How do you highlight a sentence that spans two pages without having to make two notes?

If a sentence starts on one page and continues to the next, how do you highlight the entire sentence without having to start a second note for the second page? I know it's possible because one of my notes is highlighed that way. This seems like it should be a simple thing to do. But I can't figure it out and I can't seem to find any solutions either.

Not sure if it'd make any sense, given the device and software,
but what happens if you could resize the page so that sentence
is in one page, then resize the page back to original size; which
should make both halves of a sentence still retain that aspect?
Just an idea...
Dangerous enough?

Similar Messages

How do you delete contacts from your phone for good without having it appear in the messages app?

How do you delete contacts from your phone for good without having it appear in the messages app?

Hi tieyce,
You need to hook up your iPhone, select it under Devices, and then go to the Photos tab on the Device Profile, and uncheck Sync Photos, then sync. That should delete all photos that were downloaded from your computer.
When you say you have 2 separate albums of the same sets of pictures, what 2 albums are you referring to? Can you provide us with names of those "duplicate" albums?
Cheers,
GB

How do you duplicate a PDF fill in form page, WITHOUT linking the text (for MAC)??? That is, while still being able to type different things into the blanks on the duplicate pages?

The Situation (again, I have a Mac): I am filling out a 5 job application- it is PDF format, with questions, and fill in the blanks for your information- such as name, date, and employment history. Page 3, is the page used for employment history. But, there is only room for two jobs on page 3. The instructions tell you, you can "have as many page three's" as you want. In my case, I will be putting 8 jobs- at two jobs per page, that is a total of 4 page three's. I already know how to duplicate a PDF page, simply by opening the thumbnail viewer on the side, holding down the "alt" key, and clicking and dragging the desired page to create a duplicate. So what is the problem??? When you duplicate the page, the boxes into which you type, are linked. So if on the original, you type "Job A", into the experience box, it forces the same answer on the duplicate page, making it impossible to describe different positions!!!! Is there a way to work around that? Thank you!!!!!

You're probably using Acrobat if you can duplicate pages like that. This is the Adobe Reader forum...
To answer your question, though: The only way this can be done automatically, without having to manually rename each field, is to use a Template to spawn new pages. This is something the form's author should have done, but you can do it yourself as well, using some code.

How do you open the downloads that have been saved? I can make it to the download list but it will not let me open any of them.

When I open an email with an attachment, it downloads the attachment and saves it to my downloads. At a later time, I return to the download list and try to open it and it will not allow me to open them. How do I open my saved downloads?

If the Open or Open Containing Folder entry in the right-click context menu of a file in the Download Manager is grayed then that means that the file is no longer in that original download location. It may have been removed by cleanup software or anti-virus software if you haven't deleted the files yourself.

How do you create a part that has two through holes with a single net connecting to both.

I attempted to create a part that contained 2 through holes with a copper strip between them so they would connect to a single net, but one of the holes (pin 2) gets rejected by Ultiboard as an unconnected entitiy. Is there a way to define the second hole (pin 2) in such a way as to mitigate the problem?
Thanks, Tod
Solved!
Go to Solution.

Hi
It is quite simple to do so:
when making the footprint, you just put your two TH pins where you need them. name them 1 and 2.
Then in Multisim, when making a new component with the component wizzard,in step 2 make a 1-pin component, and select your desired footprint(which has two pins).
thenin step 3, make/choose your 1-pin symbol.
In step 5 you can map the footprint to the symbol , just use both footprint pins for the same symbol pin.
When using it in your schematic, you'll see one pin, in the layout, there will be two pins connected together..
Good luck
stressed user..

How can you play the project from a certain point without having to watch it over from the beginning?

I'm doing a project on iMovie and whenever I want to replay it replays from the beginning not from the point in the project that I would like to preview it from. How can I change this?

Move the playhead to wherever you want to start then press the space bar.
Geoff.

How can you view multi day events in month view without having to check the "all-day" box?

I have multi-day events that I would like to be able to view in the month view. The only way that I have found to do this is to make the event a "all-day" event. Is there another way to view these events in month view, or am I stuck?

It shows multi-day events that are "all-day" events.
But for a non "all-day" event that happens to span multiple days, it only shows the first day

How can i copy multiple projects that reference one event without having to duplicate the event over and over for each project?

Each project has compound and regular media in them, and every time i attempt to duplicate the projects and have them reference one event on the new drive the rest of my media shows up missing and will not reconect. Wondering if anyone has had to tackle this problem. I have a limited amount of space on my Drobo thunderbolt drives and need to optomize it. Thank you

So i called apple and after a few hours on the phone and them taking control of my computer they pretty much told me they had never seen this before and were sorry they couldnt assist in any way. The long explination is that i work for a company that films their footage in one long take and then sends it to me to cut into segments, i then have to copy these small edits which are all in different projects and the one large event over to a new hard drive to give to a guy to put titles on and then send back to the company. when i do this copy of project final cut X forces me to also duplicate the event leaving me with "event" (fcp1) and so on depending on how many projects there are. When i dont duplicate event and project together the whole project shows up as missing media and final cut X does not recognize that the original footage is being lost and therefor i am not even given the oportunity to reconect media. I have tried all conventional ways of copying and transfering and have an extensive background in editing and have never come across this, but then again this is final cut X and something that i try and stray away from if i have a choice in systems.
to answer Tony im using copy project and event because it is the only option that works (copy project and used media works as well but only creates more confusion with having to rename files) I would prefer to be able to just copy the first project and event and then be able to source the rest of the project files from the first event i copied over.

I am new to mac. I have a Mac Book Air with an external CD drive. How do you safely disconnect the external drive when done without having to power off the laptop?

I know there is a way to safely "disconnect" the USB, I just can't remember what it is. Thanks

Hi kbstuckr,
Go to your Finder. You will see the drive listed with a little arrow with a bar below it next to the drive. Click on that to "eject" it.
Cheers,
GB

How do you highlight text in document in Pages

How do you highlight text in document in Pages

but Pages is NOT a 3rd party app. it's an application that's programmed by apple. it's supposed to act something like Word in MS office, but that is not at all true.
choices for editing text, highlighting, et al., like what you find in MS Office Word, should be immediately available whenever you are inside of a Pages document, but that is not the case.
don't you wish that when you buy an apple app for apple/macs that is supposed to be like a windows something or another that it really is?

How do you select an object that is directly under another object?

How do you select an object that is directly under another object?
I was working from a template and I wanted to make a text box the same size as a column box that was put there in order to keep the text in the confines of the paper that is was being printed to.
I could actually put text in each column fine but I wanted it to be in a text box so that I could slightly tilt the test box to compensate for my printer feeding it in slightly wrong. I accomplished this on another template but I could not on this one. If I was working in InDesign or something I know I could just select that layer but I'm at a loss of what to do here. How do I select a column right under a text box? I just thought of something. Once I make the text boxes the same size as the columns I think I can just delete the columns from the inspector. But that would be kind of a work around. I know you can hold down command when nothing is selected from outside the document and then highlight but this is not working. Does anyone have some tips and tricks when it comes to having control over which objects you are selecting when it comes to objects that are overlapped as well as directly over each other.
Thanks.
Tim

I'm not sure it's documented any where, but it's not too difficult. First, ⌘-click outside of the layout area to enter object mode then drag the cursor towards the two objects until you see the handles. Now, again ⌘-click on the top object to deselect it. You can now move the underlying object to the front to edit, delete, etc.
After typing this, it dawned on me, why not just click the top object to select it & move it to the back? I've only done the other way a bazillion times & now I think of this.

How do you highlight iHelp Buttons and List Applet fields

How do you highlight iHelp Buttons and List Applet fields? I've followed all the steps in the Bookshelf but it seems like buttons and list applet fields do not highlight. The highlight feature only seems to work in form applets. Is this a known issue? Are there workarounds for this?
Thanks
Bernhard
Edited by: Bernhard on Dec 12, 2011 2:06 PM

Bernhard
I remember that colors of single list applet fields cannot be changed, since the whole list is regarded as one "control" itself. It works for single fields in form applets (as you said) but not in list applets. There is a document in MyOracleSupport pointing this out, but at the moment I can't find it.
Regarding iHelp Buttons I have no idea.

How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time?

How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time? Right now, when I'm trying to highlight documents to export, I have to click on each document individually. Is there a way to highlight one document while scrolling down the list until all desired documents are highlighted? I would like to rapidly be able to do this to save time when I am exporting or saving multiple files from my documents to an external drive, CD-Rom or cloud storage.

Click on the first item
Hold the Shift key
Click on the Last Item.
All the items in between will be selected.

No longer use this email account but how do you backup the email that is...

No longer use this email account but how do you backup the email that is in the "example" folder, So that I can delete the account on my mail app?

Not sure what you mean. Deleting a POP account only deletes the messages stored in the account’s mailboxes, not any messages stored in custom “On My Mac” mailboxes, if that’s what you mean. It’s not that Mail goes after your mail trying to delete as much as it can. It’s just that if a mail account is deleted, then its mailboxes cannot exist anymore...
That said, instead of deleting the account right away, you can just disable it (i.e. turn OFF Preferences > Accounts > Advanced > Enable this account), leave it that way for some time, and delete it only after making sure you didn’t miss anything while the account was disabled.
BTW, if you back up your data, and the ~/Library/Mail folder in particular, you won’t have to worry about accidentally losing anything as a result of doing something like that...
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

How do you highlight a sentence that spans two pages without having to make two notes?

Similar Messages

Maybe you are looking for