How do you physically secure the new Mac Pro's?

I am looking to buy the new Mac Pro, and went to see one in the apple store today, I asked the shop assistant how I would physically lock the Mac Pro to something too keep it safe and secure in an office environment and he said he didn't know how you would. It doesn't seem to have a laptop style hole to use a cable lock or anything like that. They are incredibly small and easy to pick up and pop in a bag...
So has anyone come across anything like this to answer my question?
https://discussions.apple.com/thread/5695967?tstart=0
This discussion doesn't seem to be a reasonable solution.
Cheers

@Will172
I am not a DIYer especially not when it comes to locking something as valuable as a Mac Pro.
My go to compnay for locking mac stuff is maclocks and they just announced this http://www.maclocks.com/mac-cable-locks/mac-pro-lock-bracket-with-security-cable -lock-fits-new-mac-pro.html
Don't know if you already built the solution for yours but this is looking to be a great one.
I have dealt with maclock on a few occassions because I bought their macbook pro bracket lock and couldn't be happier.

Similar Messages

Is the new mac pro 2014 upgradable? if so which parts?

I am a Video editor and graphic designer. i want to know how far can i expand the new mac pro 2014.. which parts on the machine are upgradable.

It is actually "Late 2013" in Apple parlance. Most use "nMP" for New Mac Pro" or you could call it a 6,1
There is no sign or confirmation that the Dxxx can be upgraded unless from another nMP, doubt there will be upgrades while SSD etc are and Apple shows how on product support page how to remove and install memory and the SSD device.

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

How late is the new Mac Pro?

Hi! My name is Alvaro and I would like to know how much time have you had to wating for the new Mac Pro since you order untill you get it. I ordered mine last monday (january 20th) and it was the first day that the apple store put "march" as a date of shipment.
I'm excited!!
Thank you!

Folks been waiting for YEARS for a new mac, I suspect there is a lot of pentup demand, especially as Europe has been w/o a Mac Pro replacement or for sale for a year almost now.
Some production and manufacuring lines get shutdown during holidays around the world and you can't just push a switch when it comes to some electronic parts, wafers. And even some early production can reveal the need for changes, new firmware, and other changes. Even the operating system that they ship with is likely showing newer builds every couple weeks until they reach a universal shipped build.
So in some ways the delay can work in your favor. The first 3-4 months are often when they have a chance to test the hardware in the field. Getting software updates from vendors who also need to get their hands on new machine to see that it works properly - even FinalCut Pro 10.1 is seeing changes and improvements in how well it behaves, and that is an Apple suite.
Long overdue. Summer of 2010 will afteralll be 4 yrs since the last Mac Pro configuration, which was only an "enhanced" Early 2009 model itself. That makes it 5 yrs on the same socket and base motherboard.

How fast is the new Mac Pro 8 core comparred to Mac Pro 4 core?

Hi,
I consider to update my 1.5 year old Mac Pro 2.66 ghz (4 core) to a Mac Pro 8 core. I use this machine as the center in my studio running Logic 8. I use a lot of V.I. and plugs.
Can anyone tell me anything about the gain in performance that is possible upgrading to an 8 core?
Or show me where to find information. MacWorld use to be my resource in that kind of matters, but they never use Logic as a test program.
Thanks in advance!
Stigc56
Musicmind.dk

Glenn,
The new Mac Pro will be faster at everything when compared to your older PowerMac, but I think the first 2 items you list will be more dependent upon drive speed.
1. The FSB and memory are faster in the new Mac Pro, but reading from the CD will only be as fast as the optical drive can handle.
2. How fast the TIFF file is displayed in the Finder may be more dependent upon the read speed of the hard drive than the processing speed required to create the thumbnail view displayed by the Finder.
3. Working in CS3 should definitely be faster. Even though you didn't want a response that linked to a test, the following BareFeat test should show how much faster CS3 is on the new Mac Pro.
http://www.barefeats.com/harper.html
Keith

How can I move my three SATA HDDs to the new Mac Pro without backing up?

Hello,
I am doing initial shopping for the new Mac Pro but have come to the frustrating realization that I cannot move my HDDs to the new computer for free. Sure, I can migrate my OS drive to the new one, but my other three disks inside my 2007 Mac Pro are in a pickle. I want an economically viable method of getting those three drives to the new Mac without backing them up, formatting or something like that. Also, I would prefer a transfer method that will rival the speed of it being internal. I don't think USB 3.0 can do this, but Thunderbolt 2 can? Everything I've seen online has been outrageiously expensive or requires me to reformat (RAID).
What I'm looking for:
Connect three or more HDDs of various capacities to new Mac Pro
Have the transfer speeds rival or exceed that of my current grandpa computer (Mac Pro 1,1)
Have it not be incredibly expensive (anything over $300 is ridiculous)
Have it be no more than two devices, one prefered unless they are individual enclosures that can either daisy chain and/or are inexpensive.
Safe for my drives.

> a 3 TB, a 1.5 TB and a 500 GB.
Most 3TB drives are going to be "green"
The 1.5TB may or may not
The 500GB is likely old, due for retirement if not worse.
A pair of two drives of 2TB likely would be enough for now and plenty of dual drive USB3 cases.
For a single drive and Thunderbolt docking adapter for using one drive at a time:
http://www.amazon.com/Seagate-Backup-Portable-Thunderbolt-Adapter/dp/B009HQCARY/
Under $300 case
http://eshop.macsales.com/item/OWC/METB7DK0GB/
Or this one is fine and USB3
http://www.amazon.com/StarTech-com-External-Enclosure-3-5-Inch-SAT3520U3SR/dp/B0 09C5VSFU/
NO backup? You DO have some backups I hope, or you are on thin ice or walking tight rope.
Some helpful guides on USB3 vs TB
http://www.macperformanceguide.com/topics/topic-USB3.html
http://www.macperformanceguide.com/index_topics.html#MacPro2013Transition
http://www.macperformanceguide.com/topics/topic-Thunderbolt.html
1TB WD Blue go for $60?

HT4413 Will the files that you transfer to the new mac, be removed from the old one or just copied?

Will the files that you transfer to the new mac, be removed from the old one or just copied?

Copied.

How to use hard drives with the new mac pro

A few quick questions about upgrading to new Mac pro desktop
I currently have 4 internal hard drives for a total of 8T
What will the solution be to add storage to the new desktop?
I assume it will be thunderbolt options?
Lets say I wanted at least 8TB of storage to add to the computer
and attached the storage via thunderbolt will it be as fast data throughput
as the harddrives in my current computer hooked up to the external bus?
I also have a pci card running my audio plugins for Universal Audio how will those pci
cards work on the new mac pro?

Also will the transfer rate with the pegas be as fast as if the drives were connected to the bus in the machines like the old mac pro?
To answer that, think of this as a Bottleneck problem. The overall performance is as slow as the slowest device.
At this writing typical rotating drives can produce a momentary burst at 125 MBytes/sec or 1,000 Mbits/sec. Only FireWire 800 is starting to be a limit for that -- EVERYTHING else is faster. Thunderbolt-1 is 10,000 Mbits/sec -- ten times faster.
The best SSD can produce a burst at maybe 800 MBytes/sec or 6,400 Mbits/sec. There is not a big speed difference in an SSD RAID, because the latency is already low. But the 10,000 Mbits/sec of ThunderBolt-1 is still plenty fast enough for that as well.
If ThunderBolt-2 devices really can run a single data stream at 20,000 Mbits/sec, that does not make ANYTHING faster -- it just moves the ceiling (potential bottleneck) a bit farther away.

I'm in the market for the new Mac Pro.

I'm in the market for the new Mac Pro. I've been waiting for it to be released and have some cash set aside for this. I am a video editor and use Premiere Pro CC, and After Effects. My primary content is simple documentary films - so nothing too intense, but always HD (1080) video. I don't see 4k in my future but it's always a possibility so I want to future-proof my purchase for the next 3 years or so. With respect to storage space and RAM, I can make that decision myself based mostly on cashflow (since they are likely both user-expandable). However, with the basic configuration of the number of cores and video graphics card, I could use some advice. I think they are both set for the life of the computer, so important to get it right.
My current thinking is to start with the 6 core model (I guess I have no real reason for this decision, except that I feel like the 4-core base model is put there to make the price feel lower, while the real advantages in performance start at the 6 core - am I way off on this one?). But, I wonder if I should spring for the 8 core or even the 12 core? Probably overkill for me - out of my budget anyway.
The other decision is the graphics card - is the D500 enough? Will it be limiting factor in the future? Or should I move to D700?
Here are the cost differences:
from 6 core to 8 core is $1500
from D500 to D700 is $600
Which is worth it? (neither, both?)
Thanks.

Whether it's worth it depends more on you and what your current and future needs are.
The good news is that Adobe's CC apps can already take advantage of the AMD FirePro GPU's in the Mac Pro, and offer hardware acceleration of the Mercury Playback Engine, which you'll see in Premiere, After Effects, and Media Encoder. According to the Adobe staffers I've talked to, even the FirePro D300's will see a big benefit, in fact they say you won't see a big bump by upgrading the GPU. As far as Adobe's apps are concerned, their OpenCL use is all single precision, and the D500/D700 upgrades put a lot of weight in double precision performance (which is unused in their apps). Their recommendation - put the bulk of your budget on cores and RAM.
How many depends on how elaborate and complex your work is. Simple documentary films with the odd effects, transitions, titles, and grading.. you'd be fine with a 6-core IMO. If you're leaning towards getting into really layered comps and effects, you'd shorten those long render times down a lot with the 8-core. As for memory, I'd recommend at least 4GB per physical core.
Good luck!

Premiere Pro CC and the New Mac Pro (2014)

I'm expecting delivery soon of a new Mac Pro, nicely loaded, which I purchased mainly because of all the work I do with video. Yet, I read in a review that Adobe Premiere Pro isn't optimized to take advantage of the new Mac Pro, won't run faster, and I'm better off using Apple's Final Cut.
1. Is this true?; and
2. If so, will Premiere Pro be updated any time soon to run best on a 2014 Mac Pro?
My new Mac Pro will have the following configuration:
3.5GHz 6-core with 12MB of L3 cache
32GB (4x8GB) of 1866MHz DDR3 ECC
1TB PCIe-based flash storage
Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each

My main problem is that when i export using gpu open gl it crashes hard boot the mac pro. A 3 min timeline with 4k footage n a bunch of color grading. I get lucky if the timeline is shorter. But i think it is a gpu issue n my mac must be fixed. Currently under apple tech support. N my case is unique. No one has had the same issue and that makes it harder for me to figure the isse and to apple figure the issue.
If i export using software only mercury then the export goes smoothe no mattrr how long. But that defeata the point of owning a mac pro with 2 GPUs
Enviado desde mi iPhone
El 29/03/2014, a las 01:51 p.m., BanksMeador <[email protected]> escribió:
Re: Premiere Pro CC and the New Mac Pro (2014)
created by BanksMeador in Premiere Pro - View the full discussion
I have had my 12 core 2014 Mac Pro for a couple of weeks now, and I'm not very impressed with Premiere CC performance with 4K R3D on a 1920 x 1080 timeline.
I understand that there may be an update soon that will take adantage of the CPU's and GPU's when it comes to the complex task of de-bayering the R3D footage, but it's just not there now.
I get similar playback performance to what I experienced on my 09 Mac Pro tower.
Any insights on getting better playback performance in this scenario would be greatly appreciated.
Thanks!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6253414#6253414
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6253414#6253414
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6253414#6253414. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Premiere Pro CC and the new Mac Pro - are all upgrades necessary?

Monday I'm ordering the new Mac Pro because my Mid 2012 Mac Pro tower is simply too slow and crashy no matter how much money I sink into it. Thing is, every little upgrade I add onto this new Mac Pro is very expensive, so I want to make sure I don't add anything that won't make a difference in edit performance.
My ultimate goal is to be able to work with 4k, and even 5k footage in 2014. More and more clients are giving me Red media, and my system right now can't handle it (I have to render proxy files for everything).
Attached are my hardware upgrade options for my processor and graphics card. These options can only be offered when I order the computer. Neither the processor or the GFX card can be changed by me later. Note that these options alone almost double the computers's price (3600). As of now I assume that getting the fastest everything is the way to go, but is there any reason I should not go this high?
jesse

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?"

After Effects and the new Mac Pro

I recently got one of the new Mac Pros and it doesn't get along great with After Effects, particularly when it comes to ray-tracing. There is no Nvidia GPU option for the new machines, so ray-tracing defaults to CPU. But then, even with a simple solid, it gives you an out of memory error. I've seen postings saying this is fixed in 12.2 but I've got 12.2 and the newest CUDA driver installed and run the machine with all other apps closed, but no luck. Presumably I'll figure out how to get it running after a fashion eventually, but even then, even with the new machines' many fast cores etc, CPU ray-tracing on the new Mac Pro is not looking promising on the speed/usability front.
Element 3D is an option, but its reflections can't interact with the comp the E3D object is within, only with the environment map in the plug-in itself, so there are many cases where it's a poor substitute.
My question isn't really how to get ray-tracing to work with the new machines. That would be great, but my sense is the answer there is, it effectively can't.
My question is, given that motion graphics increasingly involve the complex interplay of light, reflection, transparency, and three dimensional objects, and that from here on out Mac Pros will no longer accommodate nvidia cards, and that many creative types will only work on Macs, how long will this state of affairs continue? How long can it continue? Are there any plans to make After Effects fully functional on the new Mac Pros? Ray-tracing has always been balky and wonky and prone to error messages and crashes, but despite all that it's also an indispensible part of After Effects.

A fun update, long after the fact:
So I've learned Cinema 4D in order to reacquire the capability After Effects once offered internally and have succeeded after a fashion. Let's look at the relative ease of the new method versus the old one using a real-world scene from my project: Adding a bus shelter over actors on a bench.
In ray-trace enabled After Effects of old, I could draw simple draw shapes in Illustrator, extrude them into objects, collect them under a null and position it in my scene. Particularly powerfully, I could bend 2D photograph layers into half-domes for a fun roof, and create planes of transparent glass of any thickness I chose with refraction levels that made for interesting visuals as actors moved behind it, and add reflectivity to any layer I chose -- including the dome roof, for instance, which would then pick up the reflections of any other objects in my scene. I could also put 2D layers in front of my bus shelter as easily as placing a layer closer to the camera than the makeshift model. Well, sometimes it didn't work as advertised; sometimes you also had to have the foreground layer above the background one in your comp even when both were 3D and that wasn't supposed to still apply, but at least it was After-Effectsy. The whole thing was After-Effectsy, which of course is good because presumably AE users know AE, but also it was similarly logical.
To achieve a similar end with C4D and Cineware, all you have to do is this: Build your bus shelter model in Cinema 4D. Wait, first learn Cinema 4D, a hugely complicated piece of software. Come back in 3 months, I'll wait. Hi again. I see you've built your bus shelter. In fairness, you were able to add textures and complicated curves you couldn't in After Effects. But then you always could, if you were willing to learn a hugely complicated piece of software. Anyway, let's get that model into after effects. Just drag that C4D project into your AE project and put it in the comp. Put other layers in front of it or behind it. Easy! Now just a few caveats. 1. Scale. There is no formula available anywhere for the relative scales of your two projects. So tweak that. Just go back and forth between the two software suites -- I hope your computer can have both up and running at the same time! -- until you get that right. 2. Cameras. You can import your AE camera into C4D and vice-versa as easy as pressing a button in Cineware. It shows up somewhere strange in C4D unless you use a workaround unless you are also camera tracking in AE in which case you can't. 3. Scale again: Your camera will match its moves in both suites now. But they are drastically different sizes. If you import your C4D camera into AE it becomes tiny tiny tiny, if the scale of commercial C4D models is to be considered at all standard. Just shrink your model down to say 1% and you should be good to go. And if you tweak your camera in AE or C4D, you have to junk your imported camera and re-do that step. 4. Reflectivity. Your C4D model will only reflect items in your C4D project, not the, um, scene it's going in. 5. Refraction. Transparent C4D items will indeed show your AE items behind them. But you can't add refraction. 6. I've saved the best for last. Say you want your actors in your bus shelter, meaning part of the model is in front of them and part behind them. You used to place them (shot on a greenscreen or roto'd) in the bus shelter model. Now you simply do this: Divide your bus shelter model into halves, the in-front half and the behind half. Put both under nulls. Give the front null a C4D "tag" called compositing. At least its name makes sense. Then go into the tag and enable a numerical "object buffer." You're almost done! Next simply go into "render options" in C4D and into "multi-pass" there and then enable object buffers again there, so intuitive! Make sure to enable the same numerical object buffer you enabled in your compositing tag. Good? Good! Now, all you have to do is place two copies of your C4D project heirarchically in your AE project. You're still almost done! Now all you have to do is go into "multi-pass" in your Cineware plug in in the instance of it that goes in front of the actors and specify your numerical object buffer again. Wait, one tiny thing: If your Cineware plug-in is still set on the default "Standard" setting that option will be grayed-out. Just switch it to the much slower-rendering C4D opions and you're good to go! And don't worry about two copies of your C4D project in your AE one meaning it will now take twice as long to render, because it will. But, as a bonus, you've probably learned a lot of ways to render C4D models really well when learning C4D because Adobe made you. So you can use those to make your AE comp really shine... or wait, could, but they're not supported. You can however render it in that flat ugly video early Pixar style, but life is full of trade offs, no? You end up rendering out the layer you need in C4D and comping it into AE exactly as effects artists have done ever since always. Which is to say AE gave up even trying to do 3D and sent you into the waiting arms of a more-capable competitor, their seeming specialty in the world of video. Maybe it's better this way. AE was only ever for comping. It briefly got a swole head. Now it's back in its comfort zone. The end

What are your opinion on the new mac pro

I feel while radical its too limiting thereby loosing fuctionality. But I also knw how the iSheeps would follow their iSheperd blindly. There making this kind of thunderbolt for everything the norm. I also know that the PC companies brought this on themselves they failed to innovate followed intel and nvidia to blindly with there xeons and quadro. The 3 major pc makers market professional workstations that you would probaly sell ur kidney to get one we have the z820 while very powerful its just 2 xpensive. Let's take for example the imac is the best bang for d buck most beautiful all in one if hp had used say a normal 3770k and a gtx 680m 4gb dat would have brought the price of the z1 down drastically. Let's say d average joe wants to be an editor, compositor, colorist. if u goole pc workstations hp z820 and dell T7600 would pop up but they are dam so xpensive hp consumer PCs are garbage. If there is onething apple knows the average pro does not want to be bothered with specs. I think the pc industry brought this on themselves. Wat of the smaller custom builder they focused so much on gaming big megatron design like cases with all the talk of FPS is every thing. My only prayer is that asus, msi gigabyte should stand up aganist apple and start releasing sexier designs, unless I fear even adobe is not safe cos most editors would gradually drfit back to FCPX sad wen inferior products triumphs a superior one. Pls drop ur thoughts also ur opnions as editors in your location the general trend. I hate to be locked in a garden where I am told this is what I need. I love choices.

The 2 biggest problems with the new Mac Pro are the complete reliance on Thunderbolt for expansion and the Proprietary GPU modules. What happens when those Fire Pro cards are EOL and new GPU's are available. Will Apple go to any of the GPU manufacturers and get newer modules manufactured. Considering the applications that are moving to GPU processing, that was really a very bad idea simply because of the Minimum order quantity Apple will have to make to run another module. Apple will not be able to pull from the general video card supply which means they will be solely responsible for any production numbers required to manufacture to begin with. I personally expect this to be a major limitation as time goes on.
The complete reliance on Thunderbolt for expansion really was bad idea and not ready for prime time. TB2 has the total bandwidth of a PCI-E Gen 2 5x. That is the entire pipe available to pump any video output data, high performance storage, I/O devices, and any number of devices available as time goes on especially video cards. Those trying to GPU process through that pipe are going to find that latency is way to much a problem to get that done. If Lightpeak was out and had the bandwidth of PCi-E Gen 2 or Gen 3 16X then I would say great. There is just to small a pipe and to much device moderation at the TB controller to do this now. The major problem that will develop from this later is when Lightpeak is out for the PC and devices start moving there. Where will Apple be with the Mac Pro when it's entire expansion is legacy in 1 to 2 years. As a final note Thunderbolt 2 is just Thunderbolt 1 with 1 bidirectional channel in stead of 2 unidirectional. This is not a major improvement over the original.
The final consideration though not a major problem yet is the limit to 6 Core Xeons. This is likely due to the heat the 8 Core Xeons generate combined with a centralized cooling design. One of the major reasons to get a Dual Xeon is the 8 Core CPU options. Without that then there really is far less reason to get a Dual Xeon over a single 6 core and eventually 8 core workstation. This is a sacrifice that will reveal more later than now.
Considering the Mac Pro is meant to be the flagship platform for Apple's Pro market, there are really way to many limitations on this one to compete with the PC equivalents. There is only so much OSX will add to any system.
Eric
ADK

Does the new Mac Pro(Later 2014) had an Audio-In port?

I want to convert a cassette tapes in digital files using my new Mac Pro(Later 2014). Does it have an Audio-in port and where it is located?

The new Mac pro has:
Combined optical digital audio output/analog line out minijack
Headphone minijack with headset support
HDMI port supports multichannel audio output
Built-in speaker
If you want digital audio in:
MacPro (late 2013): Digital audio in - how?

What kind of monitor is recommended for the new Mac Pro?

I want ot upgrade to the new Mac Pro from an imac, but what kind of display/monitor would be recommended and how much might it cost?

There are lots of 27"-30" monitors that would work, with the right connector adaptor. Many sell for around a 1/3rd of an Apple display. Personally, I like Samsung monitors, but LG makes some very nice ones, and even Dell's monitors are often quite good. Acer has some nice large screen monitors out too, and while the name might not be commonly known to many people, they are and have been a major equipment manufacturer for decades now and their quality is usually pretty good.
Keep an eye out for sales in the coming weeks and go look at some, preferably side by side.
You should be able to pick up something good in the 25"-30" range for easily under $500/$600 USD (on sale, perhaps well under $300).

How do you physically secure the new Mac Pro's?

Similar Messages

Maybe you are looking for