How do you sample a mux channel, save the data in a digital indicator on interface, then sample the next channel

I'm using labview 6.1. I want to sample a channel, see if the voltage is within a designated range, post a flag of either good or bad to the interface, and post the voltage measured on the interface, before reading the next channel. I'm a VERY new user to labview and these trivial tasks seem very hard to figure out. Thanks in advance for any help

Justing,
To accomplish this task, I would suggest that you use AI Sample Channel.vi (Functions >> Data Acquisition >> Analog Input) to acquire the data and the In Range and Coerce function (Functions >> Comparison) to determine if it is within the designated range. I have created a quick example implementing this architecture and attached it below.
Good luck with your application.
Spencer S.
Attachments:
IN_RANGE.vi ‏40 KB

Similar Messages

  • How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

    Question
    How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

    '''IT'S A EASY AS IT SHOULD BE.'''
    This is essentially paulbruster's answer, but I've added the steps some might assume, but which aren't so obvious to those of us who are new at this, like me.
    This solution might ''appear'' to be long and complicated, but after you follow the directions once, you'll find it's quick, clean, and simple. Almost like they designed it this way.
    # If you haven't already, open a bunch of tabs on a few different subjects.
    # Click the List All Tabs button on the right side of the tab strip.
    # Select Tab Groups.
    # Create a few groups as described [http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-create-a-tab-group here] , i.e. just drag them out of the main thumbnail group into the new groups they create.
    # Now click on any thumbnail in any new group, but not the original big default group you may have left some tabs in.
    #A regular Firefox window will open, but'' only the tabs in that group will be visible.'' You also now have the Tab Groups button in the tab strip.
    # Right click on any tab, and there it is: Bookmark All Tabs. Click on it in the list of options. Or you can hit Ctrl+Shift+D instead and go straight to the dialogue box from the tab without any clicks. But don't go looking for this familiar option anywhere else, 'cause it's not there.
    # Now pick an existing folder or create a new one just like you would have before and '''shlpam!''' there they are. New folders are supposed to end up in the Unsorted category all the way at the very bottom, but for some reason mine show up at the bottom of my last sorted category.
    # DO NOT CLICK THE UPPER-RIGHTMOST X to close this group of tabs. This will close ALL of your tabs in all groups, currently visible or not. At least it asks if you're sure first. Instead, click your new Tab Groups button to return to the Boxes 'O Thumbnails window, and click the X in the group box you just bookmarked.
    # Click on another thumbnail to repeat the process with another group, or click on a thumbnail in the big default box to return to the original FF window. You can also click the Tab Groups button at the upper right, or Ctrl+Shift+E, which will also get you ''into'' the Boxes 'O Nails window ''from'' FF.
    # So now when you reopen FF after shutdown, simply select your folder from your Bookmarks and Open All in Tabs. '''Just like paulbruster said. '''

  • I am using CS3 and want to save a file as a pdf where someone can then edit the text. How can I do this please? Thank you :)

    I am using CS3 and want to save a file as a pdf where someone can then edit the text. How can I do this please? Thank you

    You might be able to use the newest adobe reader program/application for that.
    You would have to save your pdf out of photoshop cs3 without any text and then add the text to the pdf in adobe reader.
    The text added in adobe reader can't be edited in photoshop, so the other people would have to adobe reader or acrobat to edit the text.
    https://helpx.adobe.com/reader.html

  • How can you delete an app without losing saved data/progress?

    How can you delete an app without losing saved data/progress? Is there a way through iCloud? I have an 8gb 4th gen iPod touch. I have a lot of music, so with 8gb, space is limited. Some apps I have take up 20-30 MB. Some of these games I don't play that much, but I don't delete them because I have made a lot of progress (levels, scores, acheivements). It would be nice to delete some of these 30 MB apps that take up precious space, and them redownload them in the future when I have more space, but without having to start the whole game over.
    Also, I read somewhere that there might be a way to do this with iCloud, but I don't really know how.
    Thanks!

    This is the only way I know of.  It is messy though.
    How to transfer game saves between iOS devices, without iTunes, and without jailbreaking | TUAW - The Unofficial Apple Weblog

  • How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

    How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

    JasonFromSK wrote:
    With the newest Airport firmware (7.6.1), it seems I should be able to do this.
    Really? I need to check that out!
    You should certainly be able to add content by reference to itunes from such a disk (even before the update) - so long as itunes knows the location of the file (set Preferences not to copy to local library when adding the media) it will stream it to AppleTV if the disk is available.
    I hope you're right, but I'd be surprised if current Extremes can be upgarded to provide a full Home Sharing service - marvellous if they can but I'd be surprised as i've long said we need an Apple media server either based on TC or AE to do this kind of thing.
    AC

  • How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

    How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

    You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
    The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
    The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
    So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
    If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

  • How would you go about retrieving your backed up data?

    How would you go about retrieving your backed up data from the Time Capsule?
    I have mine on auto back up (initial back up took 3 days)

    Time Machine FAQ

  • How do you create a stand alone application using DAQmx when your application SCXI hardware isn't on the computer I am using to create the application?

    How do you create a stand alone application using DAQmx when your application SCXI hardware isn't on the computer I am using to create the application? The DAQmx assitant won't allow me to create a task with hardware that isn't in my system.

    You will need to have at least the DAQ device in your computer to add the chassis. When you add the chassis, don't auto detect the modules. You will have to add the terminal blocks and tell MAX which SCXI module will be connected to the DAQ device. Just make sure you don't test the chassis, when its not there.
    I hope this helps.
    Joshua

  • How do you auto connect to a PC server resource on re boot w/o having to type the username and password to that resource?

    How do you auto connect to a PC server resource on re boot w/o having to type the username and password to that resource?

    Open the server as you normally would. When you enter your password, click the box to "remember Password". Once mounted, select the server icon from your desktop and hit Command + L to make an alias. You can move that alias to some place out of the way if you wish. The go to System Preferences/Users and select your user profile, then Login Items. Simply add the alias you just created. Now every time you boot you will automatically be connected to that server.

  • HT4859 how do you access iCloud to access your backup data if your passcode is forgotten?

    how do you access iCloud to access your backup data if your passcode is forgotten?

    If you mean you forgot your iCloud ID password, go to https://iforgot.apple.com/password/verify/appleid and reset it.

  • When copying one of my old cassettes to a CD how do I get the data - album name, artist, etc. to show up when the CD is inserted into a player?

    When copying one of my old cassettes to a CD how do I get the data - album name, artist, etc. to show up when the CD is inserted into a player?

    To what format file are you saving from Audacity?  Although technically AIFF format can save data tags within the file itself I have not found this to always work with all applications.  Likely the information you enter into Audacity is just being saved in the file name.  When you add this file to iTunes, if iTunes cannot find tags it recognizes it will simply add the track with the file name as the track name.  You need to add the tracks to iTunes, then enter the information using File > Get Info for a track or series of tracks,
    Some of the above information may vary slightly depending upon the file format being used.
    It helps when asking questions here to provide as much information at the onset as possible.  We didn't know until this stage that all these menus were in fact part of Audacity and not iTunes.

  • How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

    How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

    If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
    That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
    This page is a good starting point for learning about Flex and PHP communication:
    http://www.adobe.com/devnet/flex/flex_php.html
    Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

  • I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

    I have a macbook pro core i7 mid 2012
    And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • How can I programmably extract the project build information set in the project build specification. So I can then use the information in an 'About' dialog.

    Extracting Project information
    How can I programmably extract the project build information set in the project build specification.
    So I can then use the information in an ‘About’ dialog.
    Dave

    In the labview\resource\appbuild folder their are some VI's that can deal with build specs! They return a variant containing the data!
    It's the reason I build a variant probe.
    Be aware that the build info is not present in th lvproj file of the built executable!
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts?  Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill.  HELP!!

    How do i see a list of the apps that have been downloaded and the dates and times and amounts?  Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill.  HELP!!

    See this -> http://support.apple.com/kb/HT2727

Maybe you are looking for