we want to know is How do we write the program to record the information when it goes high as much as 20g

What you are looking for is analog triggering however the NI 9233 doesn’t support analog triggering.  There are still a few way that you can still accomplish what you.  If you are using the 9233 in a cDAQ chassis and you have access to a 9205 or 9206 (only cDAQ modules that support analog triggering) then you can do exactly what you need.  Have a look at the following knowledge base article that explains the steps and points you to an example program.
If you do not have access to these analog triggering modules, then you must perform the triggering in software.  Basically continually monitor the data being read from the 9233, and then when it reaches the desires value, in your case 20g, start recording the data.  This is not as simple as the analog triggering, nor is it ideal, however it may be what you are looking for.
Have a look at the following DevZone article for a good starting point.
Chris_K
National Instruments
Applications Engineer

Similar Messages

  • Button that always works when Unde the Enter key to record the information?

    Hello everyone,
    How do Oracle Express, a button that always works when Unde the Enter key to record the information
    and every time I write some information that the cursor is placed back into the Text Field item only on my screen
    order to optimize this process
    I appreciate your cooperation and attention ...
    good day ...
    Reynel Martinez Salazar

    Hi,
    First, you should change your text item to a "Text Field (Always submits page when Enter press)" item. This adds a call to the submitEnter() javascript function which will submit the page when you press Enter while in the text field.
    Second, on your page, edit the Page definition. In there is a setting called "Cursor Focus" - set this to "First Item on Page". When the page is loaded, this will put the cursor into the text field.
    Andy

  • How to continously recorded the iput and output wave

    I used NI-FGEN and NI-Scope in Bender element test a.I want to know how to continously recorded the input and output wave. Thanks you so much

    I did a bit more looking and found out that I was wrong. My apologies. NI-HWS is currently shipping with the high-speed digital products and the waveform editors (analog and digital). It is not shipping with NI-FGEN or NI-SCOPE. sfpFile shipped with NI-SCOPE 2.1.2 through 2.5 and NI-FGEN 1.5. NI-HWS was not finished in time for the latest NI-SCOPE and NI-FGEN releases. For now, you will need to use sfpFile. Copy the examples to make your life much easier. Your application is simple enough that the basic functions should work for you. Don't worry about losing your data, since sfpFile and NI-HWS use the same format. In any case, it is all based on HDF5, and you can get HDF5 utilities (free for any use) from the NCSA website. A word of warning - HDF5 is VERY powerful, but also VERY difficult to use. sfpFile and NI-HWS are based on the 1.4.4 release of HDF5. The current 1.6.x release of HDF5 is file format compatible, but binary incompatible with the 1.4.x release. NCSA did not change the format of the files they are writing, but did change the code that writes to them.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

    have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac?  Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

    I think you may find helpful information here:
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC System Preference add-ons
    All Unsanity Haxies Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5 Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data.  This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Transferring files between two computers using FireWire.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

    I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

    First, back up your old iphone manually:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your old phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
    About backups and what's saved: http://support.apple.com/kb/HT1766
    How to back up and restore: http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    After that, connect your new phone and let iTunes set it up. iTunes will detect the old 3G backup and ask you, if you want to use it to restore the info on your new iphone. If you agree, all settings and data will be present after the process is finished.
    This is also explained in this article: http://support.apple.com/kb/HT4137

  • How can i receive the information from a form ?

    I created a form in Dreamweaver CS5 with some input fields and with a send button.
    The question is how can I receive the information that is filled in by the visators.
    Where can I tell to which email adress the information has to be send. Where can I find this in dreamweaver CS5?
    Or what else do I have to do before a form is actually working and I'm receiving the input?
    Already thanks
    Ron

    I'm just starting with building a site
    so thanks for this email
    2010/11/17 DeonH <[email protected]>
    Hi there.
    >
    I don't know what your capabilities are regarding coding. I am no
    programmer and use "Forms to Go" with much success. Take a look here:
    http://bebosoft.com/products/formstogo/overview
    >
    Regards,
    Deon
    >

  • How can I see the information about a file used in a sequence?

    How can I see the information about a file used in a sequence?

    You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
    I use this one: http://www.apple.com/mightymouse/

  • How do I reinstate the information bar that shows the prevention of opening a pop-up window?

    After Firefox opened the information bar telling me they blocked a pop-up window I inadvertently clicked the option link and deleted the information bar from coming up again.
    How do I reinstate the information bar that shows the prevention of opening a pop-up window?
    == This happened ==
    Just once or twice
    == I clicked the option link and selected the "do not show this again" option

    I set browser.popups.showPopupBlocker to false, and information bar still appears.
    When I also set privacy.popups.showBrowserMessage to false, it doesn't appear.
    To test, whether the information bar appears, I use
    [http://www.popuptest.com/popuptest3.html]
    So, set to true preferences
    privacy.popups.showBrowserMessage
    and
    browser.popups.showPopupBlocker
    Both of them!!!
    Does it help you?

  • How can I get the information of current BW system id?

    How can I get the information of current BW system id '0TCTSYSID' or 'LOGSYS'?
    thank your attention!

    Transaction SCC4 will give you the current logical system you are connected to (double click on the current client).
    Regards,
    Fred

  • How can I record the MASTER BUS?

    We use Audition to record programs for airing. I would like to record the output of the effects rack (after applying a limiter, etc). How can I record the output of the Master or other Bus?
    George Weston
    KSFR-FM
    Santa Fe, NM

    You don't actually record it as such - you mix the master output down to a new file, which opens in Edit view where you can save it.
    So in Multitrack view, that's Edit>Mix Down to New File, and select the particular option you want. So if you only want part of a session mixed, then make an appropriate time selection, and select that option.

  • Security questions have incorrect information how do I edit the information?

    Security questions have incorrect information how do I edit the information?

    How to reset your Apple ID security questions.
    Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
    Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
    Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.
    This will generate an automated e-mail that will allow you to reset your security questions.
    If that doesn't work, or  there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
    Next, go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.

  • I just opened my mail, and I don't find absolutely nothing, no message.  The application is empty! how I can retrieve the information?!! do not know what happened

    I just opened my mail, and I don't find absolutely nothing, no message.  The application is empty! how I can retrieve the information?!! do not know what happened

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99460)

  • My iPod Touch has been stolen, someone offers me to make his mine. How can I erase the informations from his iPod and make sure that my library will copy in the new one?

    My iPod Touch has been stolen, someone offers me to make his mine. How can I erase the informations from his iPod and make sure that my library will copy in the new one?

    Restore it as new.
    iPod touch User Guide (For iOS 5.1 Software)

  • EBS field how can we get the information that on which form this filed is

    we are doing some data mapping activity for datawarehousing if we are given some EBS field how can we get the information that on which form this filed is located is there any good method

    Hi Kapoor,
    please give also others a chance, and excuse that I get up late on vacation ;-)
    Anyway, I'd keep the story creation responder to recognize the copy, then combine it with an observer on the backing xml story to catch the associated XML element which is created there. Something like below:
    UIDRef xmlStoryRef = Utils<IXMLUtils>()->GetBackingStore(doc);
    InterfacePtr<ISubject> subject ( xmlStoryRef,IID_ISUBJECT );
    subject->AttachObserver(observer,IID_IIDXMLELEMENT,observer->GetAttachIID());

  • How can I see the information at the bottom of any window

    In the finder, how can I see the information at the bottom of any window (number of files etc..), like before Lion?

    In finder, show status bar. It's under View.

Maybe you are looking for