How do you set auto retry on sending email?
I have a problem that sometimes when sending an email from iphone4 that it won`t send if out of signal but doesn`t seem to then automatically send when signal strong enough. Is this normal and is there anyway settings can be changed to auto retry on sending?
It is my understanding with a message that cannot be sent for whatever reason and remains in the Outbox mailbox, the message will be sent automatically when an internet connection is re-established when selecting the Mail app. There is no setting for this.
Similar Messages
-
How do I set up groups to send email ?
I would like to send emails to a group of contacts, how do I set up the groups.
Hi WeTee,
I am not aware of a way to create email groups/lists on the iPad without a thrid party app. Here are two apps that'll do it for you:
MailShot: https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email: https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
Hope this answers your question!!
~Joe -
Question - When I try to send an email on my Iphone4S, it responds "Cannot send mail. A copy has been placed in your Outbox. The recipient was rejected by the server because it does not allow relaying." How do I fix this problem?
Problem has been solved thanks to a posting by AmberDrivingKendal on 5/15/11. More Like This section was a great help.
-
How Do You Set Mail To 'Manual' ?
Never had problem with iPhone until yesterday. I am not receiving 'push' e-mail anymore. I did not do any changes to the iPhone at all. Any e-mail now I have to go to inbox and click on the curved arrow symbol at bottom left of page in order to load the waiting e-mails. In a different posting someone mentioned to test 'push' function by setting e-mail to 'manual' and then sending your Yahoo account an e-mail from your computer (I assume using a different e-mail service). In the 'settings' menu for 'mail' I do not see where you set for 'manual'. How do you set mail to 'manual' setting? And do you think I should just RESET the iPhone (using the iPhone or hooking it up to iTunes on the computer to RESET) ?
I have no other e-mail accounts set up. Anyway I did RESET my iPhone (using the RESET button on the iPhone) and all is well again (how long I do not know). My e-mails are being 'pushed' again so that I can see from the main menu the little red dots (with the numerals inside) showing how many e-mails are waiting for me. I love this feature. I had 'push' e-mail on my ex-Blackberry. BUT, I do not see the AUTO-CHECK anywhere. I am heading over to the Apple Techies at my local Apple store to ask them about this missing AUTO-CHECK. I have a feeling you need two account set up on your iPhone for this feature to appear. I could be wrong. Thanks, everybody........
-
How to set up ical to send email AND message alerts by default
How do I set up iCal to send me an email alert and a message with sound 15 minutes before the event by default so that I don't have to remember to do this everytime I add an event in iCal (which by the way I can't remember)?
Thanks for your help.Why not search for iPhone setup instructions on these forums? I have posted exact step by step instructions or configuration summaries at least three times in the past 6 months on this topic.
Here's one ....
http://forums.verizon.com/t5/Verizon-net-Email/Itouch-is-connected-but-can-t-get-email-to-work-from-...
The above one specifically deals with Verizon mail via the Yahoo portal. For Verizon regular mail you would modify as follows:
POP Account Information
Name: Joe User
Address: [email protected]
Description: Verizon
Incoming Mail Server
Host Name: incoming.verizon.net
User Name: [email protected]
Password: ******
Outgoing Mail Server
SMTP outgoing.yahoo.verizon.net ->
Primary Server ->
Host Name: outgoing.verizon.net
User Name: [email protected]
Password: ******
Use SSL: Off
Authentication: Password
Server Port: 587
Advanced
Deleted Message
Remove: After One Week
Incoming Settings
Use SSL: Off
Authentication: Password
Delete from server: Never
Server Port: 110 -
When I send an email the rely comes into another account in my apple email. How do I set it so that my email comes to the correct address?
Hi Sunny C,
Welcome to the Support Communities! The "From" field should be showing by default, but you can check or change your settings for Mail with the instructions below:
Mail (Yosemite): Set Mail preferences
http://support.apple.com/kb/PH19178
In the Composing pane, you can set the email account that you want to send new messages from.
Also, check the View command on the Menu bar. View > Message Attributes should have a checkmark beside the "From" field.
Cheers,
Judy -
How do you set the setting in iPhoto to ask before deleting a picture?
How do you set the setting in iPhoto to ask before deleting a picture?
If you delete a picture, it sends it to iPhoto trash (left column), there you can permently delete using the empty trash with the icon in the upper right corner. It will come up with a warning if you want tp permently delete trash (photos). It the iPhoto trash you can drag them back out, once you empty the trash, they are gone.
You can also go to finder preferences>advanced, and unclick secyre empty trash, and make sure show warning before empting trash is clicked. -
How do you set the amount of time the screen stays lite after your last use?
How do you set the amount of time the screen stays lite after your last use?
Settings>General>Auto-Lock.
-
We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it. -
How do you stop auto play only go to next slide on click once published Version 7
How do you stop auto play only go to next slide on click once published Version 7? I mean to stop the play slide bar moving down the bottom?
Thank you, I already have click boxes and buttons on every slide - the slider at the bottom still automatically moves, it doesn't go to next slide until button or box is clicked. I want to stop it moving if possible?
Update: looks like it does the same on the old versions - I'm assuming its the time set to play each slide. I will just even these up so the don't look so inconsistent. -
How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?
unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups -
How do you set up Port Forwarding for ARD 2.2 in AEB N?
Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
JimTry the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products) -
How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?
To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri -
How do you Set up a Family Pack sub-account
how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
please help
DenisThanks Shepart
when i activated the account i ticked the upgrade button, should i have ticked the new account button?
anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
i think i hit a brick wall !!
Cheers
Denis -
How do you set up separate facetime accounts under one apple id
how do you set up separate facetime accounts under one apple id
This is possible, but I haven't found any official Apple topics about it, so I will share a nice web article about it on a Mac fan website:
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Hope this helped!
Maybe you are looking for
-
i need to transfer the new site i made in iweb through fetch. i know that i should replace the index.htm file in fetch with the new iweb index.htm file. but somehow, i cannot remember where i should get the index file... i have an iweb folder under m
-
To return or not to return that is the question.
good day. I just upgraded. days ago. Got a iphone 4s and the nex. I have been eagerly wating to upgrade to nex. I am a big fan of android... My phone is having signal issues i get half the signal i usualy get. only droped calls or not able to call ma
-
after downloading ML on my macbook pro, it could not be installed. it says that macantosh HD is damaged and ML can not be installed. what do i do?
-
Don't want floating images- how to make it stable
HI, I just want a static site where it all stays in its correct place. I put my button bar, header and headline in a div tag. Without it they wouldn't go in place-not lined up. With it, they float all over. Please see http://www.dancingfruitbook.com.
-
Connection of iPod to iMac - USB or Firewire
I recently got the 80 gb iPod. It came with a cable that connects to the usb port of the computer. My computer is an iMac G4 so I think it's got the older usb ports (not 2.0). I was wondering if I could obtain a wire that hooks into the iMac's firewi