How do you get a Sub Query in a Mapping
Hi, I am wanting to know how or what the work around is for getting a Sub query in a join operator?
Its a really common place thing to do, I need to add an where exists or not exists type clause to one of my mapping joins.
Can someone please advise how this can be done using OWB.
Thanks,
Richard.
I'm interested too.
Please help, I had own method to management iCal's event – new line, of 10.7 worked great – now is a little terrible for me :/
Similar Messages
-
How do you get a line with MULTIPLE fields to WRAP ?
How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007 -
How to find out which sub query returns more than one row
Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
prxm.mbr_idntfr AS "Beneficiary ID",
md.last_name
|| ', '
|| md.first_name AS "Beneficiary Name",
pci.idntfr AS "Tracking No.",
TO_CHAR (TRUNC (req.pa_rqst_date),
'MM/dd/yyyy'
) AS "Request Date",
sts.status_name AS "Status",
req.pa_rqst_sid AS "Request #",
prxm.mbr_sid AS "Mbr_sid",
TO_CHAR
(TRUNC (req.pa_revision_date),
'MM/dd/yyyy'
) AS "Last Updated",
TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
DECODE
((SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
0, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "NPI/ID",
DECODE
((SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT pd.last_name
|| ', '
|| pd.first_name
|| ' '
|| pd.middle_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "Prvdr Name",
TO_CHAR (psd.from_date,
'MM/dd/yyyy'
) AS "Srvc From Date",
TO_CHAR (req.validity_start_date,
'MM/DD/YYYY'
) AS "Due Date",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>Left",
req.pa_mode_type_lkpcd AS "Source",
TO_CHAR (TRUNC (wmdtl.rtng_date),
'MM/dd/yyyy'
) AS "Assigned On",
NVL (wmdtl.assigned_to_user_name,
'Not Assigned'
) AS "Assigned To",
req.org_unit_sid AS "OrgUnitSid",
TO_CHAR
(wmdtl.modified_date,
'MM/dd/yyyy hh24:mi:ss'
) AS "WTRD_MODIFIED_DATE",
TO_CHAR (wmdtl.rtng_date,
'MM/dd/yyyy'
) AS "WTRD_RTNG_DATE",
req.status_cid AS "PA_STATUS_CID",
TO_CHAR (req.modified_date,
'MM/dd/yyyy'
) AS "PA_REQ_MODIFIED_DATE",
prs.state_pa_srvc_type_code
AS "STATE_PA_SRVC_TYPE_CODE",
wmdtl.wm_pa_task_rtng_dtl_sid
AS "WM_TASK_RTNG_DTL_SID",
wmdtl.assigned_to_user_acct_sid
AS "WTRD_Assigned_to_user_acct_sid",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>LeftSort",
wmdtl.assigned_to_org_unit_sid
AS "WTRD_Assigned_to_OrgUntSid",
DECODE
((SELECT COUNT (*)
FROM pa_request_status prs
WHERE prs.pa_rqst_sid = req.pa_rqst_sid
AND prs.status_cid = 5
AND prs.oprtnl_flag = 'I'),
0, 'N',
'Y'
) AS "SHOW_UTILIZATION"
FROM pa_request req,
pa_certification_identifier pci,
status sts,
pa_request_x_member prxm,
wm_pa_task_routing_detail wmdtl,
pa_service_date psd,
org_unit ou,
pa_request_service prs,
pa_request_x_provider_location prxpl,
provider_location pl,
provider_detail pd,
provider p,
mbr_dmgrphc md
WHERE req.oprtnl_flag = 'A'
AND req.status_cid NOT IN
(20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
AND req.org_unit_sid IN
(3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
3101, 3186, 3102, 3187, 3103, 3003, 75000104,
75000108, 2006, 75000103, 75000102, 75000113,
75000111, 75000109, 2001, 2009, 75000105,
75000107, 2004, 2010, 2013, 2014, 2005, 2011,
75000112, 2002, 1001, 2012, 75000106, 2007,
75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
3140, 3056, 3141)
AND req.pa_rqst_sid = prs.pa_rqst_sid
AND prs.oprtnl_flag = 'A'
AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
AND psd.oprtnl_flag = 'A'
AND req.pa_rqst_sid = pci.pa_rqst_sid
AND pci.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxm.pa_rqst_sid
AND prxm.oprtnl_flag = 'A'
AND md.oprtnl_flag = 'A'
AND md.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
AND prxm.mbr_sid = md.mbr_sid
AND ou.org_unit_sid = req.org_unit_sid
AND ou.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
AND pci.pa_rqst_sid = prxm.pa_rqst_sid
AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxpl.pa_prvdr_type_lkpcd = 'RR'
AND prxpl.oprtnl_flag = 'A'
AND req.status_cid = sts.status_cid
AND sts.status_type_cid = 3
AND sts.oprtnl_flag = 'A'
AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
AND p.prvdr_sid = pd.prvdr_sid
AND p.prvdr_sid = pl.prvdr_sid
AND pd.oprtnl_flag = 'A'
AND pd.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
AND wmdtl.subsystem_lkpcd = 'PA'
AND wmdtl.oprtnl_flag = 'A'
AND req.pa_rqst_date > (SYSDATE - 365)
ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
"Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck! -
How can I get the sub folders in room structure?
Hi guys,
I have a quesion: in KM-Collaboration-roomstructure, if I have a folder A, how can I get its sub folders like A.1,A.1.1,A2.
I mean of course how code can realize: using context folder=(IPcdContext) ictx.loopup(path) ?
Please give me some hint!
Thanks so much!
Regards,
LiyingThe phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.
-
How to write multi row sub query with the row containing range of values?
Hi all,
I have to include a column which contains weight ranges and it should come fom table called "report_range_parameters"
The following query will reutrn those weight ranges.
select report_parameter_min_value || ' -> ' || report_parameter_max_value
from report_range_parameters
WHERE report_range_parameters.report_parameter_id = 2359
and report_range_parameters.report_parameter_group = 'GVW_GROUP'
and report_range_parameters.report_parameter_name = 'GVW_NAME'
The below query should return the values group by those weight ranges.
How could I write that sub query?
select SUM(NVL("Class 0", 0)) "Class 0" ,
SUM(NVL("Class 1", 0)) "Class 1" ,
SUM(NVL("Class 2", 0)) "Class 2" ,
SUM(NVL(" ", 0)) "Total"
FROM (
SELECT report_data.bin_start_date_time start_date_time,
SUM(DECODE(report_data.gvw, 0, report_data.gvw_count, 0)) "Class 0" ,
SUM(DECODE(report_data.gvw, 1, report_data.gvw_count, 0)) "Class 1" ,
SUM(DECODE(report_data.gvw, 2, report_data.gvw_count, 0)) "Class 2" ,
SUM(NVL(report_data.gvw_count, 0)) " "
FROM report_data
GROUP BY report_data.bin_start_date_time
) results
RIGHT OUTER JOIN tmp_bin_periods
ON results.start_date_time >= tmp_bin_periods.bin_start_date_time
AND results.start_date_time < tmp_bin_periods.bin_end_date_time
GROUP BY tmp_bin_periods.bin_start_date_time,
tmp_bin_periods.bin_end_date_time Thanks.
Edited by: user10641405 on Jun 15, 2009 3:14 PM
Edited by: user10641405 on Jun 15, 2009 3:17 PMHi,
Assuming the following 4 things:
(1) report_range_parameters contains data like this, from your [previous thread|http://forums.oracle.com/forums/message.jspa?messageID=3541079#3541079]
id group name min_value max_value
1 gvw_group gvw_name 0 5
2 gvw_group gvw_name 5 10
3 gvw_group gvw_name 10 15(2) max_value is actually outside the range (that is, a value of exactly 5.000 is counted in the '5->10' range, not the '0->5' range)
(3) the range has to match some column x that is in one of the tables in your main query
(4) You want to add that column x to the GROUP BY clause
then you shopuld do somehting like this:
select SUM(NVL("Class 0", 0)) "Class 0" ,
SUM(NVL("Class 1", 0)) "Class 1" ,
SUM(NVL("Class 2", 0)) "Class 2" ,
SUM(NVL(" ", 0)) "Total"
, report_parameter_min_value || ' -> ' || report_parameter_max_value AS weight_range -- New
FROM (
SELECT report_data.bin_start_date_time start_date_time,
SUM(DECODE(report_data.gvw, 0, report_data.gvw_count, 0)) "Class 0" ,
SUM(DECODE(report_data.gvw, 1, report_data.gvw_count, 0)) "Class 1" ,
SUM(DECODE(report_data.gvw, 2, report_data.gvw_count, 0)) "Class 2" ,
SUM(NVL(report_data.gvw_count, 0)) " "
FROM report_data
GROUP BY report_data.bin_start_date_time
) results
RIGHT OUTER JOIN tmp_bin_periods
ON results.start_date_time >= tmp_bin_periods.bin_start_date_time
AND results.start_date_time < tmp_bin_periods.bin_end_date_time
LEFT OUTER JOIN report_range_parameters -- New
ON x >= report_parameter_min_value -- New
AND x < report_parameter_max_value -- New
AND report_range_parameters.report_parameter_id = 2359 -- New
and report_range_parameters.report_parameter_group = 'GVW_GROUP' -- New
and report_range_parameters.report_parameter_name = 'GVW_NAME' -- New
GROUP BY tmp_bin_periods.bin_start_date_time,
tmp_bin_periods.bin_end_date_time
, x -- New -
How do you get audio files to loop instead of playing just once.
how do you get audio file to loop instead of playing just once.
ThanksThis forum is specifically meant for Edge Inspect issues. Could you please let us know the product your query is related to. We will redirect you to the correct forum.
-
How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP
Kappy wrote:
Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
Boot into Recovery (hold ⌘R on boot)
Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
Quit Disk Utility
Then Select: Restore from a Time Machine Backup. -
How do you get Safari Browser back on your Iphone if your daughter erased it?
how do you get safari browser back on your iphone if your 4 yr. old daughter deletes it by accident?
You cannot delete Safari.
It is either on another page, in a folder, or you have restirctiosn set.
Check all three of these possibiities. -
How can you get your photos in the order they are in your computer
How can you get your photos synced to your phone in the same order as the file on your computer?
The iPhone Photos app orders photos by date.
-
How can you get your submit buttons to be a single click instead of the default double click? (The
How can you get your submit buttons on the quiz template to be a single click instead of the default double click? (The option to choose double click or not is not showing in properties for this).
Hmmm... Submit button doesn't need a double click at all. Maybe you are talking about the two-step process? When you click on Submit, the feedback appears with the message to click anywhere or press Y. Is that what you are talking about? If you are talking about a real double-click, something must be wrong in your file. And which version are you using?
http://blog.lilybiri.com/question-question-slides-in-captivate
Lilybiri -
How do you get your purchased items on apple tv to you i tunes on your computer
How do you get your purchased items on apple tv to you i tunes on your computer
Download them.
Store > Check for Available downloads. -
How can you get your i pod touch screen fixed
How can you get your screen on an i pod fixed
Apple will exchange your iPod for a refurbished one for $199 for the 64 GB one and $99 for the others. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
HT4972 after downloading ios5.1.1 how do you get your music back on your ipod?
after downloading ios5.1.1 how do you get your music back on your ipod
Sync it from your iTunes library
Redownload iTunes purchases by
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If it was not in your iTunes library and you updated via iTunes you will have to get the music again sinve synced media like apps and music are not include din the iPod backup that iTunes makes. -
How do you get your apps from the i tunes library onto your mac?
how do you get your apps from i tunes library onto your mac
You don't. Apps from iTunes are for iOS devices. Apps for the Mac come from the Mac app store. Click the apple >> app store.
-
how do you get your old scores on your games when you transfer the games between devices ive signed into game center and my scores are there but when I open the games Im at 0 again
Did you do this?
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
Maybe you are looking for
-
I have no idea what to do next?!
I am posting this here because I have no other ideas of what to do next. I purchased an item in October (a pre order item) and when I got it in December, I noticed it had issues and returned it to the stores. I used $115 in reward certificates to pur
-
How do I get around backing up to a single DVD?
I have close to 3,000 photos in our main library and they don't all fit on a single DVD when I click "Burn" from the Share menu. What is the best work around for this? If I attempt to burn the Originals folder, will that automatically ask for additio
-
Using Variable in the Data Template
Hi All, I am on BIP 10.1.3.4.1 and DB is SQL Server. My Data Model is a Data Template wherein I have written multiple SQL Statements. I want to use a variable in my Data Template, assign it a value and use that variable to limit one of the SQL statem
-
[resolved] Launching crash with Flash builder and Unrecognized Java VM option
Hello, I just wanted to share my experience with Flash Builder. Funny if we can call it like that... I tried to launch Flash builder, which worked since years without problem, but here, there was a problem. In the console log; it says only that : Unr
-
Hi everyone, Even though SAP is not recommending core modification, we have a requirement to do core modification in VA02 transaction. As per the requirement if user goes to Deliver menu (VA02 -> Enter -> Sales Document -> Deliver) by default it goes