How do you set a "fixed background"?

I want my iWebsite to have a background picture that starts from the top, but for some reason it's not that easy. The picture is 5000x5000px and it looks fine on my screen when sat to side-by-side, but on other screens, especially on tablets and smartphones, it just doesn't work. I've tried editing the url(website) repeat scroll --> url(website) repeat fixed. But it doesn't work. Does anyone know how to do this? This is the website: http://dl.dropbox.com/u/19707357/Minecraft/Minecraft/Test.html and this is how it's supposed to look:

You would paste it into an HTML Snippet on every page of your site.
iWeb produces enough code without loading it down with extra stuff like this. To use javascript to change one item in the page design is kind of ridiculous.
The kind of layout you are designing is used a lot. The content width is locked down to a specific number of px. The header and footer are outside of this so that they are full width no matter what width the browser is on PCs. There are lots of free stylesheets around that you could easily modify for your own use.
If you are comfortable with some coding, you could build a site like this with an editor and use a master stylesheet. You will have a much faster loading site with a fraction of the code that iWeb uses.
The main advantage of creating it this way is that you can make the content responsive as well as the header & footer.
Here's a rough example showing the full width header and footer and a content width that has been given a maximum width to stop it expanding all over the place on computers.
Note how the navigation style changes, the columns fold and a back to the top button appears on narrow browser widths and devices like smart phones.

Similar Messages

How do you set a transparent background when adding an image?

I've added a block arrow image to a slide in Captivate 4. I enabled Transparent background and selected white as the color within the Image properties. This used to work when I added the same image in Captivate 3. However, in Captivate 4, when I publish, the image displays with a white background. Though it is transparent in priview mode and on the slide iteself when i have the project open. Any ideas on what else I could do to make the image background transparent?

Hi there
Transparent background should still work in Captivate 4 just as it did in Captivate 3.
There are a couple of reasons it may not do what you are expecting.
The background isn't truly the color it appears to be. For example, it may APPEAR to be solid white (or another color) but in reality it's hundreds of varying shades of the color. This happens a lot with JPEG images.
If the image is PNG format, I've seen Captivate become confused. Especially if the PNG already has a transparent background. So you may need to edit the image and save in a different format.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How do you set a image in the background of a JTextfield?

How do you set a image in the background of a JTextfield? Any ideas?

You can't thats why it is called textfield!!!
Take a look at JScrollPane API for this

How do you set an image into the background of a JPanel or JFrame?

How do you set an image into the background of a JPanel or JFrame?

Something like this, Ive thrown in an ImageIcon on a
button too for good measure.
import java.awt.*;
import javax.swing.*;
public class JFrameImage extends JFrame {
public JFrameImage() {
Container c    = getContentPane();
JPanel panel = new JPanel(){
             public void paintComponent(Graphics g)     {
ImageIcon img = new
= new ImageIcon("background.jpg");
                  g.drawImage(img.getImage(), 0, 0, null);
                  super.paintComponent(g);
        panel.setOpaque(false);
ImageIcon icon = new ImageIcon("onButton.jpg");
JButton button = new JButton(icon);
panel.add(button);
c.add(panel);
public static void main(String[] args) {
JFrameImage frame = new JFrameImage();
frame.setSize(200,200);
frame.setVisible(true);
Going totally fancy pants
ImageIcon bigImage = new ImageIcon(bgImage.getImage().getScaledInstance(getWidth(), getHeight(),Image.SCALE_REPLICATE));
g.drawImage(bigImage.getImage(), 0, 0, this); Will scale the image to the size of the panel
whereas
for (int y = 0; y < getHeight(); y = y + image.getHeight(null))
for (int x = 0; x< getWidth(); x = x + image.getWidth(null))
g.drawImage(image, x, y, this); Will give a tiled effect
Try tiling with an animated gif and bring your processor to a standstill.

How do you set a background image in Pages?

I have a simple question. How do you set an image to be the background of a Pages '09 document? How do you put a JPG image behind your regular body text? Surely it's possible, but I can't figure out how to do it.

You just didn't took care to the status of your picture.
It was an inline one
Change its status to floating and the menu item is no longer grayed.
This kind of features are described in Pages User Guide which is also for you
Yvan KOENIG (VALLAURIS, France) mercredi 13 juillet 2011 22:40:00
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do you set the text of a Hyperlink component in code

I am using Visual Web pack in NB 6.0. How do you set the text of a hyperlink component in code?
Please see screenshots at
http://coba.usf.edu/departments/isds/faculty/agrawal/projects/java/
I have a hyperlink in a grid panel. I am using
hyperlink1.setText("Hello"); in prerender(),
but the Hyperlink shows up with the text "Hyperlink", whereas I was expecting "Hello". However,
hyperlink1.setUrl("http://www.usf.edu"); works as expected.
I tried nesting a static text in the hyperlink as suggested in the Creator guide (ed 2, Google project). I deleted the "Hyperlink" text in the properties editor but then the page turned out blank.
Thanks
Manish

Hi Manish,
Great to know you were able to fix your issue. The following blog entry has the list of resources you would like to look at for future.
http://blogs.sun.com/NetBeansSupport/entry/useful_resources_for_visual_web
Thanks
K

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

How could I set a fixed window for all resulution?

because I design the website in MAC when I transfer to PC it
change shape
how could I set a fixed size window for all resulution?

Using layers for page layout is just asking for trouble.
Trouble with
centering content, and trouble with expanding text.
Use tables until you can manage a proper CSS layout scheme,
i.e., NOT
layers. Start here -
http://www.projectseven.com/tutorials/css/qdmacfly/index.htm
http://www.macromedia.com/devnet/mx/dreamweaver/css.html
http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Media Fusion" <[email protected]> wrote in
message
news:[email protected]...
> What would you suggest then, and why not layers? I am
just going off of
> what I
> know and I am completly open for correction or cretique
on process,
> thought
> process etc...
>
>
quote:
Originally posted by:
Newsgroup User
> Ugh.
>
> Layers? Surely you jest?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Media Fusion" <[email protected]>
wrote in message
> news:[email protected]...
> > yes excatly, nothing should change when you bring
the files from mac to
> > pc, the
> > only thing that may be a slight issue is how you
coded the fonts for
> > text.
> > As
> > long as you set it up with pretty universal fonts
not much should
> > change.
> > I go
> > cross platform all the time, code is code. If you
want to really contain
> > the
> > positiong and location of your site design look in
to using layers in
> > combination with tables. That fixed my problem with
how different
> > browsers
> >
>
>
>
>
>
>

How do you change the dashboard background in os x mavericks?

How do you change the dashboard background in os x mavericks? plz help!!!

I just discovered this by mistake.
Select the picture you want as background, and in the Services menu (or contextual menu) choose "Set Desktop Picture". Then immediately switch into the Dashboard while this command is being processed.
I was trying to change my regular desktop but discovered this changed the Dashboard background instead. I presume it is because Dashboard is considered a Space and different Spaces can have different Desktops.

[ANSWERED]Which terminals let you set a random background image?

Many terminals nowadays let you set a background image on the terminal itself.
Which terminals let you set a random background image from a directory or list of images? Also need to be able to have multiple terminals with different background images open, so having a script that moves around images won't work.
I like this because when you have lots of terminals open, you can associate each with their background image. Also if your background image isn't a tiled thing or a stylized gradient (such as a human, etc), it might look bad when duplicated all over the screen.
I could use transparency, but I don't like psuedo transparency, and real transparency comes with all sorts of problems. (For me at least.) I would still prefer having multiple background images though.
Konsole and eterm are the only two I know that can do this, but konsole is KDE, and eterm has no unicode support, is dead (I think), and is ugly.
Last edited by sokuban (2008-12-31 21:20:12)

So now that time has passed and I'm on a clean new install, I decided to try out uxvrt again. The good news in that now I can type in it with scim. I have no clue how or why, but it means the greatest hurdle is gone.
I also even managed to get a good looking English font.
urxvt*font: xft:Monospace:pixelsize=12
Only problem is a readable east asian font. The default font is a mess and everything is squished together. If I explicitly select an east asian font, then there are huge spaces between each letter, even for english. So I find out this is a known bug, and I find a patched aur package for it, but the patch doesn't seem to make a difference.
I know urxvt lets you select a main font and a secondary font and so on. Maybe I did the syntax wrong. I tried both:
urxvt*font: xft:Monospace:pixelsize=16
urxvt*font: xft:WenQuanYi Zen Hei:size=9:antialias=True
and
urxvt*font: xft:Monospace:pixelsize=16,urxvt*font: xft:WenQuanYi Zen Hei:size=9:antialias=True
Neither of them worked. From what my understanding of what the man page says, the size of the cell is supposed to be based on the main font, but in both those cases the secondary font stretches the cells.
Can anybody reccomend fonts for east asian scripts that work well and show me your .Xdefaults ?
FAKE EDIT: I just thought of an idea, and it kinda works:
urxvt*font: xft:Monospace:pixelsize=16,xft:WenQuanYi Zen Hei:size=9:antialias=True
Now I get a readable font, but massive spacing issues between Chinese Characters.
EDIT: About the pixmaps, I got a script to randomly select and image and all is fine, but I can't seem to find a way to disable scaling. I can set the size of the picture by a percent, but it doesn't let me use decimals and it is impossible to get the exact resolution of the picture to display. (Unless I let it tile, but the pictures I am using aren't meant to be tiled.) Is there a way to either disable scaling, or set the urxvt size in pixels so I could make it exactly 640x480. The urxvt man page says that a scale of 1 disables scaling, but it seems to have no effect.
EDIT2: I just noticed I can't use scim now. I have no clue why, but I think compiling it with afterimage support breaks it.
EDIT3: I found out why scim was not working/working. I had to add this to my ~/.scim/global:
/SupportedUnicodeLocales = en_CA.UTF-8
I also got a script that works, kinda:
#!/bin/bash
image="$(ls /usr/local/share/cgs | sort -R | tail -1)"
urxvt -pixmap /usr/local/share/cgs/$image\;86x100
The only problem is that I don't know how to get urxvt -pixmap to keep the aspect ratio of the image. 86x100 is the closest it will let me get to the actual aspect ratio, but it is off slightly. Barely noticable. The man page says that propscale will do this, but it doesn't seem to work.
Either way, for now, I am just going to use 86x100.
Last edited by sokuban (2009-03-22 02:01:45)

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do you Set up a Family Pack sub-account

how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
please help
Denis

Thanks Shepart
when i activated the account i ticked the upgrade button, should i have ticked the new account button?
anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
i think i hit a brick wall !!
Cheers
Denis

How do you set up separate facetime accounts under one apple id

how do you set up separate facetime accounts under one apple id

This is possible, but I haven't found any official Apple topics about it, so I will share a nice web article about it on a Mac fan website:
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Hope this helped!

How do you set a "fixed background"?

Similar Messages

Maybe you are looking for