How do you add a printer to Print_print_printer option?

I cannot print to paper from Firefox. I have a MacBook Pro. I have done the about:config / print.print_printer, and it says "user set" type "string". I can print from Word and Safari, but not from Firefox. I have looked everywhere for an answer and cannot find anything that solves my problem. This problem first appeared about the time an update was downloaded.

1. Buy a AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
3. Start printing from your iPad without wire
http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

Similar Messages

How do you add a printer to your iPad

HI,
how do you add a printer to your iPad.

1. Buy a AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
3. Start printing from your iPad without wire
http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

How do you add Blind Copy to the options listed in the mail address book?

My I-Mac is the 20 inch Intel model running OS 10.4.7 and mail is 2.1.1.
When trying to forward mail I can chose Bcc by going to "View" and selecting Bcc, but then when I go to the address book to select the names that I want to Bcc there are only two options listed in the address book and they are "To and Cc". The only way that I have been able to set the addresses into the forwarding message is to drag each address from the address book and place it into the Bcc field on the forwarded note. There must be some way to enable the address book to list Bcc. Does anyone know how? Thanks
Bill
I-Mac Model 5,1 Mac OS X (10.4.7) 1 Gig ram/Intel core 2 Duo
I-Mac Model 5,1 Mac OS X (10.4.7) I-Mac Intel 2 Duo

Hi Austin,
Thanks for the response, but you kind of misunderstand my question. I actually want something much simpler than this:
When the Mail.app Data Detection recognises a telephone number or address, via a drop-down menu, I have the option to create a new contact or add the data to an existing contact. If I want to create a new AddressBook contact I am presented with a pop-up. This pop-up gives me the choice to enter a persons name, or by ticking the box, designate the entry as a company. I can edit the person's or company's name - this is often necessary as Data Detection, though generally quite good, doesn't always pick the correct data; for instance when the data is in the body of a forwarded e-mail. But what I can't seem to do is edit the entry to include a Contact Name and a Company Name. I may have to hand enter this information, I can accept that, but what I want to avoid is having to move away from Mail, open AddressBook and complete the contact creation therein.
What I simply require is the option to enter at least the standard AddressBook 'new contact' template fields from within Mail. So I need to know: Is there is a way of configuring the pop-up fields beyond the Mail.app defaults?
I hope this makes sense..
Thanks again..

How do you add a wireless printer to iPhone 4?

How do you add a wireless printer to your iPhone4?

You can't print from your iPhone to just any wireless printer.
See here:
AirPrint Basics
Also, some printer manufactures make apps that will allow you to print to their printers.
Check the app store.

How do I add a printer to my airport

How do I add a printer to my airport so I can print with my MAC and iPad and iPhone?

This is user to user support.. where if we can help you we do.. but otherwise we don't because we don't know the answer.
If your question is left for 24hours sometimes an Apple rep will point you to a document. that is all.. they never help.. just point.
Anyhow I see you have posted twice.. with time stamps 2min apart.
And in the wrong order so anything is possible.
ipad and iphone can natively print only to printer with airprint.
See printing with iOS..
About AirPrint
Does your printer support airprint.. ?? If so it will be wirelessly connected.
If it doesn't support airprint there are endless apps on itunes store to help you.
Look at a print software you load on the Mac that captures jobs for airprint and sends them to the correct printer..
Printopia.. but there are a zillion others.
http://www.ecamm.com/mac/printopia/
Nowadays printers are the razor holders.. the toner or ink cartridges are the blades.. just buy a new printer.. that is actually capable of the job. Plugging in USB printers and expecting to use them over networks is never 100% successful.. USB is an interface for local connection not network.

How do I add another printer to my laptop?

How do I add another printer to my laptop? I used to go to "add printer" and it would automatically find the printer I was near and I could add it. It doesn't allow me that anymore

Open Accounts preferences (Users & Groups if you are running Lion.) Click on the lock icon and enter your admin password. Click on the Add [-] button to create a new account. Configure the account with username and password as well as set they type of account - admin, standard, or managed.

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

Please keep in mind that Aperture is not an enhanced iPhoto, it is a different application with a different philosophy and a different intended audience. If you approach it with that in mind you will have a lot less frustration as you learn Aperture.
Aperture adds a layer of complexity that is not needed by many. iPhoto is a very powerful application and fits the needs of many amateur photographers.
As for your original issue, as I said I am surprised that iPhoto allows you do switch countries like that and am not surprised that Aperture doesn't. If this is something you really need to do working in Aperture but using iPhoto to order the prints is a good work around and will not be all that difficult to do once you get the hang of it.
As for your new question, the books in iPhoto and Aperture are different enough that the code that created the book in iPhoto wouldn't work in Aperture. What happens when you import an iPhoto library into Aperture is that the images in the book are combined into an album in Aperture with the same name as the iPhoto book. You will need to re-create the book in Aperture uaing the images in this album.
Hope this helps, post back if you have anymore questions.
regards

HT1218 how do I add a printer

How do you set up a guest wi-fi?
How do you connect a printer to the AirPort Extreme?

USB or Ethernet. Plug the printer into the extreme.
Then add it in your System Preferences panel.

How do you add fields to your PDF using Adobe Acrobat

how do you add fields to your PDF using Adobe Acrobat

Hello Sara!
Txs for your super quick reply.
Yes, we do have the full version for Adobe and when I am in tools and forms, what comes next?
See attached picture of pdf…
If you could help me with that, that would be great (the forums do not show any results…)
Thanks, have a great day!
Rilana
[private information removed by moderator]
P Please consider the environment before printing this email

How do I add wireless printer or Direct tv

How do I add wireless printer or Direct tv

These devices would be added the same way that any other wireless device is added as a client to a network......
1) Scan to select the network
2) Enter the wireless network password
Keep in mind that DirecTV cannot connect to a wireless network if there are special characters.....like an apostrophe, asterisk, dollar sign, etc......in the wireless network name.
So if your wireless network is named something like Ernestomelia's Wireless Network, DirecTV will not be able to to connect. Instead, the network should read something like ernestomelia network. A shorter name with no spaces would be better.
Your printer might have similar requirements, but you did not provide the make or model number of the device....so we don't have much to go on here. In general, you would want to contact support at the printer manufacturer for more specific information.

How Do You Add Multiple CSS Rules to Text?

Hi everyone, I have these css rules in my css styles window they are all assigned to some text in a cell on my page.
.Def14grey4 <body>
.def14grey4 a:link <a>
.def14grey4 a:visited <a>
.def14grey4 a:hover <a>
.def14grey4 a:active <a>
.def14grey4 a:focus <a>
How do you add (all of) these styles to the text in the first place, I know how to add the first one (.Def14grey4), you select the text in the cell and choose the rule from the drop-down menu in the css panel, but how do you add the other ones to some text as well, so that it can have the same link properties.
Basically I have some more text elsewhere on the page and want to assign these rules to that as well.
thanks Gareth

You would want to change your order as shown here -
.Def14grey4 <body>
.def14grey4 a:link <a>
.def14grey4 a:visited <a>
.def14grey4 a:hover, .def14grey4 a:focus <a>
.def14grey4 a:active <a>
That way, the hover and the focus states are equivalent.
How do you add (all of) these styles to the text in the first place, I know how to add the first one
You don't really. The 4 bottom selectors say -
"find an element with a class of 'def14grey4', and style any link inside that element this way"
So, <span class="def14grey4"><a href="whatever.html">Whatever</a></span> would get the pseudo-class styles, as would any of the following -
<span class="def14grey4"><a href="whatever.html">Whatever</a></span>
<td class="def14grey4"><a href="whatever.html">Whatever</a></td>
<p class="def14grey4"><a href="whatever.html">Whatever</a></p>
<body class="def14grey4"><a href="whatever.html">Whatever</a></body>
<div class="def14grey4"><a href="whatever.html">Whatever</a></div>
<strong class="def14grey4"><a href="whatever.html">Whatever</a></strong>
and so on. These examples assume that there isn't some other more specific rule that would apply to the same links. You need to study up on the CSS cascade and specificity....

How do you add a google calendar to muse web site, that updates are synced

how do you add a google calendar to muse web site, that updates are synced?

You can add Google Calender using iframe which Google provides if you go to calender settings.
Once you insert this code in Muse page through Object > Insert HTML , the calender will be displayed on page.
https://support.google.com/calendar/answer/41207?hl=en
Thanks,
Sanjit

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

How do you add non-Garage band instruments into a Logic project so that you can hear them on playback?

How do you add non-Garage band instruments (orchestral instruments) into a Logic Pro (8) project so that you can hear those insrtruments' sounds on playback? I've tried to understand and follow the Logic Pro 8 User Manual, but the process comes off as so complex and the writing so technical that it does not help but only confuses.
To be precise - I want to add instruments (orchestral) that are not offered in the current Garage band menu which is offered in the Mixer's channel strip menus for Logic Pro 8. To be clear, the instruments that are offered are Bass / Drum Kits / Guitars / Mallets / Organs / Pianos and Keyboards / Synth Basics / Synth Leads / Synth Pads. Most of these that I've tried seem to work and give their characteristic sound when placed in a particular channel and playback is clicked.
However - there is one orchestra instrument offered in the standard Logic Pro 8 Mixer channel menu and it's the item labelled "Performance - 000 flute 1 or 001 flute 1." And it is this instrument that presents a problem. When I click on it and choose it from the menu and enter it as the instrument of choice for a specfic channel / track in my Logic Pro project arrangement, when playing back the music for the overall piece this particular track, the flute, does not playback and produce the notes (Midi events) in the track in the sound of the flute. Instead, nothing comes out at all. I can't imagine why this does not work. Any ideas, anyone? Again, when choosing this instrument for a track and clicking the playback no flute sound is forthcoming. Why not? I have not tried them all, but when most of the other various types of keyboards, such as an electric piano or an organ, are chosen for a track the playback successfully renders the sound of these instruments. Why then does playback not produce the sound of the flute when it has clearly been chosen to play and sound the Midi events given it?
Anyway, the overall, larger issue for me is the inability I have to choose and get non-Garageband instruments (largely orchestral) to play the Midi events given on various tracks. If my guess is correct then technically, orchestral instruments not offered in the standard Logic Pro 8 Garageband Mixer channel menu are referred to as external Midi sampled instruments - still, IMHO the process is not clearly spelled out in the User Manual. The simple step by step process whereby a non-Garage band instrument, say an orchestral instrument, is placed in a channel replete with Midi event (notes) waiting to be played should be easy, logical and given in a simple to follow format, but is not.
What with all the talk of routes, busses, auxillary channels, GM devices, GM mixers, audio bins, libraries and audio files this Logic Pro User is confused to the max. Can someone please help me and, in simple English, describe the step by step process whereby presumably external sampled orchestral instruments can be successfully employed, in any given Logic Pro arrangement project, to render their characteristic sounds upon playback?
On my two Macs, one a laptop and one a much larger Mac, I have any number of the GSO (Garritan Symphony Orceshtra) and Vienna Symphony Orchestra instrument library samples - and yet - I've yet to figure out how to actually get them INTO a Logic Pro project of any kind! To put this as a question, even as a humble request, how can I make good use of these orchestral sample libraries in a Logic Pro project? Can someone steer my to a clear resolution of this issue. I'd sincerely appreciate it! Thanks all!
DavidBacon

DavidBacon wrote:
Anyway, the overall, larger issue for me is the inability I have to choose and get non-Garageband instruments (largely orchestral) to play the Midi events given on various tracks. If my guess is correct then technically, orchestral instruments not offered in the standard Logic Pro 8 Garageband Mixer channel menu are referred to as external Midi sampled instruments - still, IMHO the process is not clearly spelled out in the User Manual. The simple step by step process whereby a non-Garage band instrument, say an orchestral instrument, is placed in a channel replete with Midi event (notes) waiting to be played should be easy, logical and given in a simple to follow format, but is not.
What with all the talk of routes, busses, auxillary channels, GM devices, GM mixers, audio bins, libraries and audio files this Logic Pro User is confused to the max.
David, you understand that this is professional software and is not necessarily meant to be easy but is in fact designed to give the professional user as many choices as possible, that's why it's in the Pro Apps section. You WILL need to learn about buses, GM Devices, Audio Bins, Libraries...etc..etc if you intend to use Logic.
That said, you are looking in the wrong place in the channel strip.
May I offer you advice?
Go here:
http://documentation.apple.com/en/logicpro/
Open "Exploring Logic Pro" (a short PDF Document). Pay special attention to chapter 3. Also pay special attention to the included graphics of the channel strips.
I encourage you to read the whole document as it will clear up many things... even though it's a Logic 9 document.
Post back

How do you add an iTunes Gift Card & how is it charged?

Hey all,
I currently pay for my iTunes downloads direct from my Debit Card. If I add a gift card to my account will the cost of downloads come from that automatically or do I need to let iTunes know thats what I want?
Also - how do you add the card? I'm probably being totally stupid but can't seem to find an "add credit here" option.
Help appreciated

If you redeem an iTunes gift card, the next purchases you make up to the value of the gift card will be made from it automatically. To add the card, click here; this link will open iTunes.
(34512)

How do you add a printer to Print_print_printer option?

Similar Messages

Maybe you are looking for